Janobike T85 installing steering damper

This video is an example of the way I did the assemble of the steering damper on my Janobike T85. I saw a lot of videos some of them much better than mine but all different, I wanna put mine this way and Im expalinning how I did it and the material I used will be described below:
1 x Screw M8x70mm
1 x Screw M8x50mm
1 x Screw with the round ring (Arola) M6x50mm
3 x Nuts M8
1 x Nut M6
1 x Washer M6
2 x Washer M8
2 x Unions M8
2 x Unions M6
1 x drill 6.5mm
1 x Threading male M8
Thank you

[@swisstoni2913]

Really ingenious. I've cherry picked your ideas. I'm doing just one thing different. I'm buying 2 conical nuts. m8. galvanised. Cheers mate.

[@Nuno_Tomas]

Thank you buddy...

[@sogor123]

Thank You verry much ! It was soo easy to mount the stering damper becouse of Your explanation. Big LIKE ! THANK's !!!

[@sogor123]

I go at the shop and i buy all the components and measured in comparation with your hand. hehe

[@Nuno_Tomas]

@@sogor123 Thank you very much for your kind words. This is exactly why I made the vídeo for. Cheers and safe rides.

[@Vaggelis__bo]

Yeah!!!! Well done my friend!!! Keep up the good work!!! I like your videos !!!!! 🤗🤗💪⚡️🦾🙌

[@Nuno_Tomas]

Thank you my friend...

[@jcrakpilot]

Thank you so much Nuno! Nice explanations! I will try in the same way you did it.

[@Nuno_Tomas]

For me its perfect. Thank you...

[@OfficalFitAspire]

You do it?

[@timpriestley8997]

good job pal, great instructions!!!!!!!

[@Nuno_Tomas]

Thank you...

[@alexlyndhurstfreesuge5532]

​@@Nuno_Tomas Hi bro, I've just purchased an Ultron T128, it didn't come with a damper and I can't find one specific for my scooter, can this be done with any scooter ?

[@Nuno_Tomas]

@@alexlyndhurstfreesuge5532 hi. Yes it can be done with any scooter. And if your scooter is similar to this you can make like I did.

[@indiano1964]

Hello Friend. thanks for the video. finally I will be able to install too. can you show me how the column closes? that is, I would like to know if. it can be closed now that the steering damper is installed. thank you

[@Nuno_Tomas]

With the steering damper in this position you cant close it. first you need to remove it and then you can close it. But I no longer own this scooter. I sold it to a friend. I only have the Code Name Z and the Hunter Quad. Thank you

[@indiano1964]

@@Nuno_Tomas ok thank you very much my friend for replying. so I won't be able to close it. I can forget the steering damper. thanks bye

[@Nuno_Tomas]

@@indiano1964 I highly recommend not to forget the steering damper. It's a must on these powerful scooters

[@indiano1964]

@@Nuno_Tomas man i know i'm in danger after 70kph. the steering column wobbles. but my parking lot is at home. in the elevator I have to close it. not or alternative. with the steering damper it will not be able to close, how to do it? thanks for the advice. Hello

[@joseluislidongarcia3902]

Hola , donde puedo comprar para este modelo el amortiguador de dirección

[@zackemk6395]

well done, the damper is on the way and i will try your way , feels like more compact and not sticking out that much like the regular way

[@Nuno_Tomas]

Thats what I think too. Send me pictures after the installationa. Thank you...

[@zackemk6395]

@@Nuno_Tomas yes, I will do that when it arrives 👍🏼

[@thiagobarros7341]

Boas! Quais as marcas que conheces, de melhor qualidade além da dualtron?

[@Nuno_Tomas]

Boas. Preço/qualidade é a ES19 da Laotie. Por 1400 euros nova na banggoy

[@reviewmaster517]

Will this work for the ES18 also?

[@Nuno_Tomas]

Yes. They have pretty much the same body.

[@mauroserna3237]

Please can someone be so kind to give me the links where to buy the hardware to install it? is that in my country it is difficult to get them in advance thank you very much

[@Nuno_Tomas]

Where do you live my friend?

[@krzysztofwozniak383]

Can u write what components you use for install damper? I know you say IT on video... But plz, write;)

[@Nuno_Tomas]

1 x Screw M8x70mm 1 x Screw M8x50mm 1 x Screw with the round ring (Arola) M6x50mm 3 x Nuts M8 1 x Nut M6 1 x Washer M6 2 x Washer M8 2 x Unions M8 2 x Unions M6 1 x drill 6.5mm 1 x Threading male M8 Thank you

[@krzysztofw5351]

@@Nuno_Tomas unions m6 x ??mm and m8x?? mm ? ;)

[@Nuno_Tomas]

@@krzysztofw5351 yes.

[@georgiosdontis3642]

From Where did you bought the steering damper ?

[@Nuno_Tomas]

From aliexpress my friend...

[@georgiosdontis3642]

@@Nuno_Tomas do you have a link ? I can’t find it

[@Nuno_Tomas]

@@georgiosdontis3642 Here you have my friend: pt.aliexpress.com/item/4000439822472.html?spm=a2g0o.productlist.0.0.38de545fak3Zf8&algo_pvid=394e49fc-5bc7-4d60-a279-b872497c6c9c&algo_expid=394e49fc-5bc7-4d60-a279-b872497c6c9c-31&btsid=0b0a556116107445025338825ea352&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

[@georgiosdontis3642]

@@Nuno_Tomas thank you very much my friend

[@Nuno_Tomas]

@@georgiosdontis3642 your welcome...

[@ruiaz701]

Só reparei neste video que és português. Não parecia. Já mandei vir um para aplicar na minha. Obrigado e abraço português kkk

[@Nuno_Tomas]

Boas. Sim sou Português com muito orgulho. Fazes bem, é muito importante o amortecedor de direção. Qual é a troti?

[@ruiaz701]

@@Nuno_Tomas É como eu, orgulho de ser Português. Não é tão monstro como a tua em termos de potencia mas a base é parecida. É uma Bezior S2 2400w. Realmente precisa de um estabilizador porque sem ele fica muito instável. Agora é só esperar que chegue. Já agora és de onde? Sou de Braga. Abraço

[@Nuno_Tomas]

@@ruiaz701 não conheço essa mas vou pesquisar. Eu sou de Alcobaça. Nunca fui à Braga mas acho que a malta quando o covid estiver mais calmo quer ir aí dar umas voltas.

[@ruiaz701]

@@Nuno_Tomas Apareçam, por aqui é muito bonito , então pelo gerês tens imensos sitios para explorar com as trotis.

[@giannissalas1300]

The length of unions??

[@Nuno_Tomas]

3cm

[@giannissalas1300]

@@Nuno_Tomas thanks! Its more stable now?

[@giannissalas1300]

@@Nuno_Tomas 3cm every bit?

[@Nuno_Tomas]

@@giannissalas1300 yes...

[@Noblishhh]

Link all the stuff please

[@Nuno_Tomas]

1 x Screw M8x70mm 1 x Screw M8x50mm 1 x Screw with the round ring (Arola) M6x50mm 3 x Nuts M8 1 x Nut M6 1 x Washer M6 2 x Washer M8 2 x Unions M8 2 x Unions M6 1 x drill 6.5mm 1 x Threading male M8 Thank you

[@Danelya30]

@@Nuno_Tomas Hi there, can you give the length of the coupling (Union) nuts? both M8 and M6. Thanks :)

[@Nuno_Tomas]

@@Danelya30 Hi Daniel. They have 2cm each.

[@twiztid83222]

I just drilled a hole through my red bar above tire

[@Nuno_Tomas]

It works too. So many ways...

[@andymazur9962]

@Tampa Can you post a picture of your setup?

[@Nuno_Tomas]

@@andymazur9962 we cant upload photos...

[@jorginho1800]

@@Nuno_Tomas through the community tab you can, greetings from Portugal

[@Nuno_Tomas]

@@jorginho1800 Tb sou de Portugal :)