Jeep Wrangler JK Barricade Front Skid Plate (2010-2018) Review & Install

[@extremeterrain]

Shop this Barricade Front Skid Plate: terrain.jp/2kKtGpu Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@michaelogrady2867]

Harder than it looks. Tough install on a Rubicon, especially if you already have a winch mounted. The front bumper does actually have to come all the way off, so the winch has to be removed or at least disconnected and swung out of the way. A motorcycle lift or some thing like that is definitely a big help. On a Rubicon, with the electronic sway bar disconnect, there is no room to re-tighten the bumper bolts. Your options are to come in with long socket extensions from the rear or try to fit your hands through the small holes in the front. Either way is tough and takes a very long time. It seems good now that it's on, but I'm in real trouble if I every have to take it off again.

[@forgiven21801]

Oh boy!! Sara!! Most excellent job. I really enjoy your videos. Wow! Cant't wait for your next.

[@Fadeux]

Did you only install 4 of the 8 connection points on the bumper?! And why no spacers on the other 6 studs?! Watching her crank down that top nut and pinching that gap just makes me cringe...

[@CarlosRodriguez-oq4hq]

You suppose to put extra washer in the top bolts to prevent the bumper to tilt up? Won't be straight

[@tgjaedan]

So, I have this exact combo. Build and quality are really nice...very tough bumper and skid plate. But the design of putting the skidplate between the bumper and crashbar is really poor and keeps your bumper and hardware from making flat contact. And your install completely ignored the darn near impossible bolt and nut on the inside of each mounting plate on the crash bar.

[@drillbittreed10]

That's because you have the old version. Lol

[@tgjaedan]

@@drillbittreed10 So what...the new version just doesn't have bolts on the inside? Not sure I want my bumper with recovery points secured with half the hardware.

[@drillbittreed10]

@@tgjaedan .. I don't know I was just pulling your leg

[@georgeshowalter8011]

What impact gun??

[@johnrodriguez3760]

Will this fit on a fab four lifestyle w pre runner guard bumper? I have a jku

[@cheetosavalos4456]

Does this fit with all bumpers? I have an oedro on now

[@donhgr]

Loctite