JBA long tube header install with y pipe 2015 RAM 1500

Turbo RAM - click link to see more • Lifted turbo Hemi truc...
JBA 1 3/4 long tube header with off road y pipe install and sound clips, fits 4th gen ram trucks 2wd and 4wd. This is a 2015 RAM 1500 4wd crew cab lifted 6 inches, 6 speed.
www.hotdamnrac...
Moe's Performance: www.moes-perfor...
Demon motorsports tuning: / 472961639812743
Hemifever tuning: www.hemifevert...
CORE 4x4 use promo code “Hot Damn” for 5% off! : www.core4x4.com
Facebook group: / 130176127592586
4th Gen RAM electronics use promo code “Hot Damn” for aux panel only and get 5% off: / 4th-gen-ram-electronic...

[@Tony-sg2nd]

Thanks for all videos it help me out lot I did true duals with long tube headers

[@HOTDAMN]

Thank you 🙏 I appreciate you! I hope for the best!

[@gregz4249]

I need to do this while I still can, getting hard to get up and down from the floor

[@HOTDAMN]

Same here, bad back.

[@gregz4249]

Did this guy use to do commercials I can’t place where I’ve heard his voice

[@HOTDAMN]

Truck was featured on custom offsets

[@Handicapkilla94]

Your truck Sounds nasty man, nice

[@HOTDAMN]

Thank you 🙏

[@monalisastuckman4363]

sounds like one of them peapole you see on tv in a dark room talking with a voice over so they can tell who they are

[@abelscaliber7969]

Monalisa Stuckman ol witness protection sounding ass lol

[@Ayeitsberner23]

Abels Caliber 😂😂 I’m fucking dead

[@ChrisCarpenter-d5e]

Or young guns. We're in the spirit world. 😂😂😂

[@jamescasello8100]

Awesome !! Exactly what I wanted to do to my truck. Just got a 2006 2500 4x4 Ram. I am guessing that those headers would fit my Ram ?? I love what you did to your Ram, it looks absolutely amazing, and no rust anywhere. I am up in NY, rust country to be exact. I also like that Demon Program Thing you got on your dash. I did not see any Cats in there. Can you run without cats and just put the O2 sensors in ?? Any engine lights go on ?? Anyways all I can say is you have the Mother of All Rams.

[@HOTDAMN]

💪 the truck is fully built and turbocharged these days, thank you 🙏

[@RED2K2TIMMY]

With the jba short headers mate up to the stock exhaust

[@HOTDAMN]

I think they do, but I’d double check.

[@RED2K2TIMMY]

KUSTOMBLACK MOTORSPORTS I definitely will I’ve got a broken bolt and thought I’d just replace them while I’m at it . Thanks for the reply and doing a killer build on a ram man

[@user-zg8if8hf6x]

Well hot damn bud

[@HOTDAMN]

Hell yeah 💪

[@Atom_187]

I jB weld a radiator before. I had a hole come through on the top and after I patched it lasted 8 years🤘🏼

[@HOTDAMN]

Strongest bond! I could never get the coin out at the parts store. I miss that display, should have been able to win a prize.

[@Atom_187]

@@HOTDAMN lol

[@Mike-sr6gd]

I jb welded mine during COVID . No auto parts stores had a new one so I jb welded it. To this day it's still holding.

[@dpuente73]

Hot damn!!

[@HOTDAMN]

Hell yeah 💪

[@raymocandler]

I'm amazed that the ypipe cleared the kicker bars. That was tight! Nice install.

[@raymocandler]

@@stumplimit they are bolted in place to the lower control arm crossmember and the transmission crossmember, really no adjustment. They don't move at all with the suspension if that's what you were asking. They are stationary. If there was contact, you could probably fab a spacer to go between the upper bracket and the trans crossmember to lower the bar down and get a little extra clearance from the ypipe.

[@russellboyd5262]

I put long tube hooker headers,high performance exhaust manifold,flowmaster 40 mufflers with y pipes,on my torch red 1977 corvette.It added 22 horsepower,and the sound is SICK,for sure.russ.

[@HOTDAMN]

Badass!

[@sacracalifas19]

No header wrap?

[@Ghosty.21]

Take a drink every time he says Hot dam. Haha good show.

[@codyinverarity1092]

Haha hot damn!

[@gsgaud]

Just put AMR long tubes on my nineteen ram new style with a catback. Sounds ignorant as does yours! Good video!

[@HOTDAMN]

Hell yeah!

[@kelinjohnson7421]

"hot damn" i just ordered my long tubes now i gotta figure out how to fuckin install them on my 2009 rt hemi charger sum bich

[@HOTDAMN]

Good luck, hopefully it goes smooth. It’s just time consuming as all hell. You’ll get it.

[@BBDos]

where did you get that diff girdle please?

[@HOTDAMN]

purplecranium.com

[@13ceb]

Yep. Nuttin better than a uncaged Hemi.

[@vamt31872]

Did you have any problems with the intermediate steering column rubbing the headers on the driver side

[@HOTDAMN]

No problem

[@anthonyiadarola1201]

His voice sounds like he’s possessed lol!

[@clipvue222]

Thanks for the video I am about to install some long tube headers myself and this video was very helpful thank you

[@HOTDAMN]

Hot damn hell yeah!

[@jwnewman75]

The hell with that two pipes into one 3" You got long tubes make that shit a true dual exhaust.

[@HOTDAMN]

Definitely a good idea, money is my only wall 🤣

[@RockstargamesgtavI]

I getting my 1500 17 hellcat swap!

[@HOTDAMN]

Hot damn hell yeah!

[@canadaplace2be176]

No but u have a garage bonus. No problem at all dog!!!

[@canadaplace2be176]

No this truck sweet. All nice shit. Ya his voice is ok. When he stops that over layin.

[@HOTDAMN]

You the man!

[@Drunken_Hamster]

Wait till you get a cam. KRC 210x advanced 4 degrees, or sidewinder would be your best bet for torque, with the sidewinder being more plug and play than the KRC. This is only information that I've read, so do your own research.

[@BretBunton]

Is that your real voice?

[@basketofdoom7401]

no its not, this dumbass adds an effect to make his voice deeper, and its cringey as fuck.

[@leonmoparneal3892]

Basket Of Doom hell yeah I hate that also can’t even watch the video because of that

[@coltenlang2085]

This guys too white to edit his voice like this, and to top it off he looks 140 lbs in the truck reflection

[@darrellsyrnyk6875]

Sounds awesome Hemi brother !!

[@HOTDAMN]

Hot damn hell yeah 😎

[@andrewdenine1685]

Your nuts bud. Love the videos

[@HOTDAMN]

Hot damn hell yeah!!

[@jasonneal]

Yeah boi Take dem resonators off, slap a 40 series single in dual out Flowmaster on

[@lukepomerleau4653]

The reason I haven’t done it yet? Well, you explained it. I am patiently waiting for your long term report... then I think it’s time I pull the trigger. Thanks for this one!!!

[@jeremygreiner6854]

Nice...Hot...Damn Jobby Job! Hell Yes! Glad to see you didnt have to dent any of the header tubes, or have any major problems.

[@byronjones2231]

????? You did long tubes and deleted cats but kept the muffler and resonators

[@HOTDAMN]

Ya, it keeps changing to kzbin.info/www/bejne/qmbTc3l_ia5modU

[@buffdaddy2032]

Use blaster instead of wd 40

[@HOTDAMN]

Hell yeah!

[@canadaplace2be176]

U should spray them with rust free

[@CatholicRenaissanceMan]

So how loud is it just idling? This is a little specific but does it exceed 60 decibels at 50ft? Trying to get approved for a off road vehicle pass to access trails at national parks. Lol

[@HOTDAMN]

It’s loud, to loud

[@htownsfinest87]

Damn! Really makes you appreciate the people who make content and take the time to set up cameras and shit and the voice gets annoying as fuuucckkkkkkkkk.

[@HOTDAMN]

👍

[@allaroundperformance]

Can you tell me the difference of a 1 3/4 and 1 7/8 longtube header please and thank you

[@HOTDAMN]

One is bigger than the other

[@Morbid611]

36:38 That makes two of us bro! And it ain't even my Ram. Sounds bad fuckin ass!

[@johnsineni]

Nice hack saw face, way to get on that.

[@HOTDAMN]

Lmao 😂!

[@carolynlowe8178]

Haha the end right on sounds sick I watched this video to see how to install this is my next uograde,lol I see I’m on my wife’s google account

[@chadpowell7983]

Dumb question but here goes...so I'm replacing shorty headers with long headers and the problem I'm having is that the oem bolts are to long due to the mounting flange is not as thick as it was on the Mopar headers....what is the resolution to this?

[@HOTDAMN]

Don’t use oem, use ARP or equivalent.

[@chadpowell7983]

OK sounds good...next question is... heat shields are not used for aftermarket headers? And Is a tune necessary and needed?

[@DOC6.7]

Wants some new headers for my 5th gen . I’m thinking AFE or the ARH in moes sight. Or you thinking something else. Respect what you’re doing and that’s why I’m asking. Thanks from the North!

[@HOTDAMN]

Both of those choices are fantastic. Choose one of those. Thank you sir!

[@masonstgermain5336]

I might sound kind of dumb, is that a nos blow out that comes out your hood? I want to do it to my hemi

[@masonstgermain5336]

If so best place to get it

[@HOTDAMN]

I got my kit from moes performance, it is nitrous.

[@bailey9r]

32:05 Absolutely correct! You can't have anything "dingle-dangling" I know of a guy that got arrested for exactly that!

[@HOTDAMN]

😂

[@brayanvazquez7857]

Where did you get that engine cover

[@Mr.NEStalgia]

Did the truck being lifted make it easier ? And how did you do your rear O2 sensors ? Did you use antifoulers ? Just wondering cuz i have an all black 2014 Ram 1500 Express with a 4 inch lift ... And ive been looking at headers for a long time and i was worried about the cats but now im thinking about deleting them cuz it would be cheaper and easier and figure it may even give a little more horses .

[@HOTDAMN]

Being lifted made it way easier 😁

[@mattcass5711]

your face when you started using the hack saw... LMAO bro i was dying

[@HOTDAMN]

🤣

[@andrewelmer9266]

What did you do with dipstick? I had to cut the mounting tab at bottom. Then bent a little bit and went between the primaries

[@HOTDAMN]

Lokar ED-5015 flexible dipstick tube.

[@davidbetancourt1of1]

Is this your real voice by the way? Kinda sounds like mine 🤣

[@HOTDAMN]

🤣

[@jmhm17]

Man... must be nice working with NO rust lol

[@HOTDAMN]

My truck was totally rusted, I fixed that mess.

[@jmhm17]

BUUUUUULL SHIT! You live in AZ. You wana see what my truck looks like? You would of snapped every manifold bolt and been heating the fuck out of those clamps to break em loose. No penetrating oil in the world would help you here lol

[@jakecumpston5978]

Trying to install my shorty headers on my truck as well but can't seem to get to those bolts on the bottom and on the corners with the clearance. Is there any tools that helped you out or anything you can reccomend? Thanks

[@HOTDAMN]

Swivel joint 😁 and gloves to save the knuckles.

[@toreyyoung1518]

Hot Damn she sounds Good!

[@HOTDAMN]

Hell yeah!

[@craigmac1516]

Hot dam...... That's one hell of a ram.....

[@wickedcrypto6004]

Sounds bad ass what type of exhaust mufflers do you have?

[@murphygaven1]

im looking at getting the jba longtubes but they dont show the y pipe on the website?

[@20jedidiah09]

Damn that's sweet soundin. Good job.

[@ericlyons2852]

Hall did you re-tune for long tube headers?

[@HOTDAMN]

Custom tune, you can go to a local shop or get an email tune.

[@davidmiller7074]

the sawing face: bravo!

[@robertmelroy2772]

So I just did the same installation on my truck. Question does your valve train sound louder with the headers compared to stock manifolds?

[@HOTDAMN]

Yes it will sound a bit louder

[@AnayanationAutoDetailing]

Sounds great!

[@HOTDAMN]

Blew my top off!

[@vinciserrano3012]

How did you get the custom tune?

[@HOTDAMN]

Add the custom tune with purchase, if you already have a diablo then buy a custom tune off Hemifever’s website www.moes-performance.com/mobile/Product.aspx?ProductCode=T2-PCM-EXCHANGE

[@1Antieau]

I see the resonators are still installed, is the muffler still there? Cuz hot damn, she sounds mean.. looking to do the same thing with my 2014

[@chadpowell7983]

Yo hot damn man whats up...got the long header with super 10 install finished...sounds bad ass...some think its a little loud lol...but why should I go with hemifever tuning? And not a tuner shop close to me? I'm in the process of making my selection and would like your genious hot damn input!!!

[@HOTDAMN]

Hemifever I guarantee will make it run better and faster just on experience alone by email/remote tune. All the fast trucks are email tuned. Hemifever will take you through a process of data logging. Hemifever will be able to see how it actually runs daily driving and racing. He will make the adjustments as needed. Drag and drop the email tune attachment, upload and done. So easy and right in your driveway. Free revisions.

[@chadpowell7983]

Its funny you say that...I was gonna go with hemifever tuning from the get go but I wanted to hear pricing from around the Cincinnati/Dayton Ohio area and their prices are ridiculous....decision made 🔥 hot damn genious 🔥 lol thank you sir!!!

[@Bucball]

Man this was hot damn funny. Also made me just pay for someone else to do my new exhaust 🤣🤣🤣

[@HOTDAMN]

I don’t blame you 🤣

[@satchifunkilus]

How the hell do you get the long pipe off the stock y pipe??

[@HOTDAMN]

Take the muffler off and pull it out 😎

[@Duke52DDOJ]

How's the quality of the headers?

[@HOTDAMN]

Pretty good, they do the job well. But they are far from perfect. It can be a pain in the ass. ARH is the way to go for ease of installation.

[@sixdubfive2178]

What's your opinion on installing longtube headers on with current dualed out super 10's (outlaw) + resonator delete? Any changes in sound possibly

[@HOTDAMN]

Definitely louder, gotta try it to see if you like it. It will probably sound great.

[@sixdubfive2178]

@@HOTDAMN will do.thx

[@Hugh_Jarsole]

Do you edit your voice separately or is the whole audio tone shifted? Asking because I'm curious if the exhaust sound is shifted or not in the video

[@HOTDAMN]

Not edited unless I’m talking, you may like this other channel better. I’ve changed the exhaust even more kzbin.info

[@HOTDAMN]

Little chop 😁 kzbin.info/www/bejne/r4XUg3-pqtV6sJY

[@markvigil7059]

HOT DAMN !!!! 😂🤣 good video tho thanks it will help when I do mine.

[@HOTDAMN]

Hot damn hell yeah!

[@waterboi18]

SOAB i was excited that no cutting would be involved. I'm glad i am watching this video because I don't have a grinder to cut off that damn "Dilly Dally"

[@nathancole9823]

Is your voice powered by a v8 because it’s the deepest sound I’ve ever heard.

[@HOTDAMN]

V8 cammed HEMI 😎

[@nathancole9823]

KUSTOMBLACK MOTORSPORTS lol awesome

[@WickedFabz]

Sounds good brother!

[@TheIrishPhantom]

Worst thing for me was the plastic clips that hold the O2 sensors on... like what the fuck they're on top of the transmission.

[@alexsj5790]

I’m usin my headphones 🎧 Damn it sounds super sick 😍.. holy fuck 😍😍

[@HOTDAMN]

Oh hot damn hell yes!

[@markd1199]

Good hustle man!

[@jwnewman75]

is this JBA from here in San Diego?

[@HOTDAMN]

Not sure, I ordered them through moe’s performance.

[@johnschwing2498]

Do you remember the part # for the kit? Went to Moe's and didn't see the jba headers but I did see the y pipe.

[@colestull4837]

What are you valve cover things called that day hemi and where did you get them

[@HOTDAMN]

3gcustomz

[@hardracer]

Your not required to have the catalytics?

[@TristianTate]

hardracer yes every on road vehicle in the us is required to have catalytic converters if it came with one

[@craigorr1]

Hey did you have to put a transmission cooler in and a larger pan after your headers and converter was installed ?

[@HOTDAMN]

No sir, I have been daily driving with no problems. Temps can get high in the summer and when driving hard. But the stock cooling equipment has worked fine. Just ran a pump at the track, temps stayed low.

[@craigorr1]

Sorry what do you mean you ran a pump at the track ?

[@gregz4249]

A pass

[@noahtwyman6338]

Are the gaskets that come with the jba headers good or should I buy oem ones?

[@HOTDAMN]

Oem

[@sergjavier1582]

What did you do about the dipstick issue? That’s the one thing holding me back from doing this. I’ll be damned if I have to mess with them hot damn motor mounts.

[@HOTDAMN]

Lokar flexible dip stick tube, haven’t installed it yet.

[@WeaponsMachinist]

Let's see some Hawt Damn performance gain data! BTW Your a mechanic!

[@HOTDAMN]

I can say the 0 - 60 is much better

[@jmhm17]

And hot damn you need an electric ratchet

[@HOTDAMN]

Yes I do 😫, I have an air ratchet but I hate bothering the neighbors with it and my truck is to tall to fit in the garage.

[@kodydukes2004]

KUSTOMBLACK GUNZ i put long tunes on my 2012 4x4 hemi single cab have diablo programmer on it and can’t get the check engine light to stay off what do I need todo

[@MyGraKat2]

He already said that he's not rich! 😂🤣

[@ShadyOne9]

“Oh hell no they put a dilly dally on here!” Lmao

[@HOTDAMN]

🤣

[@kvnparker]

The Big Show drives a Ram 👍

[@HOTDAMN]

Hot damn hell yeah! 😎

[@c6069]

What y pipe did you use for the jba long headers?

[@HOTDAMN]

Discontinued JBA y pipe.

[@c6069]

@@HOTDAMN do you have any ideas on what one will work that's close to it?

[@c6069]

@@HOTDAMN we order one and it wouldn't line up.

[@jamesbranner4029]

Hot damn great video man

[@vanillagorilla7898]

Where did you get the valve covers from?

[@HOTDAMN]

www.3gcustomz.com

[@eddiel4495]

Where can I get the long o2 sensors at?

[@lofa5262]

Where did you buy the Y pipe from?

[@HOTDAMN]

Y pipe came with my header kit, I think they are discontinued for the moment.

[@lofa5262]

@@HOTDAMN I have a broken bolt on one of my exhaust manifold and I am thinking of just installing long tubes instead on rebooting the manifold on there. Looking for long tubes with a y pipe. Most of the ones I have seen doesn't have it

[@757doby]

HotDamn man you got me laughing!

[@HOTDAMN]

Hot damn hell yeah! 😁

[@cecilcottongin8452]

“I gotta deep voice”

[@HOTDAMN]

🤪

[@studentplugs6586]

Yesssir 🔥🔥

[@tristanfritz4427]

Oh man. You are funny as hell, jaw dropping sound literally 😆

[@MrStingraybernard]

Did this pass state inspection?

[@ericvillagomez3641]

Ron Bernard wonderin the same thing

[@giuliocalvelli3202]

Just wondering, did you go back and re-tighten all the bolts? I would never have the patience you had doing this.

[@chrisfalzone5523]

Do you not own air tools??

[@HOTDAMN]

🤣, lmfao good one.

[@jasonrapp5169]

what y pipe

[@davidaz6392]

Did that void your warranty??