It's very simple! But not everyone knows how it works!

Рет қаралды 649,825

Күн бұрын

Пікірлер: 103

@menscraft7985 2 ай бұрын

Hello. I hope you will appreciate this idea as well as I do, in my opinion this is the best, working option. If you are against it, we can discuss it in the comments)

@diyhard666 2 ай бұрын

It's brilliant. This time your thumbnail isn't misleading. 👍👍👍 Do you provide building plans?

@RicardoLopez-jx6cx 2 ай бұрын

Es una idea muy interesante. Te interes de seguir tratando el tema. Cómo debo hacer ?

@albvanzet Ай бұрын

De kinderen eten pasta de pasta eten het eten het uu

@zdenekerlebach5437 Ай бұрын

@Rick-if5zb 2 ай бұрын

And again the fake thumbnail draws people in with false ideas. What you do is great, no need to lie about it with a fake thumbnail. People like me get fed up with fake thumbnails and refuse to like and subscribe.

@fvrrljr Ай бұрын

*EXACT-A-MUNDO!!!* 👍👍👍

@clarencegreen3071 Ай бұрын

Some of us older gentlemen (aka assholes) go so far as to block the channel for stuff like this.

@fvrrljr Ай бұрын

@@clarencegreen3071 *curmudgeon me 3*

@robertmann7277 Ай бұрын

I would've just gone to the store and bought a clamp

@keithtodd8631 Ай бұрын

I watch many of these that pop out of nowhere but this one is Very Good ! Congratulations !

@markchodroff250 Ай бұрын

Beautiful job , I have the same kind of clamps but there metal and pipes !

@RickyD1968 Күн бұрын

Very nice clamps !!! But a lot easier to just go buy some clamps !!!

@tjhummer7368 Ай бұрын

I was hoping this build wouldn't be something I could go to Lowe's and buy for $10, but alas.

@DDYTFJB-wy9fb 2 күн бұрын

No, you don’t understand. You need to go to Lowe’s, Home Depot and several other stores to purchase all this machinery. This dude is a machinery sales person!

@Tblanktim-mu1bh 2 ай бұрын

Whatever the fashion, more clamps are never a problem.

@menscraft7985 2 ай бұрын

You're right, buddy! Clamps will never be superfluous

@hotflashfoto Күн бұрын

Super!!!

@toddhann7751 Ай бұрын

Wow you re invented the bar clamp. Amazing

@Watson1 Ай бұрын

Fool. I guarantee you couldn’t make anything near as good as this.

@jefferyberridge1444 Ай бұрын

Well it looks simple if you own a machine shop😳

@karstenhaase6144 Ай бұрын

Finde ich gut diese Ideen,das sieh man auch an den anderen Teilen,wie den Schutz an der Kreissäge oder den Klemmstock an der Bohrmaschine,Grüße crazyrabbit ❤❤❤🐰😊

@peternicholsonu6090 2 ай бұрын

Just brilliant. My plastic clamps do do have a long life due to my low care. Am late 70’s so need to make clamps I will want to care better for for another 20yrs or so. That drill press vice blew me away. I’m well into finishing 2 camper trailers I’ve built from floor up and before I do another I plan to improve my tools...thankyou so much.

@Watson1 Ай бұрын

That is a fantastic idea for my students to make. Well done 👍🏻👍🏻

@SpiderDanification 2 ай бұрын

Could you please provide some plans? Great work, this is gorgeous!

@frankadams2401 2 ай бұрын

Give me a break; there is all ways Harbor Freight.

@keithtodd8631 Ай бұрын

Yes , True , But Building Your own , For Your own use has it's own many rewards !

@erroldavis2983 Ай бұрын

Without all of that labor and material, I can go to the store and buy one of those for $18

@memyself7413 Ай бұрын

Well, wasn’t that exciting! I’ll have nightmares tonight.

@JürgenJungmann 28 күн бұрын

Ich bin handwerklich nicht unbegabt, aber die tollen Anwendungsmöglichkeiten haben mich als gelernten Modelltischler und Kfz_Schrauber doch sehr beeindruckt.

@redherring9444 27 күн бұрын

yes , you can make lots of cool stuf , with a quarter million dollars worth of tools in a nice shop .

@gus892 9 күн бұрын

"It's Very simple" ????

@chrpchr1christodoulou476 Ай бұрын

This is similar to traveling from Rome to Paris via Tokyo and Manilla.

@carlthornton3076 Ай бұрын

Very Good!

@thestone3849 Күн бұрын

Whats its use for car? Tyres? Wheels? 😢 Fail to understand after watching full video whats to be done with it? What made you to make this??

@bsmith8564 2 күн бұрын

Yes, very simple

@think2023 2 ай бұрын

Nicely done...but google "proper use of a metal file" to make life a little easier!

@valekax2158 2 ай бұрын

If you want to get a good quality thing, do it yourself! I respect the master for his work.

@epsifarik 2 ай бұрын

Impressive. Triple wow!!

@baseline33 27 күн бұрын

If I get the slightest suspicion of ‘click bait’ I go straight to the comments and if they confirm my suspicions I click off so I’ve watched about 36 seconds of this.

@tinkert3100 Ай бұрын

"Not everyone knows how it works", but a LOT of people don't know what it is, or what it does.

@leroymellix5647 2 ай бұрын

Nice!

@gerryepp6262 Ай бұрын

RIIIGHT !,,,,cause you cant just go to any tool supply store and buy commercially made bar clamps CHEAPER and that take far less time , energy and work to acquire

@Watson1 Ай бұрын

Bad thumbnail, don’t do that. Turns people off. Just show the real picture.

@TheKayliedGamerChannel-YouTube Ай бұрын

Its hardly easy to make, unless you got those materials, equipment and spare time. Great craftwork nonetheless.

@erich4647 2 ай бұрын

It's nice, but I could buy a clamp just like it from Harbor freight for about 15 bucks

@AB-C1 2 ай бұрын

Not everyone is in the U.S. or have them that cheap. Clamps are bloody expensive in the U.K. and Europe

@menscraft7985 2 ай бұрын

No, my friend) for 15 bucks you can only buy a Chinese knockoff of inferior quality, which will not work for even one project

@rogerfay5195 2 ай бұрын

Yes Harbor Freight or just buy two ends that use iron pipe in between. Make them as long as you need. You can’t get this short length of square tube and all thread for less than $10, but wait! This video was probably made during Trump era, before Biden put his mark on it. Of course, this is the ONLY bar clamp that I know of that has a full length SCREW an integral yet avoidable component of it!😅

@wakeupamericaandresist2413 Ай бұрын

The fun part is making the clamp 👍😵‍💫

@honestchris7472 Ай бұрын

It is fine to do this because you can and perhaps you enjoy making these things but really, I would rather buy some clamps.

@AllenHorton-lb3ti 2 ай бұрын

How many repetitive times does it take to have the viewers understand the process?

@markfisher7962 3 күн бұрын

Sigh, what a lot of work to replace the cheapest type of long-reach clamp. That shop-made drill press vise looks cool, however.

@kampfkater8503 Ай бұрын

Also bei uns gibt es so etwas im Baumarkt! Das Ding heißt SCHRAUBZWINGE!

@michaelodonnell8591 28 күн бұрын

I play all of this type of videos at 2x speed.

@ElViejoven Ай бұрын

When you see the tools you can imagine: "weekend mechanic"... he has expensive tools that he used 4 hours in the last year... at most! Can it be made more resistant?: obviously!.... more complicated?: impossible!.

@larryholland1466 Ай бұрын

Nice

@gussingh3948 15 күн бұрын

Is this a wheel clamp to protect your vehicle ! 🤔

@paulyates5092 28 күн бұрын

Just go and buy a clamp if you need one, they are cheap enough now and probably longer lasting. If you have machinery like that i'me sure you don't need to spend time and effort on clamps that are not as durable as a shop bought ones. The clamps look very nice but i don't see a hobbyist or Pro wanting a workshop full of these. Another 9.20 min taken out of my life, i must remember to fast forward till the end to see if if the finished product video is worth watching full length, normally its not and this is no exeption, Sorry!.

@antitheist9976 2 ай бұрын

Fantastic idea, well made too, nice one mate 🤩🙂

@jamesrudd6776 Ай бұрын

It seems that some people are against craftmanship. This shows what you can do with what you have. Stop being so blamed negitive!!

@DC-dp3hk Ай бұрын

So whats the thumbnail all about? Just get a set of sash cramps.

@gbodman 10 күн бұрын

They are called sash lamps. Cheap as chips in Lidl.

@nafcd 4 күн бұрын

Certainly are not cheap here in new zealand but i think i would still rather pay than muck about for hours making something that to me looks nice but wouldnt last long in my workshop

@Grumpycat0405 2 ай бұрын

Genius!

@menscraft7985 2 ай бұрын

Thanks buddy

@roseymalino9855 2 ай бұрын

Wnd product too bulky and cumbersome for most tasks. Fine video skills.

@MohsinExperiments Ай бұрын

I don't get why you split the bolts in half.

@David65702 2 ай бұрын

Once again I was thinking what the hell is he making now! I couldn't figure it out to close to the end, great work. What king of epoxy are you using I didn't see the brand.

@olegpankrashkin5081 2 ай бұрын

👍👏👌🤜🤛🤝. Классно. Удачи. Благодарю.

@stefanoghiani5470 2 ай бұрын

Bella idea

@richardeldridge5305 15 күн бұрын

Is this thing somehow useful to clamping on the tires of cars? Why do you show this in the photo?

@ЮрийМакаров-в4д 2 ай бұрын

Классная струбцина, но надолго? Ведь столько сил потрачено

@menscraft7985 2 ай бұрын

Ну да на долго, они то вечные по сути

@klauskraut5417 22 күн бұрын

Not everybody can afford to buy all the tools for making a clamp like that, buying one is much cheaper!🖕

@jimydoolittle3129 Ай бұрын

They cost $6 usd each 🤣

@jamestone265 Ай бұрын

Nice if you have $5000 worth of tools…the rest of us will go to Harbor Freight for $20.00

@1956tojo 2 күн бұрын

Cool I guess, but.................... why? For less than 1/4 of what the cost of my labor is worth to build those, I can buy them and be making cabinets or furniture = $$$$$

@brianredmond4919 Ай бұрын

Wooden sash clamps - nothing to do with cars ☹️

@arn40001 5 күн бұрын

Ganz gut... aber man muss nicht alles mit Maschinen machen,... Fase mit der Fräse usw... das gefällt mir nicht. Das ist die neue Bequemlichkeit

@harleyshihtzu5558 Ай бұрын

Wow dick around all day making a cumbersome balky bar clamp when I can buy one on Amazon for 13 bucks. Ingenious 🤦🏻‍♀️

@johncleave5637 Ай бұрын

Bit of a misleading title, , pointless as any person with these skills, will have a good set already!

@randyfleet9968 Ай бұрын

What's the matter? Cat got your tongue?

@hambone4402 8 күн бұрын

So you made a clamp? What a waste of time.

@fvrrljr Ай бұрын

*all of that just so girlfriend can reach high enough to kiss you*

@billmillar8626 Ай бұрын

You would be better buying proper clamps And probably a cheap !!!!

@steph..4861-r8x 2 ай бұрын

👍🏻👍🏻

@YOUTUBE-IS-COMMUNIST Ай бұрын

Let me go ahead and block this garbage click bait page!

@ClausTd Ай бұрын

Wofür soll das jetzt sein?

@PyromaniaGaming 2 ай бұрын

Hey this isn’t a Minecraft video

@wynottgivemore9274 Ай бұрын

So what's with the tire? I lost interest as soon as I realized no tire was going to be featured.😪 get it tired not only fake , but dumb thumbnails. Why not say what it's about ,instead of attracting the viewers that aren't going to LIKE AND SUBSCRIBE.

@jeanaideux2796 Ай бұрын

"mort de rire" ! Ou encore : "Tout ça pour ça" ?! Et on passera sur les mesures de sécurité jamais respectées avec l'outillage ! Faut vraiment être un pauvre (hyper) narcissique des réseaux sociaux pour diffuser ça ! (ce qui meritera6la censure rien que pour le DANGER que représentent certaines manipulations d'outils sans la moindre protection !)