How I Did it: P320 Clean with 50/50 alcohol/water Primer P600 Clean Color Wet Sand (P1500 then P3000 if you have at least 4-5 coats or used a gun) Wet Sand (P2500 and/or P3000 if you only managed 2-3 coats) Buff w/ Hard cutting pad and ultimate compound Polish w/ultimate polish Wax and/or Ceramic Spray (after about a week of paint curing) Materials used: 12 cans of Color - 2 coats 8 Cans of Primer- 1 coat
@finneganfun2705 Жыл бұрын
you forgot a 2k clearcoat!!! That is why you burnt through paint. You should have applied a 2k clear, than wet-sanded, buffed and waxed it. Still turned out REALLY good though.
@HazardGarage Жыл бұрын
@@finneganfun2705 in hindsight, I think a 2K clear coat would reallly have improved the quality and durability 100%. But since this was a bit of an experiment, using 2K clear cans would have put this project over budget (At the time). If I were to do this project again, 100% I would 2K clear it.
@kalithechamp1412Ай бұрын
They now have turbo cans that are much larger and a much wider nozzle. People love them and I’m tempted to try, especially seeing the succes with regular rustoleum
@HazardGarageАй бұрын
@@kalithechamp1412 I've heard! Not sure how many colors they have now, and I'd also be cautious about how much paint it would put out. Too much means runs.
@GiNnYmAnN3 жыл бұрын
I’m addicted to this build
@HazardGarage3 жыл бұрын
and the only cure...is watching more Hazard Garage videos. 😁
@crxvtec00693 жыл бұрын
Clear coat would give you a real nice gloss shine, and also give you a layer you can cut and buff to a mirror shine without worrying about burning into the actual paint. I have done quite a few paint spray jobs including the front bumper on my s2000 this way, I used the spray Max 2k clear on top of silver metallic paint match and it came out really super nice. Next time go two stage paint with clear will come out wayyyy better trust me. Still cool to see you do a single stage paint job, this is how they used to paint cars back in the day with no clear coat. I have an old 56 Vw that is painted like this. Very cool!
@HazardGarage3 жыл бұрын
Totally! I was considering doing a 2K clear but the cost to spray the whole car was creeping too high. next time around I might just paint it properly with a good quality clear out of a gun. Or spray paint and then gun on some good clear. =P
@apatcr8s3643 жыл бұрын
@Lovato Art.. how many coats of 2k did you do?
@BK-vj1oz Жыл бұрын
just out of curiosity can you actually clear over this paint? i had used rustoleum red spraypaint and i layed a clear over it 48 hours later and it all buckled and had a chemical reaction
@crxvtec0069 Жыл бұрын
@@BK-vj1oz you didn’t give it enough time to cure. The clear will act like a solvent and wrinkle all the paint if you don’t spray it in the right time frame. It’s best to leave each coat cure for a longer period of time that way it won’t react that way.
@BK-vj1oz Жыл бұрын
@@crxvtec0069 yes you are 100% correct I contacted Rust-Oleum yesterday and they advised me that I either have to spray the clear coat within one hour of sprained my actual base coat or I have to wait a full 48 hours. Thanks for the response though
@TasteofBlood2 жыл бұрын
Don’t ever use a gloss rustoleum color if you ever do decide to rusto spray bomb your car… use a flat or satin and 2k clear over that. It’ll last much longer.
@HazardGarage2 жыл бұрын
Good point. a 2K clear (after the rustoleum has cured) would/could create a really good finish! Just gets a bit $$$ lol
@ER_666_8 ай бұрын
How many cans of 2k do you think a small car like this would take?
@Upsidedownamericanflag8 ай бұрын
@@ER_666_probably between 6-10
@sleeks99397 ай бұрын
@@ER_666_6 -8 at best
@naailable3 жыл бұрын
Ur channel is mad underrated
@HazardGarage3 жыл бұрын
Thanks! Glad youre enjoying yourself!
@VastDesign3 жыл бұрын
That came out great! This video makes me want to paint my NA
@HazardGarage3 жыл бұрын
Thanks! It definitely turned out better than I thought. Still with its faults, but not bad lol
@robert71003 жыл бұрын
just make sure you put clear coat on it so it doesnt actually look like shit
@ohforgodsake8486 Жыл бұрын
This makes me very confident that I can spray my old mgb with cans 👍
@HazardGarage Жыл бұрын
Awesome! I would advise on adding a clear coat as well though for durability!
@jeffreylyons15313 жыл бұрын
Sick job bro, a light sand between color coats makes a huge difference for me
@HazardGarage3 жыл бұрын
I'm gonna need more paint lol
@MIKEH.7773 жыл бұрын
You did a great job especially for spray cans
@HazardGarage3 жыл бұрын
Thanks Mike! I am fairly proud of it for being a rattle can job. 😁
@Stormmaniac3 ай бұрын
It turned out great!! If I didn't see the video I would not have been able to tell that this was with a spray can.. forget the haters clear coat costs$$ and the prices today are crazy..
@tysonmorgan3463 жыл бұрын
That looks fantastic, ive got a 1952 ford F6 that I'm repainting the interior on. Love it
@HazardGarage3 жыл бұрын
Thanks! 😀
@davidfrank28242 жыл бұрын
OMG you did one hell of a job. If I did not watch you spray the paint from a can I would never have believed it. I really loved your paint booth. If wood wasn't $100 for a 2x4 these days I think you would have had an easier time putting up your walls. You definitely did the right thing by covering the top. There's a lot of dust and dirt and bugs that live up in the ceiling of a garage. To be honest I would have not thought of that until starting and having things fall onto my paint. I most definitely gave you a big old thumbs up and hit the subscribe button. I figured that's the least I can do when someone goes to the trouble of making a video to help show others how it's done. I'm looking forward to watching more of your videos. I'm going to go back from the beginning with your Miata and see all the things you have done with it. Again looking forward to watching your next video.
@HazardGarage2 жыл бұрын
Thanks! glad you found it enjoyable and much appreciation for the support!
@csi1392 Жыл бұрын
i painted my spitfire derusto regal red in the 80s still looks great
@briancbful3 жыл бұрын
Try using 2k clear nexttime! will wait for that!
@HazardGarage3 жыл бұрын
I was thinking about it but its $$$ for the cans. Maybe I shoulda shot the 2K clear out of the gun but that would be cheating on a spray can paint job right?! 😅
@KineticLatency3 жыл бұрын
@@HazardGarage It will also mess you up. Isocyanate is nasty stuff and whatever you see on KZbin a normal filter mask won't stop it getting in and hardening in your lungs.
@HazardGarage3 жыл бұрын
@@KineticLatency yeah ive heard that stuff is extra nasty for the lungs! The 3M mask I was wearing was rated for painting, didnt smell a single scent of fumes while I had the mask on. It worked great!
@KineticLatency3 жыл бұрын
@@HazardGarage I'd check the specific model on the 3M website first if you're thinking of doing 2k at some point as the last time I checked 3M did not rate any of their masks for isocyanate paints. In the UK the requirement is for an air-fed mask.
@HazardGarage3 жыл бұрын
@@KineticLatency this was the 3M mask I used for the spray paint job www.3m.com/3M/en_US/p/d/v000152119/
@TerrenciaVlogs Жыл бұрын
Very informative! Can't wait to paint my SUV deciding between Rust-Oleum smoke grey versus charcoal grey, great video.
@HazardGarage Жыл бұрын
thanks! If you can afford it, 2K clear cans would be the only thing I would do different! and maybe only primer spots that went down to bare metal or were repaired... 2k Clear: amzn.to/44CXCny
@Stormmaniac3 ай бұрын
That looks great! Will be starting my car this coming friday fingers crossed the weather holds lol, (update) the weather is not going to hold lol my luck, been put back for 2 weeks straight now, strapped for time with work..
@HazardGarage3 ай бұрын
Good luck! I will add, if you have budget for 2K clear, do it! They sell it in cans but it can get a bit pricey. You really only need about 2-3 coats. Make sure you wear full proper PPE though. 2K clear is uber toxic.
@jeffaul74872 жыл бұрын
You did an awsome job...it turned out very nice!
@HazardGarage2 жыл бұрын
thanks! not bad for some rattle cans right? 😁😁
@89GTFoxDude5 ай бұрын
Next time, try doing it with a foam roller and wetsand in between coats and final cut and buff 😎👍. Boat primer and paint is good too. Very tough and durable and boats are painted using the foam roller method.
@HazardGarage5 ай бұрын
I have heard of this! some one was able to get like mirror finish but it sounds like he knew what he was doing lol
@89GTFoxDude5 ай бұрын
@@HazardGarage Can be done for sure but it's alot of elbow grease wetsanding and buffing. The tradeoff is less masking, overspray mess, and spray equipment especially an expensive compressor. One negative is you are limited to solid colors, no metallics or pearls with the roller method for obvious reasons.
@chadfortman80982 жыл бұрын
Not bad for thin layer of paint . Enjoy your pink and orange car. I got red fit polish wax it . It fade bad because of red.
@michaelnobriga20322 жыл бұрын
From what it was and how it looks now great job my friend! 👍🤙🏻
@HazardGarage2 жыл бұрын
Thank you! Cheers!
@mrpistonrecaro64832 жыл бұрын
Looks great. Next time Will come out even better.
@HazardGarage2 жыл бұрын
always learning. always improving! 💪
@SerdsV3 жыл бұрын
legit, really good job.
@HazardGarage3 жыл бұрын
thanks!
@CorreiaXL Жыл бұрын
Should of wet sanded the primer with 600-800 grit before applying the base coat would of helped the 3000 knock some of the orange peal of the clear coat but came out good tho
@braintrust1214 күн бұрын
there is no clear coat…
@kimbarker96512 жыл бұрын
Wow...awesome job
@HazardGarage2 жыл бұрын
Thanks!
@TienBuilds Жыл бұрын
Luckily Rust O-Leum released a new 5 spray nozzle cans for better spray handling. And the 1 thing I’ve noticed not a lot of spray paint car guys use, 2K CLEAR!! best automotive factory results
@HazardGarage Жыл бұрын
if I were to do this again. DEFINITELY 2K clear. I resprayed my BMW M3 with cans and 2K clear had an amazing and strong finish.
@TienBuilds Жыл бұрын
@@HazardGarage drop a new project video, with Rust Oleum 5 spray nozzle cans and 2K clear. You’ll enjoy the results. The new can nozzle has fan spray which results in the best non professional spray gun results
@HazardGarage Жыл бұрын
@@TienBuilds thanks for the suggestion. If the opportunity comes up soon, I definitely will!
@ZioFrankekko Жыл бұрын
just a little tip: try using a clear coat over the base coat and buffing and polish that (i reccommend using a 2k clear coat since it's way more durable than regular one)
@JBHoughtaling Жыл бұрын
If I use a clear coat, would I still need to sand out the orange peel from the paint before I add clear? or will the clear hide the orange peel, and then I can buff and polish the clear coat?
@ZioFrankekko3 ай бұрын
@@JBHoughtaling sorry for the late responce lol just buff the clear
@JBHoughtaling3 ай бұрын
@@ZioFrankekko That's what I ended up doing lol, thanks
@philjones57283 жыл бұрын
Great effort with the spray cans, but you are always going to get lots of orange peel as the pressure from the cans is too low compared to a spray gun and compressor. It'll be interesting to see how the colour holds up under the summer sun! Red tends to fade more easily than most with out a clear coat. I was wondering why you didn't use a clear coat seeing how you went to a lot of trouble to build the booth and prep the car? It would have hidden some of the orange peel too. Really enjoying your series on the MX5 (sorry Miata!). Well detailed content with a splash of humour. I can't believe you don't have more subscribers!
@HazardGarage3 жыл бұрын
Thanks man! Spray cans definitely is a quick and dirty way to paint the car. I was curious, but not expecting too much and didnt want to add too much cost (because at that point a gun and compressor would make more fiscal sense). If I were to do cans again properly, I would spend the money to get a bunch of cans of clear to build a nice coat that is thick enough to wet sand and buff. I really think you can make it look pretty darn good, but i think the cost/benefit at that point starts to learn towards a compressor and gun. Also glad you're enjoying the build! Appreciate you.
@mikeopenshaw91283 жыл бұрын
Awesome improvement - great job - thanks for sharing!
@HazardGarage3 жыл бұрын
Thank you!
@oross40012 жыл бұрын
On my ford ranger. I am doing something similar to this except i am not using primer. I am sanding down the clear coat and only using primer on the spots that are down to metal. I am using gloss black and clear coat finish. Then a good wax. 👍
@HazardGarage2 жыл бұрын
yeah looking back, primer wasnt needed except for bondo and bare metal parts. If I were to do it again, I'd lay more coats and a thick clear coat. Also dont wax for a month or 2 to let the paint fully cure but you can use a non-sealing compound to give it some shine and cut back on some orange peel. Good luck!
@strattuner Жыл бұрын
everybody write in a call in and tell rustoleum to start putting all of their colors i a turbo can,that will just about take care of painting everything i own,including my motorhome,that turbo fan works real good,more colors rustoleum
@HazardGarage Жыл бұрын
turbo cans would definitely speed things up!
@strattuner Жыл бұрын
@@HazardGarage yeah its industrial paint,that's to protect their reputation,us asking for more colors is a win win
@katsyarissha48373 жыл бұрын
did this to my srt4 took 31 cans of pain 4 cans of sem clear about $100 worth of sandpaper and tape and 3 months cause I had work and was doing it all outside with no garage... it turned out ok but my car has like permanent static cling problem now lol
@HazardGarage3 жыл бұрын
painting is a lot of work especially w/out the right equipment or location. Dont know about that static cling though lolol
@randabuffer65622 жыл бұрын
You should have really waiting to just buy a gallon of single stage paint and use a compressor, take it from my years of using rusto lol plus it smells bad all summer here in AZ lol
@HazardGarage2 жыл бұрын
😅😅😅 Yeah after this experience I think I'll do that next time around.
@bearkamakana84872 жыл бұрын
Beautiful 🤙
@HazardGarage2 жыл бұрын
Thanks! Not bad for some spray cans I think lol
@hparkersd Жыл бұрын
The Miata has white primer. Supposed to make a difference. I have one which I am thinking about rattle canning.
@HazardGarage Жыл бұрын
I've done more research since this project and in my opinion you dont really need to primer the whole car. Just the parts where you had to do repairs like bondo or if you sanded down to the bare metal. If the original paint is rust free, just sanding it will be good enough for paint adhesion.
@akhir_s14843 жыл бұрын
Next time buy the Rustoleum Turbo Primer so you wouldnt have to buy so much cans. Otherwise good job bro keep it up
@HazardGarage3 жыл бұрын
thanks! yeah i think i remember seeing some examples of how much primer those turbo cans put out. definitely would have been interesting
@YoungSpartanAtletik Жыл бұрын
Love it
@anthonylewis63353 жыл бұрын
Did you use a clear coat at all or spray clearcoat?
@HazardGarage3 жыл бұрын
No clear coat as this was a trial run. Next time I'll probably use a clear coat for extra durability and extra shine and detail. Although Rustoleum says their advanced formula is supposed to be chemical resistant and UV resistant when fully dry.
@arnietwo113 жыл бұрын
Well done, but did you not to spray with a clear laquer after ?? Im restoring a 2001 merc slk and in the process of sanding and painting a front wing and front bumper. Im going over the paint with 2000 grit then spraying with the clear !!
@HazardGarage3 жыл бұрын
yeah i was trying to stay within a budget as well. With a good thick clear coat, wet sanding and buffing could have amazing results. Spray cans have a limitation!
@karen84173 жыл бұрын
Shit looks clean
@HazardGarage3 жыл бұрын
thanks my dude! You thinking about doing something like this in the future?
@karen84173 жыл бұрын
@@HazardGarage yea I’m wanting to buy a car with a crappy paint job and just do this
@jemainecorley40238 ай бұрын
Man. That came out dam good
@braintrust1214 күн бұрын
doing no clear coat is crazy. wont this last just like, a week or 2?
@HazardGarage7 күн бұрын
I had the car for like another year after and it was overall still doing good. I do park the car indoors though. Also I will admit rock chips seemed to effect the paint easier. Looking back, I def would have done a clear coat as well. I was trying to balance costs but in hindsight it would have been worth it.
@sergioa90973 жыл бұрын
Yooooo I've always wondered is a NY Fat Cap for graffiti would work good for painting a car haha good shit dude
@HazardGarage3 жыл бұрын
lol I had the epiphany when watching an artist do a mural and was like...wait a minute...
@sergioa90973 жыл бұрын
@@HazardGarage not to mention, high end graffiti paint cans Have high pressure cans for those "quick" graffiti tags haha combined with a fat cap can make for an interesting paint job
@HazardGarage3 жыл бұрын
@@sergioa9097 oh yeah ive seen those cans! Similar to the rustoluem turbo cans. But they lay a TON of paint lol
@nickp31734 ай бұрын
Why didn't you sand the filler primer?
@HazardGarage4 ай бұрын
I did off camera with 600 grit.
@brianrussell156511 ай бұрын
2x has good coverage better than turbo
@weeamkshash75178 ай бұрын
There are 2x spray cans, can they be used?
@HazardGarage8 ай бұрын
yes they can!
@axelaxel880711 ай бұрын
Is is still looking good? Or has some problems with the paint?
@HazardGarage11 ай бұрын
I no longer have the car, but for the year I owned it, the color held up well (I do park it inside though). I will say that if I were to do this again, I'd use like a 2K clear because the paint itself isnt as durable against rock chips as I would have liked.
@martinburke3623 жыл бұрын
You should have put a clear coat on it then sand down with 2000 grit
@HazardGarage3 жыл бұрын
yeah the cost was creeping up on how much i wanted to do with spray cans. but definitely a nice thicc clear coat would have allowed me to make this glass!
@8DTHEGAME Жыл бұрын
Hey man im following this exactly pretty much. I have 320 grit and im just starting to sand. The panels dont look as grey and sanded down as yours. I even ordered those foam pads. There are parts where you still see clear cloat with bubbles still in it. Do i just need tons of force to sand that off or am i doing something wrong?
@HazardGarage Жыл бұрын
you don't really need to primer the whole car like I did. Just areas you repair with like bondo or areas that go down to the metal. You'll want to sand until its feels smooth. Sanding by hand can take a while so just keep at it. Unless this "bubbling" is actually rust then youll need a harsher grit to sand the rust out. Then maybe even bondo to build it back up. If the rust has destroyed the metal then you might need to do some metal repair as well.
you forgot to mention the stuff you spend/use for buffing/polishing
@HazardGarage9 ай бұрын
Sorry had that stuff lying around. But I used like a $10 bottle of Meguiars Ultimate Compound and then another bottle of Meguiars wax lying around the garage!
@balloney21759 ай бұрын
@@HazardGarage Thanx!
@ecftube2 жыл бұрын
What happened to clear coat ?
@HazardGarage2 жыл бұрын
For cost reasons I skipped it. But if I were to do it again, I'd definitely do the clear coat.
@franciscomontesdeoca53163 жыл бұрын
Nice job sir. Can you send me the code for this can paint. Thanks.
@HazardGarage3 жыл бұрын
the color from Rustoleum is called "sunrise red"
@franciscomontesdeoca53163 жыл бұрын
Ok thank you again.
@fisktomte3 жыл бұрын
what about the clearcoat ?
@HazardGarage3 жыл бұрын
opt'd out of clear coat and just went with the single stage color. Adding clear coat definitely would increase durability and gloss but would get a little out of budget for this particular project. If I were to do this again I would buy much less primer (only needed it on bondo spots and bare metal) and spend that on clear coat cans.
@hvac_cano16933 жыл бұрын
How many cans of paint did you use
@HazardGarage3 жыл бұрын
I think I mentioned it in the video but in case I didnt it was around like 6 or so cans and like 8 cans of primer. I bought 12 cans total and didnt use all of them.
@dailydrivendiecast3 жыл бұрын
👍👍👍🌵🌵🌵
@HazardGarage3 жыл бұрын
😀🤙
@brianrussell156511 ай бұрын
Needs new uncut fenders
@davelindsley983811 ай бұрын
All the orange peel is probably the primer you didn't send the primer
@HazardGarage11 ай бұрын
I did sand the primer, but the orange peel is most likely just the limitation of rattle cans but almost maybe some other stuff lol. I'm no pro painter obviously.
@Whattsuptday602 жыл бұрын
Use ceramic coating to give it a nice finish and protection
@HazardGarage2 жыл бұрын
Love ceramic and Graphene coatings. amazing stuff!
@ogun_nandes5152 Жыл бұрын
Nice. I have yet to see someone can paint a car worth over 10k. Why?????
@HazardGarage Жыл бұрын
I figured if it didnt turn out as good, then I could always do it properly after. And I was curious to see for myself!
@thedriftjournal13782 жыл бұрын
curious how long it took to cure? Did you have to wait a while before doing the wet sand?
@HazardGarage2 жыл бұрын
I waited about a week. But I think itll depend on the paint you use. (dry time, usually like 1-2 days, but read the directions on your paint). Also, I wasn't able to wetsand too much because without a clear coat layer, the paint was very thin and I instantly burned through a couple spots when I tried to use 1500 grit. I highly recommend using a clear coat but know it can significantly add to the total cost).
@JG-cj4db2 жыл бұрын
No clear coat?
@HazardGarage2 жыл бұрын
no clear coat as I was trying to keep costs down. Although if I were to do it again, I would put a clear over it for durability. Clear is much much more durable from chips, dings, scratches and UV/weather. But in the future if i were to paint a full car again i'd spray it with a paint gun.
@JG-cj4db2 жыл бұрын
@@HazardGarage Came out good and clean though. Good job on it
@HazardGarage2 жыл бұрын
@@JG-cj4db thanks!
@erniesanchez9198 Жыл бұрын
How has it held up?
@HazardGarage Жыл бұрын
I no longer have the car but had it for about another year after this video. Color was still good but rock chips at the track got certain areas. If I were to do this again, I'd recommend a 2k clear coat. It adds to the cost ($20 a can....) but really only 2 coats are needed and it dramatically helps durability.
@daviddavid58803 ай бұрын
Aint nothin wrong with a rattlecan paint job. New supercharger, or paint some classist snob approves of? Hmmmm...
@KdohRR3 жыл бұрын
Welp my rsx is doomed
@HazardGarage3 жыл бұрын
🤣🤣🤣
@slobo55682 жыл бұрын
is the paint still holding up?
@HazardGarage2 жыл бұрын
still holding up in terms of fading or color, but if I were to do it again, definitely adding a 2K clear coat would be the way to go to make the paint job more durable to chips etc and chemicals. But at that point, buying paint by the quart or gallon becomes a bit more cost effective but if you dont got the space for compressor then this option makes a bit more sense.
@kevinmontoya73183 жыл бұрын
Daaaaang 8 cans, that's literally nothing in terms of spray painting, honestly, I'd be comfortable at 20 cans
@HazardGarage3 жыл бұрын
Yeah more cans would have been better for sure. Thicker paint for more durability. This was an experiment and an experience.
@miatamymind40523 жыл бұрын
You screwed up dude... you can’t sand color you need clear coat
@HazardGarage3 жыл бұрын
Thanks for watching! From my research, you can color sand single stage paints. The problem seemed to be my paint layer was just too thin (spray cans). If I could have laid some more coats I think it could have worked. 🤷♂️
@chrisbotham53313 жыл бұрын
Yes you can
@joeroe28393 жыл бұрын
Yea u can lol , it's like a single stage paint job ..
@steviefigs46773 жыл бұрын
No clear😳...😂
@HazardGarage3 жыл бұрын
@@steviefigs4677 too broke for clear lol
@chadfortman41624 ай бұрын
You should spent time on body work becuse paint job look good and would looked perfect if body was in better shape. Patients grashopper 🤪
@ihatecops.3 жыл бұрын
Next do it with a brush
@HazardGarage3 жыл бұрын
you know, I have always been curious about that method.. 🤔
@tanky9963 жыл бұрын
Just a noticed a light weight moan 1:36, for how good the car is going to come out