Hi. This product is a cylinder body that generates 300 tons of force. Thanks for watching!
Пікірлер: 119
@olevjorgensen2 жыл бұрын
It is always a pleasure to see a professional work, and see the result of his work.
@BruceBoschek2 жыл бұрын
Thanks for sharing this James. It is always interesting and informative to see your work.
@robertsawyer16332 жыл бұрын
Nice to see you deburing. You just trust the machine and the programer!! All the best & thanks.👍🇬🇧
@captcarlos2 жыл бұрын
Bloody heavy anyway! I was keen to see the outside machined as well. Thanks for the vid.
@elanjacobs12 жыл бұрын
Always love to see such big parts, you make chips bigger than some of my parts lol
@simon30652 жыл бұрын
Great video, thanks for sharing
@trustaskinnycook6102 жыл бұрын
Thank you for the content. It is great to see a wide range of product machined on this channel.
@krisflood57342 жыл бұрын
I just can't get enough of this shit. I love engineering, manufacturing, machining ,process and procedure improvement. !! Good stuff.
@Vik_ru2 жыл бұрын
Хороший продукт. Молодцы, что выпилили.
@teamidris2 жыл бұрын
Nice machine, especially the bridge.
@CSGATI2 жыл бұрын
I did stuff like that, Gravy job. That was a big one.
@fernandopires83022 жыл бұрын
Fantástic Job !
@cmoudyrybicka2 жыл бұрын
How did you dial the second side of the piece work? You have to have some machined OD diameter from the first side to get some reference for machining an opposite side. I didn’t see that in your video!!!???
@brendanseviltwin2 жыл бұрын
I would use old firehose from a local fire department or old cut straps to protect your rigging from sharp edges. Seen a guy drop a 25k lb rock crusher casting cause of it.
@hamaratbaba2 жыл бұрын
TEŞEKKÜRLER
@davenicholson34912 жыл бұрын
I like the interesting jobs and work pieces you work with mate! You clearly have great skills 🤙🏻💪
@wjamesm10012 жыл бұрын
Machining castings is always fun , there is usually a ton of stock to remove to get to final size , Sometimes it's a balancing act to make sure there is plenty of material to remove on all machined surfaces . We used to have a VTL were I used to work but it never ran much and they sold it before I got to operate the bigger machines . I used to run alot of casting and weldments on my machine a 6 inch G&L Cnc horizontal boring mill . 3oo tons is nice but the hydraulic extrusion presses we built were 1800 to 4500 ton aluminum and brass presses .
@MajesticDemonLord2 жыл бұрын
Grandpa Machinist meanwhile is saying "back in my day, we used to lift these one handed"
@Juxtaposed1Nmotion2 жыл бұрын
Is the part really running out round by 10mm? Doesnt seem like the machine can do eccentric cutting?
@TalRohan Жыл бұрын
The part has had all the forge scale ground off by the looks of it, how destructive to cutters is it?
@lonnieporter85662 жыл бұрын
" . . . trust the machine." That was always the hardest part for me. Too many times the program was messed up when it hit the floor.
@yak-machining2 жыл бұрын
That cylinder can generate 300tons of force, its not the weight of the billet itself lol
@BedsitBob2 жыл бұрын
I did wonder, when I saw the title. I thought "it's pretty heavy, but, there's no way that's 300 tons."
@donaldo19542 жыл бұрын
Thanks, I was trying to get my brain around that and couldn't resolve and almost went into a embolism!
@quantumlife65012 жыл бұрын
Always fake titel
@stefantretter8935 Жыл бұрын
300kg... is ok
@rlikemoney2 жыл бұрын
How much weight did you cut off that original forging?
@yajtramer69132 жыл бұрын
Awesome
@thetruthexperiment2 жыл бұрын
I love the amber monitor
@erwanrc81172 жыл бұрын
How much conicity do you get on those very deep bore ?
@user-ie2qw6ce9e2 жыл бұрын
Превосходно!
@TellURide4472 жыл бұрын
Damn what operating system does that thing use? Windows 3.1?
@TheDayzman2 жыл бұрын
Did you ever lose the fear of damaging something when lifting out finished product this heavy?
@uraltermosvar2 жыл бұрын
Great video! I also work on a CNC machine as an adjuster-programmer in Russia, only a turning group. Thanks!
@noormohamed40872 жыл бұрын
I am also CNC machinist India Chennai
@WHEREVER-I-ROAM2 жыл бұрын
I like BEER
@excitedbox57052 жыл бұрын
Why not mill the inside with a helical tool and get the whole thing done at once?
@wizrom30462 жыл бұрын
What country is this?
@backho122 жыл бұрын
Another good video! Less than 24 hours since posting and already over 7,200 views! You forgot to mention that you changed from the larger Richards VBM to a smaller more modern machine. Is the Richards a retrofit machine?
@jamespark_85machiningtv2 жыл бұрын
Yes, it is! It was a manual vertical lathe, but it was converted into a cnc lathe.
@backho122 жыл бұрын
@@jamespark_85machiningtv Almost looks like the crossfeed screws are still an Acme thread and not a ball screw. Good machine for roughing, but probably doesn't have the RPM's for finishing or smaller diameters.
@crazycooterMN2 жыл бұрын
Anytime you do your debuting with an angle grinder it's a good day! Edit: deburring. Damn auto correct!
@emrfixit2 жыл бұрын
What about the rest of it?
@loukola53532 жыл бұрын
Using canned cycles for an irregular shape casting is just wild.
@stoynostoynov18532 жыл бұрын
more likely 3 tons us or metric. At ~8 ton/cub m, 300 tons are more than 30 cub.m or over 1000 cub.ft
@aleksandrrr2 жыл бұрын
Its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@theofficialczex17082 жыл бұрын
It's designed to handle 300 tons of force, not weigh 300 tons, Stoyno.
@ianmorrison67982 жыл бұрын
It always boggles my mind how they used to do stuff like this this 200 years ago without Tungsten Carbide tools and a C.N.C. Sand castings wear the Toolsteel Tools out so fast. And yes I know it was done by hand on a BIG Boring machine, but, how did they make the Big Boring machine in the first place......mind boggled.
@stevenmassey75862 жыл бұрын
Machinist is the answer to most of your questions
@thetruthexperiment2 жыл бұрын
What’s it for!!!!!
@justinl.35872 жыл бұрын
People aren’t grasping the 300 ton part of the cylinder. It obviously has to do with the internal load pressure that generates 300 ton of force.
@aleksandrrr2 жыл бұрын
Yes in a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@GSM-SM2 жыл бұрын
300 Tons? Surprised ! Or 300 kg ?
@ewaldknapp7222 жыл бұрын
300kg not 300 tons
@RobertWilliams-mk8pl2 жыл бұрын
The machinist is 50 feet tall and yes the billet is 300 tons. This video is in Texas
@Gameboygenius2 жыл бұрын
And when you're talking about a 100 ton hydraulic press, the press clearly weighs 100 tons. 🤔
@matejkumer6152 жыл бұрын
@@Gameboygenius these piece is 10ton max
@Gameboygenius2 жыл бұрын
@@matejkumer615 I think you missed the point...
@aleksandrrr2 жыл бұрын
its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@jeffreyharter96172 жыл бұрын
That’s funny. So he’s talking about the piston strength not the billet weight?
@tommiers27382 жыл бұрын
Pucker moment is when you can see and it starts machining. Please don’t crash!
@imksa2 жыл бұрын
After using google. This is a cylinder body lifting weight of 300 tons.
@user-zc7cz1pc3i2 жыл бұрын
сдрассьти... чего , чего 300тонн?!?
@DanielSouza-bw8ef2 жыл бұрын
Traduzem os comentários
@CarterWHern2 жыл бұрын
3 ton
@rob889webster52 жыл бұрын
What a load a hit eh
@henryzarate92752 жыл бұрын
Toilet bowl for the giants, lol
@Markmoorcroft12 жыл бұрын
Biggest air rifle pellet I've ever seen
@huathai82042 жыл бұрын
I'd like to see the gun shooting that BB pellet!
@luisfernando-mm3jt2 жыл бұрын
Like your vidros and subscribed but that metal piece weights 300 tons really its an 747 Boeing
@mrjibrhanjamalkhan2144 Жыл бұрын
Yes it is
@JB823742 жыл бұрын
3000000000000 Ton?
@user-cm1eu6ct3k2 жыл бұрын
good
@johnnytarponds92922 жыл бұрын
That toilet weighed too much. Damn.
@Kremlins2 жыл бұрын
10mm is 1km to james park :-)
@kenmcclure45622 жыл бұрын
300 or 30 ton ?
@jimsvideos72012 жыл бұрын
300 tons of force I think. 12" ID gets you that at about 5000 PSI which is plausible.
@chris-graham2 жыл бұрын
300 stone 9:32
@jamespark_85machiningtv2 жыл бұрын
It is a cylinder that generates 300 tons of force.
@user-vz6iu7py1z2 жыл бұрын
Рrobably 3000 tons, or even 300000?
@lotharzimmermann75893 ай бұрын
@lotharzimmermann7589 @lotharzimmermann7589 vor 0 Sekunden Du verstehst das nicht.
@car91672 жыл бұрын
That's not looking like 300ton. 300ton is 38 cubic meter of steel, a cube with more than 3.3 meter per side
@Stefan_Boerjesson2 жыл бұрын
Big boys, big toys.. Impressive work.
@davidwaller22182 жыл бұрын
People here are saying that's more like 3 tons.
@hassanmonnoo5572 жыл бұрын
No way in hell that is 300 tonne. Maybe 3 tonne
@aleksandrrr2 жыл бұрын
its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@victimovtalent60362 жыл бұрын
Really?300tons?🤔
@aleksandrrr2 жыл бұрын
its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@eappenjacob18942 жыл бұрын
This piece is not more than 3 tons..
@antongyrt48142 жыл бұрын
Чего, какие 300 тонн, вы случайно на два нуля не ошиблись? 😂
@lotharzimmermann75893 ай бұрын
Du verstehst das nicht.
@earleclemans48362 жыл бұрын
That is a weird tape measure.
@peek2much32 жыл бұрын
300tons? Yeah sure!
@hkn.892 жыл бұрын
You mean 300 kg
@airgunningyup2 жыл бұрын
when you turn on the machine , you wonder what unemployment is currently paying if the gcode is wrong .
@seimela Жыл бұрын
maybe 3 tonne not 300 tonne
@GSM-SM2 жыл бұрын
The lifting systems and size and shape of job prove that it should not be 300 tons.
@chrism40082 жыл бұрын
Its not the weight of the part, its the force that hydraulic cylinder will be able to create once its finished
@joostvelders66412 жыл бұрын
3 ton grams
@juanantonio28272 жыл бұрын
Eso no pesa 300 ton ni de coña!!
@mfs54932 жыл бұрын
Yore speling is sumtimes terribel-
@jamespark_85machiningtv2 жыл бұрын
sorry
@opendstudio71412 жыл бұрын
@@jamespark_85machiningtv You can tell by the spelling style in that comment, M F S was trying to make a funny joke. Not a criticism. 😉
@MariuszCuch2 жыл бұрын
300t? this machine doesn't weigh that much , not to mention the cylinder
@aleksandrrr2 жыл бұрын
its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@MariuszCuch2 жыл бұрын
@@aleksandrrr A ton is not a unit of force; en.wikipedia.org/wiki/Force#Units_of_measurement If anything, a ton-force. The title is misleading.
@aleksandrrr2 жыл бұрын
@@MariuszCuch nitpicking, in everyday speech it is perfectly normal to use ton as force, even engineers do this.
@195019522 жыл бұрын
At the 5:33 mark it shows a 5 ton hook lifting a "300 ton cylinder body" unbelievable
@aleksandrrr2 жыл бұрын
its a hydraulic cylinder, if the piston diameter is around 400mm and you have a oil pressure of 250 bar it will push a little over 300 tons.
@EvgTiakaExT2 жыл бұрын
False for fools.
@floydgould44012 жыл бұрын
What a load garbage. I operate a 300ton digger and its huge. That billet is probably more like 30 tons
@killmimes2 жыл бұрын
Horrible casting...looks like part of the mold broke while placing the core within the mold...you probably have sand inclusions in the casting
@karlheinz44692 жыл бұрын
Yeah and the dude nearly weights a hundred tons.
@maxdamage19832 жыл бұрын
Don't take this the wrong way, but your machine has more chips laying around than a Lays factory.. Clean your workplace, a happy machine is a clean machine.