Shop these Barricade Slim Fender Flares: terrain.jp/3mxLIsj Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
@iwheelhard4692 жыл бұрын
I'd be furious if that was my rig! How do you drill something out & not touch up bare metal? You can't even rectify that once the nutsert is crimped on.
@apexpredator_jku2 жыл бұрын
Drilled out the holes & left the metal bare? That's a auto-fail...y'all should know better especially being in the North East.
@dwizl72132 жыл бұрын
That's exactly what I thought to myself. Not only is it a fail but they literally documented their fail on video for the client to see, so when that fender panel starts to rust out that replacement is on ET.
@1badcumminsjr2 жыл бұрын
13mm cresent wrench. Gotta get me 1 of those.
@joaopedroalbernaz2 жыл бұрын
I need one too. It will go with my left handed hammer, my cordless extension and my curved drill bits
@1badcumminsjr2 жыл бұрын
@@joaopedroalbernaz All the necessary tools for changing muffler bearings and turn signal fluid.
@jocklablue68382 жыл бұрын
I like them! But I think the inner fender liners at least for the front should be added
@xblackjeepx2 жыл бұрын
Those are gorgeous! I want those.
@extremeterrain2 жыл бұрын
They're sharp, right? Thanks for watching! -Zach
@donhgr2 жыл бұрын
Definitely would go with a metal kit fender. A lot of work to be putting plastic back on. 13mm Crescent LOL
@Richard-il3lv2 жыл бұрын
Very poor installation, poor use of tooling & no corrosion protection on drilled holes Looks awful without inner flares
@johnboudreau51352 жыл бұрын
Horrible installation. Why are the fenders not made to fit the factory holes? The wheel wells look terrible. Very disappointed with the look of the product and the video.
@iwheelhard4692 жыл бұрын
If they were aluminum or polyurethane flares then factory holes would suffice but with steel you'd have to step it up a size to accommodate the extra weight. But for heaven's sake, if you're going to drill the holes out you can't leave the metal bare to rust out. Horrible install.
@iwheelhard4692 жыл бұрын
If you like Nemesis try me
@v8felon2 жыл бұрын
Look really nice but at 300 idk
@rogerbaldwin8376 Жыл бұрын
What size tires are on that jeep?
@extremeterrain Жыл бұрын
Pretty sure these are 305/70R17s! -Zach
@rogerbaldwin8376 Жыл бұрын
@@extremeterrain thank you for the response!!! Love it and love the site!!
@Nickvrey2 жыл бұрын
What about JL’s?
@extremeterrain2 жыл бұрын
These won't fit a JL, but the ones in the following link will! Check them out! -Zach www.extremeterrain.com/barricade-jeep-wrangler-tubular-fender-flares-with-led-drl-marker-lights-j132136-jl.html
@ShartyMcPoops Жыл бұрын
WOW!! You scratched that guys front fender so bad and you broke the wire harness clip while being zoomed in on the shot. Every time you used that plastic pry tool you can see new scratches. No masking tape in the entire warehouse? And…who taught this guy how to use tools? Bring the women back for the installs. Holy crap I’d be pissed if that was my Jeep.
@herrsnyder15052 жыл бұрын
Would these fit on a jku?
@extremeterrain2 жыл бұрын
They absolutely will fit on a JKU! -Zach
@jasondorn50742 жыл бұрын
Video would have been better without annoying loud music.
@mdbaird7610 ай бұрын
22:34 is the most cringe part of this video, but from the jump I was like how did they edit this video and feel any of it was good? From calling tools the wrong name, to no paint protection, to no paint, to walking the drill and not using the center punch in your pocket. Holy crap would I be pissed if this was my jeep like many have stated in this comment section. I get a lot of stuff from XT and this video was a total let down on the quality control. Please take any tool that man picks up and remove it from the room he is in at once!!!!!
@drakehuber95232 жыл бұрын
First comment 😎
@privateundisclosed44482 жыл бұрын
Screw that nursert BS!
@extremeterrain2 жыл бұрын
They are a pain sometimes, but they get the job done! -Merideth