Jeep Grand Cherokee Wk2 Rear Muffler Delete (3.6 Pentastar V6).

[@dustinfinch5012]

Could you do a video with acceleration to hear what it sounds like but just at an idle

[@LTUSATV]

Sorry I can not, it's been changed already.

[@keithfreeman4015]

@@LTUSATVwhy you change it?

[@LTUSATV]

@@keithfreeman4015 Cause I lifted it and did a lower bumper delete for more offroad clearance.

[@b.williams7951]

Where did you get that pipe to replace where you took the resonator out, I can’t find anything

[@LTUSATV]

Lou's Exhaust made it.

[@b.williams7951]

@@LTUSATV ahh. Thanks for the help anyway

[@Hitman1078]

​@b.williams7951 check out blastin bobs. They sell a bolt on resonator delete.

[@benpolishchuk209]

Does it drone when rpm are not very high, or when cruising at freeway/highway speeds?

[@LTUSATV]

Not that I could hear.

[@benpolishchuk209]

@@LTUSATV thanks for replying, I just cut the resonator after consulting with a tech and he explained that its really there just to change the tone while simultaneously also get that last bit of noise reduced aswell. It’s a good sound but I only cut for one reason and that’s so I don’t keep smacking it on descending hills while off-roading. (My lower Bumper fascia is trimmed up as well exposing the resonator so it had to go)

[@LTUSATV]

@@benpolishchuk209 Mines now cut right where the pipe meets the rear resonator originally. You may want to put some sort of extension but keeping it high clearance or delete the rear vents behind the bumper (both sides) so you don't get exhaust fumes into your vehicle.

[@benpolishchuk209]

@@LTUSATV wow good call! I never considered that a possibility. That’s where I made my cut aswell but I made the cut at like a 60 degree angle so that, in theory, the fumes would dump downward as the tech recommended. It should help with reducing fumes getting in through vents. I will still look into deleting the vents.

[@benpolishchuk209]

@@LTUSATV to delete the vents, how would you go about doing that? The only thing I can think of is welding a plate over vent holes.

[@peterboyd7452]

Its not muffler its a resonator

[@LTUSATV]

Call it whatever you want. :)

[@michaelnoice2215]

Which exhaust tip did they use?

[@LTUSATV]

Honestly don't know the brand name, was purchased and installed at Lou's Exhaust in Brockton MA.

[@mikekowalew3810]

Does it affect the guarantee in any way?

[@LTUSATV]

What guarantee? (it's a 2013)

[@giovannierato3751]

I wanna see that weld tho

[@LTUSATV]

0:42

[@RayTuttle-of5qd]

Stop doing this the sound of a v6 is worse than a wino puking in a galvanized steel garbage can while simultaneously crapping his pants