I ATTEMPTED TO FIX MY BROKEN PEUGEOT 208 GTI

[@amphetamineblue4172]

Good call on avoiding the modifying in the series. It never actually adds any more value than it costs and limits the people who may want it.

[@20vTurbae]

It's actual mad how far you've come man the quality of your videos nowadays are honestly unreal compared to the past

[@c111prs]

Your not wrong but he’s had a good bit of practice :) the quality prob just comes naturally now

[@JesseCollingham]

Appreciate it fellas 🫡

[@scoobysean555]

I'm proud and im not even his dad 😅

[@leccy9901]

When you take connectors apart, use electrical tape and draw, for example, a star on each end or a pound sign. Then, when you connect them all back up, star to star, pound to pound and so on. Never confused then. I do this with eveb the most simple stuff because it's easy to get wrong and can go really bad really fast if it is wrong.

[@PandaMobileMechanic]

most times with pipes with clips, you put the clip on the pipe before and when you push the pipe in, it clicks in place and so you don't have to struggle to put the clip in afterwards

[@willsimm6695]

THIS

[@GravityContentCreator]

Not this style mate

[@DufferSeller]

When u get to 100k u need to celebrate and turbo ur civic!!!!!!!

[@maverick4220]

I 2nd this

[@cozifpv2069]

I 3rd this

[@Matt7.5_R]

I 4th this

[@Active.mk27]

I 5th this

[@jasper3243]

6th this

[@stephen8468]

Jesse when’s the next upload?

[@turtles1754]

Why do people comment negative stuff on here. Critique is fine but pointless bitchy nonesense says a lot about you. This lad has the balls to push for his dream, and whether he makes it or not is irrelevant. He's achieved more than most of you already who are still sat on your arses doing nothing.

[@welephant2013]

Exactly. I remember whe. He had to wait 2 days for lee lock wood to come fit something to his car. Now look where he is. Can only be jealousy that brings the snide comments.

[@lukesmall3197]

It's actually mental. Some how came across his videos but absolutely loving them. Also saw a personal question in the last video...why? I don't get it.

[@radarkhan5939]

whens part 13 landing bro been a while now everything good ?

[@henryigjones]

Get yourself a bag of extra long zip ties. That wiring loom could have been tied up out the way. Also, lubricate any seals with fresh fluid engine oil for rocker cover gasket and coolant for the thermostat. And it's always worth picking up a torque wrench and searching up torque specs for things that have gaskets, Google 99% of the time will bring up a forum or diagram that will include the correct torque specification. As well as torque specs the pattern you tighten up the bolts in matters. I may be telling you things you already know but just some good general knowledge to bear in mind.

[@Baileyhowcroft01]

When next video bro come on I’m getting withdrawal symptoms

[@Superzesh101]

Quality video mate, I started following after Calvin released his video with you and I'm glad I did! There are so many haters on here, I don't know how you cope. But 99.9999% of the people love ya mate, so keep going! 😅

[@declanedwards1827]

Done this job on cooper s, same engine, pig of a job but recommended to replace that pipe that goes the water pump so don’t have to put that clip on in situ, also rear pipe is plastic and prone to cracking, lots of them in cooper s and gti that are low mileage as don’t make it to high mileage unless had lots of timing chains and more done, prone to oil consumption due to poor ring design and coking up

[@joshmerrick4716]

Nice work Jesse! I agree with you about not modifying these cars as you go. Just fix them and swap them on. Some fresh £150-£150,000 plates and send it on its way. Keep up the good work

[@topgear931]

Loving this series man, seriously good videos! Keep it up Jesse, you’ve come such a long way. Hard work is paying off

[@turbomonkey840]

Jesse lad,no need for the click bait thumbnail. You know you’re going to get views. People love the vids 👌 but hate the click bate shit.

[@JesseCollingham]

@@turbomonkey840 clickbait? Everyone on part 11 commented telling me I made a mistake getting this car?

[@Icebuntrucker]

Glad im not the only one that finds it annoying.

[@marcuswoodgate4026]

@@JesseCollingham ignore what people say. The car is worth more than the others, you’ve fixed it. You definitely didn’t make a mistake. You in for a good turn.

[@davidclarke918]

​@@JesseCollinghamNot everyone 🤷 , some people really like the car , it's actually a ' Jesse type car ' to keep , but I get why you wouldn't

[@BOSKILLZX]

Loooooool kick rocks man, it’s KZbin. It’s far from as clickbaity as other videos. Do you want him to just put a black screen 😂😂

[@marksenior9220]

This trade up series is great. You have a willingness to learn and show bags of enthusiasm. Keep up the good work.

[@RichardOrr1977]

colour tipped pens to mark sensors and maybe top up with water case ther a coolant leak ..good job all the same jesse

[@joem8213]

Smashing it Jesse 👌 others are just moaning as they don't like Peugeot but its not about liking each car, its about swapping for something more valuable

[@Bucharestguidedtours]

Great video in this series, shows what its like for the driveway mechanic very well. As you say 76 pounds well spent, with hours and hours of work to complete the job. Its turned out well , nice modern car for someone in good condition. Best wishes from a long time viewer.

[@JesseCollingham]

Legend man! Appreciate that!

[@paulhewett6483]

Done a few of them thermostats easier to take the scuttle panel out to get down the back of the engine

[@OliverReilly1]

Whoever is watching this that hasn't subscribed yet, come on guys, just click that button! It costs you nothing. This lad is grafting his arse off on his driveway and that's all he is asking for to produce these videos for us

[@JesseCollingham]

Legend man!

[@ethanbarton1590]

This channel needs to hit 100k by end of this year

[@SIMONHOLFORD]

Re the battery being in the way to observe for leaks. What you can do is put the battery on the driveway and run a set of jump leads to the cables in the engine bay. Had to do this to adjust the idle air screw on my 300zx because Nissan decided best place for it is obstructed by the battery.

[@TheDavedadd]

Belting series this Jesse. Fair play to you for building up the confidence to tackle this stuff and on the driveway of all places. Could do with a unit tbf. I wish i had the confidence to do this. Keep up the good work buddy. 🙂

[@markwheatley5191]

Me and my son spent many frustrating hours working on a 207 with a EP3. That hard pipe connection is nonsense. Had to take 17 parts off to change oil filter housing gasket. We did the chain and everything. We always put some sealant on 3 places on the rocker cover gasket as per Haynes. Loving your content and your mission. Subbed😎

[@AndrewDuncan-f5p]

good job your doing well keep going your subs will rise also yes modifying your stepping stones only makes sense if you aim at a certain market its best to build to manufacturing spec to attract all potential swaps

[@dawsonfogle4167]

People might hate on the E350 to 208 but it is the most logical choice to get to the end goal. Much love from the US, keep it up!

[@JesseCollingham]

Thank you bro!

[@BOSKILLZX]

This series might go down as a car KZbin classic. Elite content 😭

[@da-mazing8500]

Well done for producing such good content and positive attitude, keep up the format and content. Your quickly becoming one of my favourite channels. Good luck 🤞

[@JesseCollingham]

Much appreciated!

[@nicandroiannotta7905]

The clip goes on first shroud befor you fit the thermostat. then you just push the hose in and it snaps in place

[@leccy9901]

I watched your videos 5 or so years ago. They started to get a bit stale, and i left. But this series is good, you have more knowledge (not hard, you knew as much as my mrs 😂) definitely a good channel again now. Good lad 👍 hope you keep this level of content going.

[@MikeSlater226]

I got an email for planet of dreams as I got the notification about this video 🤣🤣 good old Peugeot with the brilliant sensor locations 🙄

[@Shay.827]

Well done . Really impressed. those fiddly jobs are a nightmare . Looks like the paint needs a bit of love. Maybe another video of deep clean+polishing and vax. Then you will have another video and probably you will not spend any money because as a car guy im sure you have all the necessary products and tools to do it. Keep on going mate your videos are a pleasure to watch.

[@abdulkuddus6540]

Great video. Take a picture of the engine bay before taking it apart and that way you can use it as reference when you put it all back together

[@scoobysean555]

Doing jobs that a garage would charge hundreds and outside on the drive....getting proper stuck in now bud you should put down hours spent after and total it up see how much the going rate for all the work you've done your smashing it bud 💪

[@Matt7.5_R]

28:50 The smiley man in the orange hi-vis approves once again as always😂

[@stuartmclaren7285]

Love this series can’t wait to see what car is next

[@leesoutheast]

Great episode as always, loving this series 🙌

[@thesilentgametestr]

Good video and nice to see a Peugeot with minor problems. It's a good job you got this 208 and didn't go for a cooper S with the same engine as the mini engine bay is smaller which would be more difficult to work on. Hopefully you swap it for something easier to work on.

[@scottcallis3491]

Nice too see ya tag teaming with ya dad mate.

[@SCOTLAND.1188]

YES JESSE

[@colinhutchinson5282]

Surely the temp sensor wiring had a connector behind the door card ?

[@Bit10x]

Really liking his series. Thank you 🙏🏼

[@SCOTLAND.1188]

Jesse! What have ya done!..😮😮

[@novicetheaf]

Great stuff Jesse 👌, just in time for dinner 🍽️🙂. Hope you get to 100k soon you're on fire at the moment man well done 💪

[@adeykitch1819]

Been watching your channel for years mate, great skills and hard work, all the best to you .

[@lukesmall3197]

Learning absolutely loads by these videos. Whats your opinion on wind deflectors?

[@JesseCollingham]

Cheers man! And I like them on certain cars Audi/vw I like them but anything Japanese I don’t think they suit 😅

[@gazking08mx]

Should of gone with a genuine rocker gasket. 20 years of working on cars and non genuine never seal properly. Worth the extra few quid for certain parts. Good going though doing well on this swapping up tona super car. I hope you get there soon ❤

[@TheTechnoaddict]

20 years of working on cars and never had a problem with aftermarket gaskets.

[@Sportage5603]

Just use a decent brand like febi or elring and theyre fine. Cheapo eBay china ones fail

[@gazking08mx]

@TheTechnoaddict you've just never had one returned. Noway inn20 years not one had leaked 😂

[@TheTechnoaddict]

@@gazking08mx nope, not one were the gasket was the cause. Look for decent brands. Most of the time they manufacture the oem parts for brands 2. And if u get one where u doubt the quality, just return it and get another one.

[@andrewdgregson]

Long time lurker now subbed. Your content is much better. 👍

[@JesseCollingham]

Much appreciated!

[@jg5567]

in future put the clip in first then you can push the pipe through the clip the end of the pipe is coned so you can slide it past the clip

[@djsiuk]

Great video and outcome on the GTi. You can pressure test and then afterwards fill coolant by vacuum. The kits are inexpensive. Make sure all the coolant is washed out of the engine bay as it’s not good. Mmm we wonder what’s coming next.

[@johna8872]

im new to your channel, but i must say, im glad i found it, thank you broski!

[@Horizon.carcare]

Just taking a guess but have you taken inspiration from a certain mat Armstrong with your video formats the voiceovers and damaged cars etc? If so then well done because there nothing wrong with learning from others

[@JesseCollingham]

Think he inspires most Uk KZbinrs so defo!

[@Horizon.carcare]

@@JesseCollingham he’s flying and it shows with hard work what you can do keep up the work Jesse and 100k will come to you well done mate

[@akimtroksa5359]

In terms of modifications i think you should treat it to a very good valeting and bring the bodywork up to shape with some polish , wouldnt hurt 🤷

[@olakitanbusayo4453]

Amazing work 😍

[@matthias12345654321]

Quality of the vids is great

[@shaunfalcus8840]

Some one needs to buy this man a Gazebo! Great video once again, have been following along for a while now!

[@JesseCollingham]

Ordering 2 soon

[@shaunfalcus8840]

@@JesseCollingham I got one from 24mx a year or so ago! Really recommend for the money 👍

[@ashleydavies7313]

He had one when he wrapped the corsa

[@mazramm3266]

Been watching your videos for a little while now, loving the content. Keep it up!!

[@adamclifton1987]

Jesse, keep doing your thing lad, guarantee within a year you'll have a unit local to you for videos for you and the Mrs to progress to the level you aim for on a weekly basis....also get ya Dad and the Mrs involved in projects....works for others in the game and I think you'll have a right laugh along the way....much respect 🙏 👍 😉 ❤

[@MrSluby]

Love that you listens to the comments about mods Jesse, you’ve come far from a few years ago with the content. Genuinely mad how good this series is

[@saikoshizzle]

About the loom, you can use something like a broomstick and a strap. This way you can easily lift the loom

[@anonymouscyclist1233]

With swaps and trades you are probably going to be bouncing between older more depreciated expensive cars and newer lower mileage more economical cars, that and more broken cars. Good series for decent content.

[@Jayryder25]

Should sell them and buy gonna be impossible to keep trading them 🙈

[@amphetamineblue4172]

@@Jayryder25 Yep, if he gets up to cars worth £20K or more no older owners are going to be swapping them. He'll never get to a supercar sadly

[@Jayryder25]

@@amphetamineblue4172 exactly it’s a certain type of person and a certain type of car that goes up for swaps 99.9% of people wouldn’t go down that route so gonna be very hard enjoying the series tho he’s smashing it

[@amphetamineblue4172]

@@Jayryder25 It will be good to see how far he can get doing it. May still end up with a nice performance car

[@hbguitar]

Nice work mate - keep it going

[@XVDBENZINOVX]

You seem to know you are doing keep it up bro! I’m looking forward to see what car you’ll get next after fixing this one up!

[@darrenlennox2313]

What diagnostic tool do you use mate

[@AndrewWilkinson-m7j]

Not ever worked on one of these but with the awkward pipe on the thermostat. Could you not have connected that hose first then fully installed the thermostat after that?

[@guy4469]

when you reach 100,000 subscribers you get £100,000 of youtube well done i love this channel.

[@Bestizgamingyt]

Absolutely love the content keep going mate your gonna get the super car 🔥😎

[@AndrewWilkinson-m7j]

How good does it feel when you fix something and everything works fine. Best part of messing with cars

[@borntosoar1145]

keep it up mate proper loving the content :)

[@westRtype]

Great work pal 👍

[@lewischafer3333]

Another epic Content ever 👌

[@Joexcix]

Smashing it mate, banger as always 🔥

[@leewilliams9158]

Cracking video, Jesse getting better every time keep going get there in the end just keep flipping them on plenty of time for modifications haha 👍😊

[@josephstjohn3871]

I like how your keeping track of the costs now. Nice video bud hopefully you get a nice swap for it

[@fabionobre8408]

The plugs only go in one way. The tabs on the plugs are slightly different so won't plug in the wrong place

[@lukebranton139]

Get yourself a coolant pressure tester makes life easier for finding leaks and checking your repair 😊

[@xtsm_ketchupx2055]

Yeah boy ! Fast hothatch

[@DjPrimeberry]

Keep going dude!

[@clairebroughton3244]

Really enjoyed this, great to see your dad again lol ❤

[@jackdanielsamarreto]

Well done Jesse 👍👍👍

[@davidwade4594]

Hope you take any negative comments as just that buddy, i think people have a certain standard of high level YT's in their head and then you must compare of equal quality. Just do what you are doing, listen to the good advice in the comments and remember that even negative comments will add to the algorithm and therefore become positive. All the best with your venture 🎉 you are doing what you enjoy and making a few quid, fair play

[@waynelewis5656]

"working on cars on your driveway"?? You're not doing anything on my driveway Jesse ⛔😅

[@camchaz6585]

Very interested to see where you go on from this Peugeot. Loving the series by the way mate

[@sarah3136]

Flipping subscribe people, it doesn't cost you anything! This is one of the best car channels on KZbin, a lot of work goes into entertaining us 😊

[@JesseCollingham]

Thank you man!

[@haydenbarr8265]

2014 Ford Kuga titanium 2.0 tdci ?

[@watchanything-c7r]

that good news its had new timing chain at some point

[@markcrossland1021]

2:54 I watch this journey with interest ,and will continue to so long as you keep it true on your thumbnail.👍

[@l333boa]

Great content Jesse lad 👌

[@benmihai504]

great video jesse 👊🏼👊🏼👊🏼

[@mekekeli9354]

Can you give me some feedback on those sealey ratchet. Was considering this or the Milwaukee ones.

[@JesseCollingham]

Mines been amazing! Never let me down and battery lasts forever

[@gsishaun4940]

1 issue still outstanding 👀👀 battery tie down 👀🤣

[@JesseCollingham]

They actually clip in to the battery tray 😅

[@gsishaun4940]

@@JesseCollingham so cable tie was secondary tie down then 🤣. Glad to see someone actually following through so far with this trade up series though most KZbinrs end up giving it up 👌🏼

[@Daz1914]

Job well done once again mate 👏

[@ScottConroy-l9b]

Hi Jesse I have a bmw 320i business edition 2010 new tyres alloys although standard ones in good condition

[@steverae68]

Loved the comment ‘a working peugot’ lol There is no such thing haha - perfectly up to scratch - haha - get rid before it breaks again buddy Love this series - subscribed buddy

[@itiswatitis6942]

did my mini cooper s thermostat,same engine same pain in the arse.however the themostat cost 550 nz dollars. love your vids by the way.

[@NIMRODSRST]

Replace the missing wheel centre cap! 👍🏻👌🏻

[@wayned5041]

Why do all car you tubers put their hands on their heads for a thumbnail

[@scoobysean555]

Mandatory I think 😂

[@ikonuk]

It's sexual. Similar to the only fans girls thumbnails. His right hand is place to cup the balls. His left hand is on his head to make you think he's never none this before.

[@PaulLaith-ke5wu]

Ye, and then the massive mistakes they put 40psi in their tyre instead of 35psi 😂

[@JesseCollingham]

Adds emotion and expression to the thumbnails/video, if I stood there like a school photo it kind of doesn’t hit the same 😀

[@sammybaker4767]

Bell ends.

[@James-ns6jm]

YES mate!! Seeing prices for parts when fixing up the cars, thank you Jesse! Quality video as usual and to be honest your videos have come soo far from when I started watching in your Corsa VXR days. Legend! Edit - been subbed from the early days! Anyone else who reads this go sub and you will have some quality vids to watch.

[@ry12ley2]

you deserve so many more subs bro

[@JesseCollingham]

I appreciate that!