Jeff's Homelite Super XL Fuel Hose Replacement & Test Run!

[@LawnZip]

Thank you for guiding me through another repair sir! The gift of knowlage is the best gift humans can give! Keep up the good work!

[@wisheye1]

I just bought my first Homelite, it's a 1972 super XL and it needs a fuel line. Thanks for the video Leon, love your channel, I have learned a lot from watching you. Thank you!

[@justinweaver8787]

Very nice saw u worked some more homelite magic sir.

[@DickWheels]

I couldn't get line to fit my 450/550 correctly. One line was too small and 1/8x1/4 was too big. I ended up drilling out the tank a touch to make the 1/8x1/4 fit. It took a little getting it installed but it's so much better. Nice And tight with no leaks.

[@markluxton3402]

Your videos are very helpful. I should have watched them two decades ago lol I have an XL-12 with a copper tube sticking out towards the carb.. The in tank hose is off, stiff and a bit short, but the filter looks good; I changed it many years ago. Well I can not feel a barb in the tank with my fingers, to put a new hose on??? Do I really have to remove the clutch, or more, to get at it? Should I remove the copper and run straight hose and grommets? I have been looking at parts diagrams, but the saw only has a SN and XL-12. Most of the parts look ups want a UT(type) number. I was hoping to have some insight before pulling this saw apart further. I am not concerned so much with making the saw original. I want my saws functional first. I only became a "collector" of XL's because I liked how they worked...and told people I liked them...next thing I know......lol

[@EvanLifts]

Hey Leon what size is the fuel line? Mine has the exact same problem!

[@jeschreindl]

Nice work Leon 👍🏻

[@PogoInTheWoods]

I tend to fish from the other direction to more easily grab the fuel line.

[@tedmiller1745]

Is the grommet the same on the air box and the fuel tank? Gotta find some..

[@farmbossmikey1350]

hi mine is having the same problem as the bule one and how much fuel line needs to be at

[@vinepatrick8034]

Where can I buy a xl98 carburetor for the multi purpose saw

[@mick5740]

Sweet video

[@darylstephens4429]

what size fuel line did you use……ID x OD? Thanks

[@hiphopman72]

Cool

[@notavailable7379]

Where do you buy your fuel line in such bulk? What sizes do you buy in such bulk? (most common) where might i do the same?

[@SlimTortoise]

It's looking like he does not answer questions 🙂

[@blackseabrew]

So what size of grommets do you use. As in a range because I think my XL hole were hogged out.

[@garyrichard2177]

I need fuel line for xl-400 homelite or just gave me size and length please.

[@indianavintagechainsawguy]

I need to go back and learn how to read a tape measure

[@tonymayhew191]

I have a XL500 with the weird filter at the bottom of the tank, And it appears that you have to disassemble the whole damned thing to get a filter down in there? It sucks when the saw is all original and you don't want to modify it! But that sure looks like a pain in the ass just to get a filter down in there!🙄