J2534 Flash Programming Class Part 4: Which J2534 device should I buy?

[@amundsen575]

Power supply that I use is a meanwell LRS-350 30A 12v has a 3 year warranty cost about $35.00, 150mv ripple, excellent quality. For more power I use an RV converter inteli- power 60a . these are all switchmode ps and can be adjusted , just add some battery clips, I got some 10gauge silicone wire that the RC guys use for the cable-nice and flexible.

[@Jpilgrim30]

I use that power supply but I added a voltage meter with a shunt to read up to 100 amp of current as well. I love seeing the current draw as well as voltage to get a good idea of the state of the batteries charge.

[@L1Training]

Perfectly explained! Great Idea!

[@amundsen575]

I have a volt meter cut into mine, Amp meter would be nice , let me add that to the list!

[@sinegra30]

I use the unit J2534 that comes with the Autel Elite, Works great!

[@awudubannaf8608]

Argeny Sandoval

[@MarioHernandez-bn6pm]

For what kind of programming do you use it for

[@JamesValentineBaja1000]

Not really

[@MarioHernandez-bn6pm]

@@JamesValentineBaja1000 how come

[@JamesValentineBaja1000]

@@MarioHernandez-bn6pm because it's not OEM approved. GDS has A lot of problems with them.

[@RicoCantrell]

Just now coming across this. Great info brother.

[@NewLevelAuto]

Missed it yet again . No notifications till now .

[@markcasillas2166]

Thanks a lot sir learned absolutely nothing about why I clicked on your Video

[@L1Training]

I will process your refund promptly.

[@amirouw]

Hey man cool . Iwatched it .

[@mikerenaud1846]

Hello from Nova Scotia

[@ricardoacuna1757]

I'm cool with your video

[@ricardoacuna1757]

SEGUIN Texas

[@raptorpromechanics1911]

Hi Keith. Just found your channel. I’ve been digging up as much as I can find on reflashing and ended up here. Looks like great content. Would love to get ahold of this class. I see I probably missed the boat for patreon but if there is somewhere you are offering this class for purchase I would be interested. Thanks. Keep up the good work. Steve.

[@L1Training]

I now house all of the content at L1Training.com

[@raptorpromechanics1911]

L1 Automotive Diagnostics and Programming LLC yes thanks. I actually ended up finding it after I watched a few of your more recent videos describing that. I purchased your class today there. Thanks very much.

[@raptorpromechanics1911]

Also, I was watching your bit about the different J2534 devices and you listed AutoEnginuity as an other device. I spoke with them a few weeks ago and their current device is a cardaq unit as depicted in the current picture on their website. Just an FYI.

[@BMWPROGRAMMINGJAMAICA]

This device not good enuff for BMW vehicle and the ISTAD software, it failed to delete fault code via Terminal change KL15 off) not detected through this Snapon J2534 pasthru pro4. It also failed ISTA icom interface connection sequence.

[@jok3yjesu339]

Do you have any opinions on a cheap j2534 adapter like $125 I seen one for that much and all I need it for is it for Fords fjds tool to reprogram my 2000 ford ranger

[@v4vauxhall498]

Get yourself a Guinness surger. luv the stuff. nice vid man

[@DavidGutierrez-zi4dy]

thanks

[@dlateshow]

What scan tool/j2345 do you recommend for programming modules/ecm/keys for Acura/Audi? For best bang for your buck?

[@MikeBrown-hd3bt]

im608 comes with both as a combo best deal, but when ur getting into diag or keys ur all in and still might have to buy more devices as i ordered my second key programmer to save me when the autel cant do it , which is rare but some vehicles has happend to me .... plus technology sucks and keeps changing so buy the latest tool if possible so u dont got to upgrade right away

[@stevenjr.7467]

I have to clone an ecu on a 2008 Audi A4 Quattro 3.2 I was looking at the J2534 willl that do it and do I need any programs or a computer to do it

[@L1Training]

There are very few J2534 softwares that clone

[@mikekhazma7698]

can you program used ecm module with j2534

[@viridian6903]

Hello does the vcm 2 can be used for gm flashing ecu

[@truth4reel]

Hopefully the class isn't like this 32mn video with less than 5 min info

[@marktirabassi7160]

What do u think on the ancellds 600 . Dosent it do all the stuff your talking about?

[@L1Training]

No

[@AbstractSurrealist]

hello

[@ashylarry1442]

I work for Drew Technologies

[@CBRRR-eh3ky]

Can you suggest anything better than Cardaq?

[@ashylarry1442]

@@CBRRR-eh3ky Idk how you can get much better than a CarDAQ. The CarDAQ Plus 3's are awesome! You can go with a CarDAQ-M as well to add on any Pass Thru attachments for future proofing.

[@DDrew67]

Must be nice...

[@robinsonsmotorcycleandauto3929]

Crap sorry missed it Live had to get cleaned up

[@wisetow10]

How does your Patreon work? I’ve never used it. I’m interested.

[@L1Training]

All the content has been added to L1Training.com and the patreon is no longer active.

[@ahmedelrashidy2416]

I am looking for original software for Honda , Toyota and BMW

[@L1Training]

Yep, we cover those in class except for BMW, our BMW class is almost done.

[@tiredofthelies303]

For a diy guy what’s the cheapest j2534 unit that is Chrysler compatible?

[@L1Training]

www.controllertech.com/products/pulsar

[@DRHVACR]

What's your DM info need your help

[@smms1276]

👍 👍

[@jerryzdeb9250]

Stick to the subject. Lots of words nothing said.

[@javaidmalik1]

You don't mention the one is best than all of this is DGtech CSI 2534

[@L1Training]

I disagree, but there are many units I did not mention

[@hvtvalencia36]

Buen vídeo, muy nutritivo, gracias

[@taboracho621]

Estos videos solo se miran no se tragan buey

[@thelifescout8335]

To bad ease sold out to DENSO

[@estebanamador7601]

Why ?

[@marktirabassi7160]

Drink beer

[@C8Kid]

Bull shtttt

[@L1Training]

lol, ok