Bricklaying - Gables Done! Onto the next JOB!

Bricklaying - Building Gables!

[@ringstinga]

Another cracking job Izzy, Drew certainly getting a good work out for the marines ! Well explained and your attention to detail is exceptional . Respect from Scotland.

[@IzzytheBricky]

Thanks so much Jim! Always great to hear from you! Hope your doing well and the weather is alright up there for you 😉

[@rickyraw5457]

Always great to see your quality workmanship from start to finish.....👍😁

[@IzzytheBricky]

Thanks mate!

[@ScratchyBaws]

That's some nice brick work right there.

[@SteveAndAlexBuild]

Great job Izzy , big old job that. Nice bit of dentil work up to too 👌🏼 like the top for the landing brick 🧱. Nice 👍🏽🧱

[@IzzytheBricky]

Thanks Steve mate, appreciate it! Ey I'll be seeing you soon! Hope you lads are well! Have a good weekend

[@SteveAndAlexBuild]

@@IzzytheBricky 😁🤜🏽🤛🏽🧱👍🏽

[@derryjones1029]

That brick work on top of the gable end looks really good quality job

[@IzzytheBricky]

Cheers brother appreciate it

[@TheDeepExplorer1]

Invest in a little clip on mic bro. The wind noise is a pain in the hole. Love the videos though mate I’m a truck driver and I sit here and watch these at night. I would love to try bricklaying for a day hard work but yous are great at it. Respect from 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@IzzytheBricky]

Hiya mate much respect for what you do 💪 hope your well! And on the later videos, I have a mic ☺️☺️ all the best

[@topgazza]

Had to subscribe after watch a couple of your vids. Proper craftsman and very entertaining

[@IzzytheBricky]

Thanks so much mate really appreciate it! Glad you find the videos entertaining and cheers for the kind words🤜🤛

[@chapman9230]

I am merely a self taught amateur bricky. I do it myself because I can not find a good one. I love the neat crispness of your work. Loads of tips. Thanks for posting. One question, I did not notice any ties in the bulk of the wall.

[@IzzytheBricky]

Brilliant mate! I'm also self taught 🤜🤛 appreciate the comment, new video out today ☺️ erm I'm pretty sure I would have put ties in that wall 💪 hopefully 😂

[@Immobiliermarrakech5933]

A wonderful achievement my friend, I am pleased to meet you, I always benefit from your experience, thank you

[@IzzytheBricky]

Thank you very much ☺️

[@captainscarlett705]

Skilful and professional, nicely done 👍

[@IzzytheBricky]

Thanks Scarlett! 😊

[@jensrathjen7190]

Tolle Sonnenbrille 😁

[@MrCharlan1]

Amazing job Izzy, love your watching, it's where I want to be one day taking on my own extensions! Keep the vids coming brother

[@IzzytheBricky]

Thanks so much mate! Untill a year or so ago I was still in a gang mate, just takes time and practice...and some confidence to go do it! You got this! And confidence will come with experience bud

[@garykrell2058]

Nice looking brick work in Texas we usually brick up the gable ends they don't want to pay extra 😊but it makes for a good looking job

[@michaelhall6004]

It’s all going to be hidden but let’s do it right anyway, love that 👍👍👍👍

[@Doug....]

Nice job Izzy. Full joints on the block-work says a lot about you 👍 Shame Drew has got stir crazy in these last weeks. Drew I'm sure you watch these vids. I know you're leaving for something you wanna do badly but don't burn your bridges on the journey to the other side mate. You never know what the future brings. You've had a great mentor up till now. Not many young people get personal training like that. Good luck in the Marines 👍👍

[@IzzytheBricky]

Appreciate your support as always my mate Doug! He's still smashing it, had him wamming some bricks on a garden wall yesterday, each one bang on! I think he should definitely make a channel so we can all follow him on his journey!😉💪🤜🤛

[@sean550]

This guy is as good if not better as many I've seen on KZbin...

[@IzzytheBricky]

Cheers brother 🤜🤛

[@davesaxon7348]

Lovely job mate, class.👌

[@IzzytheBricky]

Thanks buddy appreciate it!💪

[@dciburnsidesniffsniff6119]

Lovely job pal you got great view of the bedrooms over the road 😂😂

[@quincydemetrius399]

Nice work , I also sign my work for future generations 😀👍

[@IzzytheBricky]

Always nice to leave a part of yourself up there isn't it buddy 😊🤜🤛

[@bchdsailor]

I'm still impressed by your excellent work Izzy Kudos to Drew as well

[@IzzytheBricky]

Thanks Huse! Have a good weekend

[@glynstorer3269]

Another excellent job

[@BUILDA__L]

Exactly the kinda dude is enjoy working with 🤘

[@IzzytheBricky]

Cheers buddy

[@stuartalderson6805]

Brilliant brickwork fantastic

[@IzzytheBricky]

Thank you very much Stuart 💪

[@piercepbrowne]

God Bricklayer, nice work

[@goldentrowel1968]

Great workmanship as per usual .

[@IzzytheBricky]

Thank you very much buddy, appreciate it

[@adamandmichelle59]

Izzy Izzy Izzy oi oi!! Another belter pal 👍 get the cash in whilst your young!

[@IzzytheBricky]

Oi oiiii 🤜🤛 cheers brother appreciate it💪💪

[@user-DANWALKER1066]

This handsome chap is an absolute pro! I DONT see why the small corbel NEEDS to be toothed in as he used ties. Absolute pro nice and methodical

[@johnbryant6572]

Very nice work.

[@alisharif1997]

Good man keep do what you doing 🏘️🏘️

[@richardhumber318]

Always great to see your work. Hang tough

[@topcatcoolio8807]

Top man Izzy. Think we'd all like to work with you and crack on, enjoy and have a cheeky pint or two after. Good tips for everyone too. Class man. Best to you God bless!

[@IzzytheBricky]

Thanks so much mate, do appreciate all the support! I've got a new lad with me now! Seems very keen and very switched on👌 Hope all is well and the family are doing good

[@topcatcoolio8807]

Yes mate. See u were up my way in liverpool. Good time there buddy. I'd show you around

[@renfordfraser]

Amazing work, but can the wind noise be sorted

[@chriskhan2010]

Tooth out the brickwork for the corbel and 3/4bat, very nice job though 👍

[@Thomas-pq2qz]

Nice job Izzy.

[@andrewbainbridge3972]

if you corbel is elevated out imo i would of done same with over sailers

[@IzzytheBricky]

Cheers mate, tried to keep is somewhat similar to the existing house. But your probably right. Dry verge is gonna hide 80% of the details anyway, which is a shame really Hope your well

[@Cp3659]

@@IzzytheBricky is that rock wool insulation?

[@atthachaikhoeikarn2562]

Awesome work!! 👏🏻

[@IzzytheBricky]

Thanks fella

[@layersb160]

Buy yourself a hoist mate will make a huge difference in time and your energy. 2 things you want to keep at a minimum.

[@joshuamatheron1]

That method only works if it’s a 45 degre pitch. Although I guess it’s close enough for what you need. Very nice work

[@IzzytheBricky]

Cheers mate, yes your right there, think this was about a 40° so it was bang on pretty much

[@Алекс-г2щ]

Отличная работа! 👍👍👍🔥🔥🔥

[@creativetag1]

Bet his uncles fuming watching that

[@IzzytheBricky]

😂😂😂😂😉

[@markhoulding1938]

Mint job pal 👌👍

[@IzzytheBricky]

Thanks Mark🤜🤛

[@stuglover1526]

Absolute cracking quality work mate. The videos just keep getting better Izzy. 🧱👍🏻

[@IzzytheBricky]

Thanks so much Stu! Appreciate your support as always! Hope you had a brilliant weekend 🍻🎉

[@CCCP16]

There must be a LARGE air space gap in-between the face of the insulation and the OUTER wall inside the cavity ; this includes an air space gap in between the face of the insulation and the cavity-wall-tie drip points(which are in the centre of the cavity). Ask N.V.Q. City & Guilds BRICKWORK teachers for PROOF of this !

[@Berry-fr5wj]

You are a professional

[@GuyTaylor-f5l]

What are you doing are you allowed to use a tressel scaffolding on top of scaffolding without a hand rail in place.... Please explain a very concerned fellow bricklayer....

[@feroz78638]

great work as always!!! loving the content!!! stating the obv, but why don't you get a brick elevator would be easier to transport the bricks thank you for the content

[@liamconroy9276]

Cause you have let your corble stick out you should of had the 2 course detail stick out as well would look better,

[@samsdadalways888]

Great video. So much energy! At 7:40, were you safe with the extra stand to reach the gable? The height of the scaffolding was now quite low. Glad you are safe.

[@IzzytheBricky]

Thanks so much mate! Always try and keep the energy up! Was a big dodgy on the scaffolding, but we go there in the end!

[@YTB3r]

So awesomw

[@whyyoulidl]

Nice one. Getting inspiration and the hands-on know-how for an ambitious self-build on a tight narrow site between two semis where I reckon one facade will need to be built overhand (how the hell will I get it pointed sweet?!!) Subscribed and looking forward for more content.

[@IzzytheBricky]

Depends on if you can see the brickwork from the other side. If it can be seen your gonna have to point it mate. Best to do 3/4 course and then stand on something like a hope to reach over and down the point it up💪

[@brickrightbuildinglandscaping]

Nice tips i do miss bricklaying i am a bricklaying by trade you make me want to go back but my back elbows and shoulders would have something to say about it issac . Great job bricklaying just love it but as you get older it crippled me mate . Good luck brilliant enjoyed that . Justin 👍 🧱🧱🧱🤣

[@IzzytheBricky]

I've seen your brickwork mate though your videos and it's bang on mate! That radius wall you built was awesome! When we meet in July we'll have to get a few down together for a laugh 😊 Guess I've got that to look forward to😂 Thanks for your support Justin! Hope you lads are all well! See you in...4 weeks now!

[@alwynmaguire8037]

Lol me too, if only the prices of brickwork and blockwork which they are today, I wonder if we would have had to work so hard as to have batterd our bodies so badly. I used to kill myself every day on site. 51 now and feel messed up.

[@brickrightbuildinglandscaping]

@@alwynmaguire8037 spot.on Alwyn 👍🤣

[@mreverybody1150]

As we get older its the lack of (MSM) organic sulfur, vitamin C and hydrolyzed collagen that causes the problems. Those minerals repair any damage...like cement...but we run out so the mix gets too soft.

[@truthseekerreal1]

You seem a good lad, i have a huge park to build in Basra Iraq mountains of brickwork if you might be interested

[@moorwalks]

I couldn't see any wall ties and then I saw one when I froze the frame when you mentioned corbells but still couldn't see more?

[@scottnever8732]

Lovely brickwork again. Will say corbel would look better if you put headers on the end ( less than ¼ bonded) also how did the roofer get over the last course of your corbel as I bet its more than 50mm above the rafter end so above facia board? Other than that awesome 👍

[@epm3929]

Great video very informative as to why and how you are doing things 👍

[@IzzytheBricky]

Thanks mate! Glad you found it helpful/informative 🤜🤛

[@identitywithheld1027]

Excellent content

[@IzzytheBricky]

Thank you very much mate

[@kevinhancock4064]

L SHAPED 10mm ply as a template nice work

[@FB-uj2jt]

very impressive good work you two sometimes it's good practice to do some detail brickwork instead of banging hundreds of bricks a day

[@IzzytheBricky]

Thanks very much mate, really appreciate it

[@christopherlaub4069]

Should of layed it together or toothed it instead of a Cole joint and I hope you don't step the flat side

[@dannydonald380]

This is a young man's job.

[@IzzytheBricky]

Definitely mate

[@ocean686]

top builder

[@IzzytheBricky]

Thank you!

[@lsa8164]

Good attitude but the corbels are completely wrong pal they need headers on the ends.

[@clivehyde1756]

😜good enough run 🏃‍♂️ 👌

[@IzzytheBricky]

😂😂😂😂😉

[@mastersamurai7683]

When you hold the brick 20mm away to mark it...does the pitch of the slope matter? I'd guess yes?

[@IzzytheBricky]

Yes you are right there mate, however depending on the angle, reflects how much. In this case it worked out perfectly and can work OKish to about 35-55°

[@rhysthebricky2171]

Brilliant work buddy, and congrats on finishing that gable! Sorry I didn't comment on the last video, I've been revising for some exams. (Not C&G exams, I've passed all those!) Keep up the brilliant work as always, looking forward to the next one mate! 👍😁👌👷‍♂️🧱🧱🍻🍻

[@IzzytheBricky]

Thanks so much mate! Hope everything is going well your end! And well done for smashing your exams buddy! Really pleased for you!

[@stuartnicklin4101]

was it 1mm out in the length of the....spirit level the catnic ? The opening ? or the complete length of the facade? Cheers

[@JDNBrickwork]

Mint job izz

[@IzzytheBricky]

Eeey cheers boyo! Shoot me your number bro so we can stay in-contact while your off IG x

[@danfenton89]

Nice job again mate 🧱👌

[@IzzytheBricky]

Cheers Daniel 💪🤜🤛

[@nikeprojoe]

Hi mate im joe im 28 and I have autism and I'm going to start going to college to be a bricky there's good money in bricklaying and its a good trade to get in to and it's something I've always wanted to be mate and your bricklaying skills are sick bro also is it hard to do it buddy👌 👏

[@IzzytheBricky]

Cheers mate, sorry only just getting round to all the comments. Best of luck to you buddy! Persistence is key! Keep at it and keep practicing! You'll get there, if you want to💪💪 if you ever need any help, drop me a message and Instagram and I'll help you if I can!

[@viankalobosvalenzuela7456]

Excelente trabajo 👊 👏 💯 🧱🧱

[@IzzytheBricky]

Thanks buddy 🤜🤛🧱

[@alexsteele1632]

That theory only works if the roof pitch is 45 degrees

[@IzzytheBricky]

Thanks mate you are right, however, so far, I've not had any issues doing this little method. Hope your well mate and enjoying the good weather

[@damo8754]

8.24 is that the back of a brick sir 😂 Very tidy work though 👌

[@IzzytheBricky]

Thank you very much mate

[@anthonyflynn3837]

That corbel is shocking

[@eliotcurtis3551]

Why not just tooth out the corbel

[@Geeven1]

Hou Do you set Out the hockeystick ?

[@shaunclemens7608]

Great job Izzy , what make is the green level ?

[@IzzytheBricky]

Hi mate thank you! It's an Imex level! Brilliant bit of kit!

[@stuarthickman5584]

Get your to do your cuts as your going .you mark it he cuts as you go along the line .

[@Thomas-pq2qz]

What were you saying about Drew’s uncle?

[@robertdrew8038]

That corbel is absolutely fucking horrific. Why didn’t you just cut the headers out and bond it in? I’ve watched a lot of your videos and your work is usually at a good standard but those corbels have really let you down

[@IzzytheBricky]

Hiya mate, I'd have to disagree with you. Next next door had bonded in corbels and I thought they looked horrific. I guess it comes to personal preference. The customer who is VERY VERY particular much preferred the way I did them rather than next door or what were originally on their house. Cheers Robert bud, hope your well

[@robertdrew8038]

@@IzzytheBricky well as long as the customer is happy but not the way I’d have done it

[@stuartjones1982]

@@robertdrew8038 doesn't matter you're not the customer

[@robertdrew8038]

@@stuartjones1982 thanks for pointing that out for me 🤷🏻‍♂️ if you post videos of your work online then you have to expect positive and negative comments

[@stuartjones1982]

@@robertdrew8038 maybe. But it's incredible how many negative points are made rather than positive

[@ELECTRICLIFE4U]

👍👍👍👍👍

[@IzzytheBricky]

Cheers brother 🤜🤛

[@ELECTRICLIFE4U]

@@IzzytheBricky Nice work👏👍

[@deeza678]

When you through your time ….get more money keep at it 👍

[@IzzytheBricky]

🤞🤞

[@liammchugh8162]

Nice work issy just wondering if you guys wash your own brick of do you sub it out like here in the states

[@IzzytheBricky]

Hi mate! We sometimes wash it down with acid..but not too often Have a good weekend mate

[@svenglish89]

I thought Drew was joining the Marines? You’d think that would motivate him to work hard for his fitness. Is he overdoing training in preparation for the Marines so too tired to work on site?

[@lessismore83009]

Not seen izzy on sites only private jobs.

[@pauldurdan1549]

Where's your truss straps?

[@IzzytheBricky]

Hi mate they are there 👌

[@jackhadfield3943]

Did you go to college to learn? Wanting to get into the trade mate!

[@IzzytheBricky]

Hi mate, no I didn't learn in college. I learnt on the job and once I was a Bricklayer I got my NVQ that way

[@pedrostokoe1980]

can i ask what make that level is as i only buy stabila with me having no problems in the past with them

[@IzzytheBricky]

Hi mate it's an Imex level, brilliant but of kit

[@davidlynch8761]

Why are you calling it an oversailing course if its not oversailing?🤷‍♂️

[@drain-unblocker]

Very tidy

[@IzzytheBricky]

Thanks very much mate!

[@markpowell4511]

Thats on the bellway site chalfont drive.

[@IzzytheBricky]

Haha yea it is mate 😂

[@IzzytheBricky]

I'm there tomorrow mate, if your about pop in

[@markpowell4511]

I was there this morning just round the corner looking at some electrical problems. Not there tomorrow though 🙃

[@FoxFox0077]

You have got to get lift, any lift, instead of lifting bricks and blocks by ladder. Or You will be very old very quickly😢

[@lmilne4859]

Make a great teacher buddy.

[@IzzytheBricky]

Cheers my mate!

[@piercepbrowne]

No safety Handrail

[@nigelsmith1198]

Izzy, where did you get level.??

[@IzzytheBricky]

I got it from Imex mate! It's a crazy bit of kit, bang on for setting out and steel work

[@soldtobediers]

Know you don't give 2 sh@'s about an old timey Texas Bricky of the mid 70's Izzy. But here goes... Fresh out of the U.S. Paratroopers; my desires were to work the summers learning to become a Texas brick a layer & a stone a mason during the summer months & earn a degree towards becoming a high paid Psychiatrist during the winter seasons. First day on a residential job as a helper I learned to make the formula of the mortar. That night it had rained so the formula was offset to the point of almost running off the mud boards of the foreman & his bricky. He then whispered to me - ''Hey Rock: think you could move that 55 gal. water barrel a little farther from the mixer for that next batch of the day?'' @ which I replied ''No sweat boss.'' And upon my return for the 2nd wheel barrow load: I took the time to steering wheel that now nearly full 400 lb. drum of water 2 rounds away from the mixer. Whereupon both he, the other mason, & both their helpers stood fast in awe as I shouted out to the foreman... ''How's That Boss?'' I'll never forget to this day the first time I saw his trowel bury 2''' deep into his scaffold floor board: as he then leaped from it & proclaimed for all to hear... ''Dammitt All Son! Your gonna make a bricklayer. You got a strong back & a weak mind!'' From that point on, he saw to it to get me up on his walk board to spread his mud before him & to hand him his brick: each time we hit the long money walls from the front garage, to the kitchen, to the back yard of the homes. I'll shut up now with the gestalt of my thesis of it all... ''There's no construction material touched & adjusted more, on any building than that of the lowly brick or stone. None!'' ~Just another one of those many one's of ''We The People'' Who's awaiting His Just⚖Return🪃- as The stone which the builders refused is become the head stone of the corner. ~Psalm 118:22

[@Backswell]

Izzy might not give a hoot but a new blood on this side of the pond enjoyed the read, God bless

[@qualcommchalloner9551]

still enjoying all the work however it's becoming more difficult to watch you both as the swinging from side to side would make one seasickness please slow that phone down!!!

[@IzzytheBricky]

Hiya, sorry do apologize for this, I'll try to work on it in the next few videos!

[@qualcommchalloner9551]

@@IzzytheBricky Not to worry Izzy we all the same when trying to complete sections of work, warmest regards Malcs in Perth WA

[@davidhopwood7491]

If the corbels everywhere are flush? Why on earth would you change on a extension which is supposed to be an extension of what’s already been done? Poor.

[@IzzytheBricky]

Good point, but I personally think the corbels which stick out 15mm look much better than the flush ones. The customer preferred what I did. Which is a win win

[@davidhopwood7491]

@@IzzytheBricky I agree, they do look better. That’s not the point. All the best.

[@solentslayer2745]

Everything was going great until the corbel was shown ... corbel was badly bonded in every way, built weak with drilled in cavity ties?! You should have sucked eggs toothed out least would have some strength back into it

[@ravingiron9356]

Didn't like that detail on the knees. Not bonded in and all stretchers? Not enough back weight and i would have ran EML too.

[@markjefferson7492]

Where are you based?

[@E69apeTheMatrix420]

Man you weep vents look ugly that way around! Turn it 180 and flip it upside-down. Read the side of the actual weep vent it has instructions on it. You can use them both ways around and the other way around is much cleaner look than what you did. I know because I made the same mistake and had to cut them out

[@IzzytheBricky]

I had no idea about that mate😂 yea these are probably the worst vents I've put in! Cheers for that mate, appreciate it buddy💪🤜🤛

[@E69apeTheMatrix420]

Amazing job by the way! You smashed out in a day what takes me a week. Im not a bricky tho. The way around you did the vents are at an angle, I put them the wrong way pointing up so the rain would go in and the water in cavity wouldn't go out! But if you us the other side as your front then it has mm markers on the spout. Ones marked for brick and render etc so you know how far to have the spout poking out. Hey I have a massive problem ATM. I just rebuilt my gable end was bowed and cracked major. Had to pull fascia backing board forward 45mm at top peak and put noggins in order to be able to build up level! I'm redoing the fascia now and just realised my soffit on the left side is 1 brick higher than the right side! So my box ends will look odd 1 bigger than the other! I always wanted corbels but I only have scaffold up the gable end. Can you cut out and tooth in a corbel with just scaffold on the end? And how much should I pay a brickie to do that? Roughly? Grand job you thought me lots aswell.

[@E69apeTheMatrix420]

Amazing job by the way! You smashed out in a day what takes me a week. Im not a bricky tho. The way around you did the vents are at an angle, I put them the wrong way pointing up so the rain would go in and the water in cavity wouldn't go out! But if you us the other side as your front then it has mm markers on the spout. Ones marked for brick and render etc so you know how far to have the spout poking out. Hey I have a massive problem ATM. I just rebuilt my gable end was bowed and cracked major. Had to pull fascia backing board forward 45mm at top peak and put noggins in order to be able to build up level! I'm redoing the fascia now and just realised my soffit on the left side is 1 brick higher than the right side! So my box ends will look odd 1 bigger than the other! I always wanted corbels but I only have scaffold up the gable end. Can you cut out and tooth in a corbel with just scaffold on the end? And how much should I pay a brickie to do that? Roughly? Grand job you thought me lots aswell.

[@E69apeTheMatrix420]

P.s. just encase you didn't know the regs are for the dpc to overhang past the lintle each side by 150mm minimum and curled to the next nearest brick. You probably know that though. Lol to job

[@IzzytheBricky]

Thanks so much mate, I appreciate any information on little things like that, helps to know these things!

[@michaelspeed2419]

Big head