It’s a work on the Jeep episode

  Рет қаралды 2,179

Jerry Aintloud

Jerry Aintloud

Күн бұрын

Пікірлер: 26
@JasonWW2000
@JasonWW2000 2 ай бұрын
I little trick I do when I cut tubing is to use a flaring kit and put just a tiny little flare on the tube ends. Then clamp just in front of the flare. It can help sealing and there's no way the hose can slide off. I also saw some cool 12v AC compressors pretty cheap. They tend to pull 60-80 amps, but that would not be any big deal for you. A whole kit with lines, compressor, evaporator and condenser was like $500. If your indash evaporator is still working then it would be even cheaper. Mount the condenser up front or even under the vehicle. Compressor for sure would mount underneath. Something to think about over the winter.
@bryanmeier272xp8
@bryanmeier272xp8 2 ай бұрын
put a tac weld on that door jam part so you dont have to worry about it falling in ya probly not enough welder for 7018 or the metal aint clean enuff or ground a good i always take a drill with wire brush on it clean were your grounding and clean ware your welding and clean the weld if your going to weld to weld to im not a professional but i bought a Lincoln 140 mig welder for $125 of market place and it was like new and i got maybe like 2 hours of welding in now and thats all the stuff iv learned so fare lol id keep some those big ass hose clamps in you jeep i dont trust the ones your useing once you tighten those screw hos clamp you can cut the extra off with some tin snips
@deaconsmith5988
@deaconsmith5988 2 ай бұрын
So how you handle the broken windshield bit is you go to each class let them put the meter in run the run and record the score. Proof of everything. This is how they do it at Midwest SPL.
@bryanmeier272xp8
@bryanmeier272xp8 2 ай бұрын
not hating on the welds i only have couple hours in welding the key is clean everything drill wire brush and small spots i use a dremel with little wire brush and dont stay in one spot to long when welding keep it moving if you dont keep it moving you will burn threw
@ChaosTherapy719
@ChaosTherapy719 2 ай бұрын
Tbh Bass Wars owes me 2 3rd place trophies from Supa FEST 24 Junction city Kansas. I clenched 3rd in 2 classes but had to leave after the 1st day because of car issues. And it was announced officially that I had placed in Assassin class and Cyclone trunk. But no contact from the organization to arrange to mail them to me. Not a big deal to some, but to me. That was my very first time in the lanes and I was screwed out of my trophies
@christophermcbride3284
@christophermcbride3284 2 ай бұрын
hey bro I give her major props hell yeah 💯
@DCBDesigns
@DCBDesigns 2 ай бұрын
Just keep doing the best you can. Fuck the haters.
@ianrace4066
@ianrace4066 2 ай бұрын
As long as the welds hold who cives a shit.😅
@S.E.T.Basshead
@S.E.T.Basshead 2 ай бұрын
@ 20:18, dude I feel you. Like Jonathan and everyone at JS have been the easiest to work with. Maxxsonicss and NVX are not bad either to work with. But as you said, the constant grind of fixing, repairing, testing, travel, show, and repeat. Sponsorships sound nice but most companies have a contract you have to sign and abide by folks. It aint just sunshine n rainbows yall.
@paulnickels6254
@paulnickels6254 2 ай бұрын
Dude, yours and Debs welds look a hell a lot better than that hing that looked like chewing gum welds. Your welds are looking better every time you do it practice makes perfect. I always say it's not all about how the welds look, it's about how well it holds.
@jacksonhemrich5883
@jacksonhemrich5883 2 ай бұрын
Just some advice for you. If you use your little stick welder get you some 6013 welding rods. They were designed to weld sheet metal. It looks like 6013 1/16 dia rods run about 40 amps. Or drive all the way to illinois and I'll weld it for you.
@djkeys415s
@djkeys415s 2 ай бұрын
And that wy i like this comunity !!!!
@JerryAintloud
@JerryAintloud 2 ай бұрын
The welder came with 6013 2.5 rods and they were great
@TomJordan-e5s
@TomJordan-e5s 2 ай бұрын
6013 is the rod u want it’s a all around rod lot of people call it farmer rod is easier to weld with than 7018
@kc0otv1
@kc0otv1 2 ай бұрын
We Need to have something that people that is fair no matter to complete in db . There shouldn't be drama In something we are supposed to enjoy and love .
@howardsmith876
@howardsmith876 2 ай бұрын
Yeah you don’t have enough welder for that Rod 🤣🤣
@devencherry8976
@devencherry8976 2 ай бұрын
just ordered a buncha stuff from d4s using your link, gotta nice discount since it was jp's birthday..
@JerryAintloud
@JerryAintloud 2 ай бұрын
Thank you
@BobBasshead
@BobBasshead 2 ай бұрын
Is that Owens on Seaboard Street you're talking about? You drove right past my street on 701, that is a mess cause they're widening it FINALLY! The price of scrap steel is currently $0.03-$0.05 per pound, but buying any steel from Lowe's or Home Depot is outrageously expensive! Those crimp-on hose clamps are much better than the cheep worm style clamps.
@JerryAintloud
@JerryAintloud 2 ай бұрын
Conway steel off of 701
@jeremystover256
@jeremystover256 2 ай бұрын
Awesome job! Shades link please 🤔
@JerryAintloud
@JerryAintloud 2 ай бұрын
boostedshades.com/?srsltid=AfmBOorf9iZYgH6jIUnN3ygRKIMnkE-LTHP0CBg67OJqrLlL-SOjwpZ4
@cristovalmontoya5222
@cristovalmontoya5222 2 ай бұрын
That little welder pretty sweet that’s something I wouldn’t mind playing around with I’d probably by a lil wire feed ?
@djkeys415s
@djkeys415s 2 ай бұрын
I bet thats the same Billy that put me in sniper class at slam they never put my nubers up at no show i ever compeated at.so that guy is an ass but last he said i was in monster class with 4 15s.its sad that the sport is so dramatique filled but meca is cool tho my first run was a 48.5 and a 51.1 at slam. This yr with bas wars
@cristovalmontoya5222
@cristovalmontoya5222 2 ай бұрын
Do both windows down demos than that one door won’t take all the beaten is it not windy with both windows down ?
Hyanka 15 in the Rogue
29:45
Jerry Aintloud
Рет қаралды 1,6 М.
Myrtle Beach Jeep Jam 2024 Destroy all Doors
28:07
Jerry Aintloud
Рет қаралды 2,9 М.
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Door work and a new door for Jangalang
19:26
Jerry Aintloud
Рет қаралды 1,9 М.
THE TOAD EPISODE 11 WALK AROUND -  JEEP CHEROKEE XJ PROJECT UPDATE
33:35
Doing a spray in truck bed liner.
32:55
Rienks Works
Рет қаралды 2,5 М.
What does it cost to restore a car?
26:34
Paintucation By Kevin Tetz
Рет қаралды 12 М.
A Bike show and Scion build part 4 we already break stuff
54:00
Jerry Aintloud
Рет қаралды 4,4 М.
Making Old Trucks Great Again
20:43
Toyota World Runners
Рет қаралды 144 М.
Fixing Death Note and Jangalang gets a new bumper
37:21
Jerry Aintloud
Рет қаралды 1,9 М.
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН