Its Been 2 years! Finally Driving The RX-7!

Be sure to check out Snake Eater Performance!
www.snakeeaterperformance.com
metigulous.com/merch
Insta: Metigulous
Facebook: / metigulous

[@alastairdow-taylor4103]

You and wyatt said your rides would be ready for ice cream cruise two years ago but at least you got yours finished now its your turn wyatt.

[@Headsup9550]

You must not have a sub 12 second car or own a shop. Both will sometimes tell you what they're gonna do! Lol

[@Metigulous]

last time it was out was ice cream cruise 2019! 💀

[@mathewskaggs3955]

@@whoknows3347 1/8 mile no prep car. Can’t get races if you have a funny car cage

[@route222FAQ]

Unfortunately life happens not to mention Covid and it’s 99% survival rate🥲

[@thomasvavra259]

It was at icc in 2019. I was there at Werner park.

[@GARAGEIdiotS]

Almost at 100k my dude!!

[@EdwardAlcala]

Where’s my dawg at?

[@jeffreyl4924]

That smile on your face when you took it for a drive man! So stoked for you to be this close to the finish line on your hot rod

[@imdabeast100]

Same it made me so happy. So much work finally coming to fruition

[@FreddyFunderbunz]

@@imdabeast100 so happy I could shit…

[@clitzcustom66420]

Man seeing those giggles and that big smile makes all that hard work worth it. Keep it going brother. Miss this content you put out.

[@COYOTE_N8]

Amazing build dude. Yea it's takin two years but your a one man show. Super sick man

[@desertwind16v]

Can’t wait to see some passes. You’ve put in a ton of work, it’s been a fun watch to see how far the car has progressed.

[@BassManBobBassCovers]

Super stoked to see this thing driving again! Makes sense the suspension geometry was good judging by how well it hooked and straight it went last time on track even though it's new parts. The engine seems to be running mint as well. Everything is coming together! HELL YEAH!

[@adamsankey8702]

It’s so good to see you smiling and happy driving. You have spent so much time on the car so now it’s time to enjoy it 🤙🏼

[@RaceBrosCarlos]

Good luck tomorrow my ninja!!!!

[@okobojian1860]

Hey Carlos if that comes before Thanksgiving I’ll just bring them out.

[@callanbice4485]

this chassis/motor/trans combo is the recipe to go insanely fast, would love to see a 7.XX with that stock bottom end

[@baby-sharkgto4902]

@sabrina sancez hey bae

[@Kevin-zo6nz]

Eyeball alignment got you close, now spend the $80 and get it on a laser rack at a minimum if this thing is going 160+

[@Matty.Hill_87]

Race teams use strings to set up their cars because its more accurate that machines if its don't properly

[@RaceBrosCarlos]

Every Inch does count bro wish I could gain 2

[@okobojian1860]

Ya I guess that’s true for you short asses,!!! 🤣😎

[@JohnDoes620]

Hey man Catherine up there ^^looks interested anyway

[@gemini3558]

We miss you Carlos and your beautiful cars mate !!! Would be nice to see you in more vids !!! Peace ✌️ 😜👍🇦🇺

[@jtyoung706]

Man I thought you were gonna give up, but you pulled through and thank god you did because old 8 rotor is turning out awesome!

[@billsmith8994]

12:58 finally being back in your car after an extended upgrade period is a pretty good feeling XD

[@georgem.6136]

Damn dude finally it’s back! You built a really bad ass hot rod over the past few years, can’t wait to see what it runs at the track once you get it all dialed in!

[@BrianSmith-id4cc]

Glad to see the RX 7 together. It's been a long time coming. Hope you really enjoy ripping it at the track. I don't think you have anything for the MR 2 but give it hell.

[@tannerharkey]

Not right now but if he puts a good amount of time and effort into making passes.. he’s talking like its gonna be on a lot of no prep and street surfaces but it’s gonna be a rocket on some glue for sure. I’m excited to see how far he can push the stock bottom end. He’s not gonna put it on the Dyno but if he wanted to make it last he could get with someone like squirrel tuned to get a really good idea of what he needs to do.

[@davewilson3951]

Hayden I feel bad for calling her a garage queen last winter. I’m proud of you bro, you’ve built something to be proud of. 😎 😎 🤘

[@stevemacdaddy9909]

While Kyle and Wyatt were gone you were able to get some work done on your hot rod. Your always helping with everyone else's car like a cool bro.Awesome your this close with yours, now I can't wait to see it on the drag strip.

[@bramwakeley7933]

I missed this car ! Can’t wait to see how it does

[@Baldys_projects]

That charge pipe is sick af! I've been watching you for years bro before Kyle's first MR2 engine blew up when it was original lol.

[@sammyboswelldirtybrc7580]

Good to see all the ogs together and happy to see u get the car back going now let’s see it kick some ass

[@xxg0t3mxx]

can't wait to see that match up you and kyle lol been watching since before the cage video it's been a long time coming bro! im happy maybe not as much as you but to see what it has become and got to!

[@NvSrAgE679]

What a change from the first time I saw this car. Wow. We’ll done Haiden.

[@billhill33584]

Congrats my dude! Long time coming and it's looking sick.

[@jayburrough4308]

Just remember that the roads have a crown for water drainage so your alignment probably closer than you know.glad to see it's done good job buddy.

[@imalec]

Glad you convinced Kyle to offset that bar 4”. Can’t wait to see you guys finally race. Hope the mr2 doesn’t blow a rod again!

[@freedomfox8183]

The mr2 never threw a rod with a built engine though that was way different circumstances lol

[@imalec]

@@freedomfox8183 yeah the rx7 is more likely to toss internals.

[@gotmesom]

Bro I think you should move here, you know it's awesome here. Year round drag racing n fun!

[@elminime1]

11:57, love the seat belts and the safety of driving on the streets and doing some light pulls 💪👌👍 13:23 good thing breaks feel pretty good tho

[@Niko9902]

Hell yeah buddy I’m ready to see this thing rip it’s crazy how much you “upgraded” it since the last pass and it was rippin then

[@BFanist]

So pumped! :D Congrats, it was one hell of a journey

[@zethloveless7238]

Ayyy my fav two lesbians Wyatt and Hayden 😀. Been waiting to see this thing finished broski can’t want to see her run 🏃‍♀️

[@drron5608]

Hell ya congrats bro its gonna b flying at the track can't wait

[@Smalltownlyfe]

Dude brad is awesome! Snake eater FTW! Currently running the 1500s ZERO complaints

[@imdabeast100]

I can’t wait to see this thing make some passes. Have fun with it Hayden you deserve it

[@peppermintnightmare4741]

Loving the content, my guy! Keep up the good work!

[@nakedbandit]

Good to see it hit the road. Congrats Hayden.

[@CainSample]

It's a shame Kyle won't help you get over 100k with his million subs....a little shout out wouldn't hurt him😆🤙 congrats your almost there ✌️

[@blaznmax8877]

Good work dude ur work is legit .. glad to see the rx7 back in action looks like a ripper n competition for mr2s

[@johnsimons6748]

Man I'm stoked to see your car driving again, and you being able to enjoy 2 years of work. Hope you be able to enjoy it for a long time and make some killer passes in it! Greetings from Holland 🙏

[@Tazroh]

It’s so nice to see you happy with all the work and effort you put in. Good Job on the long journey with this build 👍🏻

[@chestermcgillicuddy4368]

That was a really good upload dude! Thank you!

[@danielbustillos1925]

This channel is about to take off once the rx7 racing content starts dropping

[@carolcoleman7107]

Great work Hayden. !! So very Exciting 😊 to see..we've missed it too.

[@jasonjaeger7216]

So great to see you driving that monster finally! Excellent job my man. Now go get them 7's! LETS GO!!!

[@danielfmyers]

Can’t wait for the track day video 🙌

[@Brother2Jis_27s4]

We all know how project cars go, we all have a plan, wants, and high hopes. What we think will be a few weeks turns into months and then years. I'm pumped for you dude, I know you having built it you probably can think of 100 things you want to change but let me tell you that you have a badass setup. Only thing to change is that engine, I know you have plans for it so I need not say more.. Keep up the solid work and cant wait to see you do a full rip in it🤙

[@brucepoole7551]

It looks and sounds amazing great job man you’ve definitely been working hard

[@joshs199]

Awesome.!! Can't wait to see some track videos.!! 🤘

[@austincrider20]

Baddass job on the mr2 buddy… so glad to see you posting again man love your channel

[@ShadowMonarch343]

The rx7 seems to put the power down real smooth. Congrats hayden

[@CreamAle]

Happy to see that smile when you drove it.

[@kick_then_shift]

cant wait to see it make a hit on the best prepped track in America BMP

[@mikebanks5480]

Horsepowers convert to large smiles!

[@jonathanstudt9040]

Man soo awesome cant wait to see it make its first pass its been a long time coming 🍻

[@gordiefrench5342]

Great job man Really shows the love you put into your ride Also I am at the point in my sa22c rx7 with the rear end with the gear lash and know nothing about it I am so glad to see you work through the problems Your car has come a long way

[@lkempf79]

Congrats! You should be really proud. Awesome build and you did most of it by yourself. 👍

[@arcadiagreen150]

congrats dude. its been quite a while, now wyatt needs to get the truck together.

[@jowell19901]

Quality work bro 👏

[@joehall2092]

HERE WE GO GUY'S CAN'T WAIT TO SEE THIS BABY RIP ,,, LOVE THE CAR 🚗

[@THECREW03]

Glad to see you driving, killer job

[@wolfparty4234]

Bro!! I can’t wait to see that thing start to eat!!!💪🏼🔥🔥🔥👍🏻

[@swrvtech]

Done many of those alignments when I was a tech for the Mazda mx5 cup. Make sure to add your weight to the driver seat to make it more accurate. Love the content and keep up the grind man.

[@PaymhGaming]

Hey man, haven't watched in a few years and stumbled upon your channel again, you're looking good from when I remember!

[@neilorange4112]

Good job man I'm glad you took your time with it and did it right it looks like a show car I can't wait to see you at the track

[@snowmonkey1035]

Time and hard work paying off . Keep posting stay focused.

[@darnjoel1]

Looks great man. 👍

[@route222FAQ]

I’m super excited to see you finally get to make some passes down the track and hopefully at Rocky Mountain race week! Race week is a mfer but you never know!

[@Daremore]

I’m soooo hyped your car is back and driving

[@williammercer6765]

I am happy to hear that v8 rumble i can't wait to see more on it

[@jimmypatriot5203]

Happy for you bro!

[@durfmann12345]

Bout time! Good shit!

[@bradleyslusser2279]

Glad it's back. Hope it stays together for a while this time

[@mustangman4valve]

For the toe, an easy to remember thing! Toe In the high side. So if the left side of the wheel sits high. Toe in the left. And Toe out the right the EXACT same amount and it will NOT change your total toe:)

[@MillionairX]

Good job bud!

[@libertylifestyles3806]

Sweet bro, wish I had your skillz!!

[@kylearruda1041]

The pivot point of the control arm and inner tie rod being that way is perfect and exactly how to set it up with the least amount of bump steer

[@l8tapex]

10 years same on the 92 FD...98% done but when it came to cutting the front of the R1 for intercooler I said nope. Now Im building 6.2 hi rev so I can always revert back to Doritos and sell if need be. I enjoyed the vid.

[@paulforrester4057]

Well done mate ✌️

[@thesquirrelchroniclesakare7808]

Nice job checking the lash bro ! You can't be too careful

[@robertrobinson2317]

Great video love the information

[@Brandobmx]

Hell yeah. Excited to hear the reference to Tin Soldier Race Cars on here. I went to their shops Open house party Friday night.

[@93jdmmike]

Good stuff buddy

[@hangfire6368]

solid video.

[@lparker7625]

Haha yes. That smile after it came on boost. Pumped for you Hayden

[@santapodracer1980]

Great job 👊🏻

[@liamdunne2027]

Love to see it! Nice to see it back out, but put your dam seat belt on!

[@SirVic42]

That thing is going to launch so hard you should wear a safety collar.

[@luke_james]

Love this fb 🇦🇺🙋‍♂️ kinda wish u did Ti dumppipe but

[@route222FAQ]

That intercooler pipe is sick AF! The car is going to be a monster once you get everything dialed in! Congratulations on getting it done! For now at least 😂

[@floppydonger1189]

build is looking sick man! hey just a lil tidbit i do when im using an offset on a tape measure (carpenter) i offset it to 12" because most tapes have another set of numbers that start over from 1 at 12"

[@drew53832]

Man you worked way to fucking hard for this. I can't wait too see your work put down to the pavement.

[@rogerruble4929]

The roads in Florida have a crown on them so rain drains to the right side of lane thus is why u have to turn slight left to go strait.any good alignment shop will align for that . or u can solve with a couple pounds of air pressure in right side tires. from a Florida man.

[@Jacobtheunwise]

I dont ever comment on this channel but i just thought id say the rx7 turned out so amazingly beautiful all the work you've done is top quality. Now to race kyle😅

[@evafrasslewis5664]

U just turned your dream into reality. I salute u bro. Now go and enjoy your car bro the world is happy for u getting so much done in such a short time.

[@stoker20]

I remember how the car ran before they kicked you out. I think you will gap Kyle at the 60' before he comes around?? I liked the smile on the face when you poked it. It's been a minute!

[@staybaked1224]

Congratulations brother

[@Drunk3nMas7er]

Man, watched the build vids for a while, congrats for getting it together and hauling ass again :) What a mint build. Alot of your work is too OCD, I reakon you release it like project binky vids that are super condensed and make it look like magic and not 1000 hours.

[@shanewright6958]

The car is looking good 👍👍🇨🇱

[@cameronwallace12]

Put it on cleetus dyno