JAMG HE Engineering, Standard+ and Water Washable resin through the testing gauntlet #4

Comparing JAMG HE vs the competition with pull,push,drill tap and much more testing.
FT. art engineering,water washable and standard +
Are all resins created equal?
Big thanks to JAMG HE for providing their resin line up to test.
You can find there products here:
www.jamghe.com/collections/3d...
Like the testing? Like,comment and share the vid.
You can support my work doing the following:
Become a member to support future videos for only 1€ here: / @noizieworks
Buy me a beer 🤟 www.paypal.com/paypalme/ognoi...
Or help me out for free by subscribing and liking the video! THAAAAANKS
★ FOLLOW ME ★
/ noizieworks
/ noizieworks
Timeline:
intro 0:00
About the series 0:26
About JAMG HE 0:42
DISCLAIMER 1:05
Smell test 1:16
Print experience 2:16
Warping 8:02
Pull test 9:51
Push test 10:35
Stiffness test 11:17
Drill and tap test 12:04
Results and conclusion 14:07
#jamghe #resin #gauntlet

[@kursor6127]

Great tests. Thanx!

[@appleorange34]

Really like what you are doing with theses videos series. Thank you for the videos. I love msla printers but want functional parts so theses videos are perfect.

[@NoizieWorks]

Thank you!!

[@mohisubscriptions900]

Man’s casually inhaling toxic chemical fumes for our enjoyment and testing. Subscribed to you brother lol

[@NoizieWorks]

Casually is a big word but it's a valid reaction.

[@mohisubscriptions900]

@@NoizieWorks lol thank you for the videos. I was expecting sirayatech to be the best based off what I’ve read but it’s amazing that these are “better” at strength and durability. Also expected that water washable resin is brittle and cannot handle any pressure which was disproven. I guess Reddit is not the be all end all and empirical data does matter.

[@NoizieWorks]

@@mohisubscriptions900 I'm getting surprised alle the time myself because of "reddit" like posts 😅 had to eat my own words on this one 🤷‍♂️ thanks for watching!

[@user-kv7ef7bn9c]

wow super~~nice ! 😀

[@Rapidlaser]

Eryone resins are worth a look, they are CMYK so you can mix your own colours, I use them a lot.

[@NoizieWorks]

Thx for the suggestion!

[@NoizieWorks]

What brand would you love to see next? Anycubic? Maybe it's not all that bad right 😅 make sure to leave a like on the video!

[@retromodernart4426]

Nova3D Water Washable Grey, you might be surprised... Just bought the Art Engineering because of you, from your link,

[@NoizieWorks]

🙂 thanks for the suggestion!

[@RoninTurkey]

3Dmaterials. No one ever talks about them, but they are competitively priced and from what I've seen/used they seem pretty good. Though seems like their water washable actually does better when cleaned with IPA.

[@retromodernart4426]

@@RoninTurkey SuperPP for the win, better additive than Tenacious.

[@RoninTurkey]

@@retromodernart4426 It's what I use too.

[@robclarke1098]

I would love to see you test some JAYO resin. Word is that it is a subsidiary of SUNLU, but I would love to see how it stands up.

[@NoizieWorks]

Noted!

[@articloper8581]

Would be interesting to see tests on the rest of Anycubic's offerings. Are they all mediocre, or is it just the compromises of plant based resins in general letting down their eco resin? They are also one of the cheapest brands, in the UK at least, and I imagine a lot of people use them if they bought their printer from Anycubic.

[@NoizieWorks]

THAT is the big question 🙂. They are not answering any of my requests(i wonder why) so looks like i will have to buy it😅

[@D-One]

Regarding the warping: Does it happen before or after curing? At what stage do you remove the supports (before or after curing) and does that make any difference?

[@NoizieWorks]

In my experience warping can start from the minute you remove the prints from a support or it can happen days after curing. I take them from the supports after cleaning in ipa and cure them. Then i wait for more then a week before i start my video to see what the resin is doing. The curing imo is only to remove surface resin that doesn't get removed during cleaning and doesn't have a real other benefit. But if you leave them to long like hours the resin will start to break down. But that's my opinion as others will claim otherwise. I even have a brand saying that curing after cleaning is not needed as it will only yelow prints 🤷‍♂️

[@D-One]

@@NoizieWorks Oh, interesting, that's useful info, thanks so much. Now I am wondering if leaving it with the supports for a few days might help keep the shape and avoid warping.

[@NoizieWorks]

@@D-One worth testing some day!

[@AkalaFPS]

please test some of the significantly stronger resins like phrozen's nylon-green tough

[@NoizieWorks]

Thanks for the suggestion, i know who makes phrozen resin and doubt it will be more stronger but only 1 way to find out right 🙂

[@AkalaFPS]

@@NoizieWorks From the videos I've watched it seems to be one of the strongest but I haven't been able to test it yet. I'm currently searching for the perfect resin for a custom gaming mouse. Ideally I'd have a very stiff and hard resin that isn't brittle. I thought that phrozen's would work but I've only seen one decent YT video demonstrating it's properties. If you'd include it in one of your video's that would be awesome. There aren't a lot of videos on it so it might also be good for you to have one of the only up to date and high quality videos on that specific resin. Would you mind sharing who makes the nylon-green tough for Phrozen? Thanks for responding!!

[@VashGames]

Was the art engineering resin printed at 40-50C? Went to the website to look at the spec sheet and that's quite the temp.

[@NoizieWorks]

That's the temp i use to heat everything up on almost any resin before i put it in the printer (i have a heated enclosure) after that i let the printer do it's thing and the temps stay around 25-28c

[@VashGames]

@@NoizieWorks Thank you for the information.

[@perche26]

what exposure time do you use with the art/engi?, look very promising for minis.

[@NoizieWorks]

Not sure been a while but i think around 2.6 sec but like always do some calibration tests

[@perche26]

Thanks for the reply, I am now using chitu conjure standard 8k with siraya tenacious, 80/20% and neither reverie is as flexible as the videos I have seen of this art/eng.

[@NoizieWorks]

@perche26 yeah it's a great resin but you might want to take a look at the last resin video from the nova 3d line up😉

[@OctavioAH]

this Jamg He looks like the Chitu Conjure Sculpt. Its the same?

[@NoizieWorks]

Chitu resins are produced by jamg he so it's going to be very similar

[@KalastajaSawosta]

I bought JAMG HE Engineering resin and it´s new to me so could you help me with setup that you use. i have anycubid m3 premium

[@NoizieWorks]

Most important things is heating it up to 30+c and give your prints a 1,5 to 2 seconds rest before exposure. In chitu it's called rest time after retract. If you do this you should be good to go

[@junilupu1112]

Any testing done on Resione K resin?

[@NoizieWorks]

Nope not yet 😉

[@NoizieWorks]

Here is a little update for you, looks like they are game 🥼🤓

[@hahatran-nv2cm]

In my country JH art e- only 18-20$

[@NoizieWorks]

That's a steal!

[@hahatran-nv2cm]

@@NoizieWorks bc we are near china's border😂

[@NoizieWorks]

@hahatran-nv2cm cool!

[@hohhan1978]

1:04 is it spoiler fo Phrozen?)

[@NoizieWorks]

I can neither confirm nor deny that this is a spoiler 🙂 🤫🤐

[@pk6336158]

Nice video, I enjoyed it. Can you Test eSun Hard Tough resin please? Here are some videos for reference: kzbin.infoAlyO2cZEO-o kzbin.info/www/bejne/oKbNeaNrmNeIaLc

[@NoizieWorks]

I plan to test them all!

[@pk6336158]

🤩@@NoizieWorks