JBCo Quick Tip: Dipping Custom Lures In KBS (28 November 2017)

[@michaelthompson1185]

I truly enjoyed chatting with you sister. My friend Willie, gave me the opportunity to speak with you!!!🎣🎣🎣

[@dbsa58]

Just dipped my first lures in KBS thanks to your videos they look great and so much easier than epoxy. :)

[@EGM1775]

Would you or do you sometimes dip it more then once like maybe 2-3 coats just once every hour for couple hours? Curious if it makes lures seem thicker and more glossier. I use the aerosol version of KBS and noticed it makes a huge difference spraying it 2-3times. Or Is the thickness of the liquid kbs just good by only 1 pass

[@watermelongrin]

What are you using for wires? I have used 2 part epoxy and UV epoxy, but nothing comes close to a professional look for half the times as KBS. I will put my UV lights to use when I winterize my plants in my shop for the winter.

[@simonelucchese8687]

Hi friend just a few question.... 1)Why do you put kbs in a glass bottle? 2) In Italy I cannot find KBS 8304, but I can buy 8104 from UK...what is the difference? Thank you in advance....

[@markecklund3125]

Thanks, JEN! A question I have is about those wires. How badly does the epoxy stick to the hang wires (and of course the hook hangers)?

[@laserdoc85]

Jen, How to you clear your vent holes on a popper lure. Have dipped some but my vent holes will fill up as the popper head cup fills up with the KBS

[@rdgurule]

Here’s a thought. After watching the seale concerns. Use a food sealer. One that seals canning jars. Suck the air out exceptionally well.

[@Jekyll424]

great idea!

[@billysanders7043]

The KBS clear coat is it the 8404, Thanks for the videos.

[@Jekyll424]

Here is the direct link. Quart size. Best value. amzn.to/2wfGtBF

[@urbanbassslayers]

@@Jekyll424 Best Arnold Schwarzenegger voice,"I'll be back".. haha..

[@urbanbassslayers]

Great videos! I am learning a ton watching them all. I was using the Devcon epoxy, and want to move up to the KBS. I think I am convinced that the kbs is much more efficient and cleaner than the Devcon Two ton.

[@Jekyll424]

I like KBS a lot

[@goldfinchtackleco.9282]

I keep getting little imperfections and pitting on the clear bills of divers. Any tips for this? I’m wondering if it’s an issue with them being cheaper blanks. Would curing on a lure turner help? Thanks for all the great videos. 👍

[@pescaconchuchin4277]

what product is the one that passes in the 4.7 minute thanks

[@Jekyll424]

The blue one?

[@quadse7en]

what do you clean it up with? water, alcohol, acetone, ect?? meaning brushes, airbrush, mixing sticks, and so on.

[@gottemoffthebottom7001]

Is there a certain size of wire you use or will a paper clip work and thank you for all you do❤

[@zzz7zzz9]

awesome video. exactly what I've been looking for. I've been interested in switching to the KBS. it is very hard to get ahold of though, but I have tracked down a source. I have heard it can be tricky, with trying to prevent it from hardening once opened. it seems this has worked for you. another trick, to reduce the air volume in the jar, is to add marbles. just make sure they are clean, glass ones.

[@Jekyll424]

Marbles? I’d have never thought of that. Brilliant! Thanks BandS!

[@robertcornelius3514]

Fake marbles dissolve. I should know.

[@chrisdodd4095]

How does this diamond epoxy hold up to the hooks marking up the clear. I make my own top water baits and pound then 8 to 10 hrs a day and have issue with hooks scaring clear coat. Thanks for info. Love your videos.

[@Jekyll424]

Hey Chris thanks for the comments. Takes about 5 days to really cure well but once it’s hard it’s solid. Every coating on earth will wear down eventually, I’d say this stuff is on par w 2 ton and Alumilite. Storage is the only tricky part

[@5660foster]

What about the parts you put your split rings and hooks. Do they clear on their own?

[@brandon000188]

Have you ever tried a mason jar instead of the type of jar that you use? Just bought my first can and looking for a jar to store it. Curious to if you had tried one and it didn't work well? Seems like it would have a good seal.

[@Jekyll424]

No go in the mason jar. Too much threat of sir leaking since it’s not one solid piece top

[@AGRscotty1098]

Do you brush KBS on jointed plastic glide/swimbaits? How do you avoid getting KBS on the joint?

[@Jekyll424]

Carefully brush on

[@kevsoutdoor7287]

Do you usually dip them one time only or another dip after the lure is cure

[@hermestrismegistus2163]

Love you Jen! You rock.

[@davidturben7684]

What if I'm doing multiple baits ten at a time how long do you have to work getting it done so clear don't harden in jar

[@Jekyll424]

You can dip 10 at a time, then get the jar sealed tightly after you have finished

[@aquaticnut86]

Hello, thanks for making all these great videos! Do you have any tips using kbs with poppers? I know they have the vent holes you don’t want to block. Thanks so much

[@Jekyll424]

Dip only one time. As long as your KBS has been stored properly, it stays thin. Immediately after dipping, hang vertically head up tail down. Add a “drip wire” to the tail eyelet to help pull excess clearcoat from the lure

[@chonch12414]

Great information. Have you ever put KBS dipped on a rotisserie like you have to do with epoxy coated? Or does the hanging not result in bottom build up?

[@Jekyll424]

Spinning KBS causes micro bubbles. Just hang nose up tail down and place a drip wire on the tail eyelet

[@chonch12414]

@@Jekyll424 awesome thanks. I just got some etex to try out. Going to get KBS next. Anything else to consider? I feel from a lot of reading these are the 2 real go to for clear coats. I love the ease of KBS but its pricey.

[@zzz7zzz9]

@@chonch12414 i used to use etex exclusively. I loved it, except that quite often it would fish-eye, no matter how careful i was with handling the lure. That reason alone, was mainly why i switched to kbs. No regrets at all. Dip and hang, it doesn't get easier. And, it dries much, much faster as well. What i do, to remedy the build up at the bottom of the lure(my lures have no tail eyelet), is lightly dab it with papertowel as it builds. It only needs fone for a short while, then it's already hardening enough that it stops.

[@mikeszabo119]

Love the channel, have a quick question. How long after you finish painting before you dip your lures?

[@Jekyll424]

About an hour. Great question

[@mikeszabo119]

@@Jekyll424 thanks, been waiting 24 as I wasnt certain.

[@fishingwithhoffman7365]

I watched this video several times. And i noticed you did not stir the kbs. And it says in instruction to mix the crap out if it first

[@cdgarrett1]

I bought Minwax Helmsman Spar Urethane clear gloss with exceptional protection from sunlight. I hope it works. No one says what exactly it is they use for clear coat dipping.

[@Jekyll424]

I do. It's KBS Diamond Strength Clearcoat. Link w coupon in description.

[@cdgarrett1]

This stuff is much thinner than I thought. I’ve had to dip it twice and still doesn’t cover like KBS Diamond Strength Clearcoat.

[@fakiirification]

that spar urethane is tough as nails after it cures. takes a while to cure tho. I top coat wood tables with it. stands up to hard use easily.

[@zzz7zzz9]

well, I finally got some KBS this summer. almost have a couple batches of lures ready for painting. question. i'm guessing it's not possible to add glitter to the topcoat when using KBS, is that right? I'm used to using etex and a rotator, and it's eezy-peezy to add glitter or what-have-you. but using a clear that hangs and drip-dries, seems like that option is out.

[@Jekyll424]

I sprinkle glitter on the hanging lure once I’ve dipped it. While the clearcoat is wet.

[@zzz7zzz9]

@@Jekyll424 good to know, thanks.

[@jamesnash8227]

Did you ever say anything about that lobbing on bottom question? I’ve pretty much fixed that just by going by and cleaning it up a little til it hardens enough but I still have some issues with that ridge developing on the backs or bellies just at the bottom, usually with tiny air bubbles in it. Not sure about that because it appears random but I know I’m missing something.

[@Jekyll424]

On occasion I get a tiny bit of pooling, I clean it too. As far as bubbles go, that’s only ever happened when I’ve done something wrong, like prolonged air exposure, or accidentally changing the compound of the KBS

[@robertoorozco679]

Nice video.where did you get this extra fine glitter?

[@Jekyll424]

Walmart 😎

[@Rainbolt308]

How do you hang a popping bait after dipping?

[@jtcasting9552]

How many lures do you suppose a pint of this can do? I’m trying to figure out whether to buy this or devcon

[@Jekyll424]

200-275

[@MrMinnesoda]

Sorry if this was mentioned. Do you do multiple coats or just one?

[@gregholley1299]

Where do you get the jigs that hold your baits while painting?

[@Jekyll424]

They are called helping hands. There’s a direct link in the description section of the video 🙂

[@unclejaysfishinshack]

Thanks for the how to video. I've been using envirotex for years but I am looking to try KBS. I have one question. I do some lures that are 10 plus inches long. Can the KBS be brushed on?

[@Jekyll424]

Yes it can. I use it for swimbaits frequently. I generally wait 8-10 hours between coats.

[@hillcountryswimbaits2112]

@@Jekyll424 What brushes do you like for brushing on KBS

[@Jekyll424]

Any artist flat brush is good, as long as the bristles stay intact. Craft brush multi packs from Walmart or Amazon tend to be the most cost effective

[@hillcountryswimbaits2112]

@@Jekyll424 thank you for the reply! Can this clear work well brushed on and spun with a rotisserie as it cures?

[@Jekyll424]

Depends on the clearcoat. NEVER spin KBS

[@gerardrios7206]

Hiiiii . I am from Spain. I would like to know what varnish you use. Thanks a lot

[@fishingwithhoffman7365]

Anyone else get what looks like residue on the bills? I see like a fine residue on top of my kbs. And it sticks to the bill. I hate it

[@davyscustomlures7009]

Thanks for the video that actually helps me out very much cuz I always get the build-up at the bottom thanks for the video I liked it

[@Jekyll424]

+Davy Starkweather glad I could help. Definitely need to give Michael Orensteen a big thanks as well. I think in a way, we are all conduits of others wisdom. Best to pass it forward! 😊

[@paulbowkunowicz6960]

Hi....were can I get the wire from....will paper clips work

[@Jekyll424]

I get my wire from Walmart where the picture hanging items are, in hardware, but it’s also available online. Yes, paperclips will work

[@paulbowkunowicz6960]

@@Jekyll424 thanks Jenn...Thanks for the help...best Lady out there

[@rogerluli]

I fish with old wood lures...Most have cracks in the paint or hook drags with paint missing...The more they get used the more of the old paint flakes off...I am looking for a preservative to coat these baits with to protect the original finishes...Is this KBS product the answer ???

[@Jekyll424]

Yes! I think they will be much better off with a fresh coat of KBS

[@yakman619]

For those of us just exploring lure making, how well do the KBS Clear spray cans work for painting lures?

[@Jekyll424]

No personal experience with them myself. I would recommend you chat with folks in various lure making formats online, Facebook has several. You'll get an array of opinions, but seek out the ones that are fact written 🙂

[@yakman619]

@@Jekyll424 Thank you! I'm going to take a chance with it for simplicity sake. We're only experimenting with simple poppers the first time around, so not a huge deal if it doesn't pan out, haha. Thank you for the advice and videos!

[@calebdowling8651]

Just did some myself with the spray. It’s nowhere near as tough as the quart. Just ruined four of what might’ve been my best paint jobs. Also beware, sometimes for no reason between coats it might crinkle

[@yakman619]

@@calebdowling8651 Thanks. I guess it'll do while I figure out some simple designs. Working with bass wood...managed to make a sinking popper first go, lol. Sorry to hear about your lures!!

[@brentmatthew2155]

Hey, how do you get rid of bubbles that form after it hang for a few minutes. I am dipping it slow just like you show, but I keep getting bubbles just minutes later.

[@zzz7zzz9]

I really want to try KBS, but i dont think my lures will enable me to. My problem would be how to hang them so they could/would drip properly/adequately. I make my own lures, out of wood. I have 2 designs, but neither have a loop at the tail. My eye-hooks are on the belly, about 1/3 up from the tail, and the other, the tow point, is at the front, in the cup-face. My other style, has no eye-hooks at all. Has a cup-face, and then a through-the-body hole, at a 45 degree angle, coming out on the belly. And i rig with a chain or barrel swivel running through the body. I can't, for the life of me, figure out a way that would enable me to hang these so the clear would drip off properly. I've been using e-tex, which is great, but a simpler dipping process would have been much easier. Might have to stay with how i'm doing it though.

[@Jekyll424]

Send me pics of your designs to [e-mail] We'll pick it up from there

[@fabiopressao-PE]

Automotive varnish is good and can be used?

[@FleetwoodXX]

I dont have the capability to spray nearly as much as I would like, so I have been hesitant to buy the dip. I tried the KBS aerosol and I have had issues. Do you think your jar method would be good for painting 3 to 5 lures every week or 2?

[@Jekyll424]

I know that as long as it’s stored properly it will go a long way. Having said that I just finished testing the new version of KBS Diamond Clear that is not on the market yet. With regular storage and a 2/3 empty jar, it stayed in its liquid form without hardening for over 30 days! As soon as they announce when it’s released I’ll let you know. In the mean time, try a small can. Try the pint! Let me know if you need a discount coupon

[@zzz7zzz9]

I've had mine for months now, and usually go a couple weeks between dips. It's still fine. I've kept the jar as full as possible, adding marbles to raise the level and reduce the air in the jar.

[@shawnnahernandez3968]

Do you dip once or twice? I read on a forum to dip twice. Do you think a second coat is necessary?

[@Jekyll424]

Definitely 2-3x if it's a swimbait, or for toothy critters

[@reelin_n_amillion5317]

When you dip a rattle trap in kbs how do you hang it? I’m getting a bubble at bottom on belly. Is there a good angle to hang?

[@Jekyll424]

I hang it nose up tail down with wire on both the back and belly eyelets to keep it upright. I keep an eye on the tail drip wire and after 10 minutes or so, I remove it and gently pull off any excess from the bottom

[@reelin_n_amillion5317]

Jekyll424 absolutely perfect thank you! That’s how I just did it so can’t wait to see how it turns out! Thank tou

[@bricekline2904]

Do you put thinner into your KBS when you get a new can? I’ve had some issues with mine it isn’t drying as quickly like my previous KBS

[@Jekyll424]

No I do not

[@bricekline2904]

Okay thank you must of gotten a messed up batch

[@manuelutrilla6844]

Puede informarme alguien donde puedo adquirir este producto en España. Muchas gracias y un saludo.

[@FreshwaterSouL]

So, You don’t spin your lures after dipping them?

[@Jekyll424]

Nope. Hang to dry, self leveling substance

[@riverrooster123]

What temp do u keep the shop to get optium preformace out of your clear coat

[@Jekyll424]

KBS really needs to be between 65°and 80° to perform how it’s designed to, and there’s really good tutorials and recommendations on the KBS website. I’ll link it below

[@ShockSgt]

Are you using 100% KBS in the jar? If not, what are you reducing it with at what ratio?

[@Jekyll424]

100% KBS. Reducing it changes the chemical composition in negative ways. As long as it’s kept the way KBS suggests you keep it, it preserves very well, for a very long time. But! It is a solvent based epoxy, so always wear your respirator and work in a well ventilated area.

[@garciarosa100]

A lot of valuable information there, great job.

[@Jekyll424]

Thanks!!

[@russelldevane5434]

So is this all I need to top coat the lure, bill and all? airbrush it, dip it, done?

[@Jekyll424]

Yes, and then clean the eyelets after it’s dry 8-12 hrs later)

[@NOturtle]

@@Jekyll424 what do you mean when you say you clean the eyelets after it dries?

[@Jekyll424]

It's easier to scrape off excess clearcoat/Epoxy after it's dry

[@ericbrumagin6823]

I noticed that your lure already had a shiny finish to it and you mention it had been painted and coated before you dipped...what do you coat it with prior to dipping?

[@Jekyll424]

Sometimes. I'll make a mental note and go over what I do on which baits in an upcoming vid

[@ericbrumagin6823]

Thanks I appreciate you videos!...i just tried to dip a spoon today and it bubbled...pretty disappointed to say the least..wondering if I should coat it with some other product before dipping?

[@fakiirification]

@@ericbrumagin6823 try a quick pass with a heat gun or small blow torch. usually pops the bubbles and reflows the resin a little.

[@ekie85]

Where can I get this clear coat ?

[@a-strikelures825]

I can't seem to store this stuff correctly.. Very frustrating. Is the mason jar the best way?

[@Jekyll424]

I don't use a mason jar. I like a single piece lid. Glass with a good insulated screw on lid. Spaghetti jars, pickle jars and olive jars work well. Clean them really good first and place plastic wrap between the lid and the glass before you reseal it

[@ringfry6816]

A lot of people tap the bottom of the can with a screw. There is also an anti O2 spay you can put in the container. Good luck!

[@johndickey4785]

Jen where do you get your baits

[@Jekyll424]

Dinger Cedar Run, Shelts and Direct overseas (bulk quantity usually 500+)

[@jayzaroda5196]

How do you dip lipless rattle baits? Thanks,

[@Jekyll424]

Top eyelet on its back and belly eyelet get hangers on them, tail eyelet gets a drip wire

[@alexkenny7554]

i came up with a less frustrating way to hang lipless. I hang it by the line tie eyelet and on the tail eyelet i add a drip wire with a lead weight to "pull it down". works great for me.

[@fabiopressao-PE]

What liquid is this in the glass pot and which ones can they replace? Thanks!

[@Jekyll424]

KBS Diamond Strength Epoxy

[@fabiopressao-PE]

@@Jekyll424 thanks so much bro, congrats for work!👏👏👏👏👏👏👏💯

[@Jekyll424]

I’m a girl 😉

[@fabiopressao-PE]

@@Jekyll424 okay, I'm sorry.😁

[@Jekyll424]

😘

[@dustinsmartfishing]

Do you ever need to dip multiple times and if so how many?

[@Jekyll424]

Usually once is ok. Multi dipping is good for lures that are meant to target toothy fish

[@fishingwithhoffman7365]

I get bubbles like something horrible with this stuff. I only dipped 2 times about 10 lures and they all turn out bad. I get bubbles on the lips. And all over the backs of the baits or all threw it. How do you actually use this stuff and sell lures and it comes out so great? I clean my baits. I never touch the lure after i clean it with alcohol and i dip my lures and get tiny bubbles all threw it

[@Jekyll424]

Sounds like somehow air is thickening your clearcoat

[@jimmyblair2945]

Yes I was watching a video this morning Dec.24 and you mentioned a free catalog I can get to help me with some paint. I took a snap shot of it but cannot remember the name I'm thinking it was Blick but not sure if you don't care could you please let me know what it was thank you so much .P.S . Your videos are awesome

[@AdzyG]

Are you able to dip the lure multiple times to build up layers?

[@Jekyll424]

Yes

[@AdzyG]

@@Jekyll424 thanks so much! I had some really good success with it but it did start to solidify so I was put off, I was worried redipping once cured was the cause but after watching your video I think the air gap between the lid and the product was just too much over time. Keep up the great work! 😁

[@Jekyll424]

Happy Thanksgiving 🦃🍁🙂

[@hubcityallday5319]

Is kbs diamond clear self leveling or can I brush it on without leaving any marks.

[@Jekyll424]

If you’re working with a lure that’s one solid piece, hanging it straight up and down is the easiest. It does level out as long as it has a way to drip off of the bottom eye hook (hang a thin piece of wire from it). If you’re brushing it on a multi jointed lure like a glide or a Rapala Style, repositioning might be necessary

[@hubcityallday5319]

Jekyll424 thank you so much for all the great info you share

[@brennansmith7385]

Is the process the same for jointed baits?

[@Jekyll424]

Only brush on for jointed. Never dip jointed baits and be careful not to get it in the joints when you brush on

[@brennansmith7385]

@@Jekyll424 still kbs?

[@Jekyll424]

Brennan Smith 💯 %

[@fishingwithhoffman7365]

SO YOU DON'T STIR THIS FIRST like the directions say to do?

[@Jekyll424]

No I don’t

[@ejones2219]

Hey! Ive been binge watching your videos. Great stuff! Thanks for all the info. So I have a question... Ive been airbrushing T shirts and all kinds of stuff for about 20 years now and a guy has asked me to paint lures for him. He says it will be 1000 lures at a time and he dont want to pay more than .50 cents a piece. It sounds awfully low price to me. Im not sure how much time and cost I will have tied up painting them. I got excited seeing that you are using createx because that means I already have the paint on hand. What do you think? Thanks again for the videos!

[@Jekyll424]

Even if they provide you with the lures and put on hooks and split rings it's still too low

[@ejones2219]

@@Jekyll424 Thanks for the reply! I feel that its way to low, especially after seeing how much work you put into yours! Hey I just went to your facebook and realized that your only an hour away from my shop! Come by and visit sometime!

[@txmale01]

Hi. Not sure if you are still receiving messages from this post since this was posted in 2017. I just came across your video and had a question regarding the clear coat you're using. How long does it take to dry, where you can handle without leaving finger prints etc. I've called the company I bought this from and couldn't ever get a straight answer as to how long. Thought I would ask you since you, it seems as if you've been using diamond coat for a while and have some experience with it. Thanks for your help.

[@Jekyll424]

Tim Walker I still get messages. I can touch it with gloves after 8 hours, but I consider it touchable and fishable after 36 hours. After that... rock solid and doesn’t yellow. It can be chipped with excessive fishing just like every other lure, but I really like it

[@jamesnash8227]

I just started using kbs, only done maybe 10 squarebills but I’m having issues with it globbing pretty bad on the bottom of most of them. I’m doing it exactly like you are with drip wire and everything but it’s still leaving enough mess that it’s ruining the tail end when I try to clean it up. Some js look bad and some it pulls the paint off. And on some I even get a little ridge of clear on the back of bait js above the tail which I assume is bacause it’s backing up. I don’t have the issue with S cranks only squarebills, you think it’s the angle? Maybe I need to also tend to them with a Qtip as they dry? Or is there something I can do to make it easier?

[@Jekyll424]

This requires an answer that’s more detailed than I can give from a cell phone. I’ll put your question into my next session video, in the Q and A section

[@jamesnash8227]

Jekyll424 10-4, I’m gonna do some tomorrow and check them every half hour or so and clear away excess and see how that does, First time I’ve ever asked anyone for advice, realized I’m getting too old to waste time screwing up when so,some has answer and will share knowledge. I. Js a hobbyist anyway..lol

[@jamesnash8227]

That’s weird, maybe humidity in south Texas or something. It’s working fine so far just cleaning the globbing on bottom eye Eat as it dries but the ridge of air bubbles still js seems to form at random. I can dry 5 of the same baits hang the same way and one maybe 2will get it. It usually happens when the clear has gotten very gummy and I’d be afraid to try to clean it off. I’m very maticulous about air exposure to the point I lay mason jar lid back on bottle between baits even tho it will only be 20 seconds or so til the next one is done. This is my first batch of kbs and I have not adde anything although I’ve heard people say when it starts getting thicker js js add some thinner to it instead of discarding, I purchased a bottle of the thinner made for it from kbs to try when that time comes. The only thing I can think of is that there is a window unit and a ceiling fan blowing in my shop and maybe all the wind is effecting somehow so I’m gonna set up a wire inside a large cupboard and put a dehumidifier in with it, see how that works.

[@urbanbassslayers]

@@jamesnash8227 Look into buying a disco ball spinner, and modify it to spin the baits as they dry. tons of youtube vids on them. It helps keep the epoxy from building up in on place.

[@andymfishing2934]

How many coats do you apply for this type of coating?

[@Jekyll424]

Usually just needs one. Unless it’s a very textured lure or I’m coating it for pike walleye or musky. Additional layers add weight, which affects how the bait swims

[@bengkelpancingajm663]

What kind of coating?like acrilyc glue?

[@Jekyll424]

KBS Diamond Strength Clearcoat

[@bengkelpancingajm663]

@@Jekyll424 the name of product?difficult to get it

[@Jekyll424]

KBS Diamond Strength Clearcoat

[@bengkelpancingajm663]

@@Jekyll424 whre i can buy it?onlineshop?what kind of name and same material...exam for wood.its can work?

[@fiegaerfansyah3175]

Where can I buy the holder ? I don’t know the name of the holder 😩

[@Jekyll424]

Fiega Erfansyah do you mean the jar that holds the liquid KBS?

[@fiegaerfansyah3175]

No. I mean the lure holder ! Like alligator clamp.

[@Jekyll424]

They are called “helping hands”

[@Jekyll424]

amzn.to/2tr9Pzu

[@fiegaerfansyah3175]

Jekyll Productions thank you ! 🙏🙏😃😃

[@bicalijd_pierfishing9652]

Nice bait 👍🏼

[@shawnnahernandez3968]

What gauge wire do you use for your hooks?

[@Jekyll424]

Wire to hang them or what kind of hooks?

[@shawnnahernandez3968]

Jekyll Productions to hang them

[@Jekyll424]

18 gauge picture hanging wire in the hardware section at Walmart.

[@shawnnahernandez3968]

Jekyll Productions awesome! Thank you!

[@pescandopelomundoiscasvalq4249]

🎣🌍 sou do Brasil também faço iscas artificiais só que em madeira . que material é este que voce usa é um verniz ? e é um vermiz para que material? desde já obrigado pela informaçao. boa noite amiga 👍

[@kelwann7296]

E um verniz a base de poliuretano,

[@diywoodenlure]

Where to buy the kbs Epoxy? Provide a web site for me，please.

[@Jekyll424]

www.kbs-coatings.com/DiamondFinish-Clear.html

[@diywoodenlure]

thans.

[@jparryprodeal]

I can't buy this IN Singapore, Nobody carry it and they dont shipped to Singapore

[@tombrockhoff3081]

How do you reseal your clear coat

[@Jekyll424]

KBS Diamond Strength

[@vancochran8704]

If you will spray BLOXYGEN in the jar it will last a lot longer and it will not form a scum on the top. It replaces the oxygen .

[@tombrockhoff3081]

How do you.keep your jar from drying out?

[@Jekyll424]

I fold up a sheet of SaranWrap and place it between the jar top and threads, and the lid, screwing on the lid until it’s very tight

[@geoffmayo2158]

Where can you buy the apoxy

[@Jekyll424]

www.kbs.com

[@jimburnsjr.]

exceptional video... thanks much

[@Jekyll424]

Thanks for watching! 🙂

[@robertoorozco679]

Ok.thanks.here in mexico dont seel.

[@j.m.8185]

Thank you for this video!!

[@Jekyll424]

Your welcome. Thanks for watching 🙂

[@WaterWarriorFishing]

Do you not worry about the safety of dipping inside ? I have a similar situation being indoors but I’ve tried to limit exposure. What are your thoughts ?

[@Jekyll424]

Well ventilated area is the key. If you can set up a fan that vents outside or some sort of air exchange that’s the best scenario.

[@Ho4130x]

Does this have a strong smell like the KBS spray can gives off?

[@Jekyll424]

Most if not all clears and epoxy have odor. The canned KBS smell dissipates within 30-45 minutes

[@Ho4130x]

@@Jekyll424 That's good to know. I've been using the spray can version but going to switch to dipping. Just saw a video from KBS saying they recommend brushing or dipping lures. But, I did learn that this is the best clear coat.

[@96bm]

Name this epoxy ? Top

[@plitz]

This smells so bad.. how harmful are the fumes,and how flammable? I dipped in my basement. I will only dip and hang outside from now on.

[@rickhaenel5517]

Is Sally Hansen close to Kbs in lure sealing ability?

[@Jekyll424]

Different animal entirely BUT! It can be used to clear baits. It will smell to high heaven and your house will smell like the nail salon at Walmart, but it subsided after a bit. Use three coats, let it hang for a week or so before you use the lure. It will yellow and chip over time but it's not horrible and shouldn't be embarrassing if your limited on options or just starting out 🙂

[@tjsoutdoors4786]

Does the kbs have a strong snell to it? Like spray paint?

[@Jekyll424]

+Tj Fisherman it has a smell, yes. So ventilated space is a must. But i don't think the smell is near as bad as other epoxys

[@alanscustomlures9922]

Jekyll424 great video. I use two part epoxy. What's the durability?

[@Jekyll424]

KBS rivals every 2 part out there

[@victormosqueda5740]

What kind of epoxy is that?

[@Jekyll424]

+Victor Mosqueda KBS Coatings. Diamond Strength here's the link. www.kbs-coatings.com/DiamondFinish-Clear.html

[@crab2323]

Great tutorial

[@Jekyll424]

+Scott Crabtree thank you Scott!

[@randytodd2369]

Go KBS work on wooden lures

[@Jekyll424]

Yes!

[@bobpadgett1709]

Nice vid. But KBS is NOT an epoxy, it’s a moisture cured urethane. Different finish with different chemicals altogether.

[@Jekyll424]

Bob Padgett you're absolutely right

[@riverrooster123]

Ty

[@Jekyll424]

www.kbs-coatings.com/ Check out their forum, support and clearcoat pages on their site

[@chrisdodd4095]

How does this diamond epoxy hold up to the hooks marking up the clear. I make my own top water baits and pound then 8 to 10 hrs a day and have issue with hooks scaring clear coat. Thanks for info. Love your videos.