It's Broken! Barn Rifle Stock Repair!

[@jerrythomas463]

Pack the crack with sawdust then do the super glue. Hit it with accelerator and you’re golden.

[@biohydrixtrix]

Nice repair, I need to do this with a rifle I inherited from my grandfather. Thanks again for this.

[@robertrandin9568]

Good job but I found out that the best is wood sawdust from the wood mix with clear fast cure epoxy and when you sand it and put oil or true oil it will blend right in.

[@spooneythebadger]

Nice job bringing an old gun back to life! I've had some luck using a clear cyanoacrylate and mixing it with the sanding dust from the wood. It still won't be a perfect match to the original but it's pretty close. The sanding dust doesn't seem to interfere with the accelerant.

[@cerij4242]

When using cyanoacrylate on wood it works if you dampen the wood with water, it sticks like glue then🤣🤣🤣

[@jimdillon4278]

Nice project. I like the cocoa idea. A better color match might be coffee ground super fine for espresso - - I have used that with super glue on both walnut and sassafras and gotten pretty much invisible results. If you don't have espresso around, maybe a coffee shop would sell you a couple tablespoons to try out.

[@stevefox7912]

What kind of glue are you using? It sounds like you’re saying akerglass resin

[@alexatowing]

Do you know how to make mossberg 590 magazine tube to frame threads

[@precisionmachineshed]

I would need to look at what you are referring to. Off the top of my head, I should be able to make just about any thread on a lathe.