JANDY CS FILTER TUTORIAL

[@jamesryanharbour1602]

Simple Video 🙏 Love Jandy Equipment except the filter lid and drain cap. It’s 50/50 for me to screw them on correctly because theirs always a drip, magic lube saves the day.

[@watchmesk8betta]

So how do you avoid it dripping? What’s your preference is it tightened more aggressively or more moderately? A lot of filter casings actually need some what of some room to rise against the pressure. This type of system always gets me.

[@watchmesk8betta]

Sir how do you lube the seal on this type of filter casing? The seal is inside the threads and can’t be reached like normal filter casings! Thanks Spencer

[@PoolCareWorld]

its actually quite difficult without removing the ring entirely if not that I typically put a dollop of lube on a flathead screwdriver or the back of the magic lube tube and circle it around the ring not perfect but it works!

[@seff5677]

When you fully release the air before unscrewing the filter housing do you still need to drain it from the bottom? On my system I unscrewed the air purge cap and let it all and out and I hear all the bubbles wooshing through the pipes and I open the filter and there’s no water inside very little on the bottom almost nothing. This probably isn’t good I must have a leak somewhere ? I have the same CS jandy filter unit

[@PoolCareWorld]

When you open air release you create a siphon back to pool so water should drain out hopefully that helps