Come for the spanners, stay for the beats. Phat tunes as always.
@Low7602 жыл бұрын
I thought the opposite. Annoying music.
@chaseweeks27082 жыл бұрын
Lol, perfect editing. In my head "Wait... will that" "Yes, it clears the bonnet." "Oh, ok then."
@jp22462 жыл бұрын
2:33 he knows the world of KZbin comments! Nice work btw!
@scottjackson49502 жыл бұрын
89mm is spot on 3.5 inches that's why
@BennysCustomWorks2 жыл бұрын
That makes sense being all US Hardware
@LightBranches2 жыл бұрын
88.9, but yeah, close enough!
@AlienLivesMatter2 жыл бұрын
@@LightBranches if you only got 89mm the .9 is really important lol
@TasTuned2 жыл бұрын
I literally just searched LS oil accumulator and saw that you’ve uploaded 2 mins ago!!!! Thankyou sir! 😂😂
@BennysCustomWorks2 жыл бұрын
:D long live the slug !!
@seanharvey34522 жыл бұрын
Nice work dude. I'm a hydraulic fitter, good to see someone on KZbin doing shit properly 🤣🤣🤣
@cyclonicleo2 жыл бұрын
That backing tune gave me Quench 'Dreams' vibes - old school Aussie trance at its best. Just needed a 4/4 kick drum behind it. Great to see the accumulator install, its another feather in the IS600's cap, making it much more resilient. Cheers Benny!
@shaunc46022 жыл бұрын
I love how many times you said dive on in. I hope it was a deliberate american dad reference not just an accident. On ya Benny 😂👍
@crofty38632 жыл бұрын
Nice happy Gilmore reference 😂
@gazzzzzzz3257 Жыл бұрын
Awesome video! Almost finished my rebuild on my drift/race car and now bought a accumulator to install because of your video!
@ThrottleStopGarage2 жыл бұрын
Great video - especially when you're coding the ECU for the accumulator. Thanks.
@notold372 жыл бұрын
Nice work, I understand what you have just fitted, but its out of my wheel house of skills, and I've used the universal bonnet prop by Oates, can get them pretty much anywhere, bloody great video Benny 👍🏼👍🏼
@Automotivated972 жыл бұрын
10:15 I had to hit replay 3 or 4 times, that was so slick haha
@ChrisFromTheInternet2 жыл бұрын
Love the preemptive response to internet experts... "yes it clears the bonnet" lmao
@vlfreak2 жыл бұрын
cool job, sick tunes. loved the extended mix 🎶👌
@navseal3452 жыл бұрын
Music choice is 👌!
@nickgrech96342 жыл бұрын
Great video Benny! Thanks legend
@ziyaadsr202 жыл бұрын
Benny..once again. Tunes on fcking point bro!!
@mrnicktoyou2 жыл бұрын
You really should explain what an oil accumulater is at the start of the video.
@craigm55112 жыл бұрын
The way you set up the solenoid to close as soon as it hits 35psi, won't that prevent you from being able to store full engine oil pressure in the accumulator for the next start up? Dumping 35psi into the engine when cold is good, but 60psi would be better :)
@BennysCustomWorks2 жыл бұрын
The solenoid is a diaphragm type so is effectively a one way valve so it’s always allowing more pressure in until it equalises. You only need to drive the solenoid to allow oil to return to the engine
@Lightningmacqueen882 Жыл бұрын
Benny just to add alittle further to this it would be just easy to open the solenoid with the reds on at anytime, then when you get a low power situation the accumulator will just take over and save the engine. Honestly no real need for a low pressure switch. Regards Michael
@rickyaldridge22452 жыл бұрын
You could make your 12v switched to your accumulator relay come from the key, that way it would hold the oil when you kill it and prime it and let the ECU control it while running??
@BennysCustomWorks2 жыл бұрын
The ecu also allows it to come on at 0 Rpm ( that’s how we set it up )
@jaydenbutler6184 Жыл бұрын
Would you have to leave reds on when draining the oil, so you can change the oil also in the accumulator?
@nedyahyakcam2 жыл бұрын
i seem to remember andrew hawkins having these in the back of jet200 and the gtr, so i think its fine to have it in the car
@nedyahyakcam2 жыл бұрын
also can someone show this to Cleetus McFarland, they seem to have endless issues with oil pressure
@swampdonkyy83592 жыл бұрын
Not "tap" ball valve 🤣😂
@markrobinson12912 жыл бұрын
Does the Moroso have a typical relief valve to the Accusump? If so check for leaks at the relief valve
@13smarts12 жыл бұрын
I have tried using BCW5 when i have bought from Sparesbox and can't get it to work, any suggestions ?
@chrisglenn9636 Жыл бұрын
Song is so badass. What is it?
@justincanny15712 жыл бұрын
have you got gates and baffles in your sump ?
@BennysCustomWorks2 жыл бұрын
Yes. It’s a gated/ baffled sikky sump
@ashkellybarr89802 жыл бұрын
need a normally closed solenoid, that way you dont need ecu to hold power to hold pressure in the accumulator when not running. means you dont need to manually turn it off too
@BennysCustomWorks2 жыл бұрын
It is an nc solenoid and the ecu only triggers is in the event of low oil pressure. Being a diaphragm type solenoid means it’ll allow pressure in but not out unless triggered. The ball valve is only to isolate the accumulator from the system.
@ashkellybarr89802 жыл бұрын
@@BennysCustomWorks ah sweet I miss understood your explanation and thought it was NO. I take it ecu has no delay on rising pressure witch is why you need to map “low pressure” to figure out what to set it too so I fills enough??
@BennysCustomWorks2 жыл бұрын
@@ashkellybarr8980 the ecu only controls it draining, not filling.
@ashkellybarr8980 Жыл бұрын
@@BennysCustomWorks ah right is there a check valve that bypass’ the solenoid?
@simonthompson86292 жыл бұрын
Hey Benny. You wouldn't have the pn for the valve you fitted to the accumulator, by any chance?
@BennysCustomWorks2 жыл бұрын
It came on it sorry.
@1Solace Жыл бұрын
Someone told me that oil accumulators are only appropriate for track dedicated cars tuned to idle above 2k because the pressure in the accumulator is more than in a fairly stock motor at idle. I'm not an expert but is there any truth to that?
@BennysCustomWorks Жыл бұрын
If you have the accumulator electrically controlled it’s never open at idle if setup properly
@jasonfletcher84442 жыл бұрын
Have you thought about what might happen if you have a crash ?
@gt40f10 ай бұрын
You should not use pipe dope on the threads with an oil system, additives in the oil will dissolve it, only use teflon tape.
@BennysCustomWorks10 ай бұрын
It’s teflon paste.
@StraightLineCycles2 жыл бұрын
Wish it was clear.
@ryanhunter73652 жыл бұрын
89mm = 3-1/2"
@GerardBendotti2 жыл бұрын
89mm = 3.5inch?
@BennysCustomWorks2 жыл бұрын
Freedom units didn’t even occur to me.
@benstrait3332 жыл бұрын
@@BennysCustomWorks Moroso is from 'Merica 😉 If they'd made it 90mm, they'd have us saying 3 35/64? WTF?
@daviddeakin20062 жыл бұрын
89 divided by 25.4 = 3.5 inches
@jimclarke11082 жыл бұрын
That's how my ex measured me, then left😁
@jimclarke11082 жыл бұрын
Hope there is no laws for subscribing😁
@mooroocho8342 жыл бұрын
Pressure tested 1984!
@MrVnssbt12 жыл бұрын
Wow mate that sump so low is scaring me please build something cool and cover it It looks to exposed don’t wana let that wreck a track day