How to replace a Dodge Ram ignition lock and door lock cylinder

[@jordanlopez5683]

Super informative, great explanations, clear instructions, thank you.

[@ericcorse]

Great video. ought to help someone doing these tasks.

[@mlieser1230]

Excellent video.

[@JasonTheMunicipalMechanic]

Thank you I appreciate that.

[@ignaciogarcia7352]

Hey Jason where did you get the parts for the door cylinder??

[@JasonTheMunicipalMechanic]

This is the kit I got. www.ebay.com/itm/133141195309?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sTHSYYNQQuC&sssrc=4429486&ssuid=xttdK6ydQ5u&var=&widget_ver=artemis&media=COPY

[@ignaciogarcia7352]

Thank you

[@tedohio3038]

Wow what a lot of great detail, thanks.✝

[@Michael-B41]

looks like no halo around key lock so no programming needed? imy 2005 doesnt have no halo around cylinder but has a grey key someone must have bought a grey key im guessing chipped but it doesnt require it

[@Michael-B41]

i mean thats all i can figure out because i looked up what it would take if it had a chipped key there should be a black round thing connected to a small control box at key. its not there which is fine that means i can have a spare key made for like 5 bucks

[@billsmith4490]

Glad to see you post again. Did you guys get to go camping very often this season? Hows the apprenticeship going?

[@JasonTheMunicipalMechanic]

I’ve been trying to post a video at least once a month. We went camping a few times, Not as much as we would have liked to go. We will probably go more next year. My daughter is out on her own doing pretty well working at a local dealership, so that’s good.

[@coldcrush5921]

Hey Jason video helped a lot. Got mine removed. Maybe you might be able to offer some advice. I've had a bad parasitic drain for some time. I tracked it down to the ignition switch. I have a bad key cylinder, I'm pretty sure I could start it with a screwdriver. I was wondering if this could be causing the ignition switch to stay engaged in some way when the vehicle is off.

[@JasonTheMunicipalMechanic]

The key cylinder and the ignition switch are separated. The key cylinder will turn a rod that will turn the ignition switch. If the key cylinder isn’t turning back to the off position then it could be causing a drain but my money would be on the ignition switch itself if you traced the drain to the switch staying on.

[@coldcrush5921]

@@JasonTheMunicipalMechanic The switches arent very hard on the bank, guess ill just replace that too since I already have it all opened up. Thanks for the help.

[@reelhoss3715]

Can you share where you bought this set?

[@JasonTheMunicipalMechanic]

I got this set from eBay. This is the one I got www.ebay.com/itm/133141195309?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sTHSYYNQQuC&sssrc=4429486&ssuid=xttdK6ydQ5u&var=&widget_ver=artemis&media=COPY

[@mrdoce12]

Awesome way of explaining and showing the process. You just saved me a bag of money. Thanks

[@edgarcastillo2804]

"...then u put the thing that i throw to the ground..." 10/10, sometimes u have to yeet that thing.

[@JasonTheMunicipalMechanic]

I get a bit of the butter fingers as I’m getting older.

[@edgarcastillo2804]

Torks 20? Hell Yeah

[@rtz549]

I'd remove all the wafers then run it like that.

[@JasonTheMunicipalMechanic]

You would always have the right key.