Optimizing Settings in AI Voice Changer Client

Links referenced in the video:
w-okada's github repo: github.com/w-okada/voice-changer
AI Voice Changer Client Installation: • Realtime AI Voice Chan...
Get it working in Discord: • How to Connect AI Voic...
Hardware for my PC:
Graphics Card - amzn.to/3pcREux
CPU - amzn.to/43O66Ir
Cooler - amzn.to/3p98TwX
RAM - amzn.to/3NBAsIq
SSD Storage - amzn.to/42NgMFR
Power Supply (PSU) - amzn.to/3NBAsIq
PC Case - amzn.to/447499T
Mother Board - amzn.to/3CziMXI
Alternative prebuilds to my PC:
Corsair Vengeance i7400 - amzn.to/3p64r22
MSI MPG Velox - amzn.to/42MnJHl
Cheapest PC recommended:
Cyberpower 3060 - amzn.to/3XjtZoP
Come join The Learning Journey!
Discord - / discord
Github - github.com/JarodMica
TikTok - / jarodsjourney
If you found anything helpful, please consider supporting me and the content I am trying to produce!
www.buymeacoffee.com/jarodsjo...

[@nadare881]

Great video. thank you I'm one of the VCClient and RVC contributors. There are some additions to the content of the video. Regarding the difference between the f0 estimator harvest and crepe, in addition to the sound quality, harvest uses a CPU and crepe uses a GPU. Crepe can improve latency if you have a good GPU. In sever mode you can choose the sound driver. VCClient measures latency within VCClient, but additional latency is added when connecting to other devices. Besides MME, WASAPI and ASIO can be selected, so if you can use them, I recommend using them. For the protect item in advanced options, if protect is set to less than 0.5, the ratio of retrieved features will be reduced in cases where f0 estimation is unsuccessful (silence or breath sounds).

[@Jarods_Journey]

I've seen, appreciate your work and thank you for the additional information!

[@XCanG]

Would be better if next to every option will be ? icon when on hover you will see popup with explanation. It will help a lot.

[@hired_meo]

Yo app just mines BTC stop the cap.

[@paradym777]

@@hired_meo proof?

[@hired_meo]

@@paradym777 My Premium Kaspersky version 😀

[@stnhndg]

From a musician experience: if you have ASIO supporting soundcard - use ASIO instead of MME. It decreases the audio delay provided by audio tract (e.g. on my PC guitar/mic recording delay for 1024 samples chunk is 180ms for standard MME, and 14ms for ASIO). Theoretically WASAPI can also work fast however I don't have WASAPI supported hardware.

[@realxdey]

It stutters for me when use my asio soundcard or just doesnt work at all

[@PrincessAliceManor]

@@realxdey same here

[@lampookie]

Where do I change the settings for asio?

[@konradbak4804]

ASIO4All an any other ASIO doesnt work.

[@lollmaonice]

hearing senchou speaks english just feels weird, not in a bad way it's just feels like im hearing something im not supposed to hear in my entire life

[@thatonecole7233]

Thanks for all the help! You have responded to all of the comments and provided everything Ive needed. Anyways keep up the great work and keep doing what you are doing 👍

[@Nekotaku_TV]

I'm so lost. My window is just empty when I click on the native client exe...

[@erobot7963]

Thank you so much for making this video. I have a RTX 3090 and was wondering why no matter how much I messed with the Extra and Chunk settings, the voice still sounded distorted, but it was probably because I had the pitch too high where the voice probably wasn’t trained (I was using above 20 pitch) I didn’t know that most voices are trained no higher than 12. I’ll mess around more with this program tomorrow with what I learned from this video.

[@kujii_6606]

question, how to train? what does train do? i followed all previous tutorial and the voice output only sounds distorted repetitive. im using ryzen 3600x with gtx 1050ti 16gb ram.

[@Jarods_Journey]

If you've already trained, you might need better audio samples, more samples, or adjust settings to better fit your system via chunks/extra

[@Phoon1G]

Great video as always glad you went through everything with a good explanation for everything! Keep up the great work, and i am excited for what will come after RVC!

[@OtterPirate]

Tech is getting so cool, great video!

[@wp363]

This worked so great on my first Voice Changing experience. Other videos on your channel are also great! Thank you very much.

[@konradbak4804]

HI, I have an idea to use the RVC client on a karaoke party . I'm struggling to make the delay short enought to sing in real time. It's just not possible. I bought top graphic card - Zotac RTX 4090 with 16500 cuda cores. The delay (even in passthru mode) is ca 0,3 sec and theres no way to get rid of it. Only sound driver that work is MME , but the latency is enormous. I can't make it work (in server mode )with any of the ASIO drivers I have. It's mute. .I've Downoladed ASIO4All. Mute. Bought Focusrite 212 interface. Asio is dead. Realtek ASIO with built in sound card - doesnt work, as well. What I'm doing wrong ? \ My CPU is Intel i9 12900K

[@CoronaBorealis02]

i literally just upgraded from my 1050ti to a 4070 today just to use this + other AI tools. love these tutorials

[@Jarods_Journey]

GZ! Very solid card right there :D

[@GraveUypo]

i'm probably going to buy an rtx 4090 for AI stuff too. otherwise i'd buy a 7900xtx. it costs half as much, has the same amount of vram and the performance of a 4080. too bad amd sucks with these things.

[@natsukinaru7271]

man im using intel HD card 💀, will it work?💀

[@JahtiXD]

I'm still using rtx 2060

[@meteorfromsky2185]

I'm using 920mx😀

[@humble5269]

you're a legend!! insane video quality and tutorial, can't believe i found pure gold at 4 am. i guess youtube can also be a chad and recommend really good content wow

[@Kyuubical]

If anyone has issues exporting an ONNX file and getting an error message in the GUI (it usually just says error message: no error message), but if you check in the console it says that pytorch has tried to allocate VRAM and has failed. A quick workaround for this that worked for me was changing in the GUI to use my CPU instead of my GPU and then exporting the ONNX worked. Afterwards you can change it back to your GPU.

[@Jarods_Journey]

Smart, didn't even cross my mind xd

[@IderuShikesu]

i still get an error in the GUI.. if it helps,this is what is shown on the console : "[Voice Changer] get_onnx ex: Can't get source for . TorchScript requires source access in order to carry out compilation, make sure original .py files are available."

[@NatsukisVideoUploader]

yooooooooo thank you so much

[@Nebularban]

What do you mean changing the gui?

[@IderuShikesu]

@@Nebularban changing the setting in the GUI

[@GraveUypo]

i have to figure out a way to offload the processing to my laptop so it doesn't bug out when playing demanding games. is there a way to access it from a lan client? ps: i thought the directml version worked for my 6900xt, but it's processing on the cpu. but, on the plus side, converting to omnx literally halves the load on the cpu. when running this exclusively, i managed to get a total lag of 400ms buffer + processing. not bad for an octacore cpu (5800x3d)

[@bwowzah]

Great video! I'm glad you showed what this program is capable of on a 4090. It seems we're not quite there yet with AI voices. I wonder if this is a small hurdle that will be overcome soon or a insurmountable mountain like hands are to AI art.

[@Jarods_Journey]

Ah, actually some AI voice models that I've tried are actually pretty scary accurate, meaning my models need a bit more training lol. I would say we're not that far away from indistinguishable voices

[@tetragrammaton3]

Great! can't wait to try this out to see if it improves performance. If it doesn't I might just install windows 11 to match your settings exactly.

[@M4rt1nX]

Thanks, I really need to try this one.

[@Ariacompany]

Hear Botan/Marine speaking clear English is kind of weird&awesome at the same time XD

[@F29o0oLXawsome]

Very helpful 👌 . Just where can you get models?

[@CloudEdit]

I'm very sad, I've been trying to configure this for days, but my pc doesn't have any good gpu, only cpu, and I think that's why my voice is laggy too much, and it takes a long time to come out, I can't find a perfect cpu setting, please help me, because the voice doesn't even want to come out right, is just laggy 😢😢

[@Kiimo_Chii]

Hi im the one on your discord server who created a ticket about the gl not loading and you said to change the chunk to max, i just switched the audio to server and it worked perfectly for me, i guess theres a weird thing going on with client option. Just wanted to put it out there

[@feintcobra]

Do you think we could get a download for the Marine voice?

[@Solo_Recapping]

Damnn, the intro transition was goood

[@ItzMoa-]

i seem to have a problem with delay, theres a long delay before the voice starts working, is there a way i can fix it?

[@visionzero6904]

please do you have a fix for: [Voice Changer] Pipeline is not initialized. [Voice Changer] Waiting generate pipeline... pls it would be much appreciated

[@mikecuhh1175]

@Jarods Journey do you have any resources for voice models, or do you train your own? All of your voice models sound much better than what I could find online. What settings do you use to train your models at?

[@Jarods_Journey]

I train all of my models using RVC v2. No real special settings, I just clean and curate my data so it's crystal clear input audio.

[@mikecuhh1175]

@@Jarods_Journey Trained a couple models already, came out great. Thanks for all the help between comments and videos.

[@hardikjain2992]

HOW DO U CLEAN DATA@@Jarods_Journey

[@Zarius_The_Archlich]

Anyone know why, when I use client, all my input and output options disappear? It was working fine, and then I just couldn't select them anymore. Edit: I figured it out but for anyone with the same problem, Ill leave this here. It only occurs when you make a shortcut version of the start file and try to run it. The way to fix it is to open the original start file, and switch between server and client on one of the sample voices. If it doesn't work just repeat until your input and output options reappear.

[@Odyssey_ACNH]

Using a RTX 3070 with: Chunk 256 Extra 131072 Sounds perfect on these even with the half second delay!

[@DestinCool]

Hi Jarod. I'm trying to use my bluetooth mic as an input for voice but it is not showing in the input options! Any help in this regard will be appreciated!

[@katbwoi]

I hope they will make it in VST3 format so i can just put it on the daw track which my microphone is routed through. it would be so amazing holyy

[@stnhndg]

Considering how calculation heavy this thing is it's unlikely. I might try to make a VST3 client for this stuff.. but I couldn't find any API description on their page.

[@PsychicType]

why cant you just use VAC and use VAC Line in as your input mic in your DAW?

[@katbwoi]

@@PsychicType hmm ill try that ty!!!

[@snackingbest6740]

it feels like the voice changer is picking up too much background noises and saying things I didnt say is that normal?

[@basspig]

I assumed that the clear setting button at the top would clear out a slot for instance I've been testing a bunch of slots and I want to set them back to the default blank but apparently clear setting does not do what I thought it did in fact it seemed to screw up the whole program.

[@MultiDarkZen]

I have an AMD CPU with nvidia graphics card so idk if it matters which one I use right?

[@Red-VR1233]

great video! keep it up!

[@weeboooooo]

Hey I tried to use this today but while my mic is on sometimes out of nowhere there is a robotic static.. is there any way to fix it?

[@mvproductions8543]

Hello, I have a GPU but for some reason it’s not selectable in the processing option

[@randominternet713]

Why is my voice changer says no embedder? When i changed into a custome voice it says failed idk why it says fail i cant even hear the voice changer

[@RubySapior]

For High cpu usage problems.... 1) Buy $10k PC setup. jk 2. Set index to 0. Even setting it to Index: 0.1 maxes out CPU 3) Set Extra to a lower amount. Higher Extra uses more CPU. Lower Extra uses more GPU. ( use 16384, any lower and doesn't decreases cpu usage, any higher and cpu usage doubles. 4) Use crepe_full (uses most gpu) 4) S.R. to 48000. (dont go beyond as echo forms.)

[@MultiRv123]

this works for amd gpu, i was getting crazy delays. followed this settings and now its only 2 seconds delay. thank you!

[@lamby5391]

thx bro now im only getting a 1/2 second delay on amd gpu

[@aeon7659]

my voice changer worked perfectly when i just installed it, but after reopening it, it started to give errors like "GL is not supported" and refuse to work. any suggestions how to fix this?

[@sharoron]

how to reduce the res? when I start my res it actually reaches more than 1000ms, I think that's what makes my voice not come out, is there a way to reduce it?

[@kobi2643]

hey, is there any difference in method which rvc works here or in any other fork ?

[@ukilumi4345]

so whenever i boot it up and do all the settings and whatnot, it never changes my voice even if i follow every step, i can hear my voice yeah and ive already fiddled with the tune, yet nothing changes even if i turn it on

[@MayoDealer]

Hey there Jarod, I have a question regarding "Cuda Cores" / Cuda core compatible graphic cards. If i get this straight : Your GPU must be a good one , i.e: a newer and faster one (That much is clear) but it also must have cuda cores, since all the models are cuda core based. So a 1080 ti which is a strong gaming card and a favourite of many gamers cant handle the ai voice changer program. The program defaults to CPU usage. Thats what happens on my end with a 1080 ti (which has no cuda cores). The solution would be to go with the OTHER download (what you called "for amd users". Is my assessment correct?

[@calebpeters191]

CUDA cores are included in all modern GPUs actually. the software will default to CPU always. The benefit to having a higher end card would be the faster GDDR6 memory, larger amount of VRAM, and many other factors. I am not sure if RVC uses CUDA cores in any way, but a GTX 1080ti should still work, just increase the delay, run it through server, and have the audio encoder set to ASIO or WASAPI if you can. Note : Only use the alternate AMD version if you have an AMD GPU, if you have an NVIDIA graphics card, use the standard download you already have. I tried out the software with my GTX 1650ti on my laptop and it worked pretty well, once set to a 5sec delay. Your GTX 1080ti should do far better then my mobile GPU.

[@MayoDealer]

@@calebpeters191 I have done exactly that, but for me the delay needs to be really high to sound any good. For some reason, the GPU still sits at only 30% at max. The sound is still robotic and just sounds like i am a 8 year old kid with a generic voice morpher. Besides, sometimes (rarely) my CPU goes to 99% and on the more common times : 20-30% (5800x3d), which made me think that the GPU was ignored and cpu used instead

[@MayoDealer]

@@calebpeters191 thanks nonetheless dude

[@Jarods_Journey]

I believe the 1080ti does have cuda cores... But has 0 tensor cores which allows for much more efficient cycle usage of the GPU. CUDA should still be your best bet, but I'm not sure why it's not noticing your card

[@MayoDealer]

@@Jarods_Journey I just bought a 4070 ti a few hours ago, and let it run. The performance is LEAPS better, thanks for the answer Jarod

[@DesuVR]

I find that the DirectML version (AMD) tends to randomly stop working and sometimes my GPU driver would crash, so that could use some more work to make it stable. And thanks for this guide! I barely know what each option really means.

[@jesuisunroi5543]

Wait is your gpu recognized in the software?

[@DesuVR]

@@jesuisunroi5543 It is, it's an RX 6900XT.

[@cuhtwo]

how do u get it to use ur gpu mine only uses the cpu even on the directml version 😭😭

[@jesuisunroi5543]

@DesuVR wtf my rx 6800xt is not how did you do 💀

[@DesuVR]

@@jesuisunroi5543 Honestly, I don't know if it's even using the GPU at all, I get ~50-80% CPU usage when RVC is active. I thought you meant if the software worked at all on AMD, my mistake. ^^; However, I got it running okay-enough on my 5800X3D with these settings; INDEX: 0, F0 Det.: harvest, S.Thresh.: 0, CHUNK: 320, EXTRA: 4096

[@joshjaestep2110]

my voice echoes and i can hear what i say again 2-3 times any suggestions?

[@thicchoudini2044]

Hi! just wanted to ask, can I use this app to change my pre-recorded voice?

[@PaiChen]

Great video !

[@6262x]

sometimes it works when i use an audio file (i have no gpu so its slow) but other times it just creates popping noise? it seems really inconsistent why is this?

[@jeremiahwilting5056]

I've found using this in games causes your mic to cut out and stutter, as well as spiking CPU usage. I hope in the near future it's even more optimized ^^

[@lowenevvan8619]

It's to be expected. The results outside of games are when it's able to fully utilize your GPU. While playing a game, the game is eating some amount of resources. Ecspecially so if the game isn't able to run at a steady framerate, which very well causes the voice client to have unreliable processing times.

[@iamgnud1092]

Have you figure a solution for that yet? Bc recording or even ingame mic check, it sounds fine. But people ingame hear it stutter alot

[@ivw1286]

Hello sir, do I need to download any extra files prior to downloading these as shown in this video, or will everything work just fine when following the same process in this video? I have heard you talking about downloading RVC first or maybe I am mistaken. Thank you.

[@Jarods_Journey]

You will need to download or train AI models for voices. It only comes with 4 preinstalled

[@ivw1286]

Thank you, sir, for replying. But I am done downloading the software but I think the voice changes often say things that I didn't say and weird noises and twist echo. I have an AMD potato laptop with just 4gb vram and 32gb ram, in the gpu drawer I see just gpu on/off option no room for choosing between GPU or CPU not sure why that is like that on AMD played with it all day yet the software hasn't been able to say a single word of mine only making a weird noise and short utterances. Not sure though, do you think upgrading the AMD drive would make any much difference? Or maybe time to change to Nvidia. Note. The laptop comes with a hybrid gpu AMD Rx / Vega 8. I think the Vega is interfering. 🤯

[@justaperson8852]

​@@ivw1286I have a rented A100, a $10,000 GPU, and it still struggles a little. I don't think you meet the minimum requirements to even run the program.

[@blazingfiregaming]

vb cable causes popping when i talk through it voice changer is clear but audio that comes from the cable to talk on discord sounds robotic and idk how to fix it

[@martinhoffer4244]

Whenever i run it on my pc the voices sounds TOO robotic, training them would make a dif?

[@vlad1866]

Can you tell me why when I say something through the AI ​​it keeps repeating it?

[@CodyHurstOfficial]

Thanks for the video, but when I browse and select the onnx file in one of the slots, do I just leave the index blank? Because if I select the onnx file, then click upload and try to use the voice it doesn't work. Also, with piper it seems to require a json file as well but how is this generated? rvc doesn't give this to me.

[@Kryptonaaayt]

I tried running this, but its only white screen, what does it mean?

[@SnorrieMan]

there is an echo after the first sentence and it gets so squeeky till u cant hear it anymore

[@cloudshifter]

I have successfully put on voice models nad played around with them a little. Next time I opened the program it waits for web server indefinatelly and the voice changer native client pop up is permanately all stuck white. (Yes I deleted "stored_setting.json" it changed nothing)

[@MrCParadise]

i really want to try this but my 1060 says no.

[@finecut]

Hey I'm little confused but i wnna install it so which vid of urs i should follow thx

[@mafia-mr5pd]

hi, is that possible to run the server voice changer on a rdp(windows server) and use it on our computer?

[@user-oq6ob9td9w]

Can you tell me the voice model and settings you used in the opening? please.

[@untred]

Im having issues where everything comes out in short breaths or stutters, barely comprehensible, I have pretty good specs and I tinkered around with as many settings as I could but I always get the same result, how do I fix this??

[@ThatGuyMj]

Same

[@nekophoenix9078]

I have an AMD RX 6950 XT gpu and a i9 12k processor, are these considered good specs for the voice changer?

[@TheWonderKitter]

I have tried to install it and get it to run, but something is missing and I have not seen a video on installing and getting the client to run.

[@shamedategames5740]

because the RES comes out with 8000 up to 29000 you can lower it because it takes a long time to load the voice and sometimes you don't even hear anything

[@oanhkhongngu7176]

Why did I download it, turn it on and go to the voice changer client, but the GPU section shows (cpu, gpu0, gpu1, gpu2, gpu3) while my computer has a Geforce RTV 3050 Laptop Gpu card?

[@shadiyy3636]

i get some repeated when trying to hear it myself, the first time its fine and its nice to hear, the second time and the following is just distorted sound of the first one, how do i fix that?

[@takezomiyamoto1390]

there is no way to mute the output feedback, right? so that, when you talk, you don't actually hear yourself back but still can be recorded or heard by other people....

[@totolindo00x21]

Tengo el problema de que se escucha trabado, son puras sílabas lo que se escucha, ¿Alguna solución?

[@RionaSL]

you saved my day !

[@linuxtuxvolds5917]

Thank you Jard!!!

[@ponzugenshots]

hi is this possible to work on laptop? i tried but it doesnt read my voice and all i hear are cracky sounds. is it bc i dont have gpu, what is the solution for this

[@user-vo8tq6hk2i]

When I use the output Digital Audio Cable driver and select it as my microphone in discord it works just fine except that when someone else speaks it creates an echo. Adjusting the tresh hold in the client does not help, anyone having any idea on how to fix it?

[@alicial5071]

thanks s omuch helped a lot !` one issue though, when i press start and i speak it works fine but then it cuts out and then comes back smooth again, then cuts out and then back. how do i fix?

[@Zentomi1221]

Hey , how i can fix if my input not appear my mic and the select vc button is disappear ?

[@elpis8784]

Is there any way I could possibly hook this voice changer to something like discord? I think it'd be fun to mess around w/ friends of mine w/ a model!!!

[@billerpjc274]

Bro. You are too good . A wizard

[@elpouletto1795]

the button for onnyx file doesn't show up any idea why ?

[@kongk5772]

do you have any idea what happened? The voice changer was running pretty well a couple weeks ago but it looks like they had an update and now all the voices seem slurred and choppy, it was perfectly fine a couple weeks ago and I've made no changes to the settings, i don't know what happened, it affected all my models

[@Jarods_Journey]

Not sure, this would only have happened if you had installed a newer version of it. I would recommend just use and stay with the version that worked for you previously as there seems to be issues using other versions

[@kongk5772]

@@Jarods_Journey I’ll try and play around with it, does it remove your models if you install it again?

[@Jarods_Journey]

@@kongk5772 yup, you gotta start from scratch

[@kongk5772]

@@Jarods_Journey so far I've redownloaded everything, and everything is up to date, I optimized my settings the same as the older versions but for some reason, the millisecond per response keeps stacking, all the way up to 30k ms per response all the while it's eating my CPU, this didn't happen before and I'm not sure why, do you have a fix for this?

[@BlackScream77]

which version is the one that works for you? even at highest chunk i cant get it to sound good

[@xqzwlv]

why when i run the program my right earphone starts to emit static and only the left earphone works? how can i fix this problem?

[@CEngi]

amd pcs dont work with this unfortunately, is there a way to use rvc real time cloning with colab? and use it in game voice comms, etc

[@Jarods_Journey]

You'd have to try to directml version, but yeah, lots of instabilities there I've hear. Can't run this specific one in colab due to it requiring an exe, but there is one built into RVC that I have yet to take a look at.

[@Nebularban]

I notice my voice cuts out a lot while speaking. So it misses a few words sometimes. Whats the best way to solve that?

[@Radhaun]

I'm also having this issue, so I'm tagging on to your comment.

[@VALKOU-X]

UUUUUH HELP, since i downloaded this "AI Voice Changer Client" for some reason is not working for "me only" but who knows maybe people are having the same problem as me cause when i open the client and use it, none of the voice changers are clickable, like I'm sorry why is it not working I'm confused can someone help i need answers please 🤨❓

[@lollol8768]

Just a quick question, the voice changer works perfectly but it always cuts off at the end of the sentence. Any clues why?

[@yoAventus]

+1

[@LordAlgumaCoisa]

same

[@Ridixsys]

May I know how I could replace or remove a model from the directory?

[@Kaikai-zd9pd]

Help, how to turn off playback? when i talk it repeats after me to hear what i sound like but i want that off

[@jeanpauljimenez1112]

Can you help me out? With when im recording I hear voices in the background? Even tho Im not even speaking

[@clumsy_en]

Index setting still matters when using model without index

[@KEVY_VAL]

I still wondering how u can use this voice changer in a app like discord

[@Vqz0]

hey wanted to ask where you can all that extra models ?

[@yuikoo0613]

help!!! my ai keeps repeating what i said after i finished talking. it like mumbles exactly what it just finished saying

[@PalashDandge]

Hey, i have integrated with teams but for me its working perfeclty but the person at other end in the meeting gets its hears his own voice back ? what is the solution for this ?

[@mrgoosetavo]

What to do if I have a white screen in AI Voice Changer Client? (I have windows 7)

[@nerro984]

1650 Super and even 1060 are doing surprisingly fine using this tool.

[@Jarods_Journey]

Awesome to hear! I had great success on my 2070 super so I'm glad to hear the pascal cards are still chugging along

[@raidentatsunoko]

hello mind telling me what settings you are using? i have a 1660 super and its super laggy nothing is understandable

[@soluckymoon]

@@raidentatsunoko same, i have 1660, but voice very bad and laggy

[@raidentatsunoko]

@@soluckymoon sad, still same to me.

[@melody-dede]

@@raidentatsunoko have youn found a fix?

[@gamer61223]

can i use it while playing valorant or would i get any problems with vanguard (valorant anti cheat)

[@chalkymilk]

I have a m2 pro macbook but this voice changer will not work at all for me. The software will load up fine and the menu will load but when I try to use it it does not work.

[@wyvern404_]

Praying for the day it works on AMD, i'm currently stuck with a 5700XT.

[@godlikeghost4839]

please tell me a 1050 ti and an i5 7300 could do this somehwhat okay??

[@kyleacosta7021]

is there another link for this, it says too many people have downloaded it yet or something

[@troleito2373]

My problem is that no matter how much chunk I put in, the changed voice is heard too late.