You'll be a HALF DOVETAIL master if understanding this two spacers [woodworking]

[@Baerenbruder87]

Impressive demonstration. Consider using a straight bit first (max diameter is the "smallest width") to clean out the bulk of the waste to save your precious dovetail bit. As seen in the video using only a dovetail bit will burn/destroy the bit and the created incision if you put too much stress on it.

[@jucepineda]

Espectacular trabajo. Gracias👏🏼

[@rolandgdean]

It has taken me YEARS just to get my BOX JOINTS to a level of precision I can stand to look at and work with. I may wait until retirement to tackle dovetails. It's just too much maths for me without some kind of jig. I LOVE the shot of you just sitting there wracking your brain doing maths...I'd be pulling my hair out and throwing the pencil and pad across the shop...lol. I notice an injury on one of your fingers...I hope you're ok buddy. Great video and I'll see you again on the next one.

[@j-woodworking9573]

Why don't you have a close look at it. It is not difficult. If you understand how to use the two spacers, you have almost done it. Thanks buddy.

[@rolandgdean]

You're right of course, J. I just need to press in and I know that when I do, I'll figure it out and kick myself for not doing it sooner...lol.

[@rafaelkoga5762]

very beautifuly done!! thank you very much for always teaching us!! I like the ending song! 🙏👍

[@thomasloggie3191]

Beautiful to watch, near impossible to duplicate. Not a teaching video just entertainment.

[@trueleyes]

I've watched this video several times and I am still very impressed with its ease and simplicity. I only reason I still prefer hand-cut is that I feel I have more control in all aspects of doing dovetails. very nice video.

[@gallanonim2839]

Great precision and patience! I love to watch Your work Sir, thank You for sharing.

[@setiawanprojek1539]

Sangat bermanfaat pak. Sukses selalu

[@ЮрийМир-у6о]

Очень профессионально! Спасибо! Главное понять объемность соединения и модуль разметки. Геометрия в объеме.

[@jopperdepopper]

It looks simple... but I haven't grasped the logic behind it yet... Maybe I should simply copy what you do step-by-step some day... Very nice joint like this.. 👍

[@dogo2462]

Very useful and creative, nice work my bro!

[@hellboyPLB]

You are God! 🙌 Amazing work again. Thanks for your amazing videos. There are many comments on this video, and I don't know if someone asked this question before, but... what kind of wood is it? Sorry for my ignorance

[@nobuckle40]

Perfect fit. I think this method would be great for cutting several joints. If I had a lot of drawers to do, I would still use a commercial jig.

[@MCsCreations]

Really beautiful work, man! 😃 Thanks a lot for all the tips!!! Stay safe there with your family! 🖖😊

[@kuliseadanya9103]

beautiful master 👍👍👍

[@MrRsg99]

Thank you for sharing!👍

[@eballacharles0302]

😲😲👊👍 like this dovetail project

[@hanifisen6824]

Ustacığım, ben Türkiye'den yazıyorum.yaptığınız iş çok güzel ve öğretici. Fakat, C ölçüsünde bir yanlışlık çıkıyor. A+B toplamı 29.27mm.çıkıyor.Siz 29.44 mm. Veriyorsunuz ölçüyü, acaba hangisi doğru? Cevaplarsanız sevinirim.

[@user-ssrshin]

이번것이 더 정확할듯 하네요 어제 올릴줄 알았는데요 이젠 일요일 9시 전후로 올리시는게 어떠한지요 그래야 독자분들도 그시간을 기대하지요 연귀자,디지털켈리버두 구입하셨네요

[@j-woodworking9573]

저에 대해 속속들이 다 파악하고 계셔서 거짓말을 못하겠네요. 감사합니다.

[@user-ssrshin]

@@j-woodworking9573 헉 스토커!!!!

[@jerrystark6766]

Excellent technique. Thanks!

[@TrisWoodworking]

Nice bro👍👍👍

[@ashokmoghe8035]

Absolutely awesome ! Thanks for sharing the technique. I always wanted to but I feel I could try a dovetail joint now. BTW what wood types are you using - they look beautiful and look like pine & redwood but not sure. Thanks in advance.

[@j-woodworking9573]

Douglas fir. Thanks for watching sir.

[@user-ssrshin]

홈파기 반턱지그에 대해서도 이해하기 쉽게 만들어 주세요

[@일호김-h3z]

정말 좋아요 ㅡㅡㅡ

[@j-woodworking9573]

감사.

[@mhes4351]

Nice work......What species of wood do you use in your videos please ?

[@j-woodworking9573]

Douglas fir. Thanks for watching sir.

[@jpdreamsPWS]

Noticed OSB on walls. Did you move your shop ? Like the way you are able to hide the over cuts by trimming the pins.

[@j-woodworking9573]

No I didn't. I installed OSB's couples of months ago. Thanks for watching sir.

[@JoseSilveira-newhandleforYT]

Perfect!

[@Momoka7]

The thing I was wondering was how will the dovetails fit in, the end of the hole being round. Cutting a chamfer solves that easily while still maintaining strength where it is needed, nice trick.

[@reyesjnj]

I can see my self with a lot of scrap wood if I went this route I do like the video though.

[@Volganin]

Хорошая работа! Маска от Ковида или от пыли?)))

[@j-woodworking9573]

Dust mask. Thanks for watching sir.

[@mustafanaser4099]

excellent, but you didn't show how long the distance you move the fence each time you cut the femal.

[@AndreiIR000]

Excellent work as usual! Thanks! 02:17 is the mask necessary because there's another person in the shop? Just asking, not judging! 05:23 what happened to your finger? It looks like a power tool injury :-(

[@j-woodworking9573]

Saw dust. None there. I'll be more careful.

[@ozodari6160]

Wood dust gets in your nose and lungs and will kill you if you do it too often for a long time

[@gidesp1]

Superbe

[@ericlipps7152]

Great way to get away from those bulky space wasting dovetail jigs.

[@walter2066]

😮👍👍👍

[@arzya13]

Что-то много танцев с бубном🤔

[@АлексейМахновец]

Красиво, но слооожнннааааааа)))

[@Igor-qn9ib]

Если поймете... ))

[@i-N0body]

Ну любит человек сложности...

[@alanwilliamson2259]

Mostly I follow these vids. This one completely lost me... I'll stick to doing them by hand

[@j-woodworking9573]

A little more think about it. After understanding, it is much easier to cut.

[@brianfong5711]

4:29 females and males not femails and mails

[@j-woodworking9573]

Thanks. Forgive me. Not my mother tongue.

[@brianfong5711]

@@j-woodworking9573 tongue, not toung That is okay, Korean is not my mother tongue either. Thanks for the videos.

[@eyupselcuk5463]

Hiç bir şey anlamadım

[@luishermidas2801]

Que locura , 🤬

[@Алекс-л8ю]

Хера ли с таким оборудованием не работать.

[@j-woodworking9573]

??

[@jacksyberia3884]

Да уж.!!!!

[@김소현-d5w]

No

[@peterchessell28]

Bit gappy but a quicker than by hand.