Steelmill Chip Flask Machining - CNC lathe, Vertical lathe, Turning

  Рет қаралды 360,005

JamesPark_85 Machining TV

JamesPark_85 Machining TV

Күн бұрын

Пікірлер: 214
@gresvig2507
@gresvig2507 3 жыл бұрын
No matter how good your machines get or how fancy the electronics, there will always be that one bit where it's easiest to just hit it with an angle grinder.
@pvtimberfaller
@pvtimberfaller 3 жыл бұрын
Clearly you haven’t been watching videos of the right machines.
@BigSkyCurmudgeon
@BigSkyCurmudgeon 3 жыл бұрын
most versatile machine tools ever...a big old grinder and a big f-ing hammer
@MatzeMaulwurf
@MatzeMaulwurf 3 жыл бұрын
@@BigSkyCurmudgeon Yankee-Galore!
@HitLeftistsWithHammers
@HitLeftistsWithHammers 2 жыл бұрын
@@BigSkyCurmudgeon tools for the refined man.
@rparker069
@rparker069 3 жыл бұрын
The blue on those finishing chips was the most beautiful thing
@mumblbeebee6546
@mumblbeebee6546 3 жыл бұрын
I like that you seem to apply the same meticulous precision to your hair ;) Thanks again for all these interesting videos!
@465maltbie
@465maltbie 3 жыл бұрын
It is amazing the inserts last the whole cut on the inside. Charles
@johnnytarponds9292
@johnnytarponds9292 3 жыл бұрын
Love the sound of the shovel on the machined walls. Good video!
@noahproblemo1257
@noahproblemo1257 3 жыл бұрын
Wow! If the job is big or heavy they give it to you. Well done.
@Ma_X64
@Ma_X64 3 жыл бұрын
I like the sound of the shavings on the shovel rubbing across the grooves from the cutter.
@lord_matto8660
@lord_matto8660 3 жыл бұрын
i just want a like uncut asmr version of stuff like this i dont know why but i find looking at stuff getting machined is just so satifying and relaxing
@imtired8004
@imtired8004 2 жыл бұрын
Do it for work then lol
@RobertLBarnard
@RobertLBarnard 3 жыл бұрын
I about lost it when the machinist used his tape measure! BTW - that sure looks like aluminum....right up until I saw smoke a blue chips! Ha, ha, ha.
@lonestar1775
@lonestar1775 3 жыл бұрын
Very interesting. I run a 120" Vertical in Pennsylvania, US. I mostly work on reverse osmosis pumps for the US Navy. Sadly since it is government work, I cant video it. Thanks for the upload.
@nathandean1687
@nathandean1687 2 жыл бұрын
well ask your bosses to record it ? is they say yes. long as it passes thier security checks. as in doesnt give a location of the plant. and is uploaded through a vpn with a location of say india then yes?
@poloska9471
@poloska9471 2 жыл бұрын
Interesting last name you got there
@lonestar1775
@lonestar1775 2 жыл бұрын
All video is restricted. The Navy won't let us film.
@BruceBoschek
@BruceBoschek 3 жыл бұрын
Great to see how you go about this. Very entertaining and educational. Nice big flower pots! :-)
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
Digitalis is good for big pots. Thank you, bruce!
@BruceBoschek
@BruceBoschek 3 жыл бұрын
@@jamespark_85machiningtv Also good for congestive heart failure! ;-)
@martinpalmer6081
@martinpalmer6081 3 жыл бұрын
Great work chap keep the videos coming
@RotarySMP
@RotarySMP 3 жыл бұрын
You get to machine some interesting parts.
@stevenmassey7586
@stevenmassey7586 3 жыл бұрын
Good looking finish, tight machine !
@Juzzy520
@Juzzy520 2 жыл бұрын
Good job!💪💪👍👍
@Toolmamon
@Toolmamon 2 жыл бұрын
Very nicely done!!! Awesome!!
@michaelade2823
@michaelade2823 3 жыл бұрын
brilliant job. i love watching your videos
@nikolaiownz
@nikolaiownz 3 жыл бұрын
Again an awesome video :) - some jobs just require a showel!
@TheAlfieobanz
@TheAlfieobanz 3 жыл бұрын
Great stuff, JP! Glad I found your channel.
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
I'm glad you watched my video. Thank you!
@conantdog
@conantdog 3 жыл бұрын
Beautiful work no matter what it is, 👌👀
@GlennChambers
@GlennChambers 3 жыл бұрын
Hi, please make longer videos :) I enjoy them. 15 minute is good.
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
There were many things I wanted to show you this time. That's why the video is long.
@radrestorations8598
@radrestorations8598 3 жыл бұрын
Wow very satisfying to watch.
@todddooley793
@todddooley793 2 жыл бұрын
That was cool to watch!
@BlueBeamProductions
@BlueBeamProductions 3 жыл бұрын
Oh my god. i did NOT know they made lathes that huge!
@stevo68
@stevo68 3 жыл бұрын
They come a lot bigger than that.
@Handleyman
@Handleyman 3 жыл бұрын
Great channel! I’ve just subbed with a bell. 👍
@grumpyg9350
@grumpyg9350 3 жыл бұрын
What a cool part and process.👍👍👍👍👍👏🏻👏🏻👏🏻👏🏻👏🏻
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
😄
@clayz1
@clayz1 3 жыл бұрын
I loved running the VTL, for about a 5 year stretch there.
@Clayton_WoodHelm
@Clayton_WoodHelm 2 жыл бұрын
The chips turn a beautiful blue
@burningnose5866
@burningnose5866 3 жыл бұрын
Super working, but why don't you install a vakuumcleaner...?
@Kei22
@Kei22 3 жыл бұрын
Nice work , and a really awesome machine, unlike where I work😀
@ML-jf1xe
@ML-jf1xe 3 жыл бұрын
I’ve read all comments but that nobody has a really good explanation of why this bucket needed to be machined bugs me to no end
@mumblbeebee6546
@mumblbeebee6546 3 жыл бұрын
Perhaps they are buying liners made from graphite or fire cement, and they want to have the closest fit to avoid stress in the liner when full of molten metal?
@ML-jf1xe
@ML-jf1xe 3 жыл бұрын
Thanks
@clintchapman4319
@clintchapman4319 2 жыл бұрын
Why does the casting have to be machined to that degree of surface finish to melt stuff in?
@trixrabbit8792
@trixrabbit8792 2 жыл бұрын
So why do you have the piece on pins instead of down on the table?
@lvxleather
@lvxleather 3 жыл бұрын
Pretty cool, it looks like a giant pot for a plant. What kind if steel was this made from? Also what model vertical lathe is this? It kind of looks like a Youji I worked with at a shop making impellers and large castings. I really grew fond of machining those big parts. Thanks for the video 👍
@paddlefaster
@paddlefaster 3 жыл бұрын
This is what abom watches when the misses isn't around.
@TheTonyMcD
@TheTonyMcD 2 жыл бұрын
1:40 How stable is that pot when moving it around like that? It seems like it should be way too easy for it to flip over and hit the ground.
@Bbonno
@Bbonno 2 жыл бұрын
They short straps keep it clamped, but the day longer straps are used something is getting a huge dent...
@larrym1448
@larrym1448 2 жыл бұрын
Very nice.
@ikesquirrel
@ikesquirrel 2 жыл бұрын
How many of those flip over while lifting???
@grantodaniel7053
@grantodaniel7053 3 жыл бұрын
I was thinking when machining out the bottom that the G-code for constant surface speed would save having to grind out the left-over spiggot. But I don't suppose 500kg of cast iron would really appreciate being spun up to a few thousand rpm, would it? 🤪😅
@grahambird1570
@grahambird1570 3 жыл бұрын
This isn't Cast Iron, it's Steel >>> Swarf !
@ZaphodHarkonnen
@ZaphodHarkonnen 2 жыл бұрын
It would have made for an epic video though. 🤣
@DolezalPetr
@DolezalPetr 3 жыл бұрын
fantastic work!
@tdw5933
@tdw5933 2 жыл бұрын
No cutting oil?
@Motor-City-Mike
@Motor-City-Mike 3 жыл бұрын
Reminds me of machining underwater oil well caps on a manual 192" VTL, all the sizing done with Pi tapes, no job to daydream on...
@shakeydavesr
@shakeydavesr 2 жыл бұрын
Now there’s a video that’d be cool to see.
@OttóKatona
@OttóKatona 3 жыл бұрын
I was really scared of this flask to tip over when you were lifting it up
@PoisonNuke
@PoisonNuke 3 жыл бұрын
that was an totally unneccary risk for shure. The damage would have been extreme and a simple strap could've prevented it.
@benroberts-sano4386
@benroberts-sano4386 3 жыл бұрын
yay smart comments
@PoisonNuke
@PoisonNuke 3 жыл бұрын
@@benroberts-sano4386 at least smarter than yours! I handle stuff like this all day and we have special equipment to handle unstable things like this!!
@benroberts-sano4386
@benroberts-sano4386 3 жыл бұрын
Sorry I could have bragged about my intellect and that I would never lift an item below its center of gravity particularly Only from 2 points. I'm gonna point it out that the operator is clearly skilledBut that many years of Is experience builds confidence and confidence builds complacency. improper strapping of loads because of The desire for expediency Is is a killer in many industries. its possible im wrong here and the tickness of the material at the bottom means the center of g is lower than it looks
@TBendez
@TBendez 3 жыл бұрын
Yeah, why didn't it tip over? Friction of the two straps against the bottom of the flask? Would a strap around the bottom circumference, over the side straps, rendered it safe to lift?
@bigcheezmoe
@bigcheezmoe 3 жыл бұрын
Is the unique hair doo and nice clothing outfit an option?
@santhoshkumar8774
@santhoshkumar8774 3 жыл бұрын
Super machining ....
@tinwizard6447
@tinwizard6447 2 жыл бұрын
Why machine the inside? is'nt it just holding chips?
@valj2957
@valj2957 3 жыл бұрын
Good job look great!!!
@georgeobrien7099
@georgeobrien7099 3 жыл бұрын
what country are you from
@Hendreh1
@Hendreh1 3 жыл бұрын
How do you lift your workpiece? It can flip over
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
It's dangerous, but I flip it carefully. To flip, tie the middle with a sling belt and flip it.
@Hendreh1
@Hendreh1 3 жыл бұрын
@@jamespark_85machiningtv thanks for the response
@cabanford
@cabanford 3 жыл бұрын
A simple loop strap around the top would solve the breath-holding I suffered watching that piece get lifted and swung into position 😬🙂
@josefornell2215
@josefornell2215 2 жыл бұрын
VERY GOOD
@TobiTrans
@TobiTrans 3 жыл бұрын
That's freaking awesome
@scania357
@scania357 3 жыл бұрын
Nice job James, is th
@rosewhite---
@rosewhite--- 2 жыл бұрын
braver than me to grip on such a little bit!
@rapsod1911
@rapsod1911 2 жыл бұрын
For what is used "steelmill chip flask" and why it need to be precisely machined? To me it looks like ladle for melted metal. Why waist so much energy to smooth inner surface?
@onymous5719
@onymous5719 3 жыл бұрын
18:46 How it’s smell like?
@onymous5719
@onymous5719 3 жыл бұрын
Maybe it’s toxic
@BigSkyCurmudgeon
@BigSkyCurmudgeon 3 жыл бұрын
@@onymous5719 it will fark up your sinus'es in a hurry thats for sure
@onymous5719
@onymous5719 3 жыл бұрын
@@BigSkyCurmudgeon lol
@MisterMarcus79
@MisterMarcus79 3 жыл бұрын
So I wasn't the only one that does not need smell-o-vision to know that smells like a sewer. I do have to admit I have run machines like that in the past, but now that i'm older that coolant is the very next thing on the job-list whatever the list actually says... or the boss... nasty stuff that's bad for tools, parts, machines and operators has got to go!
@mmabagain
@mmabagain 2 жыл бұрын
I was just waiting for that piece to flip in the crane. Seems awfully fast RPMs with just a tiny grip on the bottom. I would want a different set up.
@hahagagagaga4710
@hahagagagaga4710 3 жыл бұрын
What do you do to the chips?
@soberguy0
@soberguy0 3 жыл бұрын
What kind of shoes are you wearing in this video? Are they steel toe? If so where can I find them?
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
You can find on e-bay or amazon.
@petribomber1
@petribomber1 3 жыл бұрын
By the way, the way you measure the height of the worpeace, do you always have your G54 on the table?
@jamespark_85machiningtv
@jamespark_85machiningtv 3 жыл бұрын
Always. veryical lathe does not require multiple coordinate systems like MCT.
@petribomber1
@petribomber1 3 жыл бұрын
@@jamespark_85machiningtv I work on vertical 5-axis machine and we never do that. Guess that's just preference
@petribomber1
@petribomber1 3 жыл бұрын
That lift early at the video looks so scary. I wouln'dt be able to do that
@olegsei96
@olegsei96 6 ай бұрын
What is CAM system ? NX or SolidW ?
@jamespark_85machiningtv
@jamespark_85machiningtv 6 ай бұрын
Only hand, not use CAM
@olegsei96
@olegsei96 6 ай бұрын
@@jamespark_85machiningtv awesome 👍🏻
@zafaradeel2107
@zafaradeel2107 3 жыл бұрын
Why don't use electromagnet arm for chip removal????
@inhnamtranlam9779
@inhnamtranlam9779 3 жыл бұрын
Where are you from bro?
@N.g.Chanal
@N.g.Chanal 2 жыл бұрын
my advise all vasel fill with coolant..
@psk5746
@psk5746 3 жыл бұрын
Wondering why it needs to be machined in the first place?
@peachmelba1000
@peachmelba1000 3 жыл бұрын
Was asking myself the same question...
@mafferik6
@mafferik6 3 жыл бұрын
Why not use a vacuumcleaner for the chips ?
@b2dmastersniper
@b2dmastersniper 3 жыл бұрын
Theres probably 300lbs of chips sittin in there.
@mafferik6
@mafferik6 3 жыл бұрын
@@b2dmastersniper that would be an extra reason to do it with a vacuum
@elliottkrieter4640
@elliottkrieter4640 3 жыл бұрын
@@b2dmastersniper Well, one could mount a vacuum nozzle for continuous chip removal while machining.
@LuizCarlos-cj3nu
@LuizCarlos-cj3nu 2 жыл бұрын
Isto seria um cadinho para fundição?
@wizrom3046
@wizrom3046 3 жыл бұрын
Step 1; stand on the chuck Step 2; use a big shovel Step 3; fill two wheelbarrows with swarf Step 4; continue facing that side of the part
@caminojohn3240
@caminojohn3240 3 жыл бұрын
Not too sound ignorant, but it seems to me this relies on the bottom surface being absolutely flat. Any unevenness would change how far the top is to one side.
@bryanst.martin7134
@bryanst.martin7134 2 жыл бұрын
You should checkout EXAIR line of products, they have an airlift system that can clean that out in a matter of seconds. In fact, their business is designed to save big shops money by increasing efficiency and reducing air use at the same time.
@Gin-toki
@Gin-toki 3 жыл бұрын
What are those chip flasks used for?
@sstachura
@sstachura 2 жыл бұрын
Wine.
@ianskinner1619
@ianskinner1619 3 жыл бұрын
that whole pallet lift to table sequence was enough to get any normal shop shut down for the day for safety violations.
@ronsullivan132
@ronsullivan132 3 жыл бұрын
Nothing wrong with that lift. Rough castings are not the easiest to rig. Retired from place that made large pumps, the 100,000 gpm size. Our safety boss came from OHSA and did everything by their book. Make sure it is balanced before lifting, and then stand a safe distance away incase something does happen. Cut straps are a biggie with rough castings.
@slipstreamvids7422
@slipstreamvids7422 3 жыл бұрын
An awful lot of machine time and labor for what is likely just a trash bucket. I think its a container for either slag or for pigging out a ladle after pouring off sand cast molds. We had something similar in the gray iron foundry but much smaller. The large mass and smooth surface is necessary to prevent molten metal from adhering to it for easy removal by tipping.
@billsmith5166
@billsmith5166 3 жыл бұрын
I wonder why they're machined if they're just chip flasks?
@Cellottia
@Cellottia 3 жыл бұрын
Me too
@kisspeteristvan
@kisspeteristvan 3 жыл бұрын
Nice
@chalinp4886
@chalinp4886 3 жыл бұрын
Ultimate pot for carnitas Chicharon
@a-fl-man640
@a-fl-man640 3 жыл бұрын
multiply that chip cleanout by the number flasks and that's a lot of chips to deal with.
@Ma_X64
@Ma_X64 3 жыл бұрын
In the middle of the detail rotational speed the same as on periphery. Linear speed is low.
@manofausagain
@manofausagain 3 жыл бұрын
Maybe mill out the base next time?
@ericm8811
@ericm8811 3 жыл бұрын
Hey JamesPark_85 Machining TV! Thank you for the increased detail in your videos! When these parts are used at the steel foundry are they lined with fire brick or ceramics? Are they used to contain molten metal? Thanks a bunch! Ride ride ride!
@mumblbeebee6546
@mumblbeebee6546 3 жыл бұрын
He wrote that it was a “chip bucket” and all I could think of was bubbling fat and potatoes 😎
@supercharged6771
@supercharged6771 3 жыл бұрын
I'll buy your rigging technique if you had at least put tension on the upper straps to hold it tigjt but the current way is risky and dangerous, the odds are against you
@eprofessio
@eprofessio 3 жыл бұрын
Why not just leave the cast raw since it is just a flask?
@manueldasilva8794
@manueldasilva8794 3 жыл бұрын
Wouldn't a strong magnet remove all them chips at once
@grantodaniel7053
@grantodaniel7053 3 жыл бұрын
Exactly what I was thinking...
@MisterMarcus79
@MisterMarcus79 3 жыл бұрын
yes, but... if the magnet then (nearly) touches, the magnet will stick itself to the part. There are handheld magnetic sticks for jobs just like this, but this much metal is faster done with a shovel or pitchfork. Magnets are not your friend when parts are still there, only when there gone...
@ЕвгенийПрохоров-э2с
@ЕвгенийПрохоров-э2с 3 жыл бұрын
Рисоварка?
@darrellfinstad8205
@darrellfinstad8205 3 жыл бұрын
Why?..... What is the point of machining this thing?
@the_even_toed_ungulate.
@the_even_toed_ungulate. 3 жыл бұрын
Measure thrice Mill once
@Glasher1
@Glasher1 2 жыл бұрын
16:00 I was halfway expecting to see a magnet, not a shovel.
@robertriquelmy7193
@robertriquelmy7193 3 жыл бұрын
Thanks for the text
@bobweiram6321
@bobweiram6321 3 жыл бұрын
No Mori Seiki? I think I know why!
@TheFeller1554
@TheFeller1554 3 жыл бұрын
18:20 Hey I think you are recutting chips! Should have left the coolant on then you could do some submarine machining! LMAO
@iamtyzed
@iamtyzed 3 жыл бұрын
17:39 money 🤑
@lapphan8926
@lapphan8926 3 жыл бұрын
👍
@backho12
@backho12 3 жыл бұрын
Wow, some really negative remarks thrown at you! Hopefully, you’ll ignore all of the bad manners and continue with your good work!
@solstar4778
@solstar4778 3 жыл бұрын
Wow !
@portalviewaustralia2684
@portalviewaustralia2684 2 жыл бұрын
Dangerous slinging from the bottom.
@Horizontreecare
@Horizontreecare 3 жыл бұрын
5 seconds to put a strap around the casted part so it wouldn't flop into lathe.
@quantum_beeb
@quantum_beeb 3 жыл бұрын
They measure those jaws with a tape in like 1 second haha
@loyeantleyjr.8646
@loyeantleyjr.8646 3 жыл бұрын
😎🙂😎
@paulperrin2152
@paulperrin2152 3 жыл бұрын
Should have shown how how you turned component over
@Ozmala1
@Ozmala1 3 жыл бұрын
The way you lift those things is a accident waiting to happen 😔 Please secure them somehow from falling over. A little nudge to the part and the friction of the straps isnt enough to hold it upright.
@Ozmala1
@Ozmala1 3 жыл бұрын
And i do know a little about lifting steel structures and parts. I plan hoisting of steel structures and parts anywhere from few tons to over a thousand tons.
@BigSkyCurmudgeon
@BigSkyCurmudgeon 3 жыл бұрын
@@Ozmala1 i agree 100% that lurching of the hoist was nearly enough to cause the part to tip off balance. it will bite somebody eventually
2.5ton Steelmill part high load machining - CNC lathe, Vertical lathe, Turning
15:50
JamesPark_85 Machining TV
Рет қаралды 223 М.
300ton Force, Cylinder Body Machining - CNC Lathe, Vertical Lathe, Turning
11:55
JamesPark_85 Machining TV
Рет қаралды 305 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
2500 Ton Forging Machine Die Machining - CNC Boring, CNC Milling, Forging Machine, SKD61
10:07
Wheels | Bronze Bushings | CNC LATHE Machining
17:40
Chris Maj
Рет қаралды 41 М.
The bronze impeller is made on a lathe.
13:42
Олег Певцов
Рет қаралды 4,2 МЛН
Idler Axle | CNC Lathe Machining | KENNAMETAL FIX8
16:48
Chris Maj
Рет қаралды 50 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН