Finally got my hands on a CRD Liberty...this is in the mear future 🤙🏽
@100nxlogan3 жыл бұрын
Great video, thank you for the time you put into this. I found it extremely helpful.
@225casey12 жыл бұрын
Long shot, but did you have to reprogram you system for the jeep to run right, or do just have a check engine light on for it?
@RolandCaston2 жыл бұрын
Runs fine without a reprogram
@samair77 Жыл бұрын
hey man nice video. I was thinking just to block the egr tube without removing anything. will it work? probs and cons? thanks.
@RolandCaston Жыл бұрын
That will work too and since you will still have the electrical components you probably won't get a check engine light
@samair77 Жыл бұрын
@@RolandCaston thanks for the reply man but since it's so easy why people don't just block it and they remove and bypass the whole thing ? Any ideas
@towingimg92653 жыл бұрын
This video is 2 years old so it's a long shot. Do you still have the cylinder head of that old engine?
@RolandCaston3 жыл бұрын
Yes
@towingimg92653 жыл бұрын
Great! I'm not sure what it's gonna take yet to ship it, but what do you want for it? You can call me to make it short. 8138634127
@RolandCaston3 жыл бұрын
@@towingimg9265 I have yet to remove the head to see if its any good.
@towingimg92653 жыл бұрын
@@RolandCaston ok Let me know asap. If anything I'll just get a few parts out of it.
@Switzinator3 жыл бұрын
Hey! Do you still have that old engine, and if so, are the pistons any good?
@RolandCaston3 жыл бұрын
I do have it but don't know about the pistons. I've never had the head off.
@DomVito8711 ай бұрын
Curious where to get the tune for that...
@RolandCaston11 ай бұрын
Cannot help you
@kendallpulsifer91492 жыл бұрын
what if anything do you have left of the engine? I will take all of it if decent price
@RolandCaston2 жыл бұрын
Where are you located?
@juanwoll28722 жыл бұрын
Hi Roland Gaston, nice video I need spares:the power steering pump bracket and the cooling fan support. Could you help me if you sell me them by ebay or the way you prefer. Waiting for your respond. Juan Woll.
@RolandCaston2 жыл бұрын
I'm sorry. I don't have those
@juanwoll28722 жыл бұрын
HI Roland Gaston, if in the futuro you get other CRD let me know, in my country Perú there is not junkyard or places where to pull up spares that no longer manufactured. Many thanks for your attention.
@DabAbster-g5u9 ай бұрын
I am dizzy after watching that video😮
@RolandCaston9 ай бұрын
Thank you for your comment and for watching. Cha-ching
@glennschlorf12852 жыл бұрын
Im just really trying to understand this engine... mine has a terrible engine issue.... has annengine performance issue as if the thing is injecting fuel in multiple cylinders at the same time. It knocks it belches sooty black smoke no power... Ive thrown glow plugs, injectors, ecm,fuel filter head, and Im about to throw a cmps and a Ckps at it... I want to get it running proper before I do an egr Delete on it... the vehicle was purchased new may 2005 all service was dealer perfomed. The vehicle has exactly 112000 miles on it... if the cam and crank sensors do not straighten this engine out my look at the lifter/rocker assy next. It was running fine till it got an intermittent run like crap knocking thing going on.... this came and went 3 times prior to the day it stayed.... momentarily did it for a few seconds to a minute then ran fine.... the only other strange anomoly that occurred was 4 months prior I had a temp sense indicate hot engine for about 10 minutes with no hot engine occurring at all... Im am not sure what to say about this and my dealer is useless on information
@RolandCaston2 жыл бұрын
Join the Facebook groups. This one has some knowledgeable folks. Jim Hulse in particular travels and works on them. facebook.com/groups/libertydiesels/?ref=share
@RolandCaston2 жыл бұрын
I "think" this. Carbon deposits inside the intake runner blocking air flow and worn rocker arms aka followers. But yes. The dealership has probably long ago dismissed this engine.
@glennschlorf12852 жыл бұрын
@@RolandCaston they just cant seem to diagnose anything... Im changing the cam position sensor then next was gonna go with the cam lifters rocker assy. Cant believe though thar the intermittent knocking and sooty misfiring like off time would be cuased by worn rocker lifter assy ID parts has the Rocker lifter assy and gaskets and bolt sets for it... thought about getting a crate duramax 2.8L and dropping it in
@glennschlorf12852 жыл бұрын
@@RolandCaston the more and more I think about it the more I think a hydraulic lifter on the Rocker arms failed... becuase of the off and on issue leading up to it. One leaks oil pressure they all collapse... that would cuase all the valves to close and open in very short duration cuasing low power and extremely rich fuel to air mixture let alone improper amount of air taken in and exhaust expelled... that would make it knock and blow soot