I very much enjoyed your video, good clear and straightforward instructions and equally good and clear camera work. Many Thanks for posting / sharing. Mike from The UK.
@mmd19576 жыл бұрын
A
@ConcealedArtLeather8 жыл бұрын
I am a cabinetmaker and spend 10 hours a day working with power tools. I really appreciate the care and attention to detail this build displayed. Subscribed! Keep up the good work! Micah
@treebangham8 жыл бұрын
+ConcealedArtLeather Thanks Micah. The tool box project was a lot of fun. Please visit my shop again. Best regards.
@julesjenkins90449 жыл бұрын
Hi, another great video and Project, appreciated. Thanks ps, can't forget to thank your offsider, great camera work
@stepcorngrumbleteats76839 жыл бұрын
Beautiful work ! Thanks so much for sharing.
@oakenarm9 жыл бұрын
Hello Tree, I really enjoyed your video. This will make an great "Pal" project for me and my Grandson. He has already helped build his own tool tote and my new workbench.
@stephenmetsch63168 жыл бұрын
Nice to see a simple unassuming style and shop. Very clear instructions and good editing. Well done.
@treebangham8 жыл бұрын
+Stephen Metsch Thanks Stephen. Glad you enjoyed the video. Please visit our shop again. Best regards.
@mick47909 жыл бұрын
Hi, I really enjoyed your video on the Japanese tool box, looking forward to episode 3. Thanks, Mick
@mick47909 жыл бұрын
Cool
@MisterKisster9 жыл бұрын
Great instruction. I will say it I am your number 2 fan, number one being your camera friend of course.Trees give their whole life even after they have fallen.
@Valkiera9 жыл бұрын
Thanks, to you both for providing educational and entertaining projects for us to learn with.
@littlewolfandbear8 жыл бұрын
Great presentation! Very enjoyable to watch and listen to. Thanks!
@treebangham8 жыл бұрын
+littlewolfandbear Hello and thank you for visiting. Best regards.
@aaronnelson99818 жыл бұрын
I love it, and thanks to you and your wife for making these videos. I went out and bought myself a good Jr. Jack plane today, and some nice pine to make myself a box like the one you showed. Without a good local class in woodworking, I really rely on quality videos like yours, and I appreciate your sense of humour.
@treebangham8 жыл бұрын
Hello Aaron. Congratulations on your plane purchase and good luck with your project. Internet videos are an excellent way to learn woodworking and to share our projects with others. Thanks for taking the time to share your comments. Best regards.
@wahinenuiloa9 жыл бұрын
Thanks for sharing. Beautiful box, helpful techniques!!
@Dobbin10106 жыл бұрын
Just found your site and you are already a favorite.
@treebangham6 жыл бұрын
Hi Michael. I'm glad you found us, thanks for taking the time to say hi. Ken
@ReadandWite8 жыл бұрын
I have always known those nails as floorboard nails. All the floorboards in my 1906 house, both ground and first floor, have those nails every 2-3 feet. They are brilliant in respect that when banged home the wooden floorboards stay down, don't move etc. but conversely they can be sprung and reused in order to open underneath for checking or rewiring or re-plumbing etc.
@treebangham8 жыл бұрын
+ReadandWite Yes, I know what you mean. Most of the woodwork in my house is fastened with cut nails too. They have a strong grip.
@johnmadden66569 жыл бұрын
Very nice! Your shows are a lot of fun to watch! We especially like the woodworking tips that you share to describe what your doing. Nice camera work too!
@dougkeen19827 жыл бұрын
I'm envious of your rabbet and groove planes. I really need to invest in those two planes!
@treebangham7 жыл бұрын
Yep, you'll be glad you did.
@BladeforgerKLX6 жыл бұрын
This is the best how-to I found on these cool boxes!
@treebangham6 жыл бұрын
Thanks! Please don't hesitate to ask if you have any questions about the construction of these boxes. Best regards.
@warshipsdd-21426 жыл бұрын
Hey Doc, saw your post about C-Rats and Steelpike, was a jarhead on that cruise. Just saying hi.
@Kenfitzpat8 жыл бұрын
First visit to your channel. Great video. Look forward to seeing more. Thanks for posting.
@treebangham8 жыл бұрын
+Ken Fitzpatrick Thanks Ken. More videos on the way. Best regards.
@AnaMenaBrasil4 жыл бұрын
I was looking for a good explanation for a japanese tool box and I've just found :-) Thank you for this video! Regards from Brazil
@treebangham4 жыл бұрын
Hello Ana, I'm glad my video was helpful. Thanks for taking the time to send me a note. Regards from the US!.
@devodar25798 жыл бұрын
You're one heck of a craftsman! Your camera person is most excellent! Always steady and zooms in nicely...only when needed. Just excellent work. Great team and thank you for sharing
@treebangham8 жыл бұрын
+Devo Dar Hello Devo. Joaneen's camera work really makes a difference. Thanks for appreciating her work. Please visit us again.
@tmartin23479 жыл бұрын
Great series!
@ricardocf73459 жыл бұрын
Amazing vídeo! !! Congratulations!!!
@pamelaallen65435 жыл бұрын
I enjoyed watching you use the hand tools, it's my favorite thing to do in woodworking. I love the tool boxes and I think my husband would like one. When I get my shop set up, it will be the first thing I build. Thank you!!
@treebangham5 жыл бұрын
The tool boxes are fun to make. As you can see, I made a bunch of them. Good luck with your build and please contact me if you have any questions abut the construction. Best regards.
@BigFatTonys8 жыл бұрын
Unbelieveable !!!! a woodworking shop in a room of the house !! I have never seen this before !
@treebangham8 жыл бұрын
+Big Fat Tony's I really enjoy having my workshop on the first floor. It's the first thing you see when you enter our home. Not for everyone, but it works for us. Thanks.
@50guitar9 жыл бұрын
Another nicely done vid!
@brentp16306 жыл бұрын
This is truly amazing. Thank you so much for sharing this build and old techniques. I truly appreciate you taking the time to put this video together. Recently all of my power tools were stolen so I decided to go all in on hand tools. And this is the PERFECT project with great instructions for what I'll work on first. Keep up the amazing work. I'm so glad I stumbled onto your page.
@treebangham6 жыл бұрын
Hello Brent. The Japanese tool box project was lots of fun. As you can see...so much fun I made a bunch of them! This project will help you develop essential hand tool skills while making something useful for your shop. Good luck and please let me know how it goes. Best regards.
@ericb.davenport97624 жыл бұрын
Brilliant. I really enjoyed this video. Thank you. EBD.
@treebangham4 жыл бұрын
Hi Eric. Thanks for watching and sending me your note. Best regards.
@boenhiantan87473 жыл бұрын
Inspiring. I want to make one (smaller). Thanks for the very clear step by step instructions.
@treebangham3 жыл бұрын
Hello and thanks for the note. Good luck with your box build. Please feel free to ask questions if you have any along the way.
@kiaya0075 жыл бұрын
man i love your style and that handy dandy rocket surgery clenching station you got going on there haha :D keep em coming guys. i loved it.
@treebangham5 жыл бұрын
Thanks Wayne! Glad you liked it. Yes, more to come.
@ianpearse44804 жыл бұрын
Thanks for a great video. Really enjoyed it.
@treebangham4 жыл бұрын
Thanks Ian. Glad you enjoyed it. Please visit us again.
@JoelShapiro9 жыл бұрын
Great video!
@karlapiacentini88768 жыл бұрын
Simple but elegant tool chest. thanx for sharing
@treebangham8 жыл бұрын
+Karla Piacentini Thank you Karla. Please visit us again.
@johnspencer11459 жыл бұрын
great video as usual thank you !
@teresitasese26158 жыл бұрын
this is so cool...looks so easy to make...but when it comes to sawing and smoothing the wood I would need extra help to do it for me.......very clear demonstration...cool!!
@treebangham8 жыл бұрын
+Teresita Sese Hello Teresita, glad you enjoyed the video. There are many good projects for beginning woodworkers. Give it a try! Thanks for visiting my workshop.
@Creator_Nater8 жыл бұрын
These are really fun to watch, thank you for sharing your knowledge
@treebangham8 жыл бұрын
+Nathanfenn1 Thanks!
@BigDxxxx19 жыл бұрын
Thanks folks!... I've not watched this yet, wow 28mins long - I'm in for a treat... Cuppa tea, biscuit, and put my feet up to watch :)
@BigDxxxx19 жыл бұрын
***** fab, very enjoyable watch! #rocketsurgery #chuckle
@bobberner9 жыл бұрын
Another excellent video my fiend!
@garysobczak99313 жыл бұрын
Great video. Thank you!!
@treebangham3 жыл бұрын
Hi Gary. Glad you liked the video. Thanks for visiting us!
@afterthemouse4 жыл бұрын
Right then - Woodwork project No1 with my son, sorted!
@treebangham4 жыл бұрын
It's a great father and son project. Have fun!
@jimporter34148 жыл бұрын
Thanks for the very good video. I like the design very much and plan to build one 1/2 scale.
@treebangham8 жыл бұрын
+Jim Porter Thanks Jim. Half scale would be a good size. Good luck with your project.
@achillelebitoux76358 жыл бұрын
Good job ,the result is great .As a french joiner I suscribed.
@treebangham8 жыл бұрын
+achille le bitoux Thanks Achille! I'm glad you liked the video. Please visit again. Regards
@PreachermanPiper9 жыл бұрын
That is a great thing to make as gifts for friends.
@Eweber0073 жыл бұрын
This is the best video of this type of project I've seen to date, although I wish you would have used thr clinched nail technique on the handles instead of glue.
@treebangham3 жыл бұрын
Hi Edward. Yes, there are lots of options for joinery in a project like this. Thanks for the visit.
@ccddbig9 жыл бұрын
very cool for 1st project, and to put in my car trunk for car tools ect. Thanks
@giorgos4249 жыл бұрын
Very nice video!! Just a question though.. When I saw another demo on nail quenching they a made it a point that we should bend the nails across the grain so that we get more strength out of our joint, which seemed pretty logical. But, you bent your nails with the grain, is there a reason for that?
@hootgibson40047 жыл бұрын
I know I'm late to the party, but I really enjoyed this.
@treebangham7 жыл бұрын
Thanks! The Japanese tool box project was lots of fun and I enjoyed sharing the progress.
@Orxenhorf6 жыл бұрын
I'm thinking a box like this could make good storage for back saws.
@treebangham6 жыл бұрын
It sure could and with the removable lid you would have easy access from either side.
@TheMoQingbird9 жыл бұрын
Hi Tree, I really enjoy your vids, keep it up. Sawing 'up hill' when you cut the handle recess out looked a bit awkward. Have you tried using a saw horse?
@donaldheselton232 Жыл бұрын
I see the brads you used to align the “handles” to stop the slipping during the glue up. I’ve used small amount of salt when gluing, and could eliminate the brads.
@treebangham Жыл бұрын
Thanks, I’d heard about using salt but haven’t tried it.
@StuartOverton5 жыл бұрын
Great video, I can't wait to make one for myself. One thing though, I thought that clenched nails were supposed to be bent across the grain to guard against splitting?
@treebangham5 жыл бұрын
Yes, the recommended way is across the grain. I made test joints both ways and they are both very strong. I can’t imagine it would make a difference, but still, it’s probably best to go across the grain. Thanks for the question.
@uspenpujiandri93738 жыл бұрын
perfect job, love those hands so much, i wish i could do so much work like you do
@treebangham8 жыл бұрын
+uspen pujiandri Hello uspen, pick a simple project and have some fun! Thanks for visiting.
@uspenpujiandri93738 жыл бұрын
+treebangham already try but the result is not that good enough, i tried many simple project but the result is the same, atleast i have some fun, some advice from the expert might be good...
@treebangham8 жыл бұрын
+uspen pujiandri Keep trying. Improvements will come. It's a fun journey. Good luck!
@baxterrinehart6166 Жыл бұрын
I love this. But 3 things come to mind here. First you choke your hammer a lot. You use a lotta glue. And I have a lotta respect for anyone who can make a saw kerf meet in the middle of the board like that. How you hold the hammer is perusal choice though. Great video.
@treebangham Жыл бұрын
Hi Baxter, thanks for the note and your input. Glad you enjoyed the video.
@donaldheselton232 Жыл бұрын
Nice job! I agree the cut nails will work great! What thickness of the wood? 3/4 inch?
@treebangham Жыл бұрын
Thanks Donald. I used 3/4" eastern white pine, straight from my local home center.
@kiaya0075 жыл бұрын
you can also tweak your toolbox by making another rail like you would for a french cleat system and attach it to the inside of your lid using the cut nails but only drive in the nails about half way. glued on with the half way driven nails becoming pegs to hang your tools on. of course the side of the toolbox would have the other half of the bevel for the french cleat system so the lid will stay in place once placed. not my idea. i got from another you tuber i watch. i think that little tweak makes this box even more in line with the practicality of a Japanese toolbox. Japanese woodworkers hang their planes on the side of their box so why not a peg board to keep everything right there ready to use. :D
@treebangham5 жыл бұрын
Good idea Wayne. There are many adaptations that can make the box more useful. Thank you for sharing that.
@dongyde25768 жыл бұрын
I think it's realy nice, keep up the good work...
@treebangham8 жыл бұрын
+Don Gyde Thank you Don...will do!
@fytotechnistje6 жыл бұрын
Great build! I will make one myself. May I offer you some advice? It looks like you're using a hardpoint saw for the compound cut. Those are designed for crosscutting. You would be amazed how much faster a rip saw works at making that same cut.
@treebangham6 жыл бұрын
Yes, the saw I am using is much better at crosscutting. I've been getting by with it but I'm in the market for a good rip saw. Thanks for visiting us.
@fytotechnistje6 жыл бұрын
Thank you for making this build-along. A good rip saw can be had for very little on flea markets. They usually go out of use because not a lot of people know how to sharpen them.
@fytotechnistje6 жыл бұрын
I finished my tool box! Thanks again for the instructions. kzbin.info/www/bejne/e5Xac313o8-Hjrc
@treebangham6 жыл бұрын
Wow. Beautiful work! Thanks so much for sending me the link to your video. Well done.
@Traderjoe8 жыл бұрын
Very nice! You are great, I subscribed
@treebangham8 жыл бұрын
+traderjoes Thanks!
@kevindamms98078 жыл бұрын
makes me want to buy a quality block plane and miter saw.. I think I'll stick with myself trusty table saw. but I'll definitely be making one of these soon
@treebangham8 жыл бұрын
Hi Kevin. There are many ways to make these boxes. A table saw works too! Have fun with your project.
@steveneugene3394 жыл бұрын
In awe . How do you determine the length of the lid for the slid ? I'm having a bit of a brain fog . This is a awesome project .
@treebangham4 жыл бұрын
Hi Steven. The box opening is 17 ¾ " long. The lid is 19" long. The battens are 2" wide. Regarding the lid. The lid is ¾” longer on the front end (regular batten end) and ½” longer on the other end (tapered locking batten). I suggest you mark these points on the lid, place it inside the opening (supporting the lid with a stack of books) and position it according to your marks. Now mark the lid for the position of the front batten and the locking batten. Make any fine adjustments by planing the edge of your locking batten to fit. I hope this helps.
@steveneugene3394 жыл бұрын
@@treebangham Thank you for the reply , it all makes sense now . Thank you again for a great project . And for your help . Best of the season to you .
@blueskyredkite8 жыл бұрын
You, Sir, are an *excellent* presenter. I wonder, were you, perhaps, a teacher in a previous career? I've only watched a couple of your vids so far, but I have subscribed because I intent to pass time on the coming dark and miserable winter evenings with more of your videos.
@treebangham8 жыл бұрын
+Justin C Hello Justin and thank you for the kind compliment. No, I've never been a teacher by profession but I enjoy seeing people learn. I hope you enjoy my other videos throughout this long winter. Best regards.
@BigFatTonys8 жыл бұрын
based on what you said about the orientation of the cut nail to reduce splitting, would the clinching be better off if done cross grain ?
@treebangham8 жыл бұрын
+Big Fat Tony's Nail orientation is very important to avoid splitting. Especially near the edges or ends of boards. For clinching, across the grain is recommended for a better grip, but I found little difference either way, so sometimes I'll clinch with the grain. Thanks for your question.
@chuckhart89709 жыл бұрын
Well I am glad to see you do another video. Well done in one shot. The camerawoman should get some credit. I like your videos. I have a question, where did you get your plow plane? The boxes are interesting I am going to build one also. Where did you buy your nails? I am full of questions. Thanks for a great video again. Chuck
@adamrummer53427 жыл бұрын
why did you put the coins in between the tongue and groove joints when you nailed the bottom to the box? thank you for the video.
@treebangham7 жыл бұрын
Hello Adam. Wood expands and contracts with seasonal changes in humidity. I used the coins as spacers to allow room for the boards to expand if they need to. Thanks for the question.
@dadintheyard87998 жыл бұрын
treebangham, I really liked your video and the toolbox you made. Where did you get your cut nails? Also you never mentioned the dimensions of the box you made...what are the dimensions? Are you using 3/4 stock?
@treebangham8 жыл бұрын
+Trent Weaver Thanks Trent. I got the nails from Woodcraft. They're made by the Tremont Nail Company and packaged in smaller quantities by BT&C. Yes, I used 3/4" stock. The overall dimensions are 24" x 11.25 wide x 9.5 high. The two pieces on the top ends that define the opening are 3" wide. The opening is 17.75" long. The lid is 19" long. The battens are 2" wide and the handles are 2.5" wide. The article that inspired me to make the box is at books.google.com/books?id=vPYDAAAAMBAJ&lpg=PA1&pg=PA58#v=onepage&q&f=falseYou%27ll. I hope this helps, thanks for visiting.
@vicpetrishak77057 ай бұрын
Cut the sides of the locking wedge on an angle and the boards it mates with . It will not fall lose . Like fabricating a dovetail !
@treebangham7 ай бұрын
Yes, that is a feature I like about this box. Thanks for the visit.
@FIGUEIRINHA5 жыл бұрын
I can't find the outside dimensions. maybe the dimensions follow the golden rule phi? nice work and thanks for posting it
@treebangham5 жыл бұрын
Hello. I often use the golden ratio in my designs but not on this project. The tool box measures 24" long, 11.25" wide by 9.5" high. Thank you for the question.
@FIGUEIRINHA5 жыл бұрын
thanks
@robertbrunston54066 жыл бұрын
Thank you.
@treebangham6 жыл бұрын
Thanks!
@danielfunk77698 жыл бұрын
That is where I got lost. Is the lid cut shorter than the overall inside dimension
@treebangham8 жыл бұрын
+Daniel Funk The lid is actually one and a quarter inches longer than the opening. The battens allow the lid to slide back and forth under the opening. They also position the lid for the locking batten. When closed, the lid is 3/4" longer on the front end (regular batten end) and 1/2" longer on the other end (tapered locking batten). I suggest you mark these two points on the lid, place it inside the opening (supporting the lid on a stack of books) and position it according to your marks. Now mark the lid for the position of the front batten and the locking batten. Nail all the fixed battens in place and plane the locking batten to fit exactly. I know this is confusing but it makes sense as you watch the lid in action. Review from 15:50 to 17:30 of this show to see how the lid fits in place. I hope this helps!
@brucew63007 жыл бұрын
Dear Sir! Thank you very much fro showing this great work! I love the wonderful box. Please let me ask you for a building plan! I tried to make such box, but my top is to short or too lang!! Many greetings from Germany! Bruno
@treebangham7 жыл бұрын
Hello Bruno I wish I had a published plan to send you but I don’t. The article that inspired me to make the box is at books.google.com/books?id=vPYDAAAAMBAJ&lpg=PA1&pg=PA58#v=onepage&q&f=falseYou%27ll. I used 3/4" pine from my local home center and 6 penny fine finish cut nails made by the Tremont Nail Company and also sold by Brooklyn Tool & Craft. The overall dimensions are 24" long x 11.25 wide x 9.5 high. The two pieces on the top ends that define the opening are 3" wide. The opening is 17.75" long. The lid is 19" long. The battens are 2" wide and the handles are 2.5" wide. Regarding the lid. The lid is ¾” longer on the front end (regular batten end) and ½” longer on the other end (tapered locking batten). I suggest you mark these points on the lid, place it inside the opening (supporting the lid with a stack of books) and position it according to your marks. Now mark the lid for the position of the front batten and the locking batten. Make any fine adjustments by planing the edge of your locking batten to fit. This worked for me, feel free to adjust the dimensions to work for you. If you have any questions I will be happy to answer them. Thanks for visiting my workshop and good luck!
@brucew63007 жыл бұрын
***** Thank you so much for the infomrationes! I will do my best! Many greetings across the atlantic from Bavaria, Germany - Bruno
@donaldheselton232 Жыл бұрын
Is the grain direction the same as the two sides and two ends? I’ve see other boxes which have end pieces grain vertical and the side pieces are horizontal grain.
@treebangham Жыл бұрын
The sides and ends are the same grain direction, horizontal. The only cross grain joinery is with the top ends and the lid battens. The battens are nailed on and the nails can flex with seasonal movement, the top ends are glued and nailed on, but they are relatively narrow and have never been a problem. Thanks for the question.
@teslabolt0077 жыл бұрын
What kind of plane did you use for the tongue and groove ?
@treebangham7 жыл бұрын
Hi Jeremy. It's a Veritas small plow plane available from Lee Valley Tools. Thanks for the visit.
@johnlofts33167 жыл бұрын
Love the videos, many thanks for clear exposition and excellent camerawork. You could give lessons to others on youtube! Couple thoughts: the box will be heavy when filled so I'll be cutting down weight wherever possible eg glue not nails (those chunky cut nails you used must weigh quite a bit, in total so i'll be replacing with either glue and/or wooden dowels. Also think the middle batten can be dispensed with. And cutting a scallop in the handholds would both lose bit of weight and be more comfy, no? re clinching: have you seen the method used by The English Woodworker in his wall cupboard video? worth a look. Meanwhile it's very nice to have your sense of humour coming through, also your easy relationship with Joanene; I'm envious -- what's the trick to getting one's wife to laugh at one's jokes? I've been trying for years. Bests, John L.
@treebangham7 жыл бұрын
Hello John, thanks for your compliments. I too have considered making a lighter box. I would make the long sides, bottom and top from 5/8" or possibly 1/2" stock instead of 3/4. The other parts would remain 3/4. I'm not sure the nails contribute that much to the weight by I haven't actually made a comparison by weight. Let me know if you do. The middle batten could certainly be dispensed with but keep in mind that any cupping of the lid at all will affect its fit. Good idea with the handholds! Yes, I've seen Richard Maguire's clinching technique on The English Woodworker. He's an outstanding woodworker and one of my favorites to watch. How do I make my wife laugh? That's easy...I've been a goofball all my life! Best regards.
@Jarni19798 жыл бұрын
25:02 "scus" what?
@ericb.davenport97624 жыл бұрын
I need to get a good jack plane similar to the one you used in this video. Could you please let me know the plane you use and where I could buy one? Thank you very much. Eric D.
@treebangham4 жыл бұрын
Hi Eric. The plane I’m using is a Stanley #5, type 14, made around 1929-30. I bought it on Ebay and tuned it up. Fun to use!
@ericb.davenport97624 жыл бұрын
treebangham thank you Sir. You are fun to watch. Happy Thanksgiving.
@waipang35418 жыл бұрын
Isn't the middle batten for the lid meant as a handle? bevel it like you did on the other one, but on both sides?
@treebangham8 жыл бұрын
Hello Wai. The batten is primarily to keep the lid from warping, but yes, you could bevel the edges and use it as a handle for the lid. Good idea! Thanks for the suggestion.
@waipang35418 жыл бұрын
No problem! this Japanese box will be in my project queue for my workshop! Keep up the good stuff :)
@BigFatTonys8 жыл бұрын
As it is, the box top does double duty as a saw stop. With adding a board to the underside of the top, shorting the topside batons and putting the middle one at 45' the top could also be a bench hook shooting board. Or has this been tried and failed ?
@treebangham8 жыл бұрын
+Big Fat Tony's Hi Tony. What I enjoy about woodworking is customizing a design to suit my own needs. It's a clever idea to use the top as a bench hook or shooting board and I'm sure it can be done. Thanks for sharing your ideas.
@dianeernest1660 Жыл бұрын
Is that a three-quarter inch by 12 inch pine board
@treebangham Жыл бұрын
Hello Diane. The lumber is ¾” thick x 11 ¼” wide. I believe it is Eastern white pine but not sure. I used a full width piece for the bottom of the tool box.
@danielfunk77698 жыл бұрын
How did you figure out the lid length
@treebangham8 жыл бұрын
+Daniel Funk Hi Daniel. I looked at similar boxes, made measurements and thought about it till my head hurt. The tricky part was positioning the battens.
@speranzaribeiro8 жыл бұрын
bravo. muito bom
@treebangham8 жыл бұрын
Obrigado Jor. Atenciosamente.
@tonymarks39509 жыл бұрын
Mr. TreeLove your videos!Can you give us approx. dimensions of the box.
@treebangham8 жыл бұрын
Thanks Tony. The overall dimensions are 24" x 11.25 wide x 9.5 high. The two pieces on the top ends that define the opening are 3" wide. The opening is 17.75" long. The lid is 19" long. The battens are 2" wide and the handles are 2.5" wide. The article that inspired me to make the box is at books.google.com/books?id=vPYDAAAAMBAJ&lpg=PA1&pg=PA58#v=onepage&q&f=falseYou%27ll.
@tonymarks39508 жыл бұрын
+treebangham Thanks a lot.
@RobertoDonatti9 жыл бұрын
Great video, thank you! Is there anyplace where I can get drawings and dimensions? I would like to build one.
@roibeardbillson33049 жыл бұрын
RobertoDonatti Toshio Odate's book, “@0941936465“ gives a brief description and dimensions of the tool box. Greg Merritt did a very nice multi-part build on his blog complete with excellent drawings and scalable dimensions, @2015
@roibeardbillson33049 жыл бұрын
Roibeárd Billson That didn't work. Toshio' s book is "Japanese Woodworking Tools: Their Tradition, Spirit and Use". Greg's blog is: hillbillydaiku.com/2015/05/06/japanese-toolbox-progress-1/
@RobertoDonatti9 жыл бұрын
Roibeárd Billson Thank you, very helpful
@RobertoDonatti9 жыл бұрын
***** Thanks a lot. The dimensions were very helpful
@SamuraiWilko7 жыл бұрын
nice work :) measurements, please?
@treebangham7 жыл бұрын
Hi Wilko. The article that inspired me to make the box is at books.google.com/books?id=vPYDAAAAMBAJ&lpg=PA1&pg=PA58#v=onepage&q&f=falseYou%27ll. I used 3/4" pine from my local home center and 6 penny fine finish cut nails made by the Tremont Nail Company and also sold by Brooklyn Tool & Craft. The overall dimensions are 24" long x 11.25 wide x 9.5 high. The two pieces on the top ends that define the opening are 3" wide. The opening is 17.75" long. The lid is 19" long. The battens are 2" wide and the handles are 2.5" wide. Regarding the lid. The lid is ¾” longer on the front end (regular batten end) and ½” longer on the other end (tapered locking batten). I suggest you mark these points on the lid, place it inside the opening (supporting the lid with a stack of books) and position it according to your marks. Now mark the lid for the position of the front batten and the locking batten. Make any fine adjustments by planing the edge of your locking batten to fit.I hope this helps. Best regards.
@SamuraiWilko7 жыл бұрын
thanks ;)
@papitas60614 жыл бұрын
When using cut nails on the lid, how do you account for the grain of the lid and the baton going different directions?
@treebangham4 жыл бұрын
The nails allow the lid to flex just enough to prevent the splitting or cracking that can occur if I had used glue. Using nails is an important feature with this kind of construction. Thank you for the question.
@jimk42679 жыл бұрын
I really appreciate your videos. And now so does my daughter. She loves Japanese items and when I saw this video I knew this was my next project. kzbin.info/www/bejne/a2rJgnqtqMhke5I She is very eclectic so the inside trays and box is just a mish-mash of different dovetail items. Amber shellac was not my first choice but it is what she wanted. Again, thank you so much for the inspiration. I can imagine when you created this project you wondered if anyone would really appreciate all the work you and your wife put into it. Many of us do. Please keep the videos and ideas coming.
@izarbeleuskadi47519 жыл бұрын
good job
@Godzilla19536 жыл бұрын
Could you do a video on sharpening your tools look nonsensically sharp.
@treebangham6 жыл бұрын
Hello Nathaniel. I use the scary sharp method for sharpening because that's what I am used to. I'm considering other methods too. I call my tools "working sharp" and try to keep the process as quick and simple as possible. Regards.
@12namleht9 жыл бұрын
Are there drawings for this box? Measurements, etc.?
@zlee6269 жыл бұрын
+treebangham It helps me a lot! Thanks for sharing!
@buffhooper74179 жыл бұрын
checkout how paul sellers sharpens and uses a rip saw. i think you will like it. thanks for the video.
@kevindamms98078 жыл бұрын
think about *
@macoyvillalobos26098 жыл бұрын
Hello! we have our very old mother house. I was puzzled how did our old folks made those fancy wood works. Since back in the day there's no electricity here in our province at Philippines. No power tools. When I saw that cute plow plain i am just amazed. I just realized, ah that's how they made those grooves! As I watch you made that beautiful box I have learned so much. Thanks I wish I can be skillful like you.
@treebangham8 жыл бұрын
Hello Macoy. I'm so glad you appreciate the fine woodwork in your mother's house. The craftsmen who made those grooves would be glad to know that. There is much to learn from artisans of the past when we take the time to notice. Thank you for sharing this with me.
@mbchang63879 жыл бұрын
awesome !!!
@dougkeen19827 жыл бұрын
I just changed my mind on the type of tool box I'm making my father-in-law. But I am going to use dovetails instead of nails at the corners. Very interesting piece.
@treebangham7 жыл бұрын
Hi Doug. So many variations. That's one I'd like to see! Thanks.
@kevindamms98078 жыл бұрын
do you have a set of dimensions anywhere I will be honest I'll steal this project finish it with some linseed oil and give them as gifts did you consider countersink ing the cut nails and dowels for a clean finished look. I know the point is simplicity just curious
@treebangham8 жыл бұрын
There are countless ways to make these boxes. That's what's fun about woodworking. I like your idea about the dowels. I used 3/4" stock. The overall dimensions are 24" long by 11.25" wide by 9.5" high. The two pieces on the top ends that define the opening are 3" wide. The opening is 17.75" long. The lid is 19" long. The battens are 2" wide and the handles are 2.5" wide. As you see in my video, you can easily make these boxes any size you choose. Good luck!
@ALe-dh8oq8 жыл бұрын
1. Japanese toolbox? I doubt they used nails.. 2. if you gonna ruin your work with nails. use nails proper lenght..