2K CLEAR OVER LOW RUSTOLEUM SPRAY CAN PAINT JOB

[@tonylashmit2613]

Best rattle can paint job I've ever seen!

[@StoneyBrownTV]

Just superb work! Absolutely beautiful! I was waiting on this one. The Rustoleum by itself looks amazing but adding clear just took it up to another level. Be blessed my friend.

[@JamesDguy]

Thank you and your right! 100% on another level now. God bless you!

[@DZ32100]

I must say I’ve been painting cars for a while. You just turned a spray can job into a professional job adding a 2K clear looks amazing. Always use that clear. It looks fantastic. Looks like a professional job outstanding.

[@danielembry5157]

You do great work and I appreciate you posting your progress. Thanks to you I resprayed my hood for my 06 Toyota Solara and used the 2K clear over it. It needs another wet sand and buff but all my friends and family say it looks professional. I'm not so sure about that (lol), but not bad for in my carport out of direct sunlight. I hope it holds up over time. Keep spraying brother!

[@JamesDguy]

Thank you and that’s awesome it’s nice to see others getting good results!!

[@speedokoterefinishnetwork4937]

Dude you absolutely killed it 😇😇😇😇

[@JamesDguy]

Thank you! I still wanna wet sand and do some flow coats with speedokote once we move

[@speedokoterefinishnetwork4937]

Yea sand her down with 2000 grit real nice and then throw on a few more coats of smr1150 and it will keep looking nicer and nicer the more coats of clear you do

[@MrGotenz21]

Are you planning on wetsanding the clear to remove the orange peel? I REALLY want to see just how good this can get!

[@garyny4073]

​@@speedokoterefinishnetwork4937 what point does it end though ?

[@speedokoterefinishnetwork4937]

@@garyny4073 I've herd of some shops flow coating a car 2-4 times until it's close to perfect. 3-4 coats and blocksand, another 3-4 coats block sand again ect ect

[@mre912]

Bro, that came out so clean. Wet sand and buff and it'll look like a professional spray gun job. Blessings from Colorado 🤙

[@JamesDguy]

Thanks and I linked a video of me doing that to my wife’s crv in the description but your 100% right! Thanks again for the love! God bless!

[@Show-TimeJ]

Praise Brother, The car looks amazing. Keep up the good work!!!

[@JamesDguy]

Thank you 🙏🏻 God bless you

[@josephlanger3768]

Just found you. Working through some of your videos. I'm really impressed that you are giving people a legitimate alternative to $5000.00 paint jobs. I have been thinking about this myself for quite a while. Paint is paint. If you can spray it on, and you have decent technique, you can get some very impressive results. Obviously a $12.00 can of paint will probably fade or chalk up in a couple of years, but I think you solved this by top coating with the 2K clear. Other than your time, you probably have $100.00 to $150.00 invested in your paint job, and the results speak for themselves. Your car looks great! Good enough for 95% of people! Would love some follow up to see how it holds up in a couple of years. Great job and keep posting!

[@zacksrandomprojects9698]

Ive been watching you for years now and everytime you paint something I can definitely see you've gotten better and better. Looks amazing. 🍻

[@JamesDguy]

Thank you 🙏🏻

[@eeiko321]

That’s awesome how you showcased this. Saving thousands of dollars for people who would’ve thought it be impossible

[@i11u5ion9]

That's a really good job for rattle can. I paint cars professionally and started out with the spray cans back in the day. A lot of work for sure, but keep at it there are a lot of tricks to knock down the labor and time for the same finish. I like to say I work hard till I get smart ;)

[@larylhuntington5398]

Love the car, the color and especially what you did with the back bumper. Also loved the message at the end. You did a great job bro. God Bless.

[@roderickdewberry9753]

Looks great!! You definitely got some real talent. Your vids are always great!

[@JamesDguy]

Thank you 🙏🏻 All God given and all Glory to HIM!

[@johnmcconnell6294]

You've inspired me to do this on a few cars that I have. Great job man!

[@amberdamas9455]

LOVE HOW YOU INCORPORATE GOD IN EVERY THING YOU DO SOMEHOW LOVE IT GOOD IS GOOD!

[@carrier19781]

LOVE YOUR CONTENT!! I'm currently about to paint my small suv grabber green and decided to pull the trigger seeing how good you make your cars look.

[@JamesDguy]

Awesome!! I love grabber green! I have done so many vehicles that color and with a 2K clear over the top it would be even better! I pray it all works out in your favor! God bless you!

[@lildno2007]

Great Job. You definitely was my inspiration for rustoleum paint jobs. I learned so much from you ❤

[@kortam6065]

Love that you add YESHUA✝️☝️ Godbless you brother

[@saxyrep1]

That 2K clear's one of my favorite. Great job! Real inspiring!

[@RatliffRacing]

Amazing Job Brother. God has Blessed you with cool talent i have been painting cars for 15 years and that paint job is killer. God Bless and keep up the good work.

[@bazilwreckerloughead]

Looks great. Every time I'm about to spray paint anything, I first shake the paint using my 'Paint Shaker 3000' & I remember where I learned to make it!

[@JamesDguy]

Ha YES!!!

[@franchise-pj6ow]

Great Job brotha ! You obviously had the car prepped to perfection prior to spraying it ! JESUS IS LORD !

[@EDZEN94]

love your work, been watching for a long time & still haven't mustered the courage to DiY my integra, (also paint cost more here in Australia).

[@JamesDguy]

Yea I have heard they haven’t been good to y’all there on spray paint prices. I’ll be doing my brothers integra soon as well. Maybe that will get you motivated. Either way hope you find a way to get the paint cheaper.

[@jbynum67]

It is absolutely insane how good that car looks from spray cans!

[@sbouaphaphan]

Thanks for posting this video. It answered a question i had about putting 2k clear on rustoleum enamel paint. Im actually currently doing a rustoleum turbo can paint job flat black. Im going to put Speedokote 2k clear SMR-1150 on top with pearl in it. This makes me more confident with my decision to go this route. Lets hope for some great results! 😁😁

[@Ash-cz7gp]

Awesome video!! I found this while searching about rattle-can clear coats for a very small table surface and here I stumble across you painting an entire car! Amazing and a very well done video. Great color on that Honda too BTW.

[@TheIzzo]

nice, I'd be interested in chrome powder coating or replacing chrome on chrome wheels

[@shiftwrenchrepeat]

Looks great man! Learned of the 2k years ago because of you!

[@JamesDguy]

I’ll be honest I don’t remember where I learned or it from but glad I have it now!

[@sacul7694]

I know Killeen TX very well. Was stationed at Hood back in 93. You would laugh at my spray can paint jobs on my old 74 nova. Looks killer man!

[@Wilkwayadventures]

Looks awesome! I'm about to do the same process on my Prius, which has been spraypainted a few different colors. I'd LOVE to see you do a full car with the Colorshift, mostly because I'm very curious how many cans it would take!

[@JamesDguy]

That would be very expensive but would be awesome if it worked out well because i have seen it done panel by panel and looks amazing but it takes like 2-3 cans per panel depending on size. You need black base coat, then the color shirt a few coats at least then the 2K clear over it.

[@Wilkwayadventures]

@@JamesDguy it seems like it’s going away, or at least wal mart no longer lists it as available.

[@mlr080965]

Jumping out of my seat with your technique but you still go great results....more power to ya!!

[@juliojreyes6234]

Love these videos buddy. Many blessings to you

[@JamesDguy]

Thank you 🙏🏻 God bless!

[@exerperez420]

Good job brother God bless you and your family Hello 👋 from Puerto Rico 🇵🇷 🙏🙏🙏❤️❤️❤️🇵🇷🖖

[@selfselfself]

That's a good job you've done there, lovely colour too.

[@LTT.Official]

Same exact thing I did waaaayyyy back when I started following you, 5k subs I think. I just used Sikkens clear in a cheap harbor freight gun. Still on the car all these years later.

[@JamesDguy]

That’s awesome! I wish I could use my gun but neighbors love to call me in and they didn’t hear the spray cans lol the compressor is a different story all together lol that bad boy wakes the dead

[@LTT.Official]

@@JamesDguy Check out the California Air Tools 8010, thats the one I have, the thing barely makes any noise.

[@jeffreyortiz8361]

Yah Bless you! Great job! Keep spreading the WORD! 🙏❤️🙌🔥💪💯

[@ghost.of.aleksz.salad.]

iv been painting with spray cans for 24 years, they can make a amazing end result if you know what to do and get lucky with the chemical reactions, some times paint just reacts bad to the base coat or even on its own coats that are half dried..

[@mitchellaustin2137]

Amazing color on that one. Love it! Keep up the excellent work, you inspired me to repaint my beater '03 Volvo C70. Thank you!

[@gordiefrench5342]

What master at the rattle can It is crazy how good it can be with rustolem Great job sir

[@Kaiser187]

Looks absolutely amazing now! Talk about a transformation. Great job my friend.

[@emmanueln.8020]

You really need to open up a shop. You can help a lot of people out that don’t have a lot of money to spend on a good quality paint job your paint jobs come out Awesome and very professional looking keep it up brother we appreciate it. Great Contant.😎👍

[@apismalik]

pro painter will hate this

[@RealMTBAddict]

Content

[@ricardomiles6826]

@@apismalik I do

[@kais2345]

Probably hard to do this as a shop as the paint will fade within a couple of years (assuming it's garaged and looked after, it will fade much quicker if exposed to sun) and it still takes enough man hours to do all the prep work that it'd not be cheap to pay for. It's more of a fun/cheap alternative if you have spare time and enjoy doing this kind of thing :) All that said, while it's fresh it looks very fresh.

[@kurtgood2914]

Good job my good friend and thank for sharing this video, God bless you friend

[@elili8016]

I did this method too, i recommend waiting few days after clear to wet sand it. Also primer before you use regular 2x paint and make sure the car is really really prepped even in the hard to reach places.

[@haac4825]

Like it. Looks very different with that shine wet look. Like it.

[@Nemo_423]

Much better with the 2k clear, thanks for sharing

[@sinformant]

I still think you should buy some chopped carbon and try your hand at skinning the stock hood. It'd probably be the very first ep3 with a forged carbon hood and would make for some great content to draw in more subs and views. Maybe even cut some vents in it as well

[@JamesDguy]

Ha you over estimate my abilities man. Appreciate that lol

[@sinformant]

@@JamesDguy nah you underestimate them.

[@piercewright3811]

You've made me really want to give my bmw a rattle can job like this. You made it look crazy good.

[@vanlife4256]

Brother! Awesome job! Thank you for sharing! God bless from Alberta Canada!

[@acevedohiram]

She looks even better bro, too clean🧼🧼

[@marwanmuna9042]

Absolutely sick. Gorgeous.

[@mitchellmartinez8066]

Amazing brotha that’s gotta be the best rattle can job I have seen on KZbin 🔥🔥🔥🔥you have talent

[@luisandmariabonini3285]

That color is absolutely fabulous love it

[@michaelm_713]

Awesome JOB!! I’m looking forward to trying to do my own paint on my Civic next month hope it turns out somewhat OK 😂

[@anthonylewis6335]

Wishing you tons of luck & Prayers your work is awesome! Keep up the good work & keep them videos comin I look forward to them

[@kckk7027]

Excellent job on all of the videos that I've watched so far, I like your work..... Killeen, Texas, sweet, I was stationed there at Fort Hood back in the 70s....

[@BEubankbuilt]

Looks good! How come u don't use a sanding block how wavey does it look by sanding with your bare hand?

[@JamesDguy]

I did use a sanding block a lot in the video but hard to see in some of them. It’s a foam sanding block and it didn’t work as good as hand sanding and wasn’t wavy. I definitely block sand when doing bondo or flattening. I have used it both ways but prefer doing it by hand on curve surfaces but the roof ended up getting block for the final pass. Didn’t wanna make it too boring so I just speed most of it up. I could have made it far more detailed but I’ll answer as many questions as I can to make up for it.

[@camlobesvtec]

Unbelievable transformation.

[@drpiv]

Amazing job, always enjoy the videos

[@GorrillaFastTv]

Bro I been watch you for a lil min and your skills are crazy with the rattle can 🔥🔥

[@tinkertable1977]

Well done. Looks awesome!

[@jordyywolf]

God bless, love the rear bumper ❤

[@tesladura3085]

Super impressed with what you were able to accomplish with shaker cans. You want to come out to California and paint my 2005 Dodge Caravan? I'll do all the wet sanding. Cheers and God bless.

[@Questionbhv]

Nice Job ! The idea with the Carbon Hood could be good contant to lay some carbonfiber with epoxyresin to have a "carbon look" hood for cheap . Keep it up

[@JamesDguy]

Would be cool but I’m not that skilled haha

[@RMH857]

Awesome work Guys. Dang, if my rear quarters weren't bad on my 05 Mazda 6, I'd probably go the same route. Great job!

[@jordanbest3926]

Turned out great as usual!

[@JamesDguy]

Thank you 🙏🏻

[@GamersParadise421]

Wish u could do my new 97 Honda prelude wish me luck. Gonna paint it Veterans day when I’m off. Thank you to all the men and women who fought and gave their all for our freedom. God Bless Us All.

[@santiagolozoya3439]

how did it go?

[@GamersParadise421]

@ I gotta sand it down more and primer it first. I was gonna be lazy and not do any of that. Then I saw how nice it look with it being sanded

[@chris01479]

Awesome work. I have got questions. Can I make great finish using with raffle can if I use it inside the spray booth?

[@JamesDguy]

Yes absolutely!

[@kingkobra91yt46]

Brother God bless you 🙏🏻

[@user-pwfus]

Looks wicked for a spray can paint job water sanding is the key for that no orange peel shine ;)

[@levienns1796]

Thanks for the video and the message at the end, amen man! So true, takes alot to do that and thank you for sharing God's love through your channel.

[@DarkSmokeNinja]

I used duplicolor when oainting my car, but i had no idea Rust-Oleum was this good too. Thanks for the videos

[@5150pistolpete]

Because it is not. Rustoleum is the worst paint, ever! Putting higher quality paint over shit paint doesn't make it any better.

[@HB-wd8gp]

I think Rust-Oleum is the best paint ever. After spending hours of frustration with Duplicolor paint on my black truck, I gave up. The 8 Oz. cans are too small, way over-priced and inefficient. You paint a few feet and the can is empty. You have to get another can, shake it and continue. Further, the Duplicolor spray pattern is weak and uneven. After playing around with it for a while, I saw a can of Rust-Oleum black paint on my friend's porch and decide to give it a try on my truck roof. It worked great. I'll never buy Duplicolor again if I can find the color of my future trucks in Rust-Oleum. The only benefit of using Duplicolor is that they can match the color of your car using the manufacturer's paint code. I'll see how 2K Clear Coat comes out on Rust-Oleum. I took a chance on Rust-Oleum because I had to paint some old door hinges and they didn't look good using regular paint with a brush or roller. I then used a can of Rust-Oleum paint I had around. They came out smooth and beautiful. I think the key is getting the right version of Rust-Oleum and shaking the can for 2 minutes. I think most people shake it for 30 seconds, get tired and convince themselves they have been shaking it for 2 full minutes. I found a way on KZbin to shake them by attaching the can to a sawzall blade using 2 hose clamps. Works great!

[@8Bitplus]

God bless you brother! keep up the good work!

[@GlassWerx]

Car looks great. The color of aj engine bay is color I was thinking about redoing my car in. I saw it in his video before it looks hella good

[@JamesDguy]

Thanks and yea his bay is 🔥

[@GlassWerx]

@@JamesDguy yeah I was really thinking bout repainting my car n that color. But haven't been able to find it locally

[@harrish1978]

Great job . Peace be upon you.

[@jamesallen7093]

Iif you guys are gonna paint with rust - oleum get the 4 x turbo ! Has a 10" spray pattern , did my Chevy S - 10 with just 3 cans !

[@COU51N.Kyle.]

Fresh fresh fresh!! So sick

[@DaSesh]

so you cut and buffed this paint job in a previous video and now laid 2k clear on top.. was this done after the buffing and wash or just after the buffing? sorry at work and they hate that we use our phones so can only really watch and listen during my 15 min b reak thanks! god bless

[@JamesDguy]

I didn’t cut and buff it in previous video I just buffed it and in this video I wet sanded and added another color coat then let it dry then wet sanded it again and added clear. I make sure to wipe the car down with wax and grease remover or rubbing alcohol to get rid of any wax from buffing. Hope that helps

[@DaSesh]

@@JamesDguy thank you! For the clarification

[@CheesusSVT]

Done a few of these in my day, You sir are an artist. Would like to see how long it lasts to the elements. Looks nice! 😅Love some good ol' get in there and do it yourself... type content. 😸

[@chuckzamzow9]

I have used that 2k glamour clear on my trim piece s on my Honda great product, spraymaxx is the product👌

[@ThriftMachine]

The garage door insulation how well does it work? GoPro Firmware upgrade should fix the issue.

[@JamesDguy]

We did that and didn’t fix it. Also it works decent since the sun beats on it most the day

[@Vortec.Z32]

I've watched alot of the vids man love it, but I believe this to be the only one where u explain letting the paint aka bade coat cure a few days then wet sand 1k lightly then apply 2k clear. All the other vids I've seen you just directly add 2k on top after base no waiting? Is this somthing new you've learned to be a better overall outcome? And when your done wet sanding do u use wax grease remover or just wipe down with dry rag?

[@drewjames9167]

I think youve convinced me to paint my truck with aerosols.

[@Nperez1986]

Nice! Enamel and other oil based painted were used in the 50s and 60's...doesn't last as long in the sun. Urethane based products, ie. that 2K clear will last a lot longer and is what modern cards are painted with.

[@i11u5ion9]

Yes base coat, top coat.

[@jimpangindian5577]

Looks really good. God bless you more bro.

[@Prince_of_Catz]

That's awesome bro, to protect the clear coat though. buff with Menzerna 3-1, then use Ceramic coating to seal it. I use Gyeon Mohs.

[@blainebailey5641]

Do you have to run some of these paints top to bottom? Good work man these all look really good Keep making good content bro

[@ULSB1969]

It looks much better with the clear.

[@KneelMore_CacheTales]

I'm doing my Yamaha V-star right now but I'm using Krylon All-in-One paint with the 2K clear. The Krylon paint is less expensive but in my opinion a much better quality paint. That car looks sweet!

[@broncoramfan]

Just asking to ask how much cheaper if it is cheaper is using 8 cans vs buying traditional clear you sprsy out of a hvlp gun. Thank you for your time n great video once again

[@jordanbest3926]

Depends on the clear coat you want to compare it to. The 8 cans are pushing $160+. Gallon of sprayable clear from speedokote is going to range from $89-$159. The cans just simplify the process but I wouldn’t necessarily consider it a cheaper option UNLESS you’re buying all the equipment too.

[@JamesDguy]

@@jordanbest3926correct

[@JamesDguy]

Well using cans is quiet that’s why I went that route because a compressor is loud and the neighbors will report me but it’s almost the same price depending on the clear. The price of a gun, compressor, air line, water separator and clear is more expensive though.

[@broncoramfan]

@Moore Motorsports Garage I've seen you use a gun before so I know you know how to use it but I completely understand about the neighbor thing. I was just looking to compare the 2. Thank you for your response

[@kevindevlin5091]

Looks really great man, amazing job.I was also a dick in a previous comment in another one of your videos so i want to sincerely apolgize for that. Car looks awesome. Keep up the great work brother!!

[@AB-C1]

Nice job! The price is ridiculous expensive now though 6 cans £220! (That's about 280-290usd!! ) Shame was going to re-clear my BMW. Nevermind. 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

[@JamesDguy]

Here in the USA it’s like $120 usd

[@dennisrobinson8008]

I'm not finding a chart converting manufacturers color codes to rustoleum. Did you have that info?

[@naryanclaudy2116]

Sir. This is amazing, and my favorite color at that. So when you are done with paint, you wet sand then buff before the 2K?

[@MatthewRichey]

Looks great and God is so good.

[@derekshane8786]

Using rustolium 2x satin spray can. Should i or do i need to wet sand before i put on any 2k clear coat at all?? I cant spray the clear within the tacky time of the rustolium.

[@briansahli5428]

Looks great man!

[@M5JamesE39]

I f'd up and need your help 😢 Had three beautiful coats on the car using a rattle can last night but ran outta time to do the clear. Left it outside all day today in the sunlight to cure. Came home late this evening and wanted to get the clear on so I rescuffed it with dry 800, wiped with IPA, followed by glass cleaner and lastly a tack rag before I threw on a light coat again...and it's f'ing wrinkling randomly, which looks similar to what happens to paint after aircraft stripper is applied :/ At this point I'm skipping the clear until I can resolve this but I don't know how-to fix this or prevent it again when I do. Wait a week, a month and then try again? Please help!!!

[@NG-cf7zh]

You waited too long to clear coat, either clear coat after 30 minutes or wait 2-3 days. You can’t fix the wrinkles, unfortunately.

[@M5JamesE39]

I meant to, got on the last cost of color and then got rushed out the door for a surprise birthday party. I figured sitting outside in the sun for the day would be enough but it wasn't. Now it's been in the sun for a week, I'm busy this weekend, so if it fucks up next weekend, then just know a 3rd gen Prelude w/ an H22A swap will be burning to it's death lol.

[@wolfmode0061]

​@@M5JamesE39wrinkles can very easily be sanded off and re-sparayed once dried. Maybe the cleaning products didn't fully flash before you painted. Glass cleaner does seem a bit much as well. Harsh chemicals will give off toxic fumes that interact negatively with paint.

[@_Common_Logic_]

I'm sure you've figured it out by now, but to others going the same route; you've obviously got a TON of time and effort into the car by the time you've finished prepping and painting. It's about the least "fun" thing in the world by the time you are finished with an entire car... Don't mess it up by rubbing "glass cleaner" (whichever variation of ingredients may be tossed into your specific brand) into your fresh paint before trying to topcoat. You're only using a tiny bit of product for this stage, and they sell the right juice for the job... If you choose to find an "alternate" wax/grease cutter (for paintwork) research professional PAINTSHOP videos and not random guys using rattle cans with good luck and intention. Waking up in the morning just to see your beautiful finish has morphed into another week of work is heartbreaking.

[@McDzy]

love the vids and the verse! God bless brother

[@LuisUgarteUSA]

Well the clear coat 2k is the best but you do not need to warm it, it has two components that work very well and dry fast because it has a hardener!

[@optimoprimo132]

You did an amazing job! God Bless you! Your body work and painting through all the stages can be a spiritual meditation. Sometimes God in making us perfect as our Heavenly Father is perfect depending on how many bad life habits we have formed through sin needs to take us through various stages of disposition. He breaks our pride and sinful tendencies in order to give us a new foundation.(derusting tools, hammers, air needles, cutting out rust, hammer forming new panels, butt welding, grinding, fiber glass bidy fill, seam sealer, regular bondo) That is the most painful part of the process as we have to learn to trust the process, humble ourselves and let go of the old and accept the new. Then He can start on the refinement of virtue. (Sanding body fill, filling in pinholes, taping, primer, sanding, base coat, sanding, clearcoat, buffing and polishing)! And if you put in the time and good will or dispositions just as the car comes out stunning so we will come out of the process shining like the stars of heaven and become a light on a mountain for all to benefit! Excellent work!