iSpring RCCP Series RO System with Booster Pump DIY Installation | Step by Step

[@corgibird8338]

Please add the part about putting depth marks on the tubing so when inserted you know you put it in the fitting correctly.

[@willrobinson9575]

Measure 1/2 inch from the end of the tube and mark it.

[@journeyman2553]

Can I install the system in the walk-in basement directly below the sink cabinet and run a longer water line to the faucet?

[@iSpringWaterSystems]

Hi there. No. We do not recommend a delivery pipe longer than 10 ft. More than that, you would need a delivery pump.

[@claypipkin]

@@iSpringWaterSystems what is the purpose of the booster pump if not for delivery?

[@U2GuitarTutorials]

When I do the five minute flush the black line jumps around. Is that normal?

[@iSpringWaterSystems]

Hi there. It might be that your inlet water pressure is too high; that’s why the black line jumps around. Please, kindly contact us at [e-mail] or at [phone] M-F 8:30-5:30 EST// [phone] M-F 8:30-5:30 EST We are happy to help!

[@agreatd]

Is this a correct water flow out of a faucet? Mine is like this and it takes ages to fill a cup of water or wash something. Why can't it flow any faster?

[@iSpringWaterSystems]

Hi dear customer! The GPM of the RCCP series is 0.4-0.5 which would mean you should be able to fill a gallon jug in about 2 mins. The flow depends on the system you have. If you have any concerns or questions, please kindly contact us at [e-mail], at [phone] M-F 8:30-5:30 EST or at [phone] M-F 8:30-5:30 EST (Messaging only) We are happy to help!

[@jean-pierreguiraud9309]

Hi, I bought to a friend a Ispring RO system RCC7 AK, but I do not get pressure over 2 bars means I need to add a booster, is it possible and if yes could you help me to buy what I need? Thanks Regards Jean Pierre

[@iSpringWaterSystems]

Hi dear customer! Your inlet water pressure should be at least 45 psi for the RCC7AK to work properly. If your inlet water pressure is below 45 psi, a booster pump should be added. However, the systems with booster pumps require 30 psi as a minimum inlet water pressure. If your inlet water pressure is below, then what you need is a delivery/demand pump. Please, kindly contact us at [e-mail] or at [phone] M-F 8:30-5:30 EST to properly guide you as soon as possible.

[@U2GuitarTutorials]

Company didn’t make stem lock enough so after I connected the faucet and inserted the quick connect I couldn’t get the blue lock on top because the wing nut plastic stems were in the way. They should have used a regular metal nut and not such a wide plastic piece.

[@iSpringWaterSystems]

Hi there. Thanks for your comment! Please, kindly contact us at [e-mail] or at [phone] M-F 8:30-5:30 EST// [phone] M-F 8:30-5:30 EST to properly guide you. We are happy to help!

[@oschindler488]

My system has stopped making RO water after 6 months of use. Changed all first pre-filters to no avail. What are the troubleshooting steps to determine what component has failed? The adapter’s output voltage is about 8.4V and water tank still has air pressure. The tank is empty and no RO water is being produced. Appreciate any help. Thanks.

[@iSpringWaterSystems]

Hi dear customer! Could you please check the air tank pressure? The air tank pressure should be 7-10 psi in an empty tank. This video shows how to pressurize your tank: kzbin.info/www/bejne/l2exlGytp9Okd68 Please, kindly contact us at [e-mail] or at [phone] M-F 8:30-5:30 EST to properly help you as soon as possible. Thanks!

[@maxw6130]

Just installed the system but then read the waranty and it reads @ item 9 "Feed water must be completely free from Iron, Manganese or hydrogen sulfide." The first 2 items are allowed in Canada and is listed on our city water certificates as being present in our water.The 3rd item is not listed anywhere. Clarification would be greatly appreciated.

[@maxw6130]

My drain is 1 1/2" Where can I get a saddle to suit.

[@iSpringWaterSystems]

Hi Max. You can get it from a local hardware store.

[@carialv]

How do we know when tank is full

[@iSpringWaterSystems]

Hi Carina. The system will stop filling up the tank when it's full.

[@manishkulkarni1388]

Required distributorship in india 🇮🇳

[@iSpringWaterSystems]

Hi Manish. Please send your email to [e-mail]. Thanks.

[@soniavivachile]

And in Spain!