Hi guys ive added a new air intake to my custom itb setup. I have lots of videos on this car and lots of other cool stuff on my channel. Be sure to subscribe and ill be happy to answer any comments :)
Пікірлер: 68
@nvl26914 жыл бұрын
Honestly, this was amazing to watch. I am an aspiring mechanical engineer (starting uni in september if all goes well, yes I'm 17) and these videos are insanely interesting. I sometimes find myself in bed thinking about building parts like these, and seeing the fabrication process and the ingenuity that goes with it was very useful. Keep up the amazing work!
@MattBerrymotorsport4 жыл бұрын
Yeah man you will go a long way if you are constantly wondering! I do the same thing myself and it's great to have a idea and then make it happen.
@AnglingAddictssrilanka4 жыл бұрын
Excellent idea putting stock bonnet scoop to great use!!
@Creeperboy0993 жыл бұрын
There’s something simply beautiful about clean and proper custom fabricated parts
@thatbeingsaid87024 жыл бұрын
looks awesome mate well done good to see someone doing something different with a starlet
@MattBerrymotorsport4 жыл бұрын
Cheers mate! It sure is different to drive to the usual starlet.
@djfrankieflowers Жыл бұрын
Amazing custom job!
@fernandofer70973 жыл бұрын
Amazing work! Congratulations!!!
@Ricerguy4 жыл бұрын
Beautiful work!
@silvestree13 жыл бұрын
All the way from Minnesota good job man
@christophertileing41303 жыл бұрын
Like the modifications
@mickholgate33474 жыл бұрын
Good job Matt, was keen to hear it running.
@MattBerrymotorsport4 жыл бұрын
Still needs the tune sorted, I'll have it running this week.
@sftech86mechanic994 жыл бұрын
Awesome build bro!
@bajanboyhood4 жыл бұрын
Well done ,hats off mate.
@angelsandoval6493 Жыл бұрын
A great job my friend. Congratulations from Venezuela. 😇😇😇
@kevin824993 жыл бұрын
that's a fantastic work man
@MattBerrymotorsport3 жыл бұрын
WOW I didn't expect to get 100 likes! thanks for showing your support guys i'm glad you enjoyed my video! here's another banger to watch. Building a compact turbo manifold - kzbin.info/www/bejne/iny8c6OmndVlrqM
@elementmaniac4 жыл бұрын
Great fabrication skills 👌 awesome CAD design 😂
@MattBerrymotorsport4 жыл бұрын
Haha yeah mate the CAD design works great!
@jackverna3394 жыл бұрын
Keen to hear how it sounds compared to open trumpets, looks clean as
@MattBerrymotorsport4 жыл бұрын
cheers Jack, planning to get it registered this week, i havent been able to drive it anywhere yet :(
@jackverna3394 жыл бұрын
I feel your pain boss, I lost my license in Feb and my Sirion GT has been sitting in the front yard since with a dead battery Stay safe 👍
@MattBerrymotorsport4 жыл бұрын
You too bud
@nickamarit4 жыл бұрын
this was so awesome!!!
@MattBerrymotorsport4 жыл бұрын
Thanks Nick!
@edwinsantiago9024 жыл бұрын
Good job my friend 👍👍👍
@JimBrodie3 жыл бұрын
Ngl, when you rattled that ally stock around, my mind went straight to the foley of the dropship crash in Aliens. ^_^
@jeromeep82894 жыл бұрын
Unreal 👌👍
@jacobburns29754 жыл бұрын
Seen this in person today at the tuners, sounds fucking sick looking forward to the Dyno vid
@MattBerrymotorsport4 жыл бұрын
Hey man thanks! I was literally uploading the dyno video just now and the laptop died 😂😂😂 will be uploaded first thing tomorrow
@fila14454 жыл бұрын
That's a big succ energy right there
@christiancianflone17404 жыл бұрын
you are a dragon!!!
@marktamblyn85213 жыл бұрын
Nice fab work. I can see a couple design flaws tho. Careful with odd shape box setups as it can influence air flow, it better to be uniform shape, and not sure on the air sealing of the lid join you have, and the filter too just sitting in there, plus I would have gone a bigger filter . But good one mate.
@EmilioShack1982emilioRoman3 жыл бұрын
Damn this is awesome. You need more views, I wonder how much power you gained using this good vent airbox. I have my itb set up on my 92 Celica st pointing to the fire wall like you did before.
@MattBerrymotorsport3 жыл бұрын
About 5hp on the dyno, seeing as it only makes 110 you can feel and hear it on the road haha thanks man!
@stevesloan67753 жыл бұрын
Whooooow! Great design and fab! My only question is.... does the chassis flex. 😂😂😂
@findtherightbeat3 жыл бұрын
Good fabrication skills, Matt!!
@alexhise9683 жыл бұрын
Bang up job m8 I would have love to see a bigger filter tho
@MattBerrymotorsport3 жыл бұрын
I did think about that but the hole in the bonnet is tiny as it is. Either way it still picked up 5hp on the dyno lol
@alexhise9683 жыл бұрын
I'm looking to build a 2AR for high hp next season. I found some 48mm throttle bodies that are only 100usd for all 4
@DJWizmuzk3 жыл бұрын
That was so cool to watch.... u think this can be made from fiberglass?
@MattBerrymotorsport3 жыл бұрын
thanks! i dont have any experience with fibreglass but i dont see why not!
@peatergriffin Жыл бұрын
Hey mate. Where did you get your little press brake and what is the thickest aluminium it will bend.
@peterstoyanov78974 жыл бұрын
F1 engineering
@paulc23574 жыл бұрын
Matt, I was just thinking of doing an ITB on my Nissan QR engine when I came across your vid. Great job man! I was wondering how you were concerned with rain water coming in through the intake causing hydro-lock?
@MattBerrymotorsport4 жыл бұрын
Hi Paul great question! We only have rain for 6 months of the year so I guess I won't be driving it during those times haha .
@PP-vs3jd3 жыл бұрын
@@MattBerrymotorsport Or modify it to divert water away from the ITB's
@gregfunk95594 жыл бұрын
I was just wondering about the possibility of fitting ITB's on my ride and came across your channel. Great ideas and great work, but aren't the gaps between manifold an itbs a massive vacuum leak? Shouldn't they be sealed?
@MattBerrymotorsport4 жыл бұрын
Hey you are correct there are gaps inbetween the manifold however it has since been fixed. Also there is no vacuum on that side on the manifold. You will only ever see vacuum between the top of the piston and the back of the throttle body plate. Thanks for watching Greg!
@gregfunk95594 жыл бұрын
@@MattBerrymotorsport thanks for the inspiration! When I put my manifold back on, I left off a couple of brackets that meant there were a couple of thru drilled holes into the manifold. On first start the engine revs wouldn't stop climbing. Once I put those bolts back in, the revs stayed down. I'm not sure of the physics behind that... Anyway I may try out your mods on my integrale
@ellistonvaccianna91203 жыл бұрын
Really love that job well done...how much would it cost me for one just like that
@MattBerrymotorsport3 жыл бұрын
Not for sale sorry... took over 30 hours in planning and build time. Not worth selling anytime soon at that labour rate haha
@RyuMoto4 жыл бұрын
Man... That's rad. I'm working on my setup now and will start posting vids soon. How did it affect sound?
@MattBerrymotorsport3 жыл бұрын
the aluminium makes it resonance/tinny a bit, but sounds great eitherway
@98976h4 жыл бұрын
cfm or cm3 volume of airbox?
@user-iu4ir3zm4m3 жыл бұрын
Вот это идея и турбо не надо)
@NazimUddin-yk2tz4 жыл бұрын
You gonna turbo it ?
@jesusbrito64403 жыл бұрын
I have that same engine and I would like you to tell me some tips to ride better on the track
@MattBerrymotorsport3 жыл бұрын
first thing get a sway bar from a paseo, they bolt right up and cost a fraction of the whiteline ones. next up is coilovers and some front camber then tyres
@MattBerrymotorsport3 жыл бұрын
get those 3 things sorted before you try to make it faster, get it to go around corners good first :)
@jesusbrito64403 жыл бұрын
@@MattBerrymotorsport OK thanks brother. I already have the coilovers, I only need a stabilizer bar. mount the header and remove the silencers. I want to know if they can not put a racing cam stick or something that gives me more power