It takes about 3 Minutes to remove a tail light on a volvo xc90 (no edit)

I just removed a tail light on a volvo Xc90 and it was very easy and it only takes 3 minutes, to install new one just reverse the order
volvo parts store and much more
www.volvoprojec...

[@WatchTheIceGrow]

If you have a 2008 XC90 Forget about pulling the wire harnesses apart. Just remove the base carpet piece that the vertical carpet piece. No need to remove the exterior body section either. Then the two bolts

[@patagualianmostly7437]

You are correct.... I have a 2009..... No need to disturb the plugs or the harness...at least, not for simple bulb replacement. (Love my V8!)

[@damiangriffin6940]

Disassembled with one hand while filming with the other. Pretty impressive. I’m sure there’s never been a bra this man couldn’t unhook in his sleep. But seriously nice video and thanks for the help.

[@JMOSORT]

Legendary man

[@danieldoherty8122]

P

[@thomasscoville1148]

You are hilarious!

[@tedschroeders5289]

After 2014, you're screwed. You have to pull the rear wheel arches, drop the bumper, and pull the rear inner panels. Good luck. It's gonna take a lot more than 3 minutes

[@patagualianmostly7437]

Ah! Progress is all about evolution my friend..... Unfortunately, many manufacturers have yet to accept the theory.

[@christopherking8887]

THIS video saved me $200+... (replaced whole unit - swapped over the bulbs.. good to go in less than an hour) so yeah THANK YOU!!! (TIP: if you have a small extender for a 11MM socket - it makes getting the second upper hidden nut way easier to deal with)

[@danny39uk]

hi there, have you replaced the led circuit? mines ones the day led light stopped working, so I may have to replace the whole unit

[@saatikainen7616]

Hey thanks for the tip, i was struggling so much with my wrench. The 7 seaters seatbelt is on the way so its pretty hard to get to.

[@DeanSoloGuitarist]

Thanks, my 12 year old just did this for me based on your video. Only took 10 mins to change one of the bulbs which is all I needed to do this time.

[@seanclark5613]

One thing to note is for the 2013 and 2014 model years, the tail light and break light bulbs were “upgraded” to LED strips. This means that if a LED strip fails (like what happened on my 2013), the whole assembly has to be replaced, unless there is another option I am unaware of. I just replaced the right side assembly on mine just because it seemed to be the easiest. Very helpful video.

[@thomasscoville1148]

I would like to thank you from the bottom of my heart for this. It would have taken me a couple of hours to figure out how to get to the back of the tail light.

[@passez50]

It took me more then 3 minutes but without your video it would have cost me a trip to the dealer $$$

[@grantcameron9161]

3 minutes and one hand . . thanks for that buddy. 💪

[@msinerva80]

Man I was struggling to get it off because found instructions from manual to open only one bolt to get this done. Found your video and the tip to open the second bolt too and all was easy after that :) Thanks!

[@jeffg.5593]

Clear, simple and complete. Great how to video

[@squidben5780]

Excellent video, with one hand and filming !! Like the comment of Damian Griffin lol

[@thomasharris5151]

🤔Want to put the older style 2005 taillights in a 2008? Is it a direct fit plug & play or do I need the upper portion of the lights? UPDATE..!👌🏾 It was plug and play. The only difference was the older taillights harness wouldn’t work for the rear fog light. Other than that was easy! BUT you’ll need the upper rear reflectors for a flush fit which I had as well.. if not you it’s not a perfect fit(need to trim a lil here and there). I bought all for both sides for the price of a one factory taillight!

[@nabeeljacksonrhoda6480]

I think you're good to go since I believe its only the exterior design where the reverse lights are which has been restyled from circular to square-ish look. But you should be good to swap out

[@thomasharris5151]

@@nabeeljacksonrhoda6480 I did it a few days ago and you’re right it was plug and play. The only difference was the older taillights harness wouldn’t work for the rear fog light. Other than that was easy! BUT you’ll need the upper rear reflectors for a flush fit which I had as well.. if not you it’s not a perfect fit(need to trim a lil here and there). I bought all for both sides for the price of a one factory taillight!

[@robertdowney9482]

Appreciate the video but you don't have to disconnect the whole housing you have enough room to turn it counter clockwise to pull the bulb socket

[@elcamino5145]

Thanks for the help. Looks Simple. Now I can change the bulbs.

[@martinbirrell57]

Good explaination Rome but a little frustrating when the camera was not on what you were talking about. It got me through a painful job - compaired to other cars.

[@WingChunMindForce]

Thanks mate!!

[@terrymoogan8445]

Well done .

[@sarahbeee5240]

Very easy, thanks!

[@uncleshagnasty]

Thank you

[@hardlibra]

Great video, thank you!

[@jnolte]

What size wrench ?

[@retrodad1973]

11mm worked for me

[@hossaface]

10 brah

[@boburakbarov4968]

What is the wrench size you used to remove the inner bolts? Is it 13mm?

[@She_Tried_It]

10mm

[@burningmanmike]

Your next job....working in an F1 Pit Crew!

[@draghorse33]

The top bolt on my 2007 wont come off. It just spins and doesnt release. Any suggestions???

[@TheRoadReview]

Thank you very much

[@DorotheaAntonio]

Thank you that was a great help.

[@michaeljackson7197]

Thank you so much very helpful

[@horaciogodinez3983]

Thanks for the video

[@seshachary5580]

thank you regards,

[@billymcnutt116]

For the record: the weird bolts* @ [00:45] are 10mm. *Specialty cap nuts? 🤷‍♂️

[@sandypilon3582]

Excellent instruction

[@cupcrazy2525]

except for telling the size of the wrench !!!!1

[@stanleythompson5488]

Thank you!

[@abcjg65t]

Good lord ive never taken my entire assembly off my xc90 to change a darn brake bulb.

[@6ohTreez]

How else can you change the brake lights out?

[@ScoutJMusic]

My lead tech told me that's gonna be a bitch to change found your video and yeah just about 3 minutes and I had that changed and a tag light too thanks broham keep up the great work

[@MrDarkestviking]

Thanks now i know.

[@peterhouck8853]

My 06 xc90 has the centre or third brake light not working.. Got an assist for that one?

[@richardmatamoros2504]

Thanks.

[@tedschroeders5289]

...up to 2014. I guess I'm out of luck sound the 2018 is set up different.

[@mobiledetail4you]

10 mil?

[@cglees]

Great thank you

[@doughnutsforlife5971]

If I change the 2005 lights(round light) with 2007(square lights on reverse) lights will fit? Some people say that I need the wires as well.Is that true?

[@xyval7675]

Did you find something out?

[@ljkidd047]

I wanted to know the same. I have 2006

[@ajamusic7322]

Thanks!

[@Joocckkeeyypockey]

This you have under the glace, what is it?

[@She_Tried_It]

Please don't do this so carelessly and with one hand. Don't hold the assembly by the wire with the full weight of the assembly hanging on the wire/connection. You break these PLASTIC clips and you're gonna be spending hundreds for whole replacement assemblies... (10mm used to remove long screw bolt - leave it hand-tight for the next time and you won't need a tool.)

[@Jasn00sh]

Thanks dawg

[@shaundunn3429]

Volvo cx90 2007 gadgets

[@avantgardeautocentre1032]

If i were to install 2012 LED taillamp to my 2008 Xc90 Is it plug n play?

[@ethanvalencia6611]

no

[@nickmarshall2676]

Yo I'm still wondering this

[@Mermasora]

Probably not plug'n'play, but it can be done and it will work.

[@jethroboot]

wrench size would be nice

[@thomasharris5151]

10mm😉…. He did all the work for us we can a least try a few sizes, just grab a 10mm & a 11mm to be 100% accurate.🐰💎

[@Beemer350]

Grom a V90 cc owner: ;(

[@XtremeKremaTor]

Tusk

[@mustafacaldiran3288]

I just gonna vote yes to prop10 only because of this stupid adds

[@romeellison8792]

Thank you

[@ukgardener973]

Thanks so much