JEEP CHEROKEE WINDOW REGULATOR REPAIR 1997-2001

Part can be purchased Here: amzn.to/2JIhAsI
How to repair an electric window regulator on a 1997-2001 Jeep Cherokee.

[@mtridgee11]

You... You... You ARE the MAN! Have a two door XJ, and is near impossible to find a replacement. Found this video through a forum. Went down to the Jeep after watching, removed the regulator, and sure enough the exact part is damaged! You saved me at least $300. I owe you a beer Thank you so much for this video!

[@805ROADKING]

That's cool!! I'm glad you found the video Bud!!☺

[@MrPhillerup]

I just want to say thank you. I really appreciate how you took to the time to show how the window works and exactly where and why the window mechanism broke where it did. How to fix it instead of replacing the whole assembly. And finally put it back together. It really is a great video, very thorough and helpful. I now have every confidence that I can tackle my broken window and come out on top with a smile on my face, instead of the scowl that is usually in place after shoving my hands up inside a door to work on a window. 😉

[@805ROADKING]

Thanks Bud!! Good luck!!☺

[@adolfocorrea3569]

Hey, were you able to find the $40 metal piece? can you share where?

[@dmesmith]

805ROADKING where did you find the little metal spring piece ?

[@RamblinAround]

Good thing they make that little part. Must be a common problem I guess. Great how-to vid...nicely done!

[@JoinerNotFound]

Great video but for those curious watching, it isn't the same system in the Jeep Grand Cherokees. They use a steel cable instead of the spring to raise and lower the window.

[@avidem8743]

You are a life saver. I just ordered that for two of windows. You have saved me almost $200.

[@805ROADKING]

That's cool Bud!!☺

[@rhshel]

just to add. you'll find that the speakers foam surround are shot after a long time. You can fix them its easy and it works. You can buy the whole kit for all four speakers for around 30 bucks I did this when I fixed the lock on the drivers door 68 Grand C.

[@johnmohanmusic]

Thank you! My wife was driving home from work this evening and suddenly the passenger window on our 1998 Cherokee just did a guillotine drop and disappeared. I'll be pulling the inner door panel to verify the cause tomorrow but I'm 99% sure what happened is what you described. Thank you for saving me well over one hundred dollars. Much appreciated!!!

[@805ROADKING]

Thanks Bud!! I'm glad you found the video!!☺

[@thematthewmyers]

Thank you! Works great. Note for others, I had to dremel about 3/16" off the tip off of my cable due to a stripped thread on the end. Also, great suggestion to go ahead and take the gear box apart. Found several small pieces of the plastic and went ahead and added a bit of grease for good measure.

[@Dandaman1687]

Thanks so much for the repair video, the problem with mine is that the plastic sheath around the spring has broken off of where the gearbox holds it, I’m trying just duct tape right now and praying it works

[@CraigArndt]

Good thing you took that cover off to get those pieces out. I miss my Cherokee. Had a 2001 Classic, last year made. Traded it in. Went through snow storms here like nothing. My Grand Cherokee I have now isn't as quick as that light little Cherokee. Good job buddy.

[@andrewngwenya8150]

Thank you very much ,that is what us people in the third world are looking for as we can not easily find replacement parts. greatly apriciated.

[@CK9101982]

Finally someone made a video on how to repair this problem!!!!! i have had this happen on my '99 Cherokee passenger side door (repaired), and now have on my Drivers side door.....

[@805ROADKING]

@pimpinpenz Thanks Buddy!! I appreciate you taking valuable time from your well deserved vacation to comment!!☺

[@dragon0085]

I did this on a new 2011 jeep as well, its just a touch different as far as I didn't need to dremel the old piece off, but the broken piece also ends up inside the gear, so check that!

[@Staticharge]

It's always the plastics that'll get you. I've had it cause problems in everything from a little plastic tab in a Saturn electric door lock to the cable guide on a lawnmower handle. One little piece snaps or bends and suddenly a whole component is usually junk. When you showed how it worked I was actually wondering if a person couldn't rig up some kind of thin metal pieces at an angle on the plate to catch onto the spring. Glad you got by with just a replacement bit in this case though.

[@cidney5593]

Thank you for the repair video my friend. I couldn't have done it without it. We are back up and running again. Thanks!!!

[@805ROADKING]

That's cool!! I'm glad you found the video!!☺

[@TexasRedneck]

Thank you for a great video! Mine just did this and Im going wheeling this weekend, and its supposed to rain. I had the door all apart, except for taking out the window regulator and stuff, and needed to keep the glass up, so I put some zip ties around the base of the window bracket to keep it somewhat up. A lil tip for those that might be in the same predicament.

[@805ROADKING]

@mbyr31 Yeah Buddy!! They're really shoehorned in there!! That's why I didn't feel like filming it!! Thanks for the comment!!☺

[@805ROADKING]

I'm glad you found it and it was able to help you!!☺

[@805ROADKING]

Thank you Nick!! I appreciate you checkin' it out and your kind comment!!☺

[@805ROADKING]

@CK9101982 I hope it helps a few people!! It's a very common problem!! Thanks for checkin' it out Bud!!☺

[@805ROADKING]

You're Welcome!! I'm glad it will help you!!☺

[@cartermartinez3804]

Thank you Mr. Road King!

[@rhshel]

thanks! doesn't it piss you off that the damn part wasn't made of something more substantial then it wouldn't have broken in the first place! Also when you go to the deeler they want to sell you the whole damn thing costing so much!

[@danr5704]

Bless You!!!!! I have been trying figure out what exactly tears up without taking mine apart. Just stumbled here. Now it all makes sense, except why make it from plastic to start with?

[@805ROADKING]

@MagicCadillac Thanks Kay!! You're right it's quite simple once you see how it operates!!☺

[@CraigArndt]

@805ROADKING The Cherokee regulator is different than the GC. When I had my 2001 Cherokee Classic, nothing went wrong with that truck. Never replaced anything but brakes, tires and oil. Windows never failed. My GC has been reliable (same 4.0) but window regulators aren't like in my Cherokee. But, 104K its still running great.

[@glamcrue9271]

When I press the switch down I should still be able to hear the window motor working right? I press it down and don't even hear anything so necessarily this part is not the issue.

[@thomaspierce8056]

i love your video unfortunately for me the metal repair kit part you list is no longer available so i guess im screwed because they dont make a repair kit of any kind for 2 doors but THANK YOU FOR YOUR KNOWLEDGE

[@805ROADKING]

Try googling Steiger Performance, they have the kit it's twice the price and they have instructions for installing it in a 2 door!!☺

[@805ROADKING]

@edzgarage Thanks Ed!! I'll have to search that video!! I think Toyota uses those Denso units too!!☺

[@805ROADKING]

I'm glad it helped you out and thanks for subbing Bud!!☺

[@805ROADKING]

@Staticharge I agree, there is just too much plastic shit on everything and nobody sells replacements for it!!☺

[@805ROADKING]

@daddytech There was already plenty of grease in there Buddy!! I did a pretty good job getting all the broken pieces outta there, good thing I took the gear housing off eh!!☺

[@daddytech]

@805ROADKING yeah it is. maybe not having the other things around that you wanted was fate telling you that you really needed to open the housing up. to clean it all out. looks like a good cheap fix and i am alll about that but this time the cheap fix is an Upgrade. ! nicely done sir!

[@805ROADKING]

@carnivore10 Thanks Tom!! Yeah great design, just poor choice of materials!! You and your family have a great holiday too!!☺

[@805ROADKING]

@vidman008 Thanks Buddy!! Actually the spring/screw had a felt type material that was saturated with low temp blue grease along with the gear motor!! It probably wouldn't have hurt to put some lithium in the track, but I heard there's a petroleum shortage because somebody has been changing the oil in there goddamn tractors every week!!☺

[@toddridgwayful]

Thank you!! That replacement part and your video made it a simple fix.

[@805ROADKING]

@ShawnCFarm Thanks Buddy!!☺

[@iloveloosey101]

Thank you so much for this video! I didnt know this was a known issue for these xj's! Now i can fix my brothers window that is being held up by screwdrivers;)

[@CraigArndt]

You know, my 03 Grand Cherokee has gone thru Two window regs, one was my fault. Don't try to open when ice covered! It's a flawed design, like so many other things, but the good outweighs the bad.

[@edzgarage]

Nice job Buddy! This looks a lot like the crappy German design I did a vid on lol

[@coreybutler4929]

Good gauge, but you can buy a whole new regulator for the price of that little metal piece. As long as your motor is still good, which most of the time it is, you can buy regulator without motor and attach your good motor.

[@mattdegabe1014]

Thought this was going to be my problem but it wasent. On two of my windows, I had the little pvc tube dissconnect from the motor housing. This then would spit the cable out of the motor. Just had to glue it back together.

[@rollndice83]

That fix is more than a junkyard regulator but it'll last longer being its built from metal. My 2000 Cherokee driver window works but clicks when it hits full up position so going to tear it apart today

[@805ROADKING]

@IHcubcadet Thanks Bud!! That's actually a simple one, Check out Ed's BMW regulator video, now that's complex!!☺

[@schism420420]

Great video Sir. You can buy the regulator on Amazon for 50 bucks.

[@805ROADKING]

@Gunners762 At least once you fix it you shouldn't have to worry about it again!!☺

[@ShawnCFarm]

Good work

[@gregorypiercesr.2769]

AWESOME video!!!👍👍👍

[@CelticMountainDigs]

Thanks for the video; Just got the part in, so I am going at it this weekend.Also anyone know what turns the motor of when the window is all the way up? mine just clicks when I get to the top.

[@805ROADKING]

@daddytech Thank you Jimbo!!☺

[@Thebatjoeny]

OUTSTANDING THANK YOU SOOOO MUCH!! Where did you get the replacement part?

[@805ROADKING]

@mrwiggles2 It's actually a good simple design, just a poor choice of materials!!☺

[@jennyplummer8047]

I just watched ur video n I just had the part broke on my 2 door jeep n was wondering if u could help me on where I could get the part at please n thank u..great video helps a lot.

[@daddytech]

I personally would have put a little gear grease in the motor compartment incase there is any plastic in there too which i am assuming there is, or did you do that and just not show it ?

[@dougwainwright1457]

Thanks, now I am going to go do it.

[@davidgordon1461]

Where do I get two of the parts for 1997wondow regulator fix the little metal part

[@805ROADKING]

@draywanda Thanks Buddy!! You're th' real Pro!!☺

[@cb466]

Awesome video, thanks ! I too need to know where to get the part please.

[@jimshoe4546]

Great do it yourself video!! I need that part for my 1999 Jeep passenger window. Where can I get a kit like the one you used?

[@gsxr750ia]

Thanks for the video, I found mine broken today, pulled the door panel, was trying to figure out wtf #%$!&*....lol...found your video, now i can make the repair with your knowledge video. Peace man.

[@soulsurvivor5555]

Hi I have a 1998 Jeep Grand Cherokee. On my Jeep, the window is held in place by 2 metal clips that bolt to the regulator. The 2 clips are worn and wil lnot hold the window when going down. What are these pieces called? I bought a new regulator and they did not come with it.

[@derekmrb9441]

wow great Job!!! your video makes it so easy to do can you tell me where i can get that part from..

[@stevmay24ify]

great info, but, please let me know where you obtained the metal part from. thanks in advance.

[@805ROADKING]

@krazy45cat Thanks Buddy!! Lol!! Spare parts!!☺

[@22DVR]

Can someone tell me where to get this merely part to replace plastic part. And thanks for the great demo video.

[@somecrazymex]

Thanks brother ... this was very helpful !

[@805ROADKING]

That's cool!! I'm glad ya found the video!!☺

[@Jeff-sc1df]

That is great! Then I realized mine is a '97 grand cherokee. Oh well.

[@pimpinpenz]

Great video buddy! it could really help out some people!

[@805ROADKING]

That's cool, it should do the trick!!☺

[@805ROADKING]

Thanks Craig!! Yeah Buddy!! They would have screwed up the works!!☺

[@brandonfranke7046]

In my 2000 cherokee sport I had a brass stopper in the small groove of the track. The stopper was accompanied by a small piece of soft material that seemed to help "softly" stop the window when it hit the bottom of the track. Has anyone found this? I'd prefer to keep that piece so the motor isn't stopped abruptly. Anyone know how to set the new metal piece to accomodate this?

[@RJF916331]

Thanks for the Video ... I believe this is my problem ... Where do I get the 40 metal piece?

[@805ROADKING]

@RamblinAround Thanks Buddy!! Yeah it's not if it's gonna break it's when!! Great design, piss poor choice of materials!!☺

[@ObsoleteTechnologies]

Thank you! this is exactly my problem. Awesome vid! also, are you from New Jersey? -just wondering cuz of the accent.

[@miketurner3799]

Very informative - exactly what is happening. Where can I purchase the part?

[@PaladinHero]

I like how this is categorized under pets and animals. ;)

[@tedhaze1]

thats a good video on that

[@tatankarojo4476]

Thanks a lot, it just happend this to me yesterday on the passanger side door and i do not want to spend 200 bucks in the whole assambly, i realy apreciated this video, If someone can tell me where to buy the little piece. Thanks a lot

[@gregorypiercesr.2769]

Do u have a link to the part u used in the video? Thanks again.

[@straykatt68]

Thanks for the how to vid Roadking...I just had this happen to my Cherokee today...could you please pm to me where I can get this replacement part? I sure would appreciate it...thanks.

[@alexandermoore2509]

@805ROADKING could you send me the info for the replacement metal piece.... my 1997 Cherokee broke about two months ago and i haven't been able to find the part otherwise. thanks in advanced!

[@22DVR]

Thanks been a big help.

[@mrbobsshow]

@jollyg619 Thanks for the tip hopefully they still have them going to Ebay now!!

[@Dcvillnz]

One awesome video ! thank you very much . Where did you order that screw part from and should I grease any of these parts . Thanks brother🙏 Stay safe

[@805ROADKING]

Try the link in the description!!

[@fireball7876]

where do you find the little piece that you replaced the old one with, the one that costed $40, thanks get beck to me soon, thanks

[@BerettaVandy]

could I get the info on the new metal piece? Both front windows have broke on my 97 Cherokee.

[@301steady]

Thanks for sharing. FYI, my 98 Jeep doesn't have this type of Window Regulator, although, a cheap plastic roller is why mine isn't working. Wondering if a metal roller is out there, that can bolted or clipped on instead of riveted plastic. Also, for this video, could it be possible that it's for 99-01 Jeeps?

[@geraldmolitor2650]

just my problem, now solved so where can I get the part?

[@griffinhammond9747]

Where can I get that piece mine just went out and I watched this video before I went and bought the whole regulator at AutoZone

[@mrbobsshow]

Thank you so much for the video have to do this on my daughters 01 where did you find the piece that breaks that you drilled out and replaced????

[@mwinowyll852]

would greasing the screw/chain be a good idea?

[@805ROADKING]

@kookiemoose Planned obsolescence...Grasshopper!!☺

[@luvagoodcigar]

Thanks for the Video. Where did you get the part for the regulator?

[@dwarttisproctor]

I have 2000 jeep grand cherokee. i fixed the ground wire in the door. My locks are now working but my windows, radio controls on my steering wheel, the temperature indicator on the over head computer isnt reading, and the interior lights stillare staying on. i am told by many that there is some regulator but cant locate anything. can anyone please help with this issue

[@jarena20]

Where do I get this part for window regulator. I have 3 windows on one onf my jeeps and 1 window on my other jeep that have this problem. It would be gresat with the nice weather coming to be able to open the windows!

[@krazy45cat]

Great Video , where did that ball bearing come from ?

[@gregorypiercesr.2769]

great video dude!

[@805ROADKING]

Thanks Bud!!☺

[@Johnz414]

Ok, great video but everyone wants to know where to get that little part, me too! So, are you letting people know where to get this little part?

[@Johnz414]

805ROADKING Thanks a bunch!

[@MultiOtis]

thank you for the video, very helpful. where can i find the piece? thanks in advance.