Jeep Wrangler Big Brake Install - Is It Worth It?

Have you installed larger tires on your Jeep? How about bumpers, fenders and a roof rack? The more weight you add to your Jeep Wrangler the hard the stock brakes have to work. In this video I install a Teraflex front and rear big brake kit on my 2015 Jeep Wrangler JKU and then take them out for a test drive and give you my impressions. #jeepmods #bigbrake #diy
Front Brake Kit: amzn.to/2Nrxc1u
Rear Brake Kit: amzn.to/2tYk7V2
Brake Bleeder System: amzn.to/2lV5IVr
🌐 TRAILRECON.COM 🌐
trailrecon.com
Check out our website if you’re looking for off-road or overland gear and equipment for your next rig and your next off-the-grid adventure. We have everything you need, including recovery gear, tents, cooking and kitchen gear, sleeping bags, TrailRecon clothes and stickers, and a lot more.
If you’re interested in reading in-depth articles about the places we go, products we use, and our personal insights about overlanding, you’ll want to check out our blog.
trailrecon.com/blog.asp
********************
📲 SOCIAL MEDIA LINKS 📲
Facebook: trailrecon
Instagram: trailrecon
Disclaimer:
TrailRecon assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Due to factors beyond the control of TrailRecon, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrailRecon. This video is solely for entertainment purposes only.

[@jjhill72]

It always amazes me how clean the underneath of California Jeeps are, makes me so jealous.

[@whitieford_rc948]

One of the only things that are good about cali

[@CreeperCustomPaintball]

Mines clean, I just have to grind rust and paint it every summer

[@mikehoffman3690]

You always provide your true opinion/impression on your mods. Very helpful. Thank you.

[@3.2.1.adventure4]

I did the dynatrac big brake upgrade the same day, and I had spongy pedal at first as well but now after 150 miles I'm sold. Stoked the teraflex make you feel the same! Awesome content keep it up!!

[@rexcarroll6019]

Another great video. I'm running the same Teraflex Big Brake kit on my JKU. Huge improvement over the stock brakes. You'll really appreciate them out on the trail when you're on a steep rock face and the guy in front of you gets stuck. You'll be able to hold your position without a problem. I noticed that you installed the reservoir part of the front shock away from the spring. When I did that on my Jeep, the tire would just catch the reservoir under full deflection/turn. It was just enough to chew up the Fox decal. To solve the problem, I rotated the reservoir so that it sits about half an inch from the springs. Never had an issue since. Depending on the backspacing of your new wheels, it may not be a problem, but it's something to check out.

[@RockyXTV]

I installed the same kit front & rear on Project Dirty Willy a long time ago and they stop great. I went with the slotted kit, but I had to fight some squeaking issues for a while. This kit has amazing stopping power on a 2dr! The TeraFlex pads were a little aggressive for a lighter 2dr so I went with some NAPA Premium or Platinum something or others and it doesn't put your face in the windshield anymore. Great upgrade for anyone with larger tires and/or heavy equipment.

[@thigpenadam91]

Iv'e been waiting for someone to cover this topic. Awesome video as usual Brad!

[@MrJoecango]

Good video Brad, been looking at this upgrade for my rig too. Thanks Brother!

[@hoslogistics]

Definitely impressive looking! Putting these on my list. I'm running 37's also, and have noticed a need to upgrade.

[@phantumdrummer]

I remember commenting about this when you put the 37's on. I'm glad you finally were able to make the upgrade. It might not seem like a bunch of a difference, but when that granny pulls out in front of you... you will be glad you now have the upgraded brakes. One thing I do need to add is with the rear brakes. Those little clips the pads ride in probably should have been replaced while you had them off. I've had numerous and by that I do mean A LOT of them break and get lost while driving. So meny that I just have a stock of them in the shop to install as needed. Thankfully they are easily purchased at your local parts store. So, if you hear an odd "click" when just starting to press the brake pedal, (most noticeable pulling into the garage with your windows down) take a look for the clips. As you may have one or more missing.

[@matthewmcgraw4991]

These kits are awesome! I did the front and rear Teraflex kits in Nov '17, but also added the Mopar big brake master cylinder and brake booster upgrade. In the end, overall performance felt better than stock even with 35s. For anyone looking into doing the Teraflex upgrade, I'd spring for the larger master cylinder and brake booster so you don't loose firmness. Brad mentioned not needing to upgrade if your Jeep is newer than 2011, but mine is a '13 and the booster and master cylinder in the upgrade kit was definitely bigger. Don't run anything smaller than a 17" with a minimum of 4.5" backspacing.

[@shogunofgrowing4839]

Thank you for bringing up the master cylinder and booster upgrade to my attention I'm going to look into it.

[@mariodesmo]

I installed the Terflex rear disc brake kit on my '02 TJ many years ago. My TJ is a Sport model so no rear discs from the factory like the Rubi's had. With 35's my stopping power was scary to say the least with the factory rear drums. With the Teraflex rear discs it made a significant improvement in stopping. It was a very good upgrade. I've thought about a big brake kit for the front but am not aware of a simple-to-install kit. There is/was a kit that required exchanging the outer knuckles, and machining, and lots of work. I would also have to upgrade my wheels from the present 15's to 17's for caliper clearance, and that brings up a whole lot of wheel/tire issues. But on the somewhat good side, my brakes are now just concerning, ...not scary anymore. lol

[@frankc1174]

I just did the JT rear brake upgrade on my jk And love it!!!

[@nachovalenti]

Very good and useful video. Thanks for sharing Brad.

[@RubiconUnlimited]

Impressed how quickly you are checking things off the list! Another great upgrade. Ps. Great dog!

[@5thGenNativeTexan]

Anxious to hear your longer term thoughts. Even with just 35s, with the large front and rear bumpers, winch, cargo, etc.. I feel like I have to plan a day ahead when I want to stop.. lol. After watching the Teraflex video, I'm pretty sure I'll have to pony up for the larger capacity booster on my 2011. Great video!

[@RocklanderUSA]

Totally worth the money, great job Brad!

[@anthonyhitchings1051]

My recent brake job used rotors with the same finish and ceramic pads - its smooth a silk tostop

[@zacharybrown6111]

Fantastic video. Very helpful. Thanks

[@comingtofull-ageinchrist6736]

thanks for the video! lots of great feedback in the comments! Thanks, Brad!

[@omar-wf8zl]

I dont even have a jeep but still like and watch every video!

[@Garth2011]

Great idea. Big tires always alter the original design/engineering of suspension, steering, gearing and braking. The larger the tires, the less the stock brakes will perform. Same with axle gears, large tires, less performance with the same gear ratios. It's fairly interesting how many folks do not understand the dynamics created with larger tires and suspension/steering components. When you do the math, the differences are huge. Regarding the testing part, brakes will require a good number of miles to seat or break-in before you realize their full potential. The lining and disks have to seat/mesh/wear before they obtain full potential which is about when you notice the disks having their shiny appearance. It's a good idea to brake easy for the first few miles until they are seated in fully. Looks like a great kit...all went smooth.

[@classicrocker81]

Any big brake kit is always worth it! I put Tundra brakes on my Tacoma last November and it has been worth it 100% especially running bigger heavier tires.

[@classicrocker81]

Jordan Cousland its a 2000

[@classicrocker81]

Im sure theres a way. I know on second gens you can use GX460 rotors and the 13WL calipers. Just have to shave the calipers a little to get them to clear.

[@mattb.2359]

If you want a chance of getting that rotor off in the future to change it, put anti sneeze on the inner ring where is go onto the drive axle dust cover. Other wise is is hammer time trying to bust it off.

[@nukcurv51]

I did mine about a month ago. My rear pads were about 1/2 gone so i put new ceramic pads on. I also put a nee rear spring kit on (that retain the pads in the caliper) for like $7. Wow what a difference with the 37 toyos im running

[@RVHabit]

Nice job I have a big brake kit on my wishlist of things to do.

[@bigospig]

This is a safety issue that is so often overlooked by people who go to bigger tires. Thanks for addressing this. :)

[@MichaelCook1981]

Yep, just saw a post were some one was asking about 15" rims. The smallest rim size for the big brake kit is 17".

[@chrismartin4335]

Seriously man, great job, appreciate the videos. ;)

[@donmontalvo1]

When my buddies swapped out my Dana 30/35 (M186/M200) for Dana 44 (M210/M220), I couldn't understand why they insisted I buy the Mopar Big Brakes upgrade kit. I just moved from 285s to 35s, and now it all makes sense. Bigger wheels need bigger brakes. This is a great video, thank you!

[@310to703]

Nice vid very cool and simple install

[@bosse641]

Well done. Great video. Thanks.

[@thesarge8488]

Great video, very informative

[@phillyb4588]

Love those waiting for Black Friday

[@ajlafferty9694]

Great Video Brad!

[@taxi615]

I like the way you make the install video's always very detailed. Only thing I would do extra is add grey grease to the back of the rotors to keep the from seising up.

[@developmentdivision122]

Brakes are so important. Besides tires, brakes and suspension are the most vital upgrades no matter what type of vehicle you're building! anyways: I usually put on a little anti-seize on the hub surface before putting on rotors, just so next time they don't stick! I also use some " disc brake quiet" on the back of the pads, Idk if it really works or not, but so far i've never had a squeeky brake issue. Also I like to use a paper towel + brake cleaner to clean the rotors, gives me peace of mind that the oils and dirt is coming off and onto the paper towel.

[@xXThePointXx]

Switched to the Hawk Performance SuperDuty Brake Pads for a 2010 Dodge Ram 1500 in my TeraFlex Big Brakes. Break-in procedure is pretty important and I let mine cool over night after. I don't like to skimp on safety items and have spent many times more on brakes and pads for track vehicles.

[@snowismas]

There is a larger Mopar MC and booster you can install. It is noticeably bigger and makes a difference. I installed it on my 2016.

[@jorgemadrigal8780]

Great video! Give your brakes some time to settle in, usually between 150 to 250 miles, and I can almost bet you that they'll get better . Good luck!

[@tonynevarez3836]

Great video! I am thinking of upgrading but using JL parts. Well see what happenes 😊

[@azmsp84]

Brad did an excellent job outlining how easy any brake job can be. Loved that you actually used a torqued wrench! One thing that I may add, this job is a large undertaking by just taking the wheels off. I would suggest replacing those rear pads while you're at it. It's always best practice to have new surfaces on both the pads and rotors. Additionally, I would've cleaned the old grease off of those slides and cleaned the re-used hardware thoroughly. A clean and freshly lubricated brake system will eliminate any doubts in the future if you develop sticking or squeaks.

[@TrailRecon]

All great advice! I did replace my rear brake pads about 5000 miles ago, so that's why I did not replace them during the install.

[@willmix5044]

Brake pads seat to the rotors, that is why you were doing the break in on the front...seat the pad face to the rotor. Those 5000 mile pads were seated to the old rotors, and should not have been reused.

[@Danny_Ruth]

I’ve never used a torque wrench before but I’ve noticed several installs require one. Any recommendations?

[@azmsp84]

Danny Ruth it’s always best to use a torque wrench if you can. It’ll give you the piece of mind knowing it’s right. If you have years of experience knowing what 50ft lbs feels like, it may be no issue. I think where it can make a big difference is with things like lock nuts where it can be hard to judge. Everyone knows that most of the vehicles out there have been built without torque wrenches so take do what you want with my advice haha

[@mikehatley736]

CONGRATS on hitting 80K. Keep the videos coming.

[@TrailRecon]

Thank you! Pretty crazy!

[@AndrewTurner251]

Great video.

[@murphtahoe1]

Those brakes look pretty cool Brad. I just went to 37’s on my TJ with Dana 44’s. This looks like some OT money may have to be stashed away for my new purchase. Nice job on the video!

[@theracingjeep]

Kevin Murphy don't bother with teraflex. Your money is better spent on Wilwoods. For $200 more you get a lighter dimpled rotor, SS brakelines and an actual 4 piston brake caliper. That's also lighter.

[@jcs5202]

Great vid! I did the very same kit and the brake pedal was still a bit too soft. I understand the best solution is to upgrade the M/C to the bigger 1.18" bore. This comes as part of the J8-Mopar BBK. You've come this far, another $250 seems worth it. It'll def get the firm pedal we all want. Bigger bore lets more fluid through under pressure.

[@romelosugarhill3753]

Can this big brake kit fit on 17” rims. I drive a jku 2012

[@dinobm13]

Just got my 16 rubicon hard rock what a beast compared to my 04 LJ. will be looking into brakes after winch. Learned that lesson on my motor home cracked the rotors clear thru. Only have to show me once!

[@TrailRecon]

Congrats on the new Jeep.... man I love the LJ's!

[@CaptainGnarkill]

Cant wait to see Rob's Venture the Wild Jeep in the next video... patiently waiting.

[@TrailRecon]

Rob is such a great guy... I think you guys will enjoy the video!

[@dagamore]

adding a hose from the caliper bleed valve to the bottom of the bleed bottle(under some new/old brake fluid) will make bleeding a 1 person job, because you can just leave it open and it wont suck back in air just brake fluid.

[@tommy35ss]

Anytime you get air in the brake system, it is best to bleed the system fully. On an 02 Camaro we have I only bled the rear brakes once without bleeding the fronts. Long story short, I wound up ruining the master cylinder, and had to replace it later on when I started losing brake pressure. Not sure if it was to that specific brake system, but just something I will never do again.

[@mikehatcher5369]

Since I have 35's on my JK, this will be my 1st upgrade.

[@Jon_Ringo]

Great video Brad. I wish they made these for the FJ Cruiser. I think you will notice the rear ones more when you are on the trails and coming down obstacles.

[@TrailRecon]

I absolutely noticed them this weekend coming down the mountain at Big Bear... huge improvement!

[@f.adamrios786]

Brake spring retainers = antirattle clips. Nice gloves! 😂 Your videos are awesome though. Thank you.

[@christophermichaelson9050]

Nice work.

[@ChristopherMirabile]

Brad: I know this is a year old video, but two questions about the brakes: (1) any update on how these are working out now that you've had them on for a while, done some trips, done some trails, done some commuting? Still a worthwhile upgrade? Any reliability issues, squeaking etc? (2) on the question of that soft pedal: did you ever consider having someone with the right vacuum tool do a proper professional bleed of the brakes? It doesn't take much air in the system to make the pedal feel mushy, and you had those brake lines open for a moment when you were moving the lines between calipers. PS: enjoyed the podcast you did recently on the Sponsored Rider podcast.

[@joeolmsted8867]

I see that on the front brakes you installed the brake line so that the bend in the line is towards the inside of the suspension. I did that as well - which almost burst the line during some hard steering.

[@tilleo]

Pet the dog you monster! Besides that great video and explanation of what to do and expect.

[@onawhim7737]

Again with another great video, filled with useful information. Couldn't believe how clean everything was. Did you degrease the whole underside before you started? How long did it take you, start to finish? I don't know about others but I would find it helpful to know if this was your choice and why or a sponsored product install. A quick check of the links you provided and this little upgrade is just over a grand. If you have an earlier JK and want to upgrade the master cylinder tack on another 300 bucks. I'm new to all of this and just trying to learn as much as I can. Don't mean to be rude or anything like that. Perhaps they are just dumb questions and worse observations. My apologies if I have offended anyone.

[@snowismas]

If you got any air in your ABS module then you need to take it to a shop that can put it on computer and make it actuate the module to also bleed it. That will firm up your pedal as well as the Mopar booster and MC, it is bigger that the ones that are in even the newer JKs.

[@adamq3397]

Do you have any "how-to's" on relocating break lines? Looked thru your channel and didn't see any. Love your videos btw thanks

[@DAVIDGREGORYKERR]

I hope that you didn't forget the bolts that lock the brake disc to your hubs as you don't want your brake discs from breaking loose when you need them most.

[@sm6wet]

Great video as Always Brad! Is there a video for used Wranglers for sale in the states? Like one for modded Wranglers? Cheers from Sweden

[@DidierBan]

So this pretty much is all the parts from a JL installed in a JK .👍 I’m gonna see if I can trick the system at autozone 😁😁😁😁

[@dbrandon4528]

Better brakes are always a great idea

[@Matt02341]

The only thing cleaner than your installation is your presentation. Nice Video.

[@jamesblevins1558]

Agood and informative video appreciate the time you take to put together something that helps everyone out. By the way I seen in a earlier video that you have a MCPO sticker on your back window are you active or retired? Myself I'm a Retired MCPO (2009), recently purchased a 14 Rubi about a year ago. Haven't done any upgrades yet just doing a lot of research will start at the end of the month your videos have helped a lot again thanks.

[@TrailRecon]

Thank you! And yes, retired HMCM almost 2 years now.

[@Lenny7118]

Great install and looks easy. Why didn’t you put new calipers and brake pads on the rear like the front ?

[@joshuakazfields4374]

good stuff looks like they could have made the tolerance with the lugs better

[@markkoller479]

Thanks for the review. Just curious have you ever had a rock get lodged in the rotor holes?

[@aytonbob]

Depends on the colour you paint them.

[@GluttonyIsMySin]

I got this done about a month ago on my jku sport... I think this is something people neglect which is possibly the most important upgrade. I got the slotted ones and now I feel safe letting my kid drive my Jeep.

[@christophermichaelson9050]

Tomasz Tyka have you researched slotted rotors off road? E.g. mud and such.

[@GluttonyIsMySin]

Christopher Michaelson as long as you keep them clean everything should be fine. I know crap will get all up in there but I chose the slotted for the highway/expressway travel I do everyday. I normally have fun on little dirt roads and paths.. For now. I have plans to upgrade my axles and such in the coming years but for now I'm what you would call a "mall crawler". But I like the term "Chicago Crawler" because of all the damn road work and pot holes that never seem to get done/fixed.

[@xXThePointXx]

There's a drilled and slotted Wrangler KZbin review of a guy who used them. I don't even use drilled and slotted on my race vehicles anymore. Brake pad tech has come a long way since those rotors were needed. Actually get better pad to rotor contact patch without them.

[@onawhim7737]

Lol! Love that, "Chicago Crawler" I'm from Chicago originally and migrated to AZ 5 yrs ago. 2 seasons in Chicago. Winter and road repair! I used to go to Wisconsin via I90. It took them 5 yrs to put in a bridge, 5yrs! I am sooooo glad I moved to AZ... Well except for the 3 or 4 months of 110 plus temps, but it is a dry heat!

[@GluttonyIsMySin]

onawhim7737 lmao... You're right... It takes forever to get work done here. But that heat is insane...

[@kimpham7592]

My brakes are still soft 😬 I am going to try your process of driving and not stoping

[@mikefaass9204]

Awesome install video. So i have a 2012 JKU , Been seriously looking at the big brake kits especially with the dual pistons but i heard you would have to upgrade the master cylinder for it to be effective which wont work since i have a 6 speed manual which slaves to the stock master cylinder. Are you still satisfied with what you installed so far?

[@gpfdrizit]

So you don't get the same levels of rust as we do in the Great white north but if you want your rotors to always come off with no extra motivation, coat the hub in anti-seize

[@RobertKohut]

Nice!!

[@NigelNaughton]

You should remember: Anti-sieze is your friend! ;-) Put on between your rotor and hub and between rotor and rim, etc. etc.

[@chuckgilly]

Aluminum anti-seize is not your friend, it's too toxic. Pony-up the extra $$$ and get Copper anti-seize. From Russia, with LOVE....

[@cole33333333]

Carbon Fiber-Ceramic Brake Pads are a upgrade over semi-metallic

[@rco8499]

you should changed also the rear parking brakes pads to avoid scratch the new rotors... @ 13:49

[@AceGoodheart]

The more changes I do to my Jeep the more changes I need to do to my Jeep. Get a 3 1/2 lift with 35" tires.....a new drive shaft will need to be added soon after. Install a new steel bumper w/ winch & lights......new brakes will be needed to stop that additional weight. I still got a Dana 30 front axel housing that'll need to be replaced down the road. Especially if I plan on going 37"'s. Not to mention regearing.

[@marcgohn9532]

Brad I was wondering how you like how these are preforming now that you have run them on and off road for a while?

[@davidgutierrez5503]

Vehicles with disc brakes all around. Rarely have a very firm pedal. Due to no adjustment to the caliper. If you had rear drums your pedal could get firmer. Cause you can adjust your rear brakes tighter. You will notice the difference in braking on the street and down hill trails.

[@ashtonmariefranklin725]

How often do you flush out the old brake fluid. It's recommended to be done. Every 2 to 4yrs. As brake fluid breaks down. Plus its a great way to get sum good brake pedal feel with fresh synthetic dot4 fluid

[@Venom-kq5xz]

Since it’s been over a year how would you rate the Teraflex brakes now? They seem pretty meaty, just for the price I’d hope they’re worth it. About to put some PSC armor on my JLU other than some other suspension upgrades and bumping up the tire size from 255/75R17 too 35x12.50R17. I’m hoping the ball joints and brakes can hold out for a bit more, but the Jeep still has under 4K miles on it. Awesome install video!

[@dougharlow6037]

Just curious, why you wouldn't want new rear brake pads that have a proper corresponding compound and better rear calipers, to again match the braking system?

[@markpate9656]

Brad, great instructional video and it was good to see the comparison on the stock and upgraded Teraflex rotor and caliper. Bigger upgraded brakes are one of the first things a JK needs after moving up to larger tires. Did by chance you take look at the Dynatrac ProGrip Brake kit? I have heard the kit works well, but they (unfortunately?) utilize the stock brake caliper assembly.

[@huruguru]

Mark Pate w

[@TrailRecon]

The only reason I didn't go with the Dynatrac was because I wanted the dual piston caliper, but I know folks that have been happy with their ProGrip brake kits.

[@TheCluadius]

Just FYI for anyone looking to do this upgrade, do NOT use brake clean to clean off the rotors, I work with these rotors on a daily basis and it can ruin the coating on the outside. If possible, AC cleaner is a good alternative but if unavailable use a microfiber cloth and alcohol

[@davidkay7389]

Needs the bigger brake booster upgrade as well

[@travissnyder6484]

Did you end up doing a review video on the Fox shocks that you mentioned in the video?

[@ridiculex834]

Hey Brad, I think I need to do the BBK upgrade. 18 months in, are you still happy with the Terraflex or would you reconsider?

[@davidwitcher5443]

I'd love to know if any of those parts are factory parts from another vehicle.

[@BrianSmithTheDukeofURL]

Hi Brad, was wondering if the vented brakes are better or worse for off-road use? Seams like they would just plug up with mud. (I live in Florida)

[@JustinKingOffroad]

i'm really surprised the rear didn't replace with a dual piston caliper.

[@myjeepjkprojects9625]

Hi Brad, I just subscribed to the channel a few days ago but have been enjoying your videos for a couple of years. Are you still happy with the Teraflex big brake kit? Keep up the great work!

[@TrailRecon]

Welcome to the channel! Yes, the big brake kit has been one of my favorite upgrades... significant difference!

[@apexpredator_jku]

If you want to take full advantage of any Big Brake kit then big bore master cylinder upgrade is necessary imo. What's the sense of upgrading to 54mm dual piston calipers if you're not giving them the additional fluid volume that they require to optimize performance? You're just increasing clamping surface but not clamping force.

[@RedRockCrawlers]

Looks good brad, With Teraflex right up the road from me i've looked at several of their products with interest and this is one of them. Do you know anyone in your jeep groups that have gone with alternative brake upgrade kits? How would these compare to other options out there? Thanks for all your hard work you do in creating these vids

[@TrailRecon]

I think just about everyone I know has been happy with their upgrades over stock, but tough to say which one has the best stopping power. I think a side by side test with someone else's big brake kit would be interesting... but there would need to be a lot of factors that would all have to be equal to be "scientific" enough for youtube viewers.

[@brucealzona]

Do you need to change both the front and rear or just the rear? in case of budget limitation?

[@jeffreybishop2967]

Curious about the caliper bolt patterns. Would the Teraflex dual calipers bolt to the factory bracket? Or would the factory single piston caliper bolt to the Teraflex bracket? Thanks

[@Quetz43]

installing the Teraflex Big Brake kit, did you have any issues with the brake proportioning valve?

[@chrisanthony7552]

I put 18s on my Tacoma and I am also due for new front breaks. I'm going big so should I replace front and rear at the same time?

[@kramcredo]

I have a 2016 jeep wrangler, i was planning on doing this upgrade also. Do i need to get the heavy duty mopat brake master cylindet as well? Thanks

[@kurtnulf3362]

You know I have been watching install picks a lot lately to get ideas for my jeep and I have figured out that a lot of these are people who get free parts sent to them from the factory for making these videos .So must of these videos are nothing more than payed for by parts advertisements .So of course after getting it free your post will be always glowing I would like to see a review that the product is junk for once

[@Surge1045]

Brad, so it seems as though the rear brakes didn’t really significantly enhance the overall braking. Is this the case? I just went to 37’s and am considering whether doing just the front brakes.