ISDT P10 Dual LiPo Charger & BatteryGo BG-8S Review

[@DavidOwensuk]

I have both! Bought a while ago too! An awesome combination..

[@pink_kaju]

6:21 how do you use "dc power on CH1"? 12:01 Nothing happens on that when I press the button

[@pink_kaju]

worked after I updated the firmware.

[@dirtndronebai]

@@pink_kaju May I know which firmware version are you running your P10 now? I have the same issue with mine.

[@we4fm175]

In the process of getting into the rc hobby. Being a newbie how do you do a storage function or discharge function on a lipo seeing this charger doesn't have that feature?

[@achmadfauzihm]

for the lion battery?

[@numbskullfpv3656]

Top kit .. the discharger they do is brill too 🙃

[@BlessingsNFaith]

Why do my charger say input voltage lower than 11.1 and it's not letting me charge my battery

[@richmiller540]

Does this storage charge, I know you said it doesn't discharge but will it charge up to storage voltage.

[@MadRC]

You can yes Manually set it to 3.85v.

[@leginyela]

Where's the links Ian?

[@mingchenzhang3113]

how much risk is there to store lipo in room temperature while not charging or discharging?

[@shadow7037932]

Little risk. But you should store your LiPos in lipo bags just in case.

[@Cre8ionz.]

Storage voltage is much saver.. Fully saved = more energy saved in it - so more smoke and fire can come out of it than a "discharged" one (3,70 to 3,8 Volt is my storage voltage.. )

[@Cre8ionz.]

Damaged cells are more dangerous.. And if a battery smells like "candy" / sweetish it's dying - dispose it.

[@brianblogg645]

when testing SBUS you dont need an extra battery connected to the BG-8S it will power up from the SBUS connection alone, works on my BG-8S hope that helps.🙂

[@shadow7037932]

Ooo that's pretty handy.

[@RubyS.1]

I'm slowly doing the same thing no more parallel charging for me. Mainly so I can monitor the IR in the cells. I live in California we need no help with fires

[@MatthewTaylor3]

I find my batteries experience random cell failures whenever I parallel charge. I now only Parallel charge the batteries to 80% capacity, then charge them individually to 100% now. For this, I have 2 chargers to aid with the process.

[@RubyS.1]

@@MatthewTaylor3 that's kinda what I've had happen. I was low amp charging some really expensive packs and one cell puffed really bad that one pack would have paid for 4 little isdt chargers. I do like the idea of charging to 80%

[@MadRC]

This is a great move. Parallel charging does add in so much more risk. For the cost of these cheap chargers it’s simply not worth it now. You can spend a few hundred and know you much safer. It’s cheaper than a new home.

[@shadow7037932]

I spy the Gamers Nexus mat ;)

[@haydnholder7090]

Anyone having issues using a parallel charging board with it?

[@MatthewTaylor3]

BattGo is dead. Why is ISDT still placing the feature in their chargers for batteries that no longer exist?

[@nmfishdude200]

Did Horizon Hobby buy the tech?? I have seen some reviews about smart batteries being recognized by the BattGo feature on this P10... Meaning you can use the P10 like a spektrum smart charger. Also ISDT was hired to build all the spektrum chargers for horizon hobby so It makes sense but im not sure...

[@MatthewTaylor3]

​@@nmfishdude200 My understanding is that Horizon Hobby / Spektrum bought out BattGo just prevent any further developments. The last firmware update I got for my ISDT Q8 actually has the feature listed as "removed" in the list of "fixes".