2017 Ram 1500 5.7 Long Tube Headers Dyno Results | Before and After Power | How much does it make

[@kennethpowers8995]

Seems about what should be expected. Everything I’ve seen shows the 8 speed to eat around 80-100 HP depending on wheel setup etc. so if that’s the case your stock pull was about spot on with the factory rating at the crank and then your tuned pull would be about 415 crank HP or so.

[@ReidPerformance]

@kennethpowera8995 yup! Some people still think I have no idea what I’m talking about lol

[@benben6054]

How can you tell if your truck has been tuned

[@ReidPerformance]

Usually by looking at the tune itself

[@lysias55]

So I could get the device and you can send a tune? I have a 17 Ram, AFE Twisted Steel shorties w/ intake and Carven exhaust. How to I unlock the ECM?

[@ReidPerformance]

Yes I could. You could also send me your pcm. I can unlock the pcm and flash the header tune on it and send it back to you

[@lysias55]

@@ReidPerformancehave any tips on those red plastic clips that hold it in? I do not want to break them

[@ReidPerformance]

I have a few videos that go through removing the pcm

[@ReidPerformance]

Removing the factory support cross bar will really help

[@Nick-dd2xg]

So how much does a tune like this cost? Can a completely stock engine without any modifications be tuned?

[@ReidPerformance]

Yes it can! Cost increases if you need the pcm unlock.

[@owenmeany3426]

Hey boss man! I have a 2016 ram 1500 with the notorious header bolt issue instead of throwing a set of oems back on I’ve been thinking of starting the upgrades. Do you know any full setups of headers back would rather buy a full kit. And does the truck need to have a tuner after the long tube header install?

[@ReidPerformance]

I believe Corsa offers full from headers to mufflers. Ideally, when you remove the factory cats.. you want to adjust the tune

[@lysias55]

Go with Kooks or Texas Speed long tubes

[@ericmandragona4635]

I have a 2018 Ram 1500 and want to have long tube headers installed. What is your recommended regarding a tuner afterwards. The only other modification is the cold air intake.

[@ReidPerformance]

Get yourself a HpTuners MPVi3 device. And find someone locally to tune it or I could do it for you as well

[@ericmandragona4635]

@@ReidPerformance where are you located?

[@ReidPerformance]

@ericmandragona4635 Riverside, ca

[@frivera735]

Get a Diablo tuner hp sucks your going to pay for the system plus tokens to tune its dumb

[@ReidPerformance]

@frivera735 diablo is the worst what are you talking about lol

[@bigboiyayo891]

How much do you charge to tune 09 dodge ram1500 5.7 rwd

[@ReidPerformance]

Tune fee starts at 400

[@cesarhuato6101]

About to get a 2007 6.1 srt8, do you have tunes available for it?

[@ReidPerformance]

Yup, I can custom tune those as well. Add e85, cam, bolt.. even stock tuning you name it. @cesarhuato6101

[@cesarhuato6101]

@@ReidPerformance how would i inquire for a tune?

[@cesarhuato6101]

@@ReidPerformance sorry this is the first time i would be tuning my car so im not familiar with a way to do it

[@ReidPerformance]

@@cesarhuato6101 dm me on insta

[@realitysux_0128]

Very nice! Good job on the tune man👍🏼👍🏼

[@almighty3.643]

What’s the best mods for a pre eagle 5.7 hemi

[@ReidPerformance]

E85 with headers is a great start @almighty3.643

[@matrix1171]

@@ReidPerformance one question, why e85 when there is a fuel mileage concern just asking

[@ReidPerformance]

@matrix1171 e85 makes more power than regular gas does. About 20-30 whp more to be exact

[@grahamnovak1629]

should pick up 25 from each the tune and the headers, 50 total.

[@ReidPerformance]

Just about

[@JOSH-bx5wp]

Do you ship to canada bro?

[@ReidPerformance]

I can, yes

[@kuhndog-1196]

Hey man,I have a real custom project I'm planning. G56 swapping my 17 power wagon. I have all the hard parts pretty figured out. Should all go together pretty easy, easy enough anyway. Tuning is my road block. Do you have an email or something that I can contact you on?

[@ReidPerformance]

@kuhndog-1196 [e-mail]

[@kuhndog-1196]

@@ReidPerformance thanks I sent an email over.

[@lrs333]

Do you guys send email Tunes I'm using Diablo i3 tuner to upload custom Tunes

[@ReidPerformance]

I don’t work with Diablo products. If you had HPTuners I’d be happy to help

[@jorgearguelles918]

whete you located?

[@ReidPerformance]

@jorgearguelles918, souther california

[@vidadelocojr298]

@@ReidPerformancedo you have an instagram account?

[@JLswatchthis]

I think my manifold is broken cause it's ticking at startup but goes away when warm, should I go to headers?

[@ReidPerformance]

Could be an exhaust leak. You won’t be disappointed with headers

[@JLswatchthis]

@@ReidPerformance ohh thanks for the info

[@Alvaritoo_rt]

🔥 1 3/4 or 1 7/8?

[@ReidPerformance]

@alvaritoo_rt these are 1 3/4 I believe

[@yasmineburns5966]

4x4?

[@ReidPerformance]

@yasminebhrns5966 RWD