Awesome job man. I looked for over an hour for a video like this. All the other are the eco boost engines. Thank you!
@billanderson6707Ай бұрын
Watched your video yesterday an it helped out alot on my 2013 3.7
@thelab705 Жыл бұрын
Very informative!! Ford OEM is the way to go when it comes to plugs for this 3.7 in my experience with my truck. FYI typically these coils need to be replaced very 150.000km. Not just the boot but the whole coil pack. I would recommend replacing the coils in bank 1 at the very least. Save yourself the headache of having to remove the intake yet again. Bank 2 is very accessible and can be replaced as needed. Also it always seems like cylinder 3 and 6 are the first to go when it comes to plugs coils or coil boots. I have no idea why! Fantastic tutorial ! Good Job 👍🏼
@davidram19749 ай бұрын
Makes sense. Good advise
@Jayman0012 жыл бұрын
AWSOME VID! I HAVE A 2013 XLT 3.7 i replaced pcv valve, spray clean mass air flow sensor, replace air filter and scrubb throttle body while in there while replacing plugs, pour a can of SEAFOM in gas tank…. And that’s the best truck i ever had , it runs smooth like a beast when i need it to respond. I don’t like messing with fluids (not so graceful w/fluids) so i take it in for ALL fluids. GREAT JOB!
@claylyons6447 Жыл бұрын
I recently replaced the plugs on my 2013 3.7. I didnt have to disconnect coil pigtails. Was able to leave them connected. Saved a little time not having to deal with those stubborn release clips. Great video.
@JamesSee-kd8qc4 ай бұрын
This video helped me out thanks for taking the time to make it.
@peterl201711 ай бұрын
Helpful video. Worst part was leaning over the sharp hood latch - miserable engineers!
@scottjuisto95010 ай бұрын
This was tremendously helpful thank you!
@ariq17317 ай бұрын
This is a great video!! Great detail! Made the job easy. Thanks!!
@5PT_HO2 жыл бұрын
Helpful video. Going to be doing this tomorrow and wanted to get a idea on what I had to look forward to.
@Lawnmeadow Жыл бұрын
2 time using this video!!!! Thanks man
@lolillpartete25482 жыл бұрын
Thanks for the video bro 💪🏻
@annettesurfer10 ай бұрын
@17:25 the spark plug gauge still has a sticker on the underside, which may affect the measurement a little.
@UNBELIEVABLE618 Жыл бұрын
Thanks for the vid about to do mine soon
@kinazz192 жыл бұрын
Good video
@ba96282 жыл бұрын
thanks
@wilbertojrodriguez8926 Жыл бұрын
Did you apply any specific torque or just until they feel tight?
@mexquitalza2 жыл бұрын
Thanks for the video.
@Cdmxforever Жыл бұрын
Good job men!
@harlcambell9148Ай бұрын
how do you reach the very back bolt on the passenger side
@Aj-wb5rg5 ай бұрын
Only problem i have is not cleaning motor before opening the intake
@melvinlugo6797 Жыл бұрын
I have the same truck 2013, I can’t find a video for where the coolant temperature sensor is located. I’ve seen for other motors, 3.5L , 4.2L and others and don’t know if it’s located in the same spot. Can you help?
@ironvoice5079 Жыл бұрын
Thanks for the video. Do these kind of motors have issues with not enough threads for the spark plugs like other Ford made?
@levilloyd747 ай бұрын
No
@davidram19749 ай бұрын
Did you used the old gasket seal or installed a new one?
@blasphemi69062 жыл бұрын
Good video man, helped alot
@labboyztv Жыл бұрын
Thanks bro
@joelovitt2900 Жыл бұрын
Bruh. Mine is nowhere as easy as your's. I cant see the plug i cant get the socket on the hex of the plug there is rubber inside i assume to shield coil. Already broke the rubber trying to push down on the plug! I feel like i just F'd up!
@bspeckter Жыл бұрын
I swapped the Motocraft Platinum for NGK iridium’s and now it’s rough idle and says Advanced Trac needs to be serviced???
@thelab705 Жыл бұрын
I’ve tried a few different plugs types of plug. For some strange reason the Ford OEM always work best. FYI Standard blue streak coils at rock auto are great !
@Detownrebel15 ай бұрын
I love “How To” videos from people who admittedly have never completed the process, ever, in their lives. Hit that subscribe button!
@wilbertojrodriguez8926 Жыл бұрын
I thought spark plugs came pre-gap already. Don't they?
@tonyalea1 Жыл бұрын
The ones I just got ngk iridium lol are pretty gapped.
@dennisrichardville4988 Жыл бұрын
They do but you always want to check incase they been dropped while in packing.....