IT FINALLY RUNS!

[@thomaswilsonsr.9206]

Orange and blue. What an amazing color for that vehicle.. All American craftsmanship, with durability and effort to make such a wonderful masterpiece.

[@user-if8nz2yo5n]

I'm a little late. What a ride! I was a Dart collector/driver years ago. I had a 70 swinger & sedan, 73 swinger, and my 71 swinger (salavage yard special) daily driver I paid $300 for lasted me 10 new england winters seasons before I sold it back to the same yard I bought it from.

[@PeterAndersons]

Great work again mate and well done on a great set of videos! Just gotta get my Plymouth finished now...

[@tryadl.l.c.5039]

Excellent body lines. Small. Big Mopar motor. Great work - makin' it happen. All Chrysler. Thanks.

[@steve19745]

love these dart swingers

[@SNPSLF]

This guy deserves way more subscribers than he has, Mr. McCool, you are an amazing youtuber, I will try to share your channel to everyone I know. PROS: Amazing quality on your videos, you're ACTUALLY REAL, your intro is amazing, plus lots more! CONS: None!! There are many more good things to list, but I'm too tired to list them, lol, it's 10:30 PM here in Alabama and I've had a pretty long day, keep up the good work!

[@DylanMcCoolVideo]

This comment made my day.

[@david929190]

I just subbed, and then checked kijiji for dodge dart swingers.

[@calvinh.8882]

Advanced Gaming123, I don't know why, but i just found this channel after many years of watching car channels on KZbin, and i'm with you on everything you said! This is an amazing and real channel compared to most that i'v seen.. And i'm so glad i came across it.. @Dylan McCool, Keep up the great work, you and your channel are awesome!! Peace!!

[@dangeroustoys5668]

noice- seems odd itd just drop one lifter , probably someone sleeping at the machine where they were manufactured. good to hear its working great, it sounds wicked cool too! have a great new years!

[@franklong8573]

Must be nice to sort in short sleeves , here in Indiana it's 5 degrees tonight .......Good luck with this time around !!!

[@DylanMcCoolVideo]

The heater in the shop puts in work!

[@tommeier6645]

One thing I'd do is with a high lift cam is get a set of headers.the manifolds are to restrictive.

[@MoParRus340]

Nice job. The kick down? Pull the "slider" off, push the throttle all the way back (open), hold that then push the kick down "slider" back to full kick down position then screw the threaded "slider" part till it just clears the stud on the throttle. That is a good starting point. This will allow full throttle while forcing the kick down to maximum rpm before shifting. Might have to turn a thread or two to shift a couple hundred rpm sooner.

[@forty6andtwofan]

That is one really nice car. Set up just perfect. Glad this cam swap worked out. Enjoy that rad ride!!

[@trillrifaxegrindor4411]

looks like you have an awesome dad,enjoy it and respect him.we all weren't so lucky

[@slowpar88]

CompCam was very easy to work with and gracious to me also when the pin on my 274cam snapped during install into my challenger. Just installed a summit 6901 cam in a 360 I dropped in my 1978 crew cab w150. Love your vids bro, new favorite channel!

[@williespoonemore3392]

Oh that's nice ! Your little baby and all yours .. Sweet n sounds fantastic !

[@mikedill7378]

Wow.....you just made my day.....use to have 1972 swinger special ....with 340 in it from the factory....727 trany....323 possi rear end.....even the same color....but...black on the bottom....and dual hood scoops....if this happens again....check your values....mite be bent....only the 360 s had holleys......part of the troubles....go back to thermo quad 850....I ended up four speed standard....build a 1968 ....318....20 oversized pistons.....475 lift cam..... Tripple spring heads....I changed value angles to 30 and 15.... And 340 steel crankshaft.....turn 9,000..... Sure do miss my car......14 years....nothing passed it in Thunder Bay....

[@dennislynn2955]

You need a air filter on that, it's not good to run without it. Really great car. My cousin had a satellite back in the day. I really loved that car.

[@jamiejones5776]

Congrats Dylan. Job well done,

[@DylanMcCoolVideo]

Thanks Jamie!

[@s10-Mike]

Hey Dylan I love the videos. Especially excited about the challenger. Can u show how to properly adjust the kickdown? I would like to see that. I have a few issues with that myself

[@Canadian_Icecube]

Dylan, you are doing great. You inspired me to go back in my garage and wrench. So thank you, all the way from Canada

[@danielgrady9264]

9:00 Roadkill plug😂😂 This is seriously one of the best looking cars I've ever seen. I'm more of a truck guy, and a ford truck guy at that, but I can appreciate a suh-WEET car when I see one. I've got a 66 f-250 with a 352 FE, sounds amazingly similar to yours with the new cam.

[@dannycasler4959]

Did the Charger make it to Power Tour? I just found your site and stayed up all night binge watching your progress on the Charger so you could go on power tour and you had the car running but never said if you went!

[@jameswornica8545]

what about your rocker arms I had some on a 440 that were elongated were they ride at on the shaft, would allow the lifter to bounce on the cam knocking the lobe off

[@TheDustyaman]

Congratulations man. Glad to see the old girl back on the road

[@eclipseplayzph4152]

My neighbor had a Dodge dart like yours My neighbor said its been sittin there for 27 years the owner of the dart passed away and there sons could not take care of the car and they just left it in the sidings to Rust then my dad bought the car because my dad is a vintage fan he restored a 69 camaro And VW Beetle were still working on the dodge dart its kinda hard to restore during this pandemic the parts we ordered are all delayed btw i love your dodge dart i hope we restor ours love your videos Dylan Mc cool Stay cool :)

[@alexandermckay8594]

Sounds sweet! Time for some miles. And fix the speedo!

[@DylanMcCoolVideo]

I have the cable for it somewhere, but I think I lost it. I learned to use the RPMs for speed!

[@allenmax8995]

UTG just had the same frikkin thing happen on his 318 nitrous Coronet on cam break in...strange

[@OldSchoolHacker]

You do a great job shooting and editing your videos. I wish you all the luck in the world and I'm just a tad jealous that you and your dad get to spend so much time together in the shop building cars. I wish I had videos of the times that me and my dad were fixing cars. The language might have been a little sharp for YT but those time were special.

[@moparcasey3135]

Persistence pays! Ever thought of installing a manual valve body? I love them!!

[@DylanMcCoolVideo]

It does! And yes I have but probably not with this transmission.

[@sixpacksandsrts9122]

another good thing is to break in the cam with the old weaker valve springs. then swap them after the break in

[@reidbarnes9851]

I really like this Dart. Sounds great. I hope this one works for you.

[@paulcondie9932]

That dart is sweet!

[@jameswornica8545]

have you checked retainer to vavle guide clearance I had a problem like yours an I had more lift than clearance

[@johnrichjr.415]

Sounds amazing ! I've always loved that body style , great job 👍

[@DylanMcCoolVideo]

Appreciate it!

[@brandonjordan8906]

Had a 73 Scamp loved that car like it in blue mine was red!

[@calvinh.8882]

I know this video is a few months old, but i just found your channel today, and i'm so glad i did.. And i was just going to comment on the cam issue.. I know many people who have built cars for years, and it seems like at least the last 5 to 6 years, i'v seen way to many of them having issues with comp cams doing this same thing.. And now a few of the old schooler's, will not use regular lifters, rockers, or cams anymore because of it.. It costs them a bit more, but they just say it;s worth it to keep from having to tare it back down 2 or 3 times.. lol.. And what i call old schoolers, is the ones who like keeping the classic engines classic.. They will change the carb', put in a hotter cam, work the heads, and slap some headers on them, but they like keeping the basics, if that makes any sense.. Okay, i'm just rambling.. I hope you have a great week, and keep up the great work.. Peace!!

[@johnmilner7603]

Today's cams steel is not as good as in the 60's-70's plus I also believe the hardening process is not done as well today. Since that being the case and loosing 2 solid lifter cams in my 70 Z28, I've gone to a roller cam. I've had solid lifter cams since 1974 when I owned my 68 Z/28 that had the screaming 302.

[@qmopar]

nice job Dylan. Great color combo too. Sounds awesome.

[@luketeverino6085]

Always great to see your videos especially likin this series thanks man!

[@DylanMcCoolVideo]

Thank you for watching!

[@mynameis9057]

I bought a 70 dart GT with a slant 6 in it,had a 440 from a town & country wagon i was going to swap into it until some scumbag stole it. always loved that body style. ☆☆☆

[@charleywade3185]

Love everything but the color. Excellent job.

[@davidevans8826]

That sounds so good now that it’s fixed what a difference good job bud

[@justa4banger149]

Ive used a gas soaked rag clean rtv off rear end covers and oil pans for years. Of corse after i put it on my intake runners and i was out in the hood (detroit) at the races and my car started to over heat and idle bad and almost had me stuck out there for the night. Never agin. Lol guess people have to find out from there own fails. Lol

[@Impactjunky]

Sounds great, seems to run pretty good too.

[@richardbaker5266]

Car looks and sounds great. Nice work

[@danbolton3180]

My dad got one of these Darts for my sister in the late '70's that was rough, but he told her he would fix it nice for her. She flatly refused the car, so he drove it for the winter getting it mechanically sound, then sold it on. She went into debt to get an AMC Javelin, then her boyfriend wrecked it...

[@ArmouryMan]

It makes me happy you are watching roadkill in the backround

[@larrymagee8758]

Nice music, top 40 classic rock

[@Chevroldsmobuiac]

Sweet car, I would love to have a Dart or Valiant from that era. Nice job!

[@somedude613]

Loving the sound of that Dart man! Cant wait for you to build the Duster!

[@DylanMcCoolVideo]

Thanks, you and me both!

[@evilwarcow]

What year?

[@Pontiac455]

Zinc additive in your oil ?

[@TylersNeighborhoodGarage]

Hey I didn't know you were not that far away. Cool! Here all this time I thought nobody around here had Mopars or was on YT.

[@DylanMcCoolVideo]

Tyler's Neighborhood Garage Yeah I noticed your Alabama tags. You aren’t far from me.

[@ja-nu7ye]

Tyler's awesome yt videos much mopar respect

[@ivonniking]

Not a big dart fan but this is sweet nice build Dylan

[@bjc1390]

Looks and sounds great can't wait to get my next project car or truck, you keep up the great work!

[@mopar92]

Man that new cam and lifters spent a lot of time at low RPMs. That’s will wipe one in a second. Fire instantly and go to 2000. No idle no low rpm.

[@jeremyshafto6615]

I love the quality to your videos! Top notch and it's real

[@DylanMcCoolVideo]

Lost Boys Racing Thank you!

[@orgazmic13]

I run a 530 lift in my 360. Without the breather on it. Mine will never shift right. All vacuum lines have to be hooked up. Mine has the original Hurst 4-speed transmission.

[@popsboatsnhotrods]

Good parenting Pay's off ! Thanks for making great videos.

[@Jacobkiziah]

Love that car

[@DylanMcCoolVideo]

Thanks!

[@rong4189]

I suggested the safest thing to do would be to pull the engine to clean it but, good job. What exactly did you do/use to flush the engine? Glad it worked, you saved yourself a ton of work (as you already know. lol)

[@razoreyes45k]

Yes, I'd also like to know how Dylan flushed out his engine.

[@tymac3306]

I don't know why but I love love love Dodge Darts

[@wendyw1121]

You’re killing the cam lobes with all that cranking...... the engine should be timed correctly and start immediately. Fill the floats on the carb and squirt plenty of gas into the engine and use a test light to check your timing before you fire it. I do like your videos, I look forward to every new one

[@EBM_Worldwide]

that was awesome, how did u get all the rust off

[@marcusmaddenov2451]

Have to admit that Dart is my favorite car of yours and not because I once has a 67 the same color....

[@shakerattleandrollgarage7223]

Sounds much nicer! 👍..Time to goose it 😁

[@pingucarlsson1822]

Happy new year from Pelle in Stockholm Sweden.

[@justinriley8651]

try less preload at break in . I do sbc alot and I only give em a 1/4 turn and let em break in then I give em another 1/4 turn.also pre oil and it shouldn't wipe it out.

[@seniorjuanvaldez]

Do you have a video showing how to adjust the kickdown linkage?

[@tootall5559]

If it were mine, I'd quiet it down with mufflers but install cutouts, then add the center caps to the wheels so it looked like mom's grocery getter back in the day.

[@brianwinters4991]

It's funny I look at these cars today and love me , I remember back in the day when I started wrenching , I though these Mopars were turds , I'd love to have one today , keep up the good work !

[@leegoldeneagle9003]

Very nice 👍 love it looks very nice as well thanks 👍

[@the_lancaster_libertarian]

Thats a beautiful car and an awesome shade of blue

[@sherryandduane45616]

Hey Dylan thinking bout running comp 268/280-477/480 in my 85 dodge d100 are you using a stall with it if so how does it do with stock converter

[@kc-6837]

Great job!

[@VintageMoparnut]

Nice car! 😎🤘. Im a mopar nut my self. My project car is a 1965 dodge dart 2 door post car. A modified 360 racing 727 8-3/4 rear .Are you running flomaster? Just trying to help and not beeing a smart ass but with an aggressive cam it sounds like golf balls bouncing around in a steel box . I going to be running borla pro knock offs or hooker aero chamber muffler for a more throaty / rumble . Maybe its a combo of my smart phone audio and youtube audio ?? No disrespect ✌

[@janhurter5214]

This specific car was called a Valiant in South Africa.

[@OKICUR12]

plugged oil port ?

[@gardeningathomewithpattyan6181]

she sounds and looks good man

[@franksilva7531]

E bom saber que você gosta de de carros antigos Parabéns amigo. Frank. São Paulo Brasil.

[@charlescummings1484]

Wonderful.

[@JRC99]

I hear the NASCARLO episode of Roadkill on in the background....

[@justacaraddict2916]

Does anyone happen to know that color code? Absolutely love it.

[@DylanMcCoolVideo]

Cole Lamberts It’s B5 blue.

[@justacaraddict2916]

Wow, thanks. I always thought B5 was a couple shades lighter.

[@josephhoover7175]

Do they not make roller lifters for it? So much easier to brake in and last so much longer.

[@gRosh08]

Sweet Dart!

[@krust1er]

So what size wheels do you have on these? I like your dart.

[@gosportjamie]

I'm glad to see it's all back together and running well. It certainly sounds a lot happier now that it has a milder cam in it, and I bet it goes better too...

[@DylanMcCoolVideo]

It runs much better!

[@davidh1249]

That's a common mistake,people love to put a cam with waaay to much lift and duration and seem surprised when problems ensue.

[@duanewhite3184]

Put headers on it to let it breathe plus it will sound better

[@YGKnox]

Now thats one beautiful automobile right there !

[@nathanjorg421]

Love the background music

[@crashoveride4262]

Sounds great. Would really scream with some longtubes

[@kevinduffley1571]

Mr mcool that blue dart is bad ass 👍👍

[@mollybags455]

I would love one of these

[@bultacowally]

pretty sure Comp Cams are Chinese now. Might account for most of your problems and why Summit was so gracious to just give you a new one. They probably buy them CHEAP. I have a '70 'cuda with a 340 and use MOPAR Performance parts only now. On a side note I remember back in the late 70's early 80's Chevy had a huge problem with cam lobes wearing down very quickly on the back 2 cylinders on the small blocks. My father in law worked at a big Chevy dealer as a tech guy and told me they were just bad cams but always being the same lobes leaves me to believe it was an oiling problem. Looks badass with the cop car wheels...the ONLY wheels that look good black. U should try to find a sport hood to put on that with the dual scoops.

[@haydave420]

dude that thing is nice, I love it a lot, and I like the color.

[@ragnardanneskjold7675]

I can smell the hydro carbons from here. I love the smell of no catalytic converters.

[@landonsparks2161]

Classic Cars Are Awesome

[@starfirerider]

Man she sounds wicked!

[@mattjimenez4775]

Keep up the great work! love the vids

[@DylanMcCoolVideo]

Thank you!

[@cesareomendez6794]

The 284/484 sounded much better! what rear gears you got?

[@billpar]

really a good-looking car great color

[@gonzo5912]

man you should have pulled the motor and remove all the oil passage plugs and hot tanked it to ensure all fine shavings are removed from the engine block. might run good for now, but expect some more issues.