Hi Good video, curious to know weither there was any copper washers under the injectors
@kieferste3 ай бұрын
@user-zn4fm2zd6t yes I put new washers on
@AnthonyMcCarthy-m6y3 ай бұрын
@@kieferste Thank you for your reply
@digitalslot13sadzambodza99 Жыл бұрын
Good demonstration , however what can cause injectors to leek after cleaning and closing up.
@kieferste Жыл бұрын
Making sure the injectors seats are clean depending where its leaking from
@digitalslot13sadzambodza99 Жыл бұрын
@@kieferste they are leeking on the joint between the lower and uper cover .there is black material that melted and was pushed out through the threads from inside the injectors.those who trying to repair seams not sure what could that be.
@joeamanfo5970 Жыл бұрын
Nice video I also have an Iveco daily 2.3 with a hard start
@kieferste Жыл бұрын
Have you checked the fuel pressure on the rail there's a sensor check the voltage on the 3 wire plug the middle wire should be at 0.5v on cranking you want to see near a 1v or just over off the top of my head can't remember the specs
@joeamanfo5970 Жыл бұрын
@@kieferste thank you very much for your answer I have even replaced the pressure sensor on the rail I have also replaced the fuel regulator pressure on the injection pump I did a leak off test of the four injectors to see the flu but they are uneven
@kieferste Жыл бұрын
How uneven are they if its a big difference on one or 2 that's your answer the reason I asked your voltage is to see if your getting the pressure
@joeamanfo5970 Жыл бұрын
@@kieferste One of the injectors filled the test tube while the other barely at half of the test tube
@kieferste Жыл бұрын
That's your issue
@tomandsharonmcc6423 жыл бұрын
Back on the van! ...I better get my finger out if we're going to Ireland after the lock down🙂....
@kieferste3 жыл бұрын
Yeah you need to mate I thought you were on it
@tomandsharonmcc6423 жыл бұрын
@@kieferste I am little bit at a time lol...
@kieferste3 жыл бұрын
So I've put the injectors in but before I took them out the battery was dead charged it up now it won't start there's no power to the injectors coincidence or what