JBL GO 3 COMPLETE TEARDOWN

[@jamestaleporos9794]

Use a plastic pry tool rather than a screwdriver - you're less likely to damage things that way 👌

[@seekerunknown]

And make sure your go 3 is the same version as in the video, in the video just remove two screw to take off the grill, but mine is pretty hard (dt) version is completely different, it needs to remove 6 screw, and the board design also different

[@marcguevara162]

I don’t think he cares about damage, for the purpose of this video

[@stevesurfaro]

Many thanks for a great teardown video! It is rare that you find such a unique design in a miniature speaker at that price, that can be non-destructively disassembled. Thanks especially for pointing out the driver movement and the seals - how it achieves a high SPL for its size. I know you can use multiple GO 3s, but no one seems to document this. Thanks again.

[@harithagotbeat1759]

Just remember one thing the product will be no longer waterproof after you remove it completly ( I'm not mentioning if you remove grill I mean the entire speaker ) Nice video Jin thao ! Love it!

[@rhoieeichstadt8406]

just got my free jbl go 3 camou,, its cute with its size i can say its awesome

[@sashaadamova479]

You are a great professional in this

[@agambhasin]

This sounds better than the Mi 16W speaker which is huge when compared to this one, its a great value for money

[@pee2553]

Sir it’s the battery is better?

[@cheythompson740]

So fun fact for newer released go3 speakers you don't need to remove any screws to take the cover off

[@HBV90]

yes, there's releases that have different built

[@AS-qz5tt]

I just did a teardown of my JBL go 3 and it way way harder. In this vid, once you unscrew those two side screws the outer shell just comes off. but on mine, there are two additional hidden screws holding the outer shell down, which are located underneath the gray plastic resting panel on the back (opposite the JBL logo). The gray panel was held down by a strong, gluey tape, as well as the normal plastic overhangs that pop lock into their sockets, so it was difficult to get off. I had to totally mangle the outer shell to get it open. Not sure why mine was made differently.

[@CoolD10]

theres about 5 or 6 different models of each jbl speaker. they all look the same from the outside but on the inside they are completely different

[@quacomm]

you have no idea how useful this comment is, thanks i ve been trying to find those hidden screws

[@teodornotz4334]

Thx man, u'r the Best👍👍

[@derkchurk5879]

Where can you find a battery replacement, looked everywhere...

[@HBV90]

any 324054 polymer battery will do. Try looking on ebay or aliexpress

[@josephestrera419]

Thanks this video helps me to analyze a jbl go3 if its original

[@antkoos]

Could you please try swapping the jbl go 3 speaker with the jbl flip 3 or 4 speaker?

[@Atlas2137]

Will it be still waterproof when i will remove grill?

[@Samravolgs747]

Nice jbl g3🔋🔊👌🏻👌🏻👌🏻👌🏻

[@Massab9]

Thanks! I had troubles turning up the volume and almost through away the speaker.. now it fixed, with a bit of super glue, it's back to normal! Much oblige:)

[@jsr2101]

It is a very interesting video.

[@Poncio-Pilato]

Speaker watts ?

[@MohamadFaiz2002]

4.3 wat tak silap saya😅

[@Robert_92]

4.2 W

[@christiansmith2005]

2:46 My question is, if its airtight, then why does it sink when in water

[@pineapplej7310]

Anything can be airtight and sink in water. It's net density just needs to overcome it's buoyancy.

[@crispygolden]

Is it possible for you to put it back once disassembled?

[@HBV90]

Yes.

[@crispygolden]

@@HBV90 do I need to use superglue or anything to put it back?

[@darkmoon835]

Is it possible to put the battery of the GO 2 since it has more mAh ???

[@Mortex50]

I was also just thinking a slighty bigger battery could be possible.

[@Piaspeedy]

Nice i have same color

[@juancisneros6543]

Excelente video

[@powerROBY]

is this original? I need to know the code of the integrated amplifier..

[@HBV90]

Yes it's original

[@powerROBY]

@@HBV90 can you tell me the code of the integrated amplifier..

[@shubhradipmandal]

Guitar pick is a great tool to open that

[@HBV90]

Yes definitely!

[@RafaelRodriguesOfic]

Já deixei ó like 👍

[@25834634]

nice example friend

[@detruize]

Bro how. My go 3 grill is nowhere close coming off after screwing off that screws

[@franchoarcia]

For some reason my speaker was not charging at all, the audio was crackling at high volume and it turned himself off after removing the type c charger. Was very odd to me. Tried every tutorial to "reset" the speaker to factory defauls and none of these seemed to work. The issue was that for some reason (quality issues) the battery was not plugged all the way in and it got unplugged after a couple times due to regular use, that means that it was not properly connected when assembling the device. SOLUTION: was opening the device and connecting the battery properly.

[@HBV90]

thanks for sharing!

[@chocolatewhale3656]

Wow they put weights inside to hide the fact that it's mostly lightweight plastic

[@AbsoluteFidelity]

Take out that weight and it becomes way more unstable when standing on its side. I put back mine in.

[@kailumgg6720]

Dude yr the dumb one because why would they use more expensive materials when thay try and make this a small adorable loud bluetooth speaker they use a weight because it is a lot cheaper than using more expensive materials duhhhh

[@Iridiumcosmos]

The weight keeps the speaker planted on a surface for whenever the bass hits. 🤦

[@TVCHLORD]

they shouldve put an extra battery there

[@ashu1jolly]

If you take the grill/cover off only can you put the grill/cover back on

[@propertiesoftechnic]

Oh yes, I was expecting a complete disassembly a lot ... Stoop, is that a weight?

[@NekitGeek]

Go 2 and Clip 3 also have weight

[@guillermoperalmz6796]

It's original?

[@ArtSurvivesArtist]

3:45 How did you do that? On mine there is a white, rubber seal preventing me from prying it open.

[@edwinpepito1498]

Durability test first ✌️😆

[@veryrandomdude9381]

Was your Go3 an ND model?

[@kovacsbsoma9533]

How can you tell which model I have, and what's the difference between?

[@kailumgg6720]

They all sound different and on the box that the speaker came in on one of the bar codes it should say wich modle it is Hope this helps

[@seekerunknown]

Hi, jin thao, what your go 3's version is? Mine is dt version is completely different interior design

[@thStarcorps-qw6dn]

Im wondering if I could turn it into a small hidden storage. In the video it seemed like the top cover would be fairly easy to get off and if i would take out the speaker and all electronics and put it back together, it looks like that’d be a perfect fit: easy to do, unsuspecting and big enough. Anyone got any ideas on improvements or maybe doesn’t agree w my idea?

[@kushking5354]

Get a fishing weight glued in it for weight , might be a bit suss if your speaker really is as light as a feather 😂😂

[@AcasaInNatura]

You cannot start the teardown by removing the fabric cover first?

[@HBV90]

For this version that I have, the grill is screw onto the enclosure, so it's best to take off the sides first to remove the screws.

[@davidalx6951]

Bro one question i have, when I open this jbl go 3 the seal gone or i can use it again ?

[@HBV90]

the seal is rubber so it will still be there.

[@davidalx6951]

@@HBV90 ok, thx

[@jnngaming9317]

What is the size of the speaker driver of jbl go 3?

[@HBV90]

1.7 x 1.9" full-range driver

[@HeadTurnNet]

I find this one actually sounds a bit more balanced than the one up model (I.e. the Clip 4). The Clip 4 has a little bit more bass but overall muddier sound, less crispy on the high end. Also the Clip 4 does not stand up unless you buy an aftermarket shell case, which could cost you another $12. Overall I think the Go 3 is a better choice if I have to choose among the two.

[@LUBATUTORIAIS]

did you buy in brazil? because I saw that it has the name ANATEL, which is an electronic products regulatory agency here, which proves the originality of the product! or was it imported from here to where you live?

[@jonathasantoz]

Qualquer equipamento de telecomunicações que seja vendido no Brasil tem que ter, obrigatoriamente, a aprovação da Anatel. Acontece que esse selo é uma garantia de que o produto possui as qualificações necessárias para ser comercializado. Desta forma, todos os equipamentos da JBL possuem o selo Anatel, mesmo os que são vendidos fora do Brasil.

[@RohanRaj_16]

4 inch or 4cm?

[@Jokid1146]

did you assemble this speaker after teardown or did you throw it to the trash can?

[@ottovesterinen1524]

I think he put it back together

[@Jokid1146]

@@ottovesterinen1524 I hope he did, because it is a bit disrespectful for the product to be destroyed after unboxing it.

[@ottovesterinen1524]

@@HBV90 👍🏻👍🏾

[@Jokid1146]

@@HBV90 good.

[@zayn1237]

@@HBV90 then is it still a water proff? Or not?

[@87697]

Cool

[@GiveMeAnOKUsername]

Presumably the outer casing is not water proof?

[@geoncieharadicanion6396]

Speaker Teardown pls i wanna see the magnets cuz go 1 have neodymium

[@theslowcbr]

Can you please do a jbl partybox 310 teardown?

[@bs96tom]

It may be useful if it get battery drain issue or maybe the press button or USB charge port not work after using for a while, it is still possible to DIY repair it.

[@MrRadwint19]

can you assemble it again?

[@minecraftundelektronik]

Nice video, how much watts has the speaker

[@wanx7167]

Das laud sprecher habt fubf watts

[@zenta_881]

4.2 watts

[@jim_katsak]

4.2

[@wanx7167]

@@zenta_881 what i think 5 lol and i have 20w speaker 👍

[@wanx7167]

@@jim_katsak Lol i think 5 but i have 20w speaker 👍

[@jatinpandit9619]

Please complete teardown jbl xtreme3

[@STYV125]

Ampere battery?

[@pedrovitor1185]

Brasil 🇧🇷 Pele Neymar Favela

[@nightowl-xp7sv]

How much is this?

[@kailumgg6720]

£30

[@JJuliana_2010]

How many inc are the drivers?

[@christiancruz6649]

Teardown the LG PL7 pleaseee no other youtubers do that

[@aldrindavehalabaso2300]

whats the use of the white circle on the speaker

[@kailumgg6720]

The white circle on the speaker is a magnet and inside the speaker there is a coil called a voice coil and then you play music the voice coil will move in and out of the magnet because the coil makes magnetic fields so they makes it move in and out of the magnet that is why a speaker moves

[@Fadeaway1983]

pls do a teardown of tribit stormbox micro

[@carsteynf4974]

Not me watching this with my phone connected to my JBL go 3 👀👀

[@yurxonline1629]

Nice

[@Michal-ps9jx]

You forgot about 4 screws under the grey cover.

[@seekerunknown]

When i first see its driver it's so small than i expected, but big sound than expected 😅

[@phantomfox1557]

The weight will also help the speaker put pressure on what it's resting on so if you place it on something hollow it can increase bass or change the way the sounds emit from the speaker

[@JJuliana_2010]

What inc speaker?

[@JosemaJM07]

Tengo problemas de audio, me ayudas?

[@jesusgu639]

Hola, el altavoz de mi bocina se dañó, con que altavoz puedo remplazarlo?

[@mahmuta23]

I knew that was a passive radiator

[@Aggouratrifths]

What's this little shift doing?

[@UthenSribanyong789]

How its waterprooft

[@UthenSribanyong789]

@@HBV90 Woww Thank you

[@AlexZouhehe]

My new jbl go 3 has serious crackling sounds/noises when anything is played. Any tips on how to solve this?? Pls reply.

[@Yooojayy23]

get a replacement i got mine like that so i get replacement then its okay

[@Piaspeedy]

What is the model? Nd cs?

[@Piaspeedy]

Yes i know i have a go 3 too but my go 3 is a dt model. Its says it under the box

[@ariankaflopz]

He ment serial number basically there is like 2 letters on your serial number gg, tl, cs, ND

[@TristanSpeno]

I saw at the beginning of video, it’s an nd

[@Piaspeedy]

@@TristanSpeno thanks i have a dt model i cant open it

[@muhammaddhanishadiqin5141]

What differences about those models?

[@xfabry1022]

Oof, some youtubers broke that becouse they took off the cover without unscrew.

[@veryrandomdude9381]

I think on some models that screw isnt there.

[@xfabry1022]

@@veryrandomdude9381uh ok, i didn't know that.

[@sumitpurit3885]

Compare with jbl flip3 which one louder

[@jeancharlesc.6290]

unable to do it , i remove top & bottom covert , remove 2 screw at 2"12 i unlock the half front ok , but the half back ( 2.13" , dont want come here :( ) scary to broke it :( what to do ?

[@mrcrowley5597]

how my jbl have some glue at the outer shell

[@anisaera]

What funtion of teardonw

[@guilherme_zuse]

Show how things look inside

[@peterwaster4657]

@@guilherme_zuse Why...?

[@guilherme_zuse]

@@peterwaster4657 probably to be sure that is build exacly how the brand says, also to see components, build quality, and show inside to the ones who wanted to know

[@ruffryders285]

gives me an idea use that motherboard build you own case en use bigger speakers

[@iRichardRD]

amplifier*

[@user-gk5je9wu4u]

i can see the led through my volume up button. I think the blue go 3s have a rubber piece so that doesnt happen. can you see the led through your volume up?

[@user-gk5je9wu4u]

@@HBV90 weird, idk then. when it plays the audio feedback noises it sometimes has a hum to them too. my friends clip 3 also does this.

[@user-gk5je9wu4u]

@@HBV90 one more thing, the area where the driver is on the cover is squishy. like if i press on the cover where the driver is it squishes down. is that normal?

[@user-gk5je9wu4u]

@@HBV90 ok i was making sure, lol. when i power it on if i listen super close you can like hear the speaker moving or something. maybe its just the frequency idk. my friends clip 3 does it, but his xtreme 2 doesnt.

[@user-gk5je9wu4u]

it only does it when turning on, anf bluetooth connection noise

[@Vizarz]

750mah... very sadly

[@patrickuy9521]

Atleast its 5 hours of play time.

[@ottovesterinen1524]

@@HBV90 yeah the clip 3 has 1000mah

[@munimum]

@@HBV90 It looks like more or less the size of the battery with 1100 mAh... Do You think the battery can be replaced with the one which has more mAh?Thats the only downside of this speaker (750 mAh only).

[@kailumgg6720]

Yes in think that is very possible because I have a battery out of a pair of Bluetooth headphones that is 800mah and it is a lot smaller than the battery in the go 3 so yes it is definitely possible you could probably get a 1500mah battery that will fit inside

[@iamlegend3669]

4W???

[@antoniodejesusibarra1732]

It seems to be the replica of the horn because the original is more reinforced.

[@ramonaghinescu7296]

My cover isnt coming off

[@masterone436]

I thought there are 2 speaker

[@JBLZ3]

It's 4.5 watts

[@CAgdas5389]

4.2

[@yepzkieml3720]

4.0

[@loboestepario-cl]

From the box to the trash can, you destroyed the rubber covers lol

[@jblbassboosted2539]

CS?

[@yopa66]

This is not a teardown. It's a destruction video. 😣😖

[@TechLoverforever313]

maybe you should learn the definition of : teardown 😂

[@benvenutinelmiocalalejbl9246]

Ciao ci ho messo ovatta dendro per avere più bassi😊

[@TristanSpeno]

I can’t unscrew the screw to take off the cover

[@kailumgg6720]

You must have the version where you have to take of the big rubber bit of the back and there is screws under that mine is like that to

[@Arnoldboy]

um vídeo gringo com o logo da Anatel kkk

[@rchamy94]

A JBL tem fábrica em Manaus, é subsidiaria da samsung :)

[@kmarao23]

Tbm reparei isso!!! Entao nos exportamos essas caixinhas???

[@sumitpurit3885]

I have jbl go 2

[@lsudan2670]

there is no difference of sound from JBL go 2 or 3 😁 u pay more for JBL go 3 for design and usb tipe C

[@raunakpal1182]

There is difference in speaker Watt.......which greatly affects the sound, its quality, loudness and bass.

[@TheDevourerOfUniverses]

Usb type c also charges faster

[@bassbase3417]

sir can you review and teardown Mifa A10+ or Mifa F10? I will wait for it sir!

[@IzaakMk]

Duro deve ser montar

[@lucasbarbosa2914]

Só uma única pergunta, por que???

[@simar7777777]

você não entende ingles né amigo?

[@lucasbarbosa2914]

@@simar7777777 muito pouco, pq?

[@Kuraio]

Interesting. I just saw another teardown of this exact model ( kzbin.info/www/bejne/iIeWk2yDmbl6Zrc) featuring a completely different circuit board. Either one of them is fake, or they decided to cheap out on its components.

[@HBV90]

JBL have different versions such as GG , TL etc. depending the production center.

[@atelieglauciamachado4920]

R.I.P. watherproof

[@peng_noi]

เป๋งดูแล้ว

[@valentinogaffuri4240]

Escuchando el vídeo en un JBL go 3 negro xd

[@overdok9683]

Мне кажется или удешивили?

[@propertiesoftechnic]

Да нет вроде, акум норм, динамик тоже, дизайн получше, да и материалы как всегда на высоте... Почему ты так подумал? Утежелитель нужен чтобы колонка не прыгала от басов

[@propertiesoftechnic]

Увеличили мощность динамика, поставили блютус нового поколения, добавили разъём тайп си. Да, а аукс убрали...

[@overdok9683]

Я про петлю

[@propertiesoftechnic]

@@overdok9683 всмысле? Её вообще не было, это же го, а не клип...🤣

[@overdok9683]

@@propertiesoftechnic ну она Как то не крепко выглядит

[@Nismo_667]

je l'écoute avec 😂