Woodturning - A Little Something Different

[@Deleteitalready]

Perfect. A bloke in his workshop making something and no music. Most enjoyable.

[@JackMackWoodturning]

Much appreciated Jeff. Thanks for watching 😁👍🏻

[@one8bravo785]

Refreshing isn’t it. Great work

[@lewiswereb8994]

Even when there's music, it's not music.More like junk that can distort your concentration.

[@johnbishop5316]

How about the Doors, Break on Through to the Other Side? Which he shouldn't have done. How daft.

[@louisgrissman4857]

@@johnbishop5316 John, please cope harder.

[@yugiohsc]

I still can’t imagine turning a square without cutting off the corners first. Amazing

[@nathandurrett8533]

I shouted NOOO! when I saw that!

[@USCtrojanFootball1]

Same thought.

[@billlaudon2681]

For the life of me, I cannot grasp why folks ever do this. There are zero good reasons. Time? Much much quicker chopping corners off. In fact cutting, and even sanding to even more round I’d still way faster. Skill? Nah, no skills needed to work extremely unsafe. Easier? In no way is it easier bearing down on tool rest while feathering in tools just to stay away from the hospital. Please for the love of god!!! Someone give me a good reason.

[@JackMackWoodturning]

😂

[@JackMackWoodturning]

I’v gone into depth on this topic a number of times so for this ones il keep it brief.. Bandsaws (the likely choice for that cut), take setting up for particular types of cuts.. Mine is set up for rip (long straight) cuts 90% of the time. My lathe which is the machine I use all day every day, about 60 hours per week is designed for making wooden things round.. For me it takes around 45 seconds to take this small piece of wood from square to round. It’s safe, efficient and is the best use of my time. When you consider that no matter what I did to prep this blank I’d still have to mount the piece on the lathe to true it up.. It makes no sense to do an action before that to save time unless that action took me less than say 30 seconds. Hope that helps. Thanks for watching 😁👍🏻

[@myckalldeelaneey3459]

Great video, best part.... no unpleasant music, just that great sound of woodworking.

[@JackMackWoodturning]

Exactly! Music is far too subjective, you can listen to whatever you want while you watch. 👍🏻😉👍🏻

[@sojibahmed9773]

great

[@bldallas]

In junior high and high school I absolutely LOVED woodworking. Took every class available,plus a self study to build a. Major project. The lathe was, by far, my favorite shop tool. I could turn things for hours. Great stuff.

[@JackMackWoodturning]

Do you still get chance to do much turning now Bryan? Thanks for watching man 😁👍🏻

[@bldallas]

@@JackMackWoodturning no, I haven’t done any in decades. It’s fun ti live vicariously thru you, here though.

[@sojibahmed9773]

wow

[@cosmodetriti4440]

OMG! I never thought to live long enough to see a woodturning video that was not a bowl or vase. Thanks a lot!

[@JackMackWoodturning]

Thanks Cosmo. If you liked the stool, I think you will love this one: kzbin.info/www/bejne/hXTGZJqsn7GYkNU Thanks for watching man 😁👍🏻

[@cosmodetriti4440]

@@JackMackWoodturning indeed I loved it. Thanks.

[@PetroicaRodinogaster264]

I love it. As soon as you made the marks for the holes, i knew what it was going to be.

[@tjgentry8296]

Great job! It's almost hypnotizing watching someone woodwork. Just watching is what originally got me in to the craft/trade.

[@JackMackWoodturning]

I couldn’t agree more TJ. It is hypnotic isn’t it. Glad you liked it man. 😁👍🏻

[@PetroicaRodinogaster264]

I cannot watch anything without doing something with my hands at the same time. But when I watch these videos, especially well made ones with no yapping and music, then I don’t need to do anything else… just enjoy it.

[@JackMackWoodturning]

Glad to hear it P. Thanks for watching 😊👍🏻

[@wizdude]

I really loved the part where you used the wood shavings to smooth out and polish the legs. I’ve not seen that done before. It was really effective! Thanks for the great video 😀

[@JackMackWoodturning]

Thank you. That process is referred to as burnishing. It can also be done with fine wire wool if the shaving are not suitable. I appreciate you watching.

[@Dlogreen]

came here for this comment and the response. i assumed it was called burnishing, but wasn't sure if there might be a separate term due to the method. absolutely brilliant

[@jamesheffington3931]

@@JackMackWoodturning so that is just a handful of the shavings from the pile? Or is it a mixture from several different pieces?

[@timselves1]

My dad, who is approaching 86, used to do that all the time when using his lathe. Maybe an older skill. However, I learnt from my dad, so I do it as well.......

[@peterford9369]

My son was in the orchestra and played base. I made him a stool once like that back about 20 years ago. Lathes are super cool tools. I used to make baseball bats for the kids. I made one 40 inches long once. Called it the Babe Ruth. Thanks.

[@JackMackWoodturning]

This is lovely. I love the face that we can make things for our kids. Thanks for watching 😊👍🏻

[@p.f132]

I would have never dared turning down a square. Masterful work. Love it.

[@JackMackWoodturning]

Thanks PF. Glad you enjoyed it buddy 👍🏻😉

[@BuckshotPA1]

Always amazing to see craftsmen creating art and functional pieces!

[@JackMackWoodturning]

Cheers Buckshot. Glad you enjoyed it man ☺️👍🏻

[@user-rr3ph3nj7t]

Учите русский язык мы вас научим делать лучше этого дуралея. Шипов на видимой части изделия быть не должно.

[@TheDellaniOakes]

That looks like such a great footrest, or stool for a child. The oil really made the grain pop. Lovely.

[@JackMackWoodturning]

I made it for my son but he is outgrowing it already! I think I will buy a cow and use it for milking. 😂

[@TheDellaniOakes]

@@JackMackWoodturning There ya go! Always have a backup plan.

[@trees5338]

I'm just a person who KZbin has directed to your channel, I have no skills with wood, but I do very much appreciate watching an expert at his craft. The darker wood for wedges was a nice touch. I would love to learn this skill, but at 66 and recovering from a broken wrist, I'll just stick to watching you videos. Thanks.

[@JackMackWoodturning]

How did you break your wrist T?

[@trees5338]

@@JackMackWoodturning walking the dog, 5.15am, beautiful morning and admiring the star's, no breeze. Not paying attention to the dog, he dashed away, I held onto the lead. Got swung around, landed on wrist. Still holding on to lead. No one's fault, but carried on with walk, holding a torch in damaged hand, dog lead in other. Finished another 5km over dangerous terrain, then had to wait 2 hour's for the local a&e to open.

[@RandallHallKaizenReiki]

What a cute little table for a cute little kid.

[@JackMackWoodturning]

😊👍🏻

[@salsamancer]

Very nice, anyway fun to see somebody take raw material and make something with it. It's amazing how the varnish brings out the inherent beauty of the material in the end

[@JackMackWoodturning]

Much appreciated Nochtczar. Glad you enjoyed it. Thanks for watching 😁👍🏻

[@lucasneufeld2338]

Fabricating made hand items for the little ones always brings such joy. Great video even better item for the little man

[@JackMackWoodturning]

😍👍🏻

[@brentmorgan2750]

Lathe made* Lol nothing hand made about this

[@EgressMan2006]

I learned more from your non-verbal video than I have from many verbal ones. You have amazing techniques. I love how you handle your lathe tools.

[@JackMackWoodturning]

Much appreciated FKP. Glad you are enjoying the content. Thanks for watching 😁👍🏻

[@reetpateet8656]

Absolutely brilliant - boy would I like a little workshop like that. Above all I’d like his skill to even do anything!

[@JackMackWoodturning]

Nice one RP. Thanks for watching buddy 👍🏻😊😉

[@mica4153]

I love the nice little details. Like making sure the wedges were perpendicular to the grain for strength. And the way you get that polish finish when turning!

[@JackMackWoodturning]

Well spotted Chris. You know your wood. Thanks for watching man 😁👍🏻

[@ГариЖижома]

Endlessly you can look at how water flows, fire burns and another person works))

[@JackMackWoodturning]

😊😊👍🏻👍🏻🙌🙌👌🏻👌🏻

[@executive]

I like the trick of burnishing the wood with the shavings

[@ranaldh1]

Finally! A wood turner who concentrates on the imbalance of the piece, before the form!

[@mjremy2605]

Beautiful piece! A child's heirloom stool built by Dad. Nice to see it still being done. The video was very satisfying to watch. Thank you for no music. Don't waste oak trim. Cut off corners and use as pen blanks or with resin.

[@JackMackWoodturning]

Thanks for the kind words. I don’t make pens. I find them to be the most boring and simple things anyone could ever make on a lathe. It bores the arse off me just thinking about turning a pen. I don’t cut corners off one off pieces because iv been turning for more years than I care to say and iv learnt that “saving” little scraps of wood is utterly pointless and leads to a very messy workshop. Shavings on the other hand have so many uses. I do absolutely keep off cuts from nice wood, but I’d absolutely not ever turn two simple pipes to attach to a pre made pen body kit. I literally can’t think of anything less rewarding and more boring 😆

[@martyisabeliever]

He made a square into a circle... amazing! That the wedges werent all parallel to the edge... drove me nuts.😏

[@JackMackWoodturning]

Why would you put the wedges parallel to the edge ?

[@martyisabeliever]

@@JackMackWoodturning one was the other two werent, im a details guy... i put all my light cover screw slots horizontal, i build show cars, hot rods and experimenral aircraft... i know i need help😉🙃...

[@JackMackWoodturning]

You just need educating my friend. Solid wood has grain, and wood will split down the grain if the force applied drives the grain apart. The wedges on the piece are aligned perpendicular to the grain of the wood because the expansion caused by the wedges would drive the wood apart if they are aligned anything off perpendicular to the grain.. that is to say that they expanded into endgrain rather than into side grain. Even rotating them slightly off perpendicular would cause compression as wood will compress perpendicular to the grain, but will not ( or vastly less so) compress into end grain. This is the correct way to wedge a tenon joint, learnt and developed over centuries by the skilled crafts people who came before us and produced the likes of Windsor chairs that still stand strong today after 300 years of use. No screws.. this is joinery.. there are right ways to do it, and there are wrong ways to do it. I do hope this helps you understand woodworking a little better and hopefully inspires you to seek more information in your journey through woodworking. 👍🏻

[@martyisabeliever]

@@JackMackWoodturning fully educated on the grain and wedge rational and physics... thanks Lord Bless you, the woods grain dictates wedge direction, not the astetics, you too are a detail man...👍🕊🙏♥️

[@JackMackWoodturning]

Detail is everything.. but unfortunately wood has no obligation to conform to a given aesthetic. Making practical lasting pieces beautiful must be within the perimeters of the material used. 🤙🏻

[@klausalan]

Inspiring little step stool! Can’t wait to try this on my own. Thanks for posting it.

[@JackMackWoodturning]

No problem Nick. Let me know how you get on. Thanks for watching 👍🏻😁

[@LeX-lc7ms]

Отличная работа! Браво!

[@JackMackWoodturning]

👍🏻

[@jean-louishoules5198]

Hi Jack, thank you to remember us that wood turning was first an utilitarian use. 😉👍

[@JackMackWoodturning]

No problem Jean-Louis. Thanks for watching buddy 👍🏻😉

[@luciusvorenus9445]

Beautiful! It's amazing how a craftsman can look at some assorted wood and see a beautiful piece of furniture.

[@JackMackWoodturning]

Cheers Michael. Glad you enjoyed it buddy 😉👍🏻

[@kathyvick2710]

I love watching sawdust fly, especially in slomo! It’s like snow without the cold! 😉

[@JackMackWoodturning]

What a nice image. Sure there is an idea for a video in there somewhere 😉👍🏻

[@Beariam24]

4 bits of wood can make something so simple and elegant. 👌🏻

[@JackMackWoodturning]

😊

[@itsmehere1]

2:20 this has to be one of the coolest sounds I've herd this week.

[@fritzthecat2634]

This is exactly why I am interested in beginning wood turning, to be able to make things for my future grandkids. I figure if I start now I may at least have some idea of what I'm doing when they are born. My kids are only 16(son) and 14(girl) so hopefully I have plenty of time to learn. 😉

[@JackMackWoodturning]

Cheers Rick. I appreciate you watching. I love this comment.. it sounds to me like THE most perfect reason to get into wood turning. I can’t recommend it more as a hobby, you get instant results,, but the path of learning woodturing is a fascinating one too.. it’s very more’ish. In the next 10 years you could be a master at the craft. There’s no time like the present. Feel free to fire any questions at me as you start your journey. Enjoy 😊👍🏻

[@meenusisodia9461]

0

[@gdog9010]

I subbed just because of this comment.

[@chuckhembree6101]

Fickle, please listen up, you need to be VERY GLAD you will have grandkids because my only blood son went down that damn gay road. I wish you all the best sir, but please be grateful.

[@JackMackWoodturning]

It’s lovely to here your sons so happy Chuck. 😊

[@MartinMMeiss-mj6li]

Nice stool. A design feature I like is to taper the legs from some point along their length down to where they touch the floor. This gives the stool a graceful look.

[@ralphhross]

Great idea and design. I really liked how you used the ebony shims for decoration and strength. I will try this one out. Thank you.

[@JackMackWoodturning]

Thanks a lot Ralph, much appreciated, 😁👍🏻

[@NightRunner417]

I love how this is really all just a virtual object in the worker's head, slowly coming out of thought and into the real world. I'm amazed at the precision just from freehanding. :-)

[@JackMackWoodturning]

Thanks NR. Much appreciated. Glad you enjoyed it 😉👍🏻

[@B2T7RID2QGLEHH5UZFB0T]

I've never seen that sanding with the woods own shavings technique before that's pretty cool

[@JackMackWoodturning]

That process is called burnishing, it can be done with fine wire wool or shavings from the same piece of wood. It has to be done after the correct sanding steps but In essence it gives the last polish/shine to the wood before applying finish.

[@B2T7RID2QGLEHH5UZFB0T]

@@JackMackWoodturning that's very interesting! Thanks for the tip

[@theclockworkcadaver7025]

I didn't know what I was signing up for when I clicked this video but I'm really glad I did. It was fascinating watching the piece come together and eventually figuring out what you were making! Really great work.

[@JackMackWoodturning]

Nice one TCC. Glad you enjoyed it. Thanks for watching ☺️👍🏻

[@maxinee1267]

That was very interesting to watch, thats a stool which will last a very long time. beautifully done. I would say you have mastered it.

[@JackMackWoodturning]

Thanks Maxine. That was the plan, hopefully my grandkids, grandkids, grandkids will sit on it one day. 😁👍🏻😉

[@MarsMan2482]

I started the video to check it out... 12 minutes later and im still here. Good stuff

[@JackMackWoodturning]

Well, happy days.. glad you enjoyed it my friend

[@fiz1ne]

So glad we have woodturning as a class, so fun.

[@JackMackWoodturning]

That is amazing. My school had Design Tech but it mostly consisted of people standing over sinks, having competitions who could make the biggest ball of solder. 🤣

[@fiz1ne]

@@JackMackWoodturning haha that's hilarious. Our school doesn't have much cool stuff going for it but we got a wood shop teacher that has 12 lathes and an alcohol addiction. He's an awesome guy, doesn't drink like he used to. Completely random 😂

[@baturbaslar]

Great work and design that respects the natural beauty of the wood.

[@JackMackWoodturning]

Nice one BB. I’m glad you think so. Thanks for watching 👍🏻😊

[@ВасилийТеркин-э2м]

Ну да мастерство не пропьешь... ... здоровья!!!!

[@richie-rich3035]

Your attention to detail is refreshing to watch. Thank you for your quality workmanship!

[@JackMackWoodturning]

Cheers mate glad you enjoyed it

[@jimclark2293]

0

[@s.z.493]

Главное чтобы маленький заказчик был доволен! 🙂

[@StanWatt.]

Certainly a level of ability to aspire to!

[@AZMarine513]

I have done this. After I draw my target circle I cut the corners off in the bandsaw. Much faster and easier on the equipment.

[@JackMackWoodturning]

I’v gone into depth on this topic a number of times so for this ones il keep it brief.. Bandsaws (the likely choice for that cut) take setting up for particular types of cuts.. Mine is set up for rip (long straight) cuts 90% of the time. My lathe which is the machine I use all day every day, about 60hours per week is designed for making wooden things round.. For me it takes around 45 seconds to take this small piece of wood from square to round. It’s safe, efficient and is the best use of my time. When you consider that no matter what I did to prep this blank I’d still have to mount the piece on the lathe to true it up.. It makes no sense to do an action before that to save time unless that action took me less than say 30 seconds. Hope that helps

[@neilanyon4792]

@@JackMackWoodturning I have to admit I was thinking like Will, but your explanation makes perfect sense when you think about time. Great channel and inspirational work.

[@qolbalt9289]

@@JackMackWoodturning this brief explain a lot, thanks 😀

[@tedhaubrich]

If that way makes sense for your situation, great, but Ill continue to either spend 30 seconds on a band saw cutting the circle close (Im lucky enough to have a table saw for ripping, my band saw is for curves.) or at least cutting off the corners into a hexagon. Yes, it's an extra step, A. I hate interrupted cuts on the lathe, it just feels unpleasant. B. I like variety I'd rather do 2 steps for 5 minutes each than one for 10 minutes C. I really do not enjoy sharpening lathe tools. Not really a right or wrong just what works for a person.

[@fiveoboy01]

You can still cut the corners off with just any bandsaw blade no matter what it’s setup for. Just laziness and unsafe practices.

[@chrisduitsman2918]

Piece of hand made furniture that looks just amazing. Great job!

[@JackMackWoodturning]

Nice one Chris. Glad you enjoyed it. Thanks for watching 😁👍🏻

[@OleJ.Johansen]

Great to see someone who shows that he really can turn by not using those xxx carbide tools continuously - and agree, no irritating, monotonous music.

[@JackMackWoodturning]

Are there people calling themselves woodturners who use those awful things ?

[@MattyIce2214]

Really nice! Picked up a wood lathe yesterday 2nd hand with a crap ton of tools. Also, I wish he would have turn all the wedges in the top of legs to where they are all pointing inward towards the center of stool. Would have added just that tiny extra custom touch of detail

[@JackMackWoodturning]

Cheers Matt.. lots of people say that about the wedges but if you were To put a wedge into a wood In any way other than perpendicular to the grain of the seat you risk splitting the top, worse still wood compresses when force is applied to side grain, meaning over time that joint would definitely fail. The extra touches of detail in wood working come from knowledge my friend.. not style over substance 🤙🏻

[@danbradley7176]

Beautiful result. Liked the thumbnail too, made me think "what could possibly go wrong"

[@JackMackWoodturning]

Thanks Dan. Glad you enjoyed it 👍🏻😁

[@bradgibson4459]

Hopefully that will be a piece that will be passed down from generation to generation and also the skill set along the way!

[@JackMackWoodturning]

Me too, I’m sure the stool will but I can’t say for sure my son will want to turn wood. It would be nice if he did 😊 Thanks for watching 😊👍🏻

[@steveharsant3859]

Love the finished touch with the dark pieces for wedges, sets it off beautifully. Cheers from NZ👍

[@JackMackWoodturning]

Thanks Steve, glad you enjoyed it man 👍🏻😉

[@janefuzzy4816]

This would look great in our nursery.

[@JackMackWoodturning]

Thanks Jane. 🤔 😜

[@jethrom8702]

Wow, a three legged stool. Amazing. How has mankind survived without this?. My life was incomplete. I'm soooo glad this was not a complete waste of time!

[@JackMackWoodturning]

Awesome man me too. It would be awful if you had don’t something that was a waste of time. 3 legged stools are about the oldest piece of furniture going.. so there another thing you gained from this.. Happy days eh 😘

[@Givulinovich]

Simply beautiful. Love the quarter sawn wood.

[@JackMackWoodturning]

Thanks, I appreciate you watching 😊👍🏻

[@colinmurphy7566]

Love the chair and love that you made it for your kid :7

[@JackMackWoodturning]

Thanks Colin. Glad you enjoyed it buddy 👍🏻😉☺️

[@rl2109]

Whew! After a rough start, it 'turned' out nice!

[@JackMackWoodturning]

What rough start ?

[@rl2109]

@@JackMackWoodturning : Started off sounding like B-R-R-R-R-T before it rounded off and the sound smoothed out! Expert hands...! Fine result, too!

[@JackMackWoodturning]

Oh the sound. Cheers bud. Glad you enjoyed watching

[@rl2109]

@@JackMackWoodturning : Same here- glad I watched... Just subbed, and now I have some catching up to do! Keep doing what you love!

[@sandydee8003]

I so enjoy your channel. That finish you added by using the wood shavings I had no idea that was done. Oh, and thanks for not saying in the title what you’re making. I really enjoy figuring it out as you go. 👍

[@JackMackWoodturning]

Cheers Sandy. Much appreciated. Thanks for watching 😉👍🏻

[@barrybakin3317]

I am learning as much from your responses to comments as from the original video. Thank you for responding to comments with sincerity and patience!

[@JackMackWoodturning]

Thanks Barry, I try to most the time but sometimes I loose my cool a little. Where possible I try to share my years of experience with those who want to learn. Always happy to answer any questions you might have Thanks for watching 😊👍🏻

[@scaira60]

That is a very cool quartersaw white oak stool💪💪💪🪑🚪🪚🔨📐🇺🇸🙏👨🏻‍🦯👨🏻‍🦯

[@JackMackWoodturning]

Nice one Scott! 😁👍🏻😉

[@mrbfros454]

The craftsmanship and attention to detail are so impressive. Beautiful work!

[@JackMackWoodturning]

Nice one B. Love the tux!

[@kuznec8444]

Углы дощечки можно отпилить а потом точить. Отличная работа 👍.

[@АлексейЧуклимов]

Нужно. Автору повезло что дерево не порвало, резец не отлетел, руки и другие части тела остались целы.

[@batya7]

Beautiful work, fabulous explanations to Qs in comments. May your son get much use & pleasure from the stool. Made with 🧡.

[@JackMackWoodturning]

Thank you JHF, that means a lot. 😊👍🏻

[@saeedkaukab1791]

WHAT A PERFECTION, CRAFTSMANSHIP !! 👌👌👍👍 WOW.

[@JackMackWoodturning]

😊👍🏻 thanks for watching

[@somethingelse4424]

I can really feel the chips in my eyes. 3:08 points for the immersive experience.

[@JackMackWoodturning]

Haha thanks SE. Make sure you always wear your safety glasses. Thanks for 😁👍🏻

[@rhydsnow851]

My grandad made stuff like this. Thanks for the video!

[@JackMackWoodturning]

No problem R. Thanks for watching 👍🏻😊😉

[@SolidShip]

Masterpiece!❤

[@JackMackWoodturning]

Thanks Ye! Glad you enjoyed it 😉👍🏻

[@bunkerTools]

I liked a lot this project. Exelent made!

[@JackMackWoodturning]

Thanks. I appreciate you watching 😊👍🏻

[@lyndenhawkins7107]

as soon as i saw the legs getting made i knew it was a stool bravo very nice

[@JackMackWoodturning]

Thanks Lynden, glad you enjoyed it 👍🏻😁

[@jessevennard2640]

Nice work!! I don’t like to be critical but I have symmetry ocd and just wished the wedges all pointed either to center or horizontal to it. New subscriber. Keep it up

[@strps-of2089]

Exactly, why? why? 😫

[@JackMackWoodturning]

Because each wedge is perpendicular to the grain of the wood, which is the correct way to make a wedges joint that will last a lifetime and more.

[@epharston]

Stool sample?! Seriously, love the work. And I echo the need for push sticks. Keep your fingers!

[@JackMackWoodturning]

Hey Epharston, I do condone the use of push sticks and have used them in other video’s. I didn’t deem it necessary in this case. The angle makes it look more unsafe than it actually is. Thanks for watching 😁👍🏻

[@cs_photoshoot1982]

I didn't expect that he would turn square into round amazing 👍 ❣️🥰 Love from India 🇮🇳🥰❣️

[@JackMackWoodturning]

Much love from the UK 🇬🇧

[@judithfairchild8620]

Somebody's going to be happy with that present

[@JackMackWoodturning]

Yeah he loved it. 😊 Thanks for watching Judith

[@jalexwheeler7751]

I'd never thought of using the shavings as a final polish. Very interesting technique. I assume it transfers some of the oil, and also fills microcracks.

[@JackMackWoodturning]

I don’t believe it dose either. It simply buffs the surface. I have read a number of papers on the function of burnishing over the years. Many different options of how it works. But the same outcome can be achieved with fine wire wool so I’m sure there is no transfer of oil or filling going on. It is the same buffed surface you see when the bevel of a gouge has been pushed into wood during a cut.

[@jalexwheeler7751]

@@JackMackWoodturning Hrmm, when I use steel wool or an Emory cloth, I generally see tiny bits of material transfer. I think I will have to experiment with this method to see how it works. if only my shop wasn't already too full of projects. But then, without projects, I suppose I wouldn't need a shop.

[@NikhilWolf]

Where in the video is the technique you're referring to?

[@jalexwheeler7751]

@@NikhilWolf Near the end where he's using the sawdust/shavings to polish the workpiece.

[@siding8]

The kids are gonna love it! Thx for sharing.

[@PipeDreamerJacques]

Beautiful! Next time you might point the wedges diagonally in toward the center so they are symmetrical.

[@AlanLangford]

Seriously. All that work and just one detail missing.

[@JackMackWoodturning]

This would create a weak stool James. I built it to last. Thanks for watching 😁👍🏻

[@madhattermd1]

@@JackMackWoodturning hello, not a wood worker here, how would that affect the strength of the chair? Grain structures not lining up?

[@mikieswart]

@@madhattermd1 you have to put the wedges in going perpendicular to the grain so it won’t force the grain apart over time there’s gotta be better words to describe it but i can’t word right now, too early

[@Yoshikaable]

@@mikieswart made sense to me!

[@jimgardner5129]

Absolutely lovely. An heirloom that should last generations. And here I thought you had cows to milk. :) (But that would typically be a one-legged stool.)

[@JackMackWoodturning]

Thanks Jim, I appreciate you watching. 😊👍🏻

[@bird1962]

hahaha...c'est ce que j'ai aussi pensé...cela s'appelle dans mon pays un botte-cul

[@pellikan64]

Nice seeing someone using more traditional lathe tools. Most videos these days are all about carbide cutters. I can’t remember the last time I saw a skew being used. (Although it’s one of my favorite tools) Well done

[@JackMackWoodturning]

Much appreciated Mark. Thanks for watching buddy 👍🏻😉😊

[@billhatcher2984]

Beautiful it is getting hard to get quarter sawn lumber without paying an arm and a leg for it you made good use of the small piece y you had 👍

[@JackMackWoodturning]

Iv got tons of it bill. Generally I cut and dry it myself and they tend to be short boards. But it’s also readily available from suppliers round here too. Seems all timber is shooting up in price at the moment too, but isn’t it always 🙄 Cheers for watching 😊👍🏻

[@RimWulf]

Loving the shine when he who slowed down the turner.

[@JackMackWoodturning]

Nice one Rim. Glad you enjoyed it buddy 👍🏻😉

[@harrylake9388]

I can’t stop watching this stuff.

[@JackMackWoodturning]

Well that’s good to hear! Glad you enjoyed it matey 😂👍🏻

[@bloominhives5234]

That is really nice, great job

[@JackMackWoodturning]

Thank you, glad you enjoyed it. 😊👍🏻

[@simonmcmanus3639]

This was a joy to watch , the finish you get off the tool is amazing. Beautiful simple design and nice with the contrasting wedges. Just subscribed .

[@JackMackWoodturning]

Nice one Si. Thanks for watching man 👍🏻😊

[@jbeni6642]

Gut, daß mal die Arbeit aus unterschiedlichen Perspektiven gezeigt wird. 👍

[@JackMackWoodturning]

Sorry I have no way of translating this

[@marjrose3640]

I love this little stool. I am assuming the disc you glued into the bottom is to prevent the wooden top from splitting later. What a great idea. Beautiful job! Thx!

[@JackMackWoodturning]

The part your are referring to is a recess, it’s used to hold the wood on the lathe via the “Chuck”, which is the silver part that the wood attaches to.. The recess is used to hold the wood while I work on the opposite face of the piece. Once it’s work is done it’s filled to avoid any sharp edges added on the finished piece. Thanks for watching 😊👍🏻

[@larrybooth1771]

All that's missing is the cow. Good work.

[@JackMackWoodturning]

🤣🤣 Thank you 😊👍🏻

[@1crazypj]

I guess a LOT of people have never seen or even heard of a milking stool?

[@jonomoth2581]

Well this comment confused me before Id finished the video and found out what it was

[@sheldonwright2061]

Good looking stool. Wasn't what the thumb nail showed. Thought i might learn something new. Good looking stool none the less.

[@JackMackWoodturning]

Glad you like the stool Sheldon, sorry you didn’t learn anything. Thanks for watching 😁👍🏻

[@glennprovenzano1837]

Very nice

[@JackMackWoodturning]

Cheers glen, thanks for watching 😊👍🏻

[@gostrongorgohome]

Why did you remove wood from underside center then replace it with another disc ?

[@JackMackWoodturning]

Hi, thanks for watching. That’s a recess used for holding the wood on the lathe, the jaws of the Chuck expand into the internal walls of the recess to give a good firm hold. it was then filled with a matching plug for aesthetic reasons but also because the stool was made for my very young son and I didn’t want sharp edges anywhere on the piece. Hope that helps 🙂👍🏻

[@paulortiz2035]

Not to pick nits, or perhaps others have brought this up already, but the splines are not asthetically pleasing. My OCD would never allow me to do what was done. Just as all of the visible screws in my home must point straight up or be parallel with the floor (in different rooms, for obvious reasons) I would have aligned them to point toward the center of the seat, or made buttons to fill the tops of those holes. Not that you asked for my critique but it is a very lovely piece. Beautiful even. Please don't forget to sign and date it, with for whom it was made. So in 80 years time when the great-great grandkid gets it it will have a complete provenance! I have several things from 4 of my great-grandparents which have pride of place at my house! At some point my great-grandkids will get them. My g-grand mother, who I knew well, was born in 1870, and my g-grandchild in 2018. Which is 7 generations and a 150 year span of time! It would be nice if your piece was still in use in 150 years and that each generation knew who made it and who it was made for! IMHO.

[@JackMackWoodturning]

Thanks for your comment. Very lovely. The alignment of the wedges is in essence the thing that could make this stool last 7 generations 🤞🏻 Expanding a joint in any direction other than perpendicular to the gain of the seat would cause the pressure to split or weaken that wood. I’m sorry to hear of your disorder.. (which seems an odd word to use when describing OCD) you must find it terribly difficult, and harder still when you read the other comments on this video where people refer to “their OCD” as a reason for wanting the wedges to be pointing to the centre. Il be sure to date said stool. Thanks for watching 👍🏻😊

[@deavman]

@@JackMackWoodturning Damn! You have thought of everything! ( the direction of the wedges).

[@JackMackWoodturning]

@@deavman I can’t take any credit.. people have been making seats/stools/chairs in this way for centuries, wood working is all about learning from the guys who came before. They knew what was what. 😊👍🏻

[@alienhazy]

I can't even imagine the delicate touch and years of experience that you'd have to have to turn a piece that has holes in it without fucking it up. incredible video! thanks!

[@JackMackWoodturning]

Haha nice one man. What is septic sauce? 😂

[@ИльдарИбрагимов-щ7ч]

Красиво при любви к процессу.. но слишком заморочено для детской табуретки.

[@anglerseawolf9919]

Imagine going to a physician for an appointment with this. "Ok Doc, I brought you a stool sample".

[@JackMackWoodturning]

😂😂

[@wizdude]

Doctor: “your stool is so smooth and shiny” 😂

[@JuanPabloakaJP]

😂😂😂

[@HartyBiker]

Man that'd be a crap joke

[@andiehammettz4u265]

He'd say lay off the fiber.

[@sfeather7088]

Awesome Video.....No BS....No TECHNO Music.....Good Editing with no frills. LOVED IT :)

[@JackMackWoodturning]

Cheers buddy. You can come again 👍🏻😉

[@kevinspencer6055]

The BS was the thumbnail

[@gabrielp1306]

As a machinist, this terrified me when I saw him put the chisel to the turning corners with his hand, big no-no when working with metal, especially with those corners so far out from the center. But I guess with wood it's fine, as this guy's hand isn't missing like it would be with metal. 😅

[@JackMackWoodturning]

Just as well it is oak and not steel 😁👍🏻😉

[@neurotictim1]

No, it's not okay even though it's wood. Bad habits make for bad injuries.

[@JackMackWoodturning]

It’s not a bad habit matey. It’s a completely safe practice. Stick to what you know eh 👍🏻

[@gabrielp1306]

@@JackMackWoodturning yeah, I figured as much if you were doing it, it just scared me at first is all I'm saying

[@JackMackWoodturning]

@@gabrielp1306 understandable mate. But I assure you it’s not dangerous, it is if you pop your finger in there but it goes with out saying that you don’t cross the line of the toolrest. Turning a square this size is not different than a circle of a larger size. Check out this video to see what I mean. kzbin.info/www/bejne/q2eolZiiZsebftk Cheers 😊👍🏻

[@Myebayvideoschicago]

This would also make an awesome side table next to a grill! Well, probably about a foot or two higher ;)

[@JackMackWoodturning]

Thanks for watching Jay. Maybe I’ll increase the height next time 👍🏻😁

[@maxlschlogl1183]

2m. glaube ist doch etwas hoch.....🤔

[@blueyedhillbilly7047]

aaaaaMMMMAAAAAAZZZZing! You are. Just saying. I watch your videos and am BLOWN away.

[@JackMackWoodturning]

Thanks B. Are you a woodturner?

[@davidcolin6519]

My father was a keen amateur wood turner when he was younger. He's now in his 90s so doesn't do it any more. the sound of the machinery and cutting still takes me back though. I do have one question though; Why did you take out the disc underneath only to then replace it with another? was this to stop the main disc from warping?

[@JackMackWoodturning]

The part your are referring to is a recess, it’s used to hold the wood on the lathe via the “Chuck”, which is the silver part that the wood attaches to.. The recess is used to hold the wood while I work on the opposite face of the piece. Once it’s work is done it’s filled to avoid any sharp edges added on the finished piece. Thanks for watching 😊👍🏻

[@vmtracy]

This is such a beautiful stool. Hopefully it will be there for your grandchildren and their grandchildren as well. :-)

[@JackMackWoodturning]

That is certainly the plan Virginia. Thanks for watching 😁👍🏻

[@Humongous_Pig_Benis]

11:17 That's a good technique for wiping your stool!

[@JackMackWoodturning]

He he he 😂👍🏻😉