Plastic and Glass waste recycling into Concrete Brick

Turning Waste plastics and waste glass or vials into concrete paver bricks.
Machine Used:
Plastic Shredder
Glass/Vials Crusher
Concrete Brick moulder
Multi-purpose Mixer
Subscribe to stay tuned for more updates.
Like our page: / fskbuilders
Follow me on Facebook: / jervinchristian
We are located at Tarlac City, Tarlac, Philippines

[@alecsandru8588]

more technical detailes will be a must in my opinion. there are a lot of questions regarding the resistance of the tiles, the insulation value and so on! Nice job, but provide a detailed data sheet of the final product!

[@katrinavillanueva8091]

Sir JT, reusing old oil and turning them into bricks without new sand --- how AMAZING !!!

[@scottjohnson8642]

This could actually be a a world changing idea. If we could mass scale this sort of operation. We could Easily minimize plastic waste by using it to pave driveways, roads etc.

[@tommymoua3274]

its actually a terrible idea because its creates pollution and safety hazard, why do you think the government hasnt done it yet

[@gooddys9746]

Memorable bright idea That we make waste into micro form into hallow blocks I think this business was so great make build a better city. Tumbs up guise keep it the good concept to be a better clear and greens.

[@JK-zz3mv]

Mmmm nice. I love micro plastic in my environment!

[@tarrahrichardson4400]

Amazing, innovative. Keep up the good work!!!

[@jonathonstump7344]

Can you rent the machines? That is incredible. I have tons of plastic and glass I need to recycle.

[@wayneparke554]

They are in the Philippines.

[@mortarriding3913]

There are open source machines for plastic shredding, and there are budget glass crushers around. Check Precious Plastic for the shredders.

[@tswanasauce9907]

@@mortarriding3913 where are Precious plastic located?

[@badnaammasterumrolia2146]

@@wayneparke554 your business website sir?

[@JDNazzz]

Hai sir where are u frm I would like to contact you for these managment can pay u

[@1nefes1ses]

It is excellent idea for recyling plastic wastes

[@josephparungaoandchristine7362]

Mgandang idea to reduce the waste we have now. Strict implementation of total eradication of single use plastic po. Use ecobag or paperbag instead

[@borednz2982]

And all packaging...bottles,toys,furniture, etc etc

[@MichaelAMalone]

Yes very good, I'm also wondering about compression strength, water absorption and especially R value or insulation properties.

[@TrabajosL3on]

🙏🙏🙏👍👍✌️

[@sunwanchen]

I have seen two types of recycled tiles: with or without melting the plastic. The melting type of production is less pores and less conductivity on heat, also less likely to have mold. Not sure on this non-heat type, assuming lighter but similar property as traditional brick? Maybe less heat / impact resistant?

[@DinoPasic]

Nice, but it can be also melted and then pressed, without cement.

[@ogwafszpadilla2778]

Amazing 👌

[@JoeSmith-zg7in]

Now make big shredders and put your ground up waste plastic with closed cell Styrofoam cement powder krystoloc to make the concrete harder and re ground Styrofoam. Make molds for 8 foot high walls that have 4 inch square mesh wire for strength and holes for Windows.and conduit for electrical. Make the wall mold 10 and 20 foot long and have it lock together at the corners. You can make bridges water fall features garden art rock walls.i don't call that going green I call that going smart.

[@murlee6930]

Hi Joe, Is it safe for health,, is it strong, harder,, waterproof,, and durable??

[@tyndareus4139]

Very Inspiring!

[@wemcal]

Great video

[@ANILKUMAR-ru9ql]

Nice work

[@cristobalhernandez4068]

Saludos cordiales de México 🇲🇽

[@adeolaobayan7735]

No heating of the mixture? How strong is the product and how long first it last?

[@tvdregs6139]

it's cement, it doesn't need to be heated, it gets stronger when it's dry

[@enerjoblasti4271]

Good appreciate it

[@cherylpink1544]

That is great idea

[@estherhomestores6133]

Wowits really useful vedeo we also learn and get knowledge T / q

[@brotherowl]

You could also make good use of exponentially more of that material a whole lot more easily if you simply added it to asphalt and cement walks, walls, and foundations.

[@pheebsdazon3469]

May I ask, what kind of structures can this kind of. bricks be used for? Are they less or more prone to burning as compared to conventional bricks? Can you vary the size of the bricks using the machine?

[@sulaimanaby6953]

Cool 😁👍👍👍good joob

[@wayneagunaydalanon9282]

Sana dito din sa pinas

[@bm8641]

Thirld world quality product for thirld world people.

[@subashfarmer]

Good idea without heat plastic recycling is the good idea but increase Brick size bug size then only reduce more expenses for construction materials and Labour cost ... I'm Subash Farmer from India

[@kamarasantigie6978]

Great job guys. I want to replicate the same in my country but how would i get this machines to buy?

[@abrwandatv2889]

How much does it cost mashine those mashine

[@renusachdeva2613]

government should establish these types of machines in every city and village to solve this global problem

[@myaim9874]

Very Very Very Costly Bricks With LOW strenght

[@awaleisse6061]

That machinery is needed

[@mr.goldfarmer4883]

whats the compressive strength of one of these blocks?

[@Funny_moments763]

That's cool

[@TrabajosL3on]

👍👍🙏🙏

[@deannewbury8987]

how strong or durable is the brick compared to normal bricks

[@vijayalakhami9414]

What is the compressive strength of that brick?

[@revie1974]

what are the quotations for your machines ie. the crusher/shredder and moulding machines

[@stewpido5546]

I just have question, would this makes bricks more cheaper?

[@aneeshkallada362]

Please Mention the compressive strength and water absorption details

[@TrabajosL3on]

👍👍👍🙏🙏

[@muhammadalikashifkhan5556]

Best use of waste polyurethane

[@peterzenhorst930]

What happens when the bricka are at the end of their lifespan? Does the plastic waste end up in the envoironment anyway because you just made an un recycablenproduct out of it?

[@peterrivney552]

Very good question

[@dave5litre462]

Concrete recycling is and has been around for many years now therefore I believe this may be a never ending recycled product , I’d be more concerned about safety to the barefooted folk walking on glass shards as the bricks would in time break down somewhat....

[@peterzenhorst930]

@@dave5litre462 I was not concerned aboit the concrete, neither about the glass. It is the plastics thats the problem. The grind them down to the stage of micro plastics and then hide them in concrete. So you cannot burn it, you cannot recycle just the concrete because its contamminated, so it probably ends up in landfill where ot releases said micro plastics to the envoironment. That was my point.

[@glenvillis2385]

You do the same as they currently do with concrete... you recycle the bricks and make new bricks out of them again. Pretty simple really.

[@1nefes1ses]

I think its very useful for recyling plastic wastes.. there are reinforced concrete structures everywhere and no plastic used. Since plastic does not recyle properly and absort it, mixing them in reinforced concrete structures is a very good idea if its durable.

[@thomascochran1052]

Thanks for showing me how to just make concrete with plastic and bits of glass....I'll just stick with regular concrete

[@TropicalOceanCleanup]

Making hollow blocks from this should be fine. In the Philippines they most always have a skim layer of concrete or motor mix over the outside.

[@dologongpoloponobonotongpo235]

Maybe this can also be used to make rooftiles? Like old clay roof tiles

[@robertwilliams1112]

Beautiful bro, how can have the machine

[@Sewing_Stationz]

Well done. Please, where can I get this machine in Nigeria?

[@docesam]

i once upon a time was told that the expensive part of building a house is not the bricks or pillars , but rather the finishing : painting and stuff...

[@chrisardenpanes7071]

yo, i'm trying to figure out a way to re-use the torn out single use plastic trash produced by my family every week 🤔, i planned to buy myself a trash shredder but i don't have any idea what to do with the grits that will be made by the shredder. This mix is kind of interesting to me, no melting needed and accidentally inhale the toxic fumes. I wonder if the mixture can hold together for creating a proper plant pot? or it's just for creating bricks?

[@katkinslow]

Yo Me too I also want to build caves for outside cats here in Florida! I think this might be a great way to reuse recyclables!

[@engcyprianfuime2049]

Will it be cost effective bricks??? Cement, sand, shredded plastics, + glass, how much will you going to sell compared to traditional ones with sand +cement only??

[@TheHolyFaceofJesus]

Wow...can you share the technical details plus the equipment pricing

[@christinesambou1176]

Where can I get the recycling machine from

[@rabbithunter8510]

3D parenting house’s could be made from this. Imagine if man would just do things the way God Almighty intended no body would be homeless and no body would be in debt.

[@dharmateja4764]

Really great sir

[@pgchrmo6806]

how to buy the machine?

[@jn1ty]

Just wondering how structurally sound they are? The glass would be fine but the plastic would be a weak point in the brick.

[@radleyadarlo350]

Tnx po

[@adriantabin5389]

Mga magkano po yung shredder? At saan po pwede makabili? Salamat po sa response

[@gilbertnkeptchouangdiehou2222]

Bonne initiative. Mais de grâce les ouvriers doivent se protéger.Ils doivent porter leurs EPI(équipements de protection industrielle) ceci pour leur santé.

[@tatookhan5202]

It's better to not use plastic in bricks But glass can be used. Better to use plastic in different alternatives. I have seen a restaurant which is floating in water with plastic bottles. We can make different ideas. It depend on our thinking.

[@shafiqurrahman8539]

I would like to get al those machines.

[@keisha.dechaca]

Nice job po💪 heat resistant po ba to? And naaapektuhan po ba durability ng concrete brick?

[@algreen266]

Is this method cheaper that sand cement and crushed stones??? because i still thing that a normal block is still cheaper!

[@jessamaerada1631]

saan pwede makabili?

[@namratatamuly4074]

Should we heat the plastic while making the mixture??

[@saibabagarden]

if u heat, u'll get perfect bricks with only plastic and glass, no need cement! (this guy is wasting cement). However, some poisonous fumes will come out, u need filter. A residue from filter u add into your mixture, don't waste it into environment!!

[@pearyo7085]

Home made?

[@goldwinger5434]

Interesting idea. However, I have a couple issues. One is that glass is easily recycled into new glass. Why destroy something that can be recycled? The other is that plastic degrades in sunlight so the bits of plastic aggregate that are exposed to the sun with break down and cause the surface of the brick to crumble which will eventually lead to total failure. I'll also echo the questions about compressive strength and water adsorption.

[@peterrivney552]

I agree with you 100%. Glass it totally recyclable and I'm wondering about the plastic as well some plastic break down fast while other's I'm not to sure about... But look at everything now of days is disposable faster than they used to be..

[@michaeltucker8645]

I also agree but most applications I'm seeing this used in is like pavers walk paths with only foot traffic

[@michaeltucker8645]

That and you could easily coat the outside in something that covers any uv penetrating to the plastic

[@m-cmedia4536]

Tru

[@_FROM_UK04]

@@peterrivney552 i tried using mud + lil bit of cement (hmm maybe 1 sag ) left during renovation and all + plastic left like kurkure's and other stuff and it's pretty good i meant not that great as am not a professional am just a highschooler but ya it was pretty solid

[@drritujain4897]

Machine ki kya cost h btaye

[@nomosview901]

Sa ibang bansa pinapadaan sa heater para yung pladtic mag melt para dumikit sa semento.

[@vishakhasah8310]

What is the liquid they are using? Is it normal water or something else?😫

[@musthafaibrahim679]

Are those safe from fire and heat?

[@borednz2982]

No

[@thegeneral1469]

All bricks should be made like this by law, turn waste into money.

[@tbone5654]

How about letting the market decide? You think people in gov are so smart that they should interfere and distort everything we the people do? Did you know USSR tried this with disastrous consequences? You should try studying economics a little.

[@peterrivney552]

What if the plastic breaks down and causes issues with the brick down the road or chemical reaction oils in the plastic PCB or toxic substances ..

[@santpaul2168]

Why plastic in concrete mix not utilised by builders , it's strength durability,sealing properties visa vis normal concreting should be published and encouraged.

[@vv720]

hmm, Plastic in concrete lasts more than your descendents

[@amjadiqbal6614]

Dear Sir, we are working on plastic waste recycling. We need machinery and idea about bricks

[@saboorali1687]

Hello sir did you got any response from them

[@saboorali1687]

I am also working on it

[@melvinnizelalarca8423]

Syempre mahal ang bricks. Presyong pinoy negosyante e.

[@user-zj4pi7gi4i]

Given me this meching.I'm From Bangladeshi 😢

[@myaim9874]

*क्या प्लास्टिक को रेत या कड़ी बनाया जा सकता है ???*

[@damandeepsingh8542]

Very goid

[@damandeepsingh8542]

Good *

[@aroonmohip448]

Where can I get these machines to purchase as well as the molds. I'm also looking for machines to do plastic waste

[@magrandemachinery9412]

Escribame a whatsapp:[phone] or email:[e-mail]

[@urgencepc4563]

Where can we find such shredder?

[@marijabo7162]

The impact of plastic on human health has not been sufficiently researched, and controversy lurks around the corner. Recycling is being must, but some research shows that recycled plastic can potentially be an even bigger health problem ...

[@Shield.148]

Is this being done in the US ?

[@kintinogomis3163]

Bravo avec votre boyeur de verre combien coûte

[@rafaelsouza9518]

Boa aqui Rafael do RJ Tijuca blz como q eu compro essa macna.

[@ravi201184]

What proportion can be tried without shredded glass pieces?

[@mortarriding3913]

Glass is just a substitute for sand and gravel. Fine glass is superior to regular sand, large glass pieces are inferior to most gravels, but a replacement nonetheless.

[@KenMikaze]

@@mortarriding3913 glass is made from sand, btw.

[@asharathi6887]

How strong are the tiles, for how longer they stay good

[@vanessaparker6232]

I do believe glass plastic combination would be quite strong. Stronger than most concrete cement mixers. The sectret would be in the quality of manufacturing .

[@TUNNEL_KNOWLEDGE]

What is the preposition of water in this?

[@toshockamazeandamuze8531]

where is this??

[@quickyreviews6597]

How mush is the shredding machine?

[@saivedantshukla1298]

Boards bhi with copper sheet or etc

[@saulosardinha7981]

É fácil adquirir?

[@fiyahwayne495]

You guys should give credit to the person who came up with this idea..

[@shadyman6346]

You mean blame them for this idea? Chemical dump for the backyard? Terrible solution...just awful.

[@fiyahwayne495]

@@shadyman6346 people just working with what they got...government wont make the country any better and help its citizens. You are passing remarks but i dont see you helping them in anyway..if you got nothing good to say i suggest you shut up.

[@peterrivney552]

I remember back in The mid '80's I had a set of screwdrivers in my tool box that were wet with an oily substance around the handles.. put them into plastic bags and brought them back where I bought them from they replaced them with better ones no charge they didn't want to touch them as well they just opened the bag and you could smell the viniger kind of smell P.C.B.s coming out of the plastic I heard of this from generators on hydro poles transformers etc. Where a sub station had some equipment break down and had to have a crew come in and clean up some people's property becouse of the cancer causing spill. . What if the same things happen with these bricks the plastic breaking down and toxins leaking out from the plastic...

[@sequoiatv3877]

Sadly these videos involving plastic bricks or tiles never provide any long term research information because there isn't any. This isn't a long term solution it's a short fix that might make problems in the long run, only time will tell because there is not the same safety standards in the third world. where all these videos are from with the melting and or mixing of plastic.

[@Landy82c]

I need cheap n hard brick To build the school hall Like cinema, but the chairs itself are the brick stairs. Put on the wood / plastic surface and back support, that’s it. Got different height stairs based on different age, grouping, teachers, parents,guest and judges and mc. 180 degree hall accommodate around 400-500 ppls Comfortable eye seeing stage height

[@saulosardinha7981]

Quanto custa essas máquinas

[@merchanthandson5271]

Can we have review sa mga blocks nito after 3-5years from manufacture. Thank you

[@rodrigochinchilla9561]

Hola, cual seria el precio de la maquina

[@jolyzacharie8189]

esta donde

[@bhuvnas]

Can i add saw dust.?

[@V1OL3TE]

EVERY COMPANY THAT PRODUCES ANY PRODUCES, USES PLASTICS IN ANY PRODUCT, OR USES PLASTICS FOR ANY TYPE OF PACKAGING. NEEDS TO BE TAXED BY % TO HELP COMBAT THE SOLUTION. THESE FUNDS COULD HELP COMPANYS AS SUCH PROPEL & START NEW PATHS FOR RECEYCLING.....

[@singhlearningvlogs626]

Portable glass bottle crusher machine aur bricks making machine small size me kamse kam kitne prize ke mil jayenge

[@peterrivney552]

Glass can be melted down in new glass ... I remember as a child bring pop bottles back to the store and getting 10 cents for them.. then they had a better idea plastics to make it lighter and disposable just more garbage for mother earth.

[@rohanramesh6677]

Show how strong it is

[@victoreloka6394]

Great job Please where can I get this machines

[@magrandemachinery9412]

Escribame a whatsapp:[phone] or email:[e-mail]

[@dominicdelacruz1126]

Where can i get the machine? Please mesaage me