I have watched a few of your videos and you are very talented. I used to watch The New Yankee Workshop. Sadly, the host Norm Abrams has retired. I do wood working in my spare time. After I retire from my career as a Mechanical Design Engineer I want to devote more time to this. I may try and teach my grandson the art of wood working. Thank you for making these videos and I hope you have many more years of enjoyment of this. Good luck.
@j-woodworking95733 жыл бұрын
Thanks for your long and kind comment sir. I used to work as an aircraft engineer. And this is not my major job. But I love to woodwork and make videos. Thanks and good luck.
@Zephura5 жыл бұрын
Nice work. Through this kind of work (and other you've made) we can see the benefits of all the jigs you present. Thanks from France👍
@j-woodworking95735 жыл бұрын
Thanks too.
@raymondpontremoli24894 жыл бұрын
By the way.....Gorgeous shop....Im green with envy.....If .Only to have a shop like this....!!!!!
@williambolio77234 жыл бұрын
Your videos are both informative and relaxing. They also inspire me to declutter my shop and greatly reduce my tool inventory. Thank you
@__lukas__84264 жыл бұрын
hola señor, tengo una duda con el disco de corte es doble ? es original o usted lo puso doble
@jaimeacevedo78745 жыл бұрын
Exceptional art. Beautiful art and skills. Thanks for showing us that beauty.
@j-woodworking95735 жыл бұрын
Exceptionally thanks.
@김종완-e6m3 жыл бұрын
이런 민족적 혼을 이어가는 님이 존경스럽습니다. 아름답습니다. 님의 손길도 곱고 나무 결이 살아있는 문도 아름답습니다. 👏
@j-woodworking95733 жыл бұрын
전통적인 작업법에는 조금 거리가 있습니다. 감사합니다.
@danielherediaibarra5 жыл бұрын
Man, what a beautiful piece of forniture, amazing job 👏🏼👏🏼👏🏼
@j-woodworking95735 жыл бұрын
Thanks.
@breakinn4033 жыл бұрын
Beautiful piece excellent craftsmanship. Question: Why wouldn't you cut the dados 13:10 while the board was solid then just rip it into strips rather then cut the strips then tape them together then dado them?
@j-woodworking95733 жыл бұрын
You are definitely right. These days I do just as you said. And I uploaded the video which shows that. Thanks for watching sir.
@mikesluitertijd4 жыл бұрын
As usual, very clean job, beautifully and perfect executed. Thanks for sharing!
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@TV-de6ev3 жыл бұрын
멋진 영상 잘 봤습니다. 질문입니다. 뒤틀림과 꺼짐을 최소한으로 할려면 한옥 문짝을 만들 때 어떤나무를 쓰는지요?
@j-woodworking95733 жыл бұрын
주로 홍송을 사용하는 것으로 알고있습니다. 감사합니다.
@jimpike34894 жыл бұрын
Stunning, you are an artist. Thanks for sharing
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@TheLena5th4 жыл бұрын
dear so much beautiful ... really inspired. thanks for the video ...
@j-woodworking95734 жыл бұрын
Thanks for watching sir
@wonkyunchoi73893 жыл бұрын
전통적인 방법은아니지만 연구하는모습이 좋아보임니다 그런데 톱질이좀
@j-woodworking95733 жыл бұрын
예. 많이 서툽니다. 감사합니다.
@gaspardmiki13695 жыл бұрын
Magnifique réalisation. Bravo.
@정인철-t4e3 жыл бұрын
유익한 영상 잘 보고 있읍니다. 그런데 판다보 끼우기위해 홈파는 기구 이름이 무엇인지요
@j-woodworking95733 жыл бұрын
사각 홈파는 기계는 각끌기(mortiser)라 합니다. 감사합니다.
@TyCrawford3 жыл бұрын
WHOA. What is that chisel-press tool you used to make those notches in the frames? Ive never seen anything like it before
@j-woodworking95733 жыл бұрын
That's a mortiser. Thanks for watching sir.
@SupiaSerenity5 жыл бұрын
와 감탄이 절로납니다. 한옥은 저의 마지막로망입니다. 아직 출발도안한 왕초보지만 꼭 도전하고싶습니다^^♡ 선생님 테이블 너무 좋아보여요
@j-woodworking95734 жыл бұрын
누구나 할 수 있습니다. 시도하는 사람이 먼저 이룹니다. 원하는 꿈 꼭 이루시길 빌어봅니다. 감사합니다.
@산화그래핀5 жыл бұрын
손이 엄청많이 가네요 언젠가는 한번 만들어보고 싶네요 저같은 초보자는 몇일 걸려도 못만들지 싶습니다 ㅜ 짜맞춤은 더욱 엄두도 못내고요ㅜ
@j-woodworking95735 жыл бұрын
저도 초보 때 같은 생각이었습니다 지금도 어렵고요 하지만 한걸음 한걸음 걷다 뒤돌아보니 출발선이 저 뒤에 있더군요 시도가 결과를 만듭니다 화이팅
@user-dino68522 жыл бұрын
안녕하세요 혹시 창살너비랑 나무두께가 어떻게되는지 여쭤봐도 될까요? 항상 영상 잘보고있습니다~
@j-woodworking95732 жыл бұрын
창살 12x22mm 테두리 40x70mm 상황에 따라 바뀝니다
@진실의방으로-k3o4 жыл бұрын
한옥의 아름다움이라는 말이 괜히 나온 말은 아닌거 같네요.. 그리고 보니 옛 선조들은 지금처럼 기계의 도움 없이 손으로 저런작업을 했다는게 참..대단한거 같습니다 여건이 충족되면 저 역시도 한옥집에서 살고 싶네요.....
@j-woodworking95734 жыл бұрын
선생님의 꿈이 이루어지길 기원합니다. 감사합니다.
@조성일-f1x Жыл бұрын
어젠가 방송에서 본적이 있는데 문짝을 좌우로 밀고 다시 문짝을 문지방 레일에서 살짝 들어 벽쪽으로 붙이니 공간이 문짝으로 제한되는 공간이 완전히 넓어지는 기능을 본적이 있는데 결론하면 문짝이 문지방에 걸려 있는것이 아니라 미닫이에서 여닫이 기능까지 하려면 한옥 문짝을 제작하는 곳에 찾아가 어떡게 설명해야 하는지 아시분 분 관련 영상이나 사진 제작소 알려주시면 감사하겠습니다.
@dekayscrafts5 жыл бұрын
멋진 작품입니다~ 잘 봤습니다~
@j-woodworking95735 жыл бұрын
빠르게 성장하시는 분. 반갑습니다. 부러워서 자주 님의 소식 확인합니다.
@albinototo4 жыл бұрын
Sir, every time I see you make a perfect art, and your fixtures work great, thanks for share your work with us, and techinique, Maybe sound goofy, but I like many of your things, and I look if you have a set of plans, for your work, if yes, how we can get a copy ? Congratulations !!
@360S0DJefferson4 жыл бұрын
Are the chisels and plans you're using a Japanese style? If yes, what brands do you use? I love the quality of your work making these projects that are very handy in the home. I watch a lot of Korean tv shows based in ancient times and I much enjoy the beauty and practicality of the furniture.
@j-woodworking95734 жыл бұрын
No, sir. Those are Korean style and product. Thanks for your interest in Korean culture.
@360S0DJefferson4 жыл бұрын
@@j-woodworking9573 Would you be kind enough to provide links to the Korean chisels and planes? I would like to get some along those lines.
@Vincent_de_Paul Жыл бұрын
@@j-woodworking9573 끌이 일본산이냐고 물어본건뎅
@dleivam5 жыл бұрын
Wow.. Amazing.. Congratulations for that beautiful job.
@jeakim41523 жыл бұрын
나무에 구멍을 뚫어 조립 항시에는 풀 ( glue )을 발러서 까워야만 튼튼 할것 같은데 ? 어떻게 생각 하시는지요 ?
@j-woodworking95733 жыл бұрын
맞습니다. 저도 항상 접착제를 사용하고 있습니다. 감사합니다.
@juanfranciscolizaolagonzle91664 жыл бұрын
Amazing Work!!! Congratulations!
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@MrGeroth5 жыл бұрын
Fantastic workmanship. Thanks for sharing
@j-woodworking95735 жыл бұрын
Thanks. I'm pleased you are satisfied.
@김비비-r5v4 жыл бұрын
*********************** 멋진 장인의 솜씨를 볼떄 정말 인간은 신이 창조했다는 말이 맞는듯 ********************
@boltup55665 жыл бұрын
Beautiful. Im excited to see it finished and installed.
@j-woodworking95735 жыл бұрын
Not finished. You will see something unexpected. Guess what. See you then. Thanks.
@stephenkim74955 жыл бұрын
처음엔 배철수씨인가하고 봤습니다 ^^ 그리고... 언제나 작업을 쉽게하기 위해 아이디어를 만들어 내시는 모습에 감탄하게 됩니다. 이번 영상은 특히 멋집니다!! 외국분들도 한국 창살의 아름다움에 좋아들 하시는 것 같아서 뿌듯하기까지 합니다. 건강하세요 ^^
@j-woodworking95735 жыл бұрын
배철수 씨라 많이들 합니다 시청하시는 분들에게 도움이 되고자 나름 고민을 많이 합니다 알아주는 분들이 있어 항상 고맙게 생각합니다
@jamesrichardson69013 жыл бұрын
Love the look would love to put it in a home
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@Kingelvis1975Eruditus4 жыл бұрын
Amazing wood working Maestro! I have been researching woodworking techniques and your are top grade! Your technique make me wonder and I will research techniques by country and times period.
@j-woodworking95734 жыл бұрын
Thanks for watching and kind comment sir.
@michaelgrude37855 жыл бұрын
Great work. Thanks for showing 👍
@j-woodworking95735 жыл бұрын
Thanks.
@xcnpeanutx5 жыл бұрын
A wonderful door. I like it very much. Can you tell me, what sort of wood you use for this? Go on and make some more videos! Greetings from Germany!
@j-woodworking95735 жыл бұрын
Pleaseed to see you. That's made of red red pine tree. Thanks.
@xinixxagnix2014 жыл бұрын
Best woodworker of youtube, amazing stuff!!! (Thank you)
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@wagnerpereira95363 жыл бұрын
Linda porta parabéns. 아름다운 문 축하합니다
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@joaoosenir79274 жыл бұрын
Ficou muito bem feito. Parabéns.
@frittandy5 жыл бұрын
Very good. Congratulations.
@nathansilver91905 жыл бұрын
Very nice my friend, it gives me an idea for a door I'm going to build.
@j-woodworking95735 жыл бұрын
I'm happy that there's someone who is encouraged by my work. Thanks.
@dahljerald29344 жыл бұрын
I stand corrected. Your joinery is excellent. Accept my apology for my earlier comment.
@j-woodworking95734 жыл бұрын
Don't mention it. I'm happy to meet you again. Thanks for watching sir.
@AtticusDraco5 жыл бұрын
That is really nice You're very deliberate & precise in your woodworking :) Q: The reason for the use of folded newspaper with your table-saw panel cuts?
@j-woodworking95735 жыл бұрын
Good question. That's for preventing the faces from being scratched.
@raymondpontremoli24894 жыл бұрын
When using a mortise machine always try to have wood on all four sides of the bit when plunging....It keeps the mortise bit from wandering. I used to cut the mortises in line like you do and then I was shown to do it the other way. It works much better
@j-woodworking95734 жыл бұрын
Thanks for your kind advice. I`ll try to do that.
@raymondpontremoli24894 жыл бұрын
Love that latice work..
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@manuelbustos37764 жыл бұрын
Thanks for sharing
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@전석진-g8z3 жыл бұрын
전통목공에 관심이 많아서 선생님의 목공제작하시는 영상 잘 보고 있습니다. 1분 58초 부분에 사용하시는 공구 이름을 알고 싶습니다. 저는 톱으로 일일이 잘랐는데 편해해 보입니다 ^^;
@j-woodworking95733 жыл бұрын
트리머라 합니다. 감사합니다.
@전석진-g8z3 жыл бұрын
@@j-woodworking9573 좋은 정보 감사합니다. 혹시 괜찮은 제품이 있으면 추천 부탁드립니다 ~^^;
@j-woodworking95733 жыл бұрын
비싸지 않고, 기능도 간단합니다. 너무 고민하지 마시고 골라 사면 됩니다.
@전석진-g8z3 жыл бұрын
@@j-woodworking9573 고맙습니다. 트리머로 라운드만 매끄럽게 만드는 줄 알았습니다. 손생님 덕분에 새 용도를 발견했습니다 ~^^
@ABK-anmi5 жыл бұрын
안녕하세요~ 영상 너무 잘 보고 인사드립니다. 선생님! 저와 같은 테이블쏘를 쓰시는거 같은데요. 제로인서트는 직접 만드신건가요? 작업분위기나 작품의 상태가 너무 너무 깔끔하고 깨끗합니다. 제가 다 기분이 좋아집니다. 같은 브랜드 테이블쏘를 쓰면서 인서트가 너무 불균형해서 고민 중에 선생님 영상을 보고 여쭈어 봅니다~ 작업의 숙련도 또한 배워갑니다~!!!
@j-woodworking95735 жыл бұрын
반갑습니다 또 좋은 평 해주셔서 감사드립니다 제 영상 중에 '테이블 쏘 인써트 만들기'를 보시면 도움이 될것입니다 거듭 감사듭립니다
@ABK-anmi5 жыл бұрын
@@j-woodworking9573 감사합니다! 채널에 자주 들러 배우고 겠습니다!! 항상 건강하시고 좋은 일만 있길 바라겠습니다!
@Lind_Knight3 жыл бұрын
Внутренний перфекционист начал плакать, когда часть решётки пришлось отпилить.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@ryancrowe34755 жыл бұрын
Great video! How is the door installed?
@j-woodworking95735 жыл бұрын
It is installed the same way as usual doors are installed.
@ryancrowe34755 жыл бұрын
Ok. The reason I asked was because your door seemed shorter the doors I’m used to. It looks like I would have to crawl through. 😄. I’m tall. Also the picture at the end has the door sideways. Beautiful work, sir.
@thaitichi4 жыл бұрын
How do you finish something like this?
@j-woodworking95734 жыл бұрын
I put the orange and lemon oil on it. Thanks for watching sir.
@lolwazeid4 жыл бұрын
good job
@j-woodworking95734 жыл бұрын
Thanks sir.
@해바라기텐텐4 жыл бұрын
혹시 거북창 문살 만들수 있나요 연꽃문살 제게 목공일 가르쳤던 그분은 만들지 못하는 문살없이 다 만들는 것을 옆에서 봐네요 님도 잘 만드는거 같아서 물어 보네요 통도아도 만들고 해서요
@j-woodworking95734 жыл бұрын
누군가가 만드는 걸 볼 수 있다면 가능할텐데. 지금은 만들지 못합니다.
@geovannyfernandez58164 жыл бұрын
Genius
@TopBuildKorea5 жыл бұрын
작품에 심혈을 기울이시는 모습이 보기 좋습니다. 저도 영상을 만드는 데 항상 심혈을 기울이려고 노력합니다. 제 영상은 어떤가요?^^
@j-woodworking95735 жыл бұрын
그래픽 처리 좋고 열심이십니다. 영상 촬영시 선생님의 작업시선이 아니라 카메라에게 보여준다는 마음으로 상황과 작업방식을 설정하고 진행하세요. 영상은 시청자가 보고 이해하기 쉽게 찍혀야 합니다. 죄송합니다. 주제넘게ᆢ
@TopBuildKorea5 жыл бұрын
@@j-woodworking9573 답변 주셔서 감사합니다. 앞으로 영상 찍을때 참고하도록 하겠습니다. 많은 도움이 되었습니다
@boticron5 жыл бұрын
Are the gaps in the joints deliberate?
@j-woodworking95735 жыл бұрын
No, I didn't intend to do so. That's because I'm not a good carpenter. I always try to do my best. But l often make mistakes. Sorry. I'll be a good carpenter tomorrow as you expect Thanks.
@JohnColgan.4 жыл бұрын
Sometimes the gaps can be highlighted/bevelled to enhance the joints. Don't be put off by critics. The whole project looks great
@j-woodworking95734 жыл бұрын
Thanks sir.
@boticron4 жыл бұрын
I wasn't criticizing the man it was a question.
@clausthaler20035 жыл бұрын
Klasse Arbeit gefällt mir sehr gut
@dinobaggio1504 жыл бұрын
fantastic
@j-woodworking95734 жыл бұрын
Thanks for watching sir.
@BTom165 жыл бұрын
Impressive.
@j-woodworking95735 жыл бұрын
Thanks.
@Ryu-moksu5 жыл бұрын
많이배워갑니다
@j-woodworking95735 жыл бұрын
열심히 하시는 분이군요 조만간 꿈을 이루실것 같습니다 행운을 빌께요
@magdielramirezvinagre91365 жыл бұрын
Exelent uuuff
@우클-q4f5 жыл бұрын
잘봤습니다^^
@해바라기텐텐4 жыл бұрын
막구멍을 내면 계산하기는 편하겠네요
@해바라기텐텐4 жыл бұрын
문짝 다대에 막구멍을 내셔네요 제가 일 배울때 막구멍을 내지 않고 뒤에 10정도 남기고 구미를 했는거 같은데
@j-woodworking95734 жыл бұрын
선생님이 쓰시는 용어를 이해할 수 없는 아웃사이더입니다. 제가 생각하는대로 만들었습니다. 감사합니다.
@incoop-tv27605 жыл бұрын
전에는 제가 다소 무시를 했는데 영상을 보니 상당히 섬세합니다 미안합니다 제가 생각이 부족했습니다
@j-woodworking95735 жыл бұрын
제가 많이 부족합니다 좋게 봐주셔서 더욱 고맙고요 혼자 배운 목공이라 더욱 어렵습니다 감사합니다
@GNU_Linux_for_good3 жыл бұрын
15:10 Hmm.. although that table saw's top hardly could be any flatter, an additional assembly table seems to be not the worst of all ideas. Right, chief? After all: that's a *hell* of a dado-technique.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@iceman86982 жыл бұрын
А как потом это покрасить?
@j-woodworking95732 жыл бұрын
I put orange oil on it with brush and spray gun. Thanks for watching sir.
@incoop-tv27605 жыл бұрын
뷰티플~~
@Erok80192 жыл бұрын
Music too loud and unnecessary
@pishongroup5 жыл бұрын
안녕하세요. 어제 다른 영상(수건함 만들기)에서 답변을 잘 들었습니다. 사실은 저가 한국을 떠난지 30년이 넘는지라 어려운 단어들을 잘 몰라서요. (연목, 경목 그런거... 그냥 soft wood, hard wood 이런 게 더 익숙해진 세월이 되어 버렸네요) 작년에 은퇴를 하고 시골로 이사를 했는데 가구를 직접 만들어 보려고 해서 이런 저런 영상들을 많이 보고 있습니다. 응접실을 퓨전 한국식으로 꾸미고 싶어서 이 영상은 거의 매일 보고 있습니다. 이 자재도 미송을 사용하신건지요? 미송이라면 나중에 혹시 뒤틀리지 않을까 싶네요. 답변 부탁드립니다.
@j-woodworking95735 жыл бұрын
원래 홍송red fine으로 작업을 합니다 변형이 거의 없습니다 이 영상에서는 사정이 있어 전나무(더글라스)로 작업했습니다 문을 제작할 수 있으면 거의 모든 작업이 가능합니다 한 번 시도해보세요
@pishongroup5 жыл бұрын
@@j-woodworking9573 감사합니다.
@stevedarnell84445 жыл бұрын
Who picked out the music.
@j-woodworking95735 жыл бұрын
Me at youtube free music
@nickyork89015 жыл бұрын
While I like the video in general, the cut at 10:09 is a very dangerous way to use a tablesaw rip fence.
@j-woodworking95735 жыл бұрын
Sorry. I'll be careful.
@randy-yk1yk4 жыл бұрын
What was particularly dangerous about that cut? Are you talking about the angle on the bade? It was on open cut so there was minimal chance of binding and just the normal risk of kick back. I see nothing to get excited about.
@nickyork89014 жыл бұрын
@@randy-yk1yk Thanks for the reply and the question. The angle of the blade is not the issue I had in mind. Here was my thinking, whether it is correct or not. The shortest side of the workpiece is up against the fence, and at the same time the cut is a long way from the fence, so there is a lot of leverage and high chance of rotating the workpiece as you push it through. That would lead to kickback. Having said that, using the mitre fence and the rip fence simultaneously is an interesting attempt to mitigate that risk. As far as I am aware it is completely the wrong technique as now the workpiece is jammed on 3 sides if there is any binding. Just using the mitre fence would be much better actually. I suppose if it is a manmade material it is not too dangerous as there would not be any binding. What do you think? If i have got this wrong I'll be happy to edit the comment.