Jeep Wrangler YJ Chevy 350 Engine mounts

I 350 swapped my YJ a couple years ago but now that I'm linking the front with my 1 ton swap, the mounts that I chose to use are in the way so I am swapping them out for some mounts I got from M.O.R.E that will give me the space I need for the upper link.
mountainoffroa...

[@Blacksheeprc2024]

Been wanting to follow a more current build on a yj appreciate you filming it

[@KBWheelin]

Thank you! Appreciate you following along

[@mjenner89]

"Now I can put the new ones in." **throws motor mount on the ground and walks away** 🤣

[@krisbruno8013]

That’s what I do with everything hence why my garage is a mess 😂

[@MartinHernandez-qv4vc]

Have 1989 jeep yj lerado want to do a 350 swap 5.3 and trany but just want to keep the leafs in the same location just axle swap just a 4.5 or 5 bds lift 33×12.50 r15 and change gauges

[@KBWheelin]

Sounds like a fun rig. This yj im doing ran that way for years and was a blast. Be ready to do an anti wrap bar tho. I run intellatronix gauges cause I like the digital look and there priced decent. Good luck on your build 🤙🏻

[@keithreisinger1529]

What transmission are you running

[@KBWheelin]

Right now I am running an ax15 but I am rebuilding a 700r4 to swap to

[@keithreisinger1529]

@KBWheelin cool I have a 700r4 I got to use for mock up and then will have to rebuild

[@KBWheelin]

@@keithreisinger1529 I think the 700r4 is one of the best transmission options for the 350 swap. Plus saves a good chunk of money not needing an adapter. What transfer Case are you going to be running?

[@keithreisinger1529]

@KBWheelin my plan is to run a 205 but I have 2 np 231j with slip yoke Eliminators that I picked up so I'm torn

[@krisbruno8013]

@@keithreisinger1529 I’m gonna be running a 241c / 231j hybrid case that way I don’t have to run an adaptor till I get an atlas.