CUSTOM SHIFTER KART BUILD PART 2: FRAME FABRICATION

[@julianmiloespinaluno]

Please could you give the map with the measurements.

[@oaagea]

Hi there.. can you please tell me where I can find this plan?

[@joshporter5459]

Wow. You should be really proud of your work. Well done.

[@diyek1781]

About the two bendings on the pipe of the front end where the spindles mount, is the bending so that the front tires level with the rear tires/rear axle? I heard that karts are designed that way to prevent flipping over while on turns or is just to level the front and rear end? Nice work thank you.

[@danielvega3062]

Hi, can yo please make a video showing the plans with all dimensions an angles?, I want to get in karting but I can buy one so maybe I can build it, thanks

[@kobek5272]

He had the autocad files for this build in his previous video in this series

[@mjk4378]

@@kobek5272 idk what you exactly mean but I aim trying to get ahold of those same measurement papers on building one.

[@jeffdeluca1153]

Great video.. and thank you for NOT using a million jump cuts like many do every three words!

[@anlsoyuguzel4729]

Hey Dude , looks fantastic , you made a uniq vehicle. I see that you have already created 3D of the frame , I would like to ask you that is there any possibility to get the 3D from you to adjust in my workshop , I can send you pictures after all :) ,

[@ronosys]

I did not understand anything you did as I am dead drunk. But dude I really appreciate the hard work you did put in as I myself did it once to get a rd400 chasis ready. Way to go with the Youngs modulus of your chassis. All the best from India 🇮🇳 🇮🇳 🇮🇳

[@kylekallies3381]

With the steering I would think about finding some ball baring that would work for less friction

[@BigDaddysYouTube]

Very nice job young man.

[@raulramosramirez]

Did you use 1” tube or 1 1/4” ? Awesome build !!

[@daltonbuchanan4833]

How much feet of tubing did you buy?

[@deanpurks7474]

Hi , I found your build page while searching for go-kart plans or if you have any suggestions where to find any i'm looking to build a kart for my grandson. Thanks

[@rlcustomsp]

Congratulations my brother. beautiful project.Would it be possible to send me the project with the measurements for me to try to do here in Brazil? Grateful in advance!

[@JLemus-ym3el]

Ik this vid is old but did you have any problems with warping wend welding

[@malachim2507]

Love this video cant wait to see it fully done

[@jeanphilipe3356]

kzbin.info/www/bejne/gpSQgX2HoLSEp5o

[@xxUnReality]

Where do you get your tubing from?

[@zakshah3480]

He mentions it in Part 1

[@Brad_Black]

How much tubing do I need to buy to build this frame? Would really help if you can reply to this :) awesome video btw!!

[@jacobhoke581]

Where did you get the blueprints? That’s awesome.

[@LuisDiaz-kg1fy]

What’s the type tubing you’re using?

[@griffenatekevinbacon]

Looks like conduit tubing

[@Depl0rable10]

he talks about it in part 1

[@Muzickification]

awesome! I just found your channel yesterday and was hoping for a part 2 of this one soon LOL

[@jeanphilipe3356]

kzbin.info/www/bejne/gpSQgX2HoLSEp5o

[@middletownriders1843]

Could you use pie cuts instead of a tube bender

[@stevepatterson2290]

question how thick are the side walls of the tubes ? 2mm, 3mm,4mm etc

[@gainonten4031]

Are you doing MIG welding?

[@mari-_-1685]

Can you put the sizing and measurements of the tubes please

[@michaeladameit1446]

Is there any was i can buy the blueprints off of you I’m very interested

[@iGrizzL]

Can’t wait for part3

[@jeanphilipe3356]

kzbin.info/www/bejne/gpSQgX2HoLSEp5o

[@kartikeyapaul2061]

how did you find the camber, caster angle

[@shehbaznijjar9441]

what are the mesurements can you please tell me

[@tiagocosta9714]

what tube sizing did you use?

[@jgb.vids.2654]

I wonder if I could just get all of those tubes from old bikes

[@jeremysanchez4738]

why was the kin pin already at 20 degrees?

[@SuperCookieGaming_]

when is the turbo honda coming back? are we going to get dyno numbers?

[@mjk4378]

What’s up man. Anyway you could take pictures of those blue prints and send em to me? I’ve been really interested in building one recently

[@griffenatekevinbacon]

Can i have the measurements to this build? I bought a mig welder kinda wanna have some fun

[@matthewfallon2288]

There’s a slim Chance you’ll see this but can you release the plans and measurements for the frame if you still have the, cause I’m trying to make my own

[@D11amee]

I think they are in the description of the first part

[@matthewfallon2288]

@@D11amee i looked at thoes and the 3d files have no measurements of the angles

[@filipprisecaru2596]

Hi what size and type tubing did you use?

[@elinunley971]

what do i have to do to get one made !!!

[@madsringgren3358]

Well done!

[@onbeatmusicgroup6473]

Would this pass the FIA Karting spec inspection for competition karting?

[@woozhi9218]

I suppose no but if you dial it to 11 i guess no one gonna know it's a homebree race kart

[@rickardbjorling3280]

Awsome great job!

[@ppmo8803]

Possible geometry??

[@princessfannytv3463]

where we can take measurements?

[@willsteirer3281]

I doubt you’ll see this but I’ll be passing by your area tomorrow. I’d love to meet up and take some pics or something. I have a sunlight silver rx8.

[@vnila4-mathieujodoin288]

how thick is the tubing?

[@Goodfella6969]

Aye I see you wearing Lafayette college I don’t stay far from there we need get together and do some riding with a few ppl on karts

[@XxPureHashxX]

Ive seen popular people use a harbor freight manual pipe bender just fine

[@XxPureHashxX]

As far as the video shows lol

[@jeanphilipe3356]

kzbin.info/www/bejne/gpSQgX2HoLSEp5o

[@adithphilip44]

Hey what are the outer diameter and wall thickness's of the tubes you're using?

[@PeterArmour]

1-1/4 .083

[@colestaples2010]

Did you design this?

[@juanaranda1236]

Hola, soy de chile, posibilidad de acceder al plano de ese go karts

[@diyadventures9138]

Do you sale plans?

[@jacobp6679]

Where did you buy the steel tubing and what welder are you using? I've been trying to find a supplier of steel tubing but the only place I can find it is at places like home depot where the only sell select sizes and it is extremely over priced.

[@The1990Pro]

I’m currently in the process of building a 125cc shifter kart for my senior project. I got 20ft long 1.25in OD, 1in ID tubing for $33 from a local metal place. (Type “metal place” into google maps and one should be relatively close)

[@PeterArmour]

as said in part 1, it is from the Pennsylvania steel company. frame is made of carbon steel round tube 1-1/4 .083 wall, Welder is a hobart handler 140

[@esteracing7049]

Extreme Replica?

[@patriciocastilloa3527]

Hello, i am Chilean. I Need make the support for cut tube (1:36) You Can tell me how?

[@vikaspeddina1115]

Which Material are you using for chasis ...

[@cameronwaycott4034]

1 1/4" Carbon steel tubing

[@saviour_rides_and_rides]

Hey dude can u send me the plans for your kart

[@shanshan5074]

Please could you give me the measurement on this go kart

[@brittenv1000]

Can i buy those plans?

[@daviddavis9411]

Nice work a true craftsman would you be willing to sale the drawing for you build

[@mainesmith2183]

What size tubing ?

[@ExplorewithZac]

Would love to know the tubing type and bending tool.

[@JapandaTuning]

carbon steel 1-1/4 inch tube 14 gauge bent with a protools bender and die. All info given in my part 1 of this series

[@woozhi9218]

Would carbon steel hold up the flex when cornering ?

[@AtlasGamming]

is that arc?

[@jdmmenace8378]

Will you made for me a Frame please

[@markarvind1404]

What is the background song?

[@elinunley971]

i need onee!!

[@ChristianGarcia-in6qj]

im a 6 foot tall about 200 lbs and using a 450 bmw motor do you think this frame will work for me?

[@haydentakara4369]

Christian Garcia yes just make sure the welds are proper

[@ethanrichert8151]

thanks

[@hagentran3332]

Just wondering if you could send my the diagram for this build

[@vikishe]

Thank you.

[@osmanmachado5501]

Can you sell me your plans I have a personal project?

[@alikalany6586]

can we get the dimensions pls??

[@memy4460]

where is the third part of the go kart building?

[@PeterArmour]

bro are you serious?

[@memy4460]

@@PeterArmour yes I was. Why are you asking? It was uploaded 2 hours ago and I wrote my question a day ago.

[@keithwingfield5101]

Badass

[@colestaples2010]

I would spend more time and money trying to get that done then I would spend buying one.

[@SR-qg7hw]

The volume of the music makes it impossible to watch on a smart tv

[@apeboi9775]

Ikr

[@wiawii]

Does your dad know you’re using his tools?

[@jeanphilipe3356]

kzbin.info/www/bejne/gpSQgX2HoLSEp5o

[@colestaples2010]

It's confirmed I'm an idiot

[@sedrixZombies]

99.00%

[@johnnys3160]

Could have been great without that Crappy HipHop Gansta crap

[@abdulazizalbastaki1464]

How long is the axel?

[@wiawii]

Does your dad know you’re using his tools?

[@PeterArmour]

not sure what your culture is, but here in America, 20 year old people can make money too

[@wiawii]

Peter Armour No shit, I guarantee those are still his dads tools.

[@wiawii]

Peter Armour Here in central Florida we know what the fucks up.

[@PeterArmour]

@@wiawii considering that is me, I can assure you they are not my fathers tools. They are in fact mine.

[@wiawii]

Peter Armour Sure buddy. Try again

[@steffka269]

Which tube size do you use?