IT’S STRONG Armour Detail Supply Pro Quartz Coating

[@ShineYourLightDetailing]

Watched every moment. Smart going after the minerals. Great choice using Peleus panel prep. You’re right, camera doesn’t (ever) do it justice. I can tell you did a fantastic job on that paint. 🙌🏼🙌🏼🙌🏼

[@DetailingMadeSimple]

Thank you Tim. Glad you enjoyed the video and results. Yes the minerals are important to remove 💪. Peleus is fire 🔥. Right!!!! The camera messes up the shine especially at night.

[@johnathancooper4663]

That came out great! I love the mixture of products. Great results ADS Coatings have been making headlines

[@DetailingMadeSimple]

Thank you my brother. I’m glad you enjoyed the content. Yes just love using a variety of quality products . Makes detailing enjoyable 💪💪💪

[@armourdetailsupply]

Looks killer, Soc! You did an amazing job with that paint!💪

[@DetailingMadeSimple]

Thank you 🫡🫡🫡. Glad you enjoyed the results and content. That gloss was fire 🔥 with ADS Pro

[@chrisbradley3224]

@armourdetailsupply My wheels are an extreme case with 6 piston brakes and track pads. I can clean them fully and they’re nasty again in a week of commuting. Do you think your quartz pro or pro stack would work better than the wheel coating?

[@DetailingMadeSimple]

@@chrisbradley3224 to be quite honest I cannot tell you as I haven’t used their wheel coating yet or apply their pro Quartz on wheels. Best person to ask is @armourdetailsupply I don’t want to give you any wrong information. I can ask them as well for my knowledge.

[@armourdetailsupply]

No.. no product on earth is going to make them not get nasty in a week. Just clean them weekly. Or even every few days with a touchless method of just spraying a wheel cleaner, letting it dwell, and pressure washing it off.@@chrisbradley3224

[@tomchinigo5014]

Great results Soc !! The extra step made a big difference and it's not all about the money. I believe in going the extra mile if you can make a huge difference in a short amount of time. Thanks for the video.

[@DetailingMadeSimple]

Appreciate it Tom. Exactly that extra bit didn’t cause much time really. We were actually about 45 min ahead of schedule. Sometimes it wasn’t a huge detriment and like you said in a very short amount of time. 💪💪

[@klasseact6663]

I just used the regular ADS Quartz on my 2022 Elantra N and it came out great! The paint had 2 year old Gyeon Q2 Pure EVO on it and it was topped with many things over 2 years, plus maintained with quality soaps, both pH nuetral and Bilt-Hamber Touchless and Auto-foam. I had extra applicators at the ready but only used the 1 that came with the kit, used both sides and they never got crusty during application (followed the directions for initial prep) I used 2 towels to wipe it off and that worked great, this stuff comes off easy👍👍

[@DetailingMadeSimple]

That's awesome 💪💪. Definitely someone who maintains their vehicle reeks the benefits of a full coating. Yes the regular ads coating you don't get that crazy crunchy feel only on the pro version. Man that gets crunchy after 2 panels. It's crazy!!! The ADS coating is such an easy coating to use with phenomenal results

[@klasseact6663]

@DetailingMadeSimple I almost wish I gotten Pro but the way I maintain my cars paint, the 3 yr Quartz will last at least that long👍

[@DetailingMadeSimple]

Definitely it will last you awhile since you take very good care of your vehicles

[@T-BoneTodd]

Awsome job! Car looks amazing! ADS coming in strong!💪🏼

[@DetailingMadeSimple]

Thank you Todd. Yessir ADS has Gems in their product line 🫡

[@jaimedpcaus1]

Super nice Soc. Great job! You are awesome at this. What did you apply in the ratio of 1:3 again?

[@DetailingMadeSimple]

Thank you my brother 💪. I applied Energo from Labocosmetica their mineral and lime scale remover for water spots.

[@jaimedpcaus1]

@@DetailingMadeSimple Oh good. The work came out super nice and I know for sure that your customer loved it. Hehe

[@MNpicker]

I've said it before and will say it again.. this is good stuff Soc!! People NEED to see this!!!😎

[@DetailingMadeSimple]

Appreciate you my brother always tuning in! Thank you very enjoying my detailing work 💪💪💪

[@IComparetto]

Gorgeous job Soc, got that paint looking like glass without chasing for perfection. You always have videos I wanna watch, keep it up 👍

[@DetailingMadeSimple]

Appreciate it my brother! Thank you for always tuning in 💪 and enjoying the content. Exactly the perfect pad and polish combo for 90% of the vehicle with a one step.

[@jasoncraig7096]

Nice work on the BMW!!! I have been really impressed with ADS Pro!!! Very stout coating from what I can see so far!!!

[@DetailingMadeSimple]

Thank you bro! I appreciate it. Yes ADS Pro is on another level. It's very strong 💪

[@wescat2]

That black is so nice. I remember how glossy after applying to ours. Great job.

[@DetailingMadeSimple]

Yeah it's nice and rich too!yeah black cars are amazing when kept clean 💪💪 just seeing the rich wet shine

[@ThisOldDetailingDude]

Phenomenal results! You are a 1st class detailer. I appreciate you pointing out the small details. Nice work

[@DetailingMadeSimple]

Thank you my brother. I appreciate your comment 💪 coming from another top tier detailer. Glad you enjoyed the content and results!!

[@ThisOldDetailingDude]

@@DetailingMadeSimple you are too kind. But I ❤️ your content! Always honest & on point

[@DetailingMadeSimple]

@@ThisOldDetailingDude 🫡🫡. Have to be honest to survive here 🤣.

[@millerdetailing4176]

Great work bro definitely came out looking awesome. Appreciate all the content and breakdown of the process.

[@DetailingMadeSimple]

Appreciate you Miller always.! Thank you for tuning in and enjoying the content on the channel and my detailing processes 💪🫡🫡

[@untappeddetails3257]

Looks good bro! Sometimes the little extra stuff like what you did just makes it come together and it does feel good when you see the customers reaction as well!

[@DetailingMadeSimple]

Thank you my brother 💪🫡. Yes that little extra bit that takes practically no more than an extra 20-30 min sets you apart in customer service. It was needed in this case but the customer was very greatful!!

[@wesoakes]

Highly suggest doing the damp rinseless towel wipeoff with gold standard. Saves a ton of work dry wiping polish.

[@DetailingMadeSimple]

Oh yes. That’s what I do always. Not sure if you noticed in the video but the yellow towel on the windshield is my dampen towel and the orange is my buff off after the initial wipe. 💪💪.

[@orthodox1717]

Looks bangin'! Yvan has really made me think, while a 15mm DA is ok, I think I'm gonna start using a 21mm. Much better/faster cutting ability and can still finish just fine on hard paint. AMMO Nyc alway uses a 21mm, even on soft paint, which I find intersting.

[@DetailingMadeSimple]

Yes the 21mm cuts fantastic. I’ll be purchasing their DA when it comes out for sure. I don’t have a 21mm machine

[@cgloss7608]

Always coming in with that fire 🔥

[@DetailingMadeSimple]

Appreciate you my brother 👊

[@BXGreen_DrivewayDetails]

Very nice Soc!

[@DetailingMadeSimple]

Thank you 🙏. Car came out super glossy!!!

[@BXGreen_DrivewayDetails]

@@DetailingMadeSimplecrazy glossy! That depth!

[@gladyuscornell9755]

ADS making headlines everywhere I have to get adapt!!!!!!

[@DetailingMadeSimple]

ADS coming in crazy good 👊. I haven’t used adapt yet I’ll try to get my hands on it

[@seventysschev]

Awesome work! That paint looks fantastic-I’m gonna take a look at that water spot remover. What kind of weather/humidity did you have for this application? I’m coating with this in a couple weeks. I talked with the guys at Nasiol US and they said we’ll be able to buy those GlassShield towels in bulk. We can also use towels/applicators that don’t have a lot of texture/pile to them

[@DetailingMadeSimple]

Thank you. Yeah I used the diy waterspot remover for the minerals. But to diminish some of the scaling I tried Energo from Labocosmetica 3:1 which is not recommended by them the highest they say is 5:1 dilution which wasn’t doing anything so when I went 3:1 it helped and some of the scaling was removed. As for the weather it was about 50 degrees that day humidity maybe 20% was a pretty dry day that day. Great to know with Nasiol cause that towel is not it bro we need more also awesome we can use non pile cotton towels as well I just need to find them.

[@seventysschev]

@@DetailingMadeSimple totally agree. That towel had a bunch of pilling and shedded on me

[@loveracing1988]

How do you manage to do a big surface like a hood or a truck bed with ceramic? Do you do section and remove it then move to a different section? How do you manage to not overlap the coverage? Or am I just kverthinking it?

[@DetailingMadeSimple]

Just apply it as such section by section if you slightly over lap nothing happens. Doesn’t hurt or make it more durable. You’re just overthinking. Think of it like coloring. You don’t do it by sections and never overlap. You just fill in and ensure it’s even coverage and even finish. Same for this. Apply in sections if you slightly overlap it’s all good no harm no foul. 💪💪 I overlap a couple inches always. From the previous section it’s not perfection we are going after it’s even coverage

[@DetailsNMe]

Do you coat the trim and front/rear plastics ? The bumper ?

[@DetailingMadeSimple]

No I personally don’t coat the plastic trim I prefer to use a trim restorer like solution finish or dress it depending what the customer chooses. I need to talk to lithium in terms of their ceramic cubes because I want to make sure it doesn’t permanently seal the pores and overtime it can accept another trim cube years later. As for the front grill when I comes for a follow up wash I’ll spray a spray of rinse off protection like quick beads and give protection that way 👍

[@MD-ph9bk]

What temperature was this applied in? Thanks!

[@DetailingMadeSimple]

50 degrees Fahrenheit. 👍

[@MD-ph9bk]

@@DetailingMadeSimple awesome job! I’m thinking of using this on my truck instead of Carpro CQUK 3.0

[@MD-ph9bk]

Soc is this a sweating/beading when ready to level or is it a rainbow look?

[@DetailingMadeSimple]

@@MD-ph9bk this is wayyyyy better in terms of Carpro UK3.0. 3.0 is a staple but it’s not slick like this ADS Pro coating and 3.0 is rated as a 2 year coating. 3 years if layered. I have a video premiering today on this coating vs another at 7:30pm ADS Pro is strong. 💪. 1 layer rated for up to 5 years

[@MD-ph9bk]

@@DetailingMadeSimple I am a huge fan of CQUK 3.0. It’s a very durable coating if maintained properly (which I do). But I’m wanting something even more durable

[@Ecdetails]

Looks good Soc where does this rank for and nasiol lol that glass coating can get tricky if you dont use a non linting microfiber

[@DetailingMadeSimple]

Appreciate you bro!! As for this coating I’m giving it top 3 coating overall for sure if we are basing it off single layer stout coatings. Bro that nasiol thing I butchered that application. It’s there but just not properly in terms of trying to have the best user experience and how they recommend to apply it 🤣🥴

[@Ecdetails]

@@DetailingMadeSimple ya 20 sprays on the whole window and use the cloth they give you works great - normal microfiber won’t work you need to get non linting clothes

[@DetailingMadeSimple]

@@Ecdetails facts. I’m purchasing more and I heard nasiol will have those small towels to buy in bulk/packs

[@seabrew1]

Sol is more aggressive than DIY gold standard?

[@DetailingMadeSimple]

Yes for me it’s slightly more aggressive as it’s considered a medium cut polish that’s pad dependent. Where as GS is a hybrid can cut very good and finish a lot nicer covers more of a spectrum than Sole in my opinion and experience. But we are pulling hairs in terms of cutting it’s not a make or break. But if need a bit more oomf to remove topical stubborn etchings I’d go with sole if GS didn’t cut it

[@seabrew1]

@@DetailingMadeSimple both are medium cut polishes IMO. All compounds/polishes are pad dependent - silly nonsense. Hybrid is a buzzword.

[@DetailingMadeSimple]

@@seabrew1 of course all polishes are pad dependent. But I've never had results with a wool pad with sonax perfect finish to where it removed defects. Whether hybrid is a word or not it doesn't deter that some compounds and polishes cut or finishes down better than others if we are talking about trying to one step a paint.

[@orthodox1717]

While GS polish is excellent, it's not the end all, be all like it's marketed to be. It doesn't cut as good as a true compound and does not finish as good as a true finishing polish. I'd put it in the same league as 3D One. To be honest, I use several other polishes/compounds over GS polish. There are times where GS can cut and finish perfect as a 1-step, but.... Also, if youre not washing your pad out after every pass, I wouldn't use GS polish. It's too concentrated and it will saturate the pad quickly. You can't blow it out as easily as other polishes. My opinion, of course.

[@DetailingMadeSimple]

@@orthodox1717 that’s true. For the gold standard it’s not the heavy cutting and not the most jeweling. But for a large spectrum it can get 80-90% of paints look amazing and glossy. That’s why I like GS. Now in terms of 3D vs GS I prefer GS. Easier wipe off for me and better finishing. Plus it’s just one spray on the pad very easy and simple 👍

[@miguelsanchez2335]

That's an amazing turn around especially after removing the water spots. On the flat areas 🔥🔥🔥🔥🔥🔥

[@DetailingMadeSimple]

Appreciate you my brother yes the waterspots were the nuisance this detail 🤣🤣

[@ThisOldDetailingDude]

2nd to Humberto! ( as always)

[@DetailingMadeSimple]

🤣🤣. Humberto always ready!!!

[@IamDetailedAF]

3rd amigo in the 🏠

[@DetailingMadeSimple]

Let’s get it 💪💪

[@1stfrompuertorico568]

First!!!

[@DetailingMadeSimple]

As always Humberto 💪💪. Appreciate you