JCB FASTRAC 3170 PLOUGHING

[@michaelweatherhead9470]

Thanks for the video George and Del 🐕 well done with the plowing ❤❤️. Take care of yourself and family and friends and be Blessed ❤️.

[@gmartin8240]

The Fastrac is looking good and working hard . Lovely sunny conditions George. Great video George 👍 🚜 🔧

[@norman32949]

Well done there George especially on the gloopy parts, it shows the reconditioned transmission is holding up well. 👌

[@Rickwardful]

I love ploughing with my chipped 2155 Fastrac. It ploughs just as well any other tractors I have got and I get off it at the end of a day like a Spring Lamb, rather than knackered.

[@ianhaggart1438]

Evening sir.. nice seeing the fastrac on a plough... still a nice comfortable place to spend the days.. especially if ploughing across the tramlines 😮😊.. stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@rosco4659]

We've just got one of these at work with a Hiab on the back for changing pole mounted transformers, it has a tray on the back as well to carry the new tranny in. I took it out for the first time today and absolutely love the thing! I suppose it's only doing very light duties compared to the farm life.

[@trevorjarvis3021]

Excellent video George, good to see you still doing “traditional ploughing” of the land, very hard going in places there! The old Fastrac was handling it with no problems. Del’s a lovely dog! 👍😊

[@ginggur17]

I always enjoy watching you plough

[@GeorgeSaunders]

Cheers buh, have you been on the plough this year?

[@ginggur17]

@ no pal. Literally stepped off the Varitron 470, 2 days later stepped onto an Airliner at Heathrow bound for Florida. 👍😜

[@charleshart6992]

Excellent video George, very informative!

[@chrislovejoy8249]

Great video again George looks like tough going Fastrac sounds great 🚜😊👍

[@bobpaterson1845]

Good video as usual George 👍 the DP8 i had was variable pitch bodies and could not keep them tight so a date was made for the welder 🙄💪💪😂 has the water level dropped back a bit yet the land you were ploughing looked as if it had dried out a bit 👍 Fastrac was pulling well 💪💪👍

[@davidbaxter600]

Evening George. Great content as always. The Fastrac seemed to be doing a more than decent job on wet ground

[@fredharrowven1040]

Good Evening George, Nice to be back been on holiday in Yorkshire and ended up in hospital had no internet glad to be home, anyway nice to see you hard at it Ground look a bit soft but then you do have the kit to do it, well George you take care of yourself and stay safe.🚜🚜⭐️👍👌

[@GeorgeSaunders]

Glad you're on the mend Fred 👍

[@Darrenws111]

Great video George love it as always that note box is missing one vital important happy thing of the day sandwiches and your flask of tea mate 😂😂😂😂

[@patkelly7999]

Great job Del and George👌👍🙏🙂

[@avafw60]

Hi George. Always love watching you plough esp when you had the TW , we both used identical equipment to get the job done 😊. Im not sure here because ive never ploughed with a fastrac but when i plough in sticky conditions with my dp5 and 8340 ford i find that if i tweak the draft control setting it helps get through the bad patches easier as it identifies resistance from the link arms sensors to the plough. Either way George thank you for another great video😊

[@billupstateny9151]

Not much appetite for mold board plowing in my region. Always appreciate watching the JCB work. Thanks George.🚜🇬🇧🍶🐄👌

[@GeorgeSaunders]

Cheers Bill 👍

[@NeilMaclachlan]

Great video George...a bit tough going at times there...noticed the Fastrac spinning the wheels now and again...nice ploughing though...stay safe and see you soon

[@mrcrazy6278]

That Cummins sounds lovely, I used them in the Case 5150, Erf ridges where quite underpowered with them, but they seemed a good combination in the Terberg YT182 distribution tugsand pull well with a fully loaded trailer. I use to have a 5 furrow dowdwell with the ransoms parts behind a MF 3630.

[@RaysFarming]

Hello George I have been having the same problem as u the ground is so bloody hard she sounds beautiful as ever even with the throaty raw del was giving them people what for lol he does look a nice dog the knob box has its uses cracking video as always look forward to the next video keep up the good work 👍👍

[@kevinwillis9126]

Thanks George cracking vid sir.... Take care...

[@Mr_b_yorkshire_farmer]

Keep up the good work. Look sharp at mending the exhaust. I melted the cab once over on a fazzie t.

[@mickwalker735]

Used to pull a 5f reversible lemken with a county 1174 in the 80s. Low 4, heavy plough.

[@Wornout1]

Ah the good old days 😊

[@DJC995]

Hi George Nice one Thanks again

[@petelamps6055]

I hope all the extra water has buggered off mate. Fastrac earning her keep and pulling well

[@svengranzow3702]

Hallo george Nice Film from ploughing with the fastrac he runs good after her repairing. In your area is it wet here in my area is it dry

[@Tommy-vh7xj]

Enjoyed that video cheers George

[@mrtrusty101]

I love a bit of Fasty action old mate ❤

[@martynp8897]

Can't wait to see the FW 30 on the plough

[@BeefStew1332]

I must say I think the previous generations of fastracs are properly good looking machines, especially on a good green dowdeswell

[@gunton21]

Nice video george, tidy job. 👍

[@offbeatwarble]

Good to see del! Do you still have your ferrets?

[@markrussell147]

Going well best thing ploughing it up as you said will never dry out its the same up here i pull a 4 furrow on my 155 will pull a 5 like yours but i think its too much grief on the a bar axle top bush the fastrac even the older ones are underestimated imo

[@danielcunningham5052]

Someone walked past your back window at 8:05. Del knew

[@sandymcghee3328]

Great video as always George how is on the camera is Liz 👍👍👍

[@joemcgarry6915]

What speed were you going at? Great video I like watching you explain the reasons when you're ploughing.

[@GeorgeSaunders]

About 7 kmh

[@joemcgarry6915]

Just was wondering, I've been ploughing with a John Deere 6195R with a 5 Furrow Kuhn Vari Master 123 plough. The ground is not the best but the 6195 has direct drive gearbox. I use the auto position on the tractor and can easily sit at 8.7 to 9.3 km at 1500 to 1650 rpm. The tractor adjust to the load very well.

[@onelonleyfarmer]

its funny the older we get the more we forget.

[@avit24]

Feckin terrier! My main problem with mine when swapping machines over she has to be on each one as you swap over! Best to know she's with the machine thats being moved tho! Lol

[@MrBusdriver63]

What is the advantage of ploughing when the soil is so wet, George? I am in Australia and I would not plough in those conditions for 2 reasons .1 you are creating a hard pan and the second reason, is it takes a lot longer to breakdown hard soil after you plough .

[@davepayne586]

still waiting to see the big plow

[@casto-]

Nice to the fazzy out ploughing 👍

[@FarmOwlGames22]

Lovely vid

[@ManxAndy]

Typical JRT is Del-boy, selective deafness…..lol. Our lad Fonzi seems to have the same issue, unless treats are offered, or cats need chasing….lol 👍👌🇮🇲🐶

[@MichaelTaylor-m6p]

Think u should do a video of the fw30 ploughing

[@lordofhowell7158]

KZbin farmers are go 🫡😂 Always fancied a go on a fastrac. Very well built like a tractor unit nearly. Brilliant video 💪🏻 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@IstvánJánosGucsi-Vègh]

Szuper 👍☺️🚜😎💪

[@robertstibz9506]

Have you ever tried Min Till ? and can you explain why it has to be ploughed? Ty 🙂

[@Rickwardful]

Coz it’s far too wet to min-till and needs seriously moving to bring up some decent soil to work with

[@avafw60]

​@Rickwardful Unfortunately in those conditions it's almost impossible. As George said, he had to plough it otherwise there was no way of it ever getting a chance to dry out..

[@Rickwardful]

@@avafw60 That’s exactly what in effect, I just said. I’ve had exactly the same problems and situations on this farm.

[@avafw60]

@@Rickwardful Yeah sorry I didn't see you comment before I posted. We have a few field that suffer from very little sunlight which obviously makes the conditions very similar to George's. You have to do what needs to be done no matter how ugly it looks..

[@Rickwardful]

@@avafw60 No worries.

[@marks7502]

ploughing

[@OxxFreddyGlasgow.]

What about a straight through stainless pipe on her George? She would sound the business. Another fantastic video George.

[@stevechantry9963]

hey george, save yourself a lot of money on the exhaust & buy some JB weld .mix up a batch & cover the hole. it will be as strong as steel in 24 hours.

[@shirleydrury5565]

George do you sub soil your tramlines? Cheers buddy for your uploads 😊👍😊👍

[@whathasxgottodowithit3919.]

If you get a DP 1 you can run on top and avoid furrow compaction, and perform a much better job

[@skanti-sp2qz]

Fastracs are for driving down single carriageway lanes a 40mpg including blind bends expecting everyone to get out of the way. Or even better young lads with a trailor full of grain going around roundabouts at stupid speeds then wondering " I dont understand why it turned over"

[@philleeson7835]

Delboy said you were faffing about to much. He said you need to sort it out.🐕

[@alanchatfield4271]

Grab yourself a used Kverneland George

[@Andy-From-England]

😊👍👌

[@luisnunes7933]

Hello!

[@patlan754]

Fastracs grip better than anything else. Just weld up the suspension on your car and see how far you get.

[@MartinClayton-n1b]

Looks like working along The A road wooden fencing Put del in box my jacks here Del ploughman's one dog

[@fiatagriman8427]

in front of the fire

[@marks7502]

DOG!

[@GeorgeSaunders]

Del boy 👌

[@SimonPerry-cz4ke]

Del no one wants to hear you making funny noises when I am busy making funny noises!

[@johnplatt8369]

Great vidio George that old a fast track is sounding pretty average lol.... I would say I'm ploughing the headlands in not out, could see the land is a bit stacked up right upto the hedge.... Are you missing Big Blue the mighty TW she was and still is a mean machine and yep I still give the TW the edge on the fast track......... Cheers great vlog 👍👍👍👍

[@BLMBaconLettuceMatter]

Why do you plow in the mud? Doesn’t that make ground hard and cloudy to work up later.