HOW TO WIRE + INSTALL RAPTOR LIGHTS ON A 2016+ toyota tacoma TRD PRO GRILLE | MUST HAVE MOD

[@JesseRizo]

IN TODAY'S VIDEO I SHOW YOU STEP BY STEP HOW TO WIRE & INSTALL RAPTOR LIGHTS, ALSO HOW TO WIRE A ADD A FUSE. PURCHASE YOUR RAPTOR LIGHTS: theyotagarage.com/collections/2016-toyota-tacoma-grilles?ref=hrwtrpswem Purchase your trd pro grill: theyotagarage.com/search?q=tacoma+trd+grille&ref=hrwtrpswem Purchase your raptor style lights: theyotagarage.com/collections/2016-toyota-tacoma-grilles?ref=hrwtrpswem FOLLOW MY IG: @_jesserizo Purchase your softop (products also for jeeps & more vehicles): www.bestop.com 10% off discount code: JESSERIZOBESTOP HOW TO INSTALL BESTOP SUPERTOP SOFTOP ON A TOYOTA TACOMA IN DETAIL: kzbin.info/www/bejne/epzLoaqvhp2IbdU PURCHASE YOUR BED STIFFENERS: r4t.club/TacoBedStiffeners Need new shoes? Literally: indestructibleshoes.com 20% off Referral code: JESSR100 Bilstien 5100 (front shock kit): theyotagarage.com/products/bilstein-24-263108-front-5100-series-0-2-adjustable-shocks-2016-toyota-tacoma?ref=hrwtrpswem Bilstien 5160 (rear shocks kit): theyotagarage.com/products/bilstein-5160-remote-reservoir-0-1-5-rear-shocks-2016-toyota-tacoma-25-242539_25-242379?ref=hrwtrpswem PURCHASE YOUR REMOTE START: www.n2designsinc.com/product-page/2016-2018-toyota-tacoma-plug-play-remote-start-kit-smart-key-1 5% OFF DISCOUNT CODE: N2JR5OFF 2016+ TACOMA REMOTE START INSTALL HOW TO: kzbin.info/www/bejne/o6DHmGyriN2SaaM Need a dashcam? www.blackvue.com 10% off discount code: JESSERIZO Need all weather floor Matts? bit.ly/3824zlt $20 off: JesseRizo20 PURCHASE YOUR UNIVERSAL HEADREST PARACORD GRAB HANDLES (PAIR): bubbasgarage.tv/ USE DISCOUNT CODE (10% OFF): JesseRizo QUESTIONS? For Business Inquiries: [e-mail] ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ CHECK OUT MY FRIENDS INSTAGRAMS: chris @Impact_trd nate @nochill_nate Tailgate benches @ Vintagebenches Proud founder of @syndicate_yotas Brenden @brenden951 NEED SLIDERS, BED RACKS, FABRICATION, ETC: @BEASTFAB_SOCAL OR YOU CAN GIVE HIM A CALL: [phone] YOU CAN ALWAYS CALL & LET HIM KNOW I SENT YOU 👍 VISIT YOUR ONE STOP SHOP TACOMABEAST WEBSITE: tacomabeast.com/ PURCHASE YOUR RINSEKIT: rinsekit.com/ PURCHASE YOUR PRINSU CABRACK: prinsudesignstudio.com/product/t2t3-prinsu-cabrack/ I use Viar 300p compressor for up to 33" tires: www.viaircorp.com/portables/300p Forum I’m on: tacoma3g.com ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ WATCH SOME OF MY PREVIOUS VIDEOS: MY 2018 TACOMA ON 33'S REVEAL VIDEO: kzbin.info/www/bejne/m3TUgqlup6loqsk AWNING TO PRINSU ROOF RACK INSTALL: kzbin.info/www/bejne/pqfCpqyvotmipbs HOW TO INSTALL AMP + SUB PLUG & PLAY LOC ON A STOCK RADIO 2016+ TACOMA: kzbin.info/www/bejne/kKPLhWWVlMSYd80 2016+ TACOMA TWEETER INSTALL: kzbin.info/www/bejne/en_RfXebedNkh6s 2016+ TACOMA FRONT DOOR SPEAKER INSTALL: kzbin.info/www/bejne/mX24Z4GnqKp9m5o 2016+ TACOMA REAR DOOR SPEAKER INSTALL: kzbin.info/www/bejne/bKuqqXiYnsalhsU PART 1 TACOMA SOUND DEADEN INSTALL: kzbin.info/www/bejne/lafboYdsZ6aDZq8 PART 2 TACOMA SOUND DEADEN INSTALL: kzbin.info/www/bejne/n6GtkpRridCorKs 2016+ TACOMA HEADLIGHT INSTALL HOW TO: kzbin.info/www/bejne/p5zbe59mgLCHoK8 2016+ TACOMA TRD PRO 2018 GRILL - WITH SENSOR | HOW TO INSTALL kzbin.info/www/bejne/sIexh36krteVaZo 2016+ TOYOTA TACOMA TRD MBRP EXHAUST HOW TO INSTALL kzbin.info/www/bejne/qpDQl3d5iceBfs0 2016+ TACOMA HIDDEN BUMPER LED LIGHT BAR: kzbin.info/www/bejne/pZjGmqSliLd_mdk UNBOXING TACO PARTS/MY TACO PLANS: kzbin.info/www/bejne/bWbbgJiOpp2Sjas 2016+ TACOMA LED POD FOG INSTALL: kzbin.info/www/bejne/h3bcl6eKlM2sfa8 AJT KEY FOB INSTALL & REVIEW: kzbin.info/www/bejne/b3KroXmwpLCJiZI 2018 TOYOTA TACOMA TRD CHROME DELETE (COLOR MATCH) kzbin.info/www/bejne/oae9kGl5gsmsars MY NEW TRUCK REVEAL: kzbin.info/www/bejne/mH69m36KfJ6aY7c NOICO SOLUTIONS INSTALL: kzbin.info/www/bejne/eGSamotjoMmfeJo HOW TO INSTALL AN AMP TO A FACTORY RADIO: kzbin.info/www/bejne/mZypc5iBdpKqm5o HOW TO INSTALL FRONT DOOR SPEAKERS ON A HONDA CIVIC kzbin.info/www/bejne/fHrKmpZtZ71kjdk Adam's Polishes Foam Gun | WORTH IT? kzbin.info/www/bejne/q3i7qqCpZs1jZqc Auxbeam LED Review kzbin.info/www/bejne/jqWXm5ikqLafr8U THE BEST CAR DRYING TOWEL REVIEW kzbin.info/www/bejne/nnyTmp6smKuYbtU EZ LIP REVIEW + INSTALL kzbin.info/www/bejne/d5nLhaOHns95otk EZ LIP PRO DURABILITY TEST kzbin.info/www/bejne/poSYqGWcmZekZ6s THE BEST IPHONE VLOGGING SETUP kzbin.info/www/bejne/i4eQgqdqjt1sr6s ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ THANKS FOR WATCHING PLEASE, Like, Comment, & Subscribe for more DIY FOR CARS, RANDOM VIDEOS, CAR VIDEOS.

[@ArmandoPerez-ik3mj]

my friend today I installed my TRD RAPTOR grill and this grill came in ready to install the sensor everything went well all I did was unplug as per video the sensor from the top after re install of grill no problem did not hook up the lights to fuse box ,went to store and the radar light came on saying clean sensor stopped at store when going home sensor was working after driving a few blocks sensor light came back on? we to auto zone bought electric cleaner and dryer applied plugged back in everything ok ,after ten blocks of driving sensor light came back on? please help [e-mail]

[@pineapplesmash6678]

Hey I was wondering if u know where I can do the add a fuse for the raptor lights to work off the parking lights instead of the headlights....mine are hooked up to the headlights and I want mine to come on when parking lights are just one do u know which one to plug into the fuse box to have them come on with just parking lights

[@darthtyranus7683]

I think the funniest thing I've heard is ppl saying it's illegal 🤣 maybe in Cali? I've had it allover the Westcoast OR, WA NM Texas allover not pulled over yet

[@tommycasidy3031]

Hi Jesse, I have a 23 Frontier, I plugged into the accessorie fuse, they stay on even when the truck is off, can you suggest a fix for this ? Thanks Tommy...

[@kergesnimen]

Made an account just to tell you how helpful your video was. I’ve never done any type of car work and installing the grill and wiring dust lights was my first anything. And I nailed it !

[@JesseRizo]

Your awesome!!! Thanks for that I appreciate it a lot :)!

[@mcnuonuo]

The most clear instructions I've seen. Thank you!

[@GenchiDojo09]

The VERY best video I have seen. The way you explained and displayed this!!! Great job!!! Thank you

[@JesseRizo]

Thank you so much for watching glad u enjoyed it

[@jetmech6913]

Hello Jesse, thanks for taking the time to make this video, big help, appreciate it...

[@JesseRizo]

Thanks for watching and supporting :)

[@natejackman7159]

Dude you are the man. The instructions from the company I got mine from didn’t include details on putting the fuses into the wiring provided and I was ripping my hair out for two days trying to figure it out.

[@JesseRizo]

Heck yea we’ll thanks for checking it out :) u can even tap into the inside fuse box to you’ll just need to run longer wire but heck yea lol

[@Thunderbyrd.]

Very good tutorial. It really is impressive. But bro, that engine bay. A clean engine bay is a happy engine bay. 👍

[@JesseRizo]

Thank you :)!!! And I know 😭😭

[@martincobb6937]

You came through once again.... My sister bought me these lights for my birthday. Used you video for the install. Thanks Brother.

[@JesseRizo]

thanks for the on going support martin i appreciate it

[@nickbrand6962]

What size ring terminal did you use for the installation?

[@sierras3532]

the infamous question that I can’t find the answer to anywhere 😭😂

[@br00klyngreek13]

@@sierras3532 🤣 join the club ms....but seriously, it's like trying to find the beginning of mankind

[@sierras3532]

@@br00klyngreek13 that’s what it’s starting to feel like 🥹😂

[@aidansloanmedia]

@@sierras3532 you ever find it?😂

[@whoswatchingme766]

Just picked up a taco and boy this is going ro be a journey! 😫 but I trust you. Glad I found your channel. Thanks for the videos! I can't wait! 😎

[@JesseRizo]

Congrats :) and thanks man for the support man

[@corypetersen9032]

You made this install easy. Watched video then installed. Thank you! Subscribed!

[@JesseRizo]

Thanks for the support :)

[@randallupton3622]

Great video. I used different lights they are just round amber LEDs. The “add a fuse” tap was a new piece for me so that made the wiring super simple, went to the fuel pump fuse so they work as extra day time running lights. 7 lights in the same row you used. Thanks again.

[@adamsappl3]

if you add to the fuel pump does it go on and off wit hthe truck as the daytime running lights?

[@randallupton3622]

Alex Yes the lights go on when the truck starts. I have 7 LEDs across the top of the grip as running lights. They show up better than the ones in the headlight. Using the Add-a-Tap means I can take them out easily.

[@trentswinarchuk3881]

Hey Randall, is the fuel pump fuse the 10A "INJ" fuse?

[@trentswinarchuk3881]

and did you still use a 10A and a 15A fuse to plugin to the add a fuse connector?

[@randallupton3622]

@@trentswinarchuk3881sorry for the delay been cleaning up the Gladiator and working in the yard. But, no I used the F-04 on the edge nearest the motor sided edge of the fuse box. It is a 20 amp so just put in a 20 amp fuse on both. Massive overkill in the little LED s. I’m up to 15 bulbs now. 2 - in each of the outside vertical 3 in the center. Almost looks like a light bar … just not as bright.

[@teamslaiyans3808]

Does it have to be 15/10 on the fuse or can it be 10/10 ?

[@agoogleuser1495]

My raptor lights came with a 15 amp fuse in that spot, so that's the size for the raptor lights. You don't want to go smaller.

[@artsolo5389]

Basically, the add fuse sticks out to the left, blocking the fuse box from closing. Cannot close fuse box without crushing the fuses I just installed. Help?

[@JesseRizo]

Yes and no there’s a way to get it to close but it’ll slightly clip the wire another way which I’d recommend is add some wire to it and run it to the fuse box inside the driver side cab by your left foot

[@kelseyking5706]

Thank you that was so helpful!! Got my light in and they look so good!! Best video ever!

[@JesseRizo]

Thanks for watching :)

[@Soul_Survivor2]

Thanks. The Eĺectrical part was super useful for me on installing it on my 2021 SR5 Tacoma

[@yulianbarrios8715]

What fuse did you connected to? I have raptor lights already and I’m trying to put some alpharex headlights on my SR5 but don’t know what other fuse to use?

[@AudiSportFan1970]

So good to see I don’t have to add a relay and another switch (I already have 3) into my cab. Dude this is easy and I love your video! Thanks.

[@gonzy7829]

Love the white head lights/yellow fog light combo. Working to get that done to my charger as well as adding TRX clearance lights to the hood scoop. Thanks for the video.

[@wilmafingerdoo2690]

Worked like a charm man! Thank you!! 2018 Toyota Tacoma 4x4 Sport

[@JesseRizo]

Thanks for watching :)

[@wilmafingerdoo2690]

@@JesseRizo Something happened today that I was wondering if you could help me out in resolving. All of a sudden the LEDs stopped working. I popped the fuse box cover off and the add-a-fuse had become loose. However, I did notice a sharp crease in the add-a-fuse line from where the fuse box cover snaps down. Is there a way to run the add-a-fuse wire out of the fuse box without it getting crimped?

[@dmart42195]

Followed your step by step and got it done! Thanks for the helpful video ! I only had a lil trouble making sure not to pinch the wires when putting back on the cover/cap but I made it work

[@AngeloU24]

Any tips on how to do that can’t figure out how not to smash it.

[@dmart42195]

@@AngeloU24 yeah you gotta follow the harness with the rest of the wires and group it with them and then it fits all nicely and tucked in

[@scarrillo31]

With that setup, do the raptor lights turn off/on with the headlight switch?

[@dmart42195]

@scarillo31 yeah, there’s also a fuse to wire it to so it’s on even with the DRLs but not sure which fuse that would be I just wired it to the headlight fuse like the video

[@josevaldez5707]

Awesome video bro! Thanks to your video I was able to install my amber lights!

[@elwalther21]

I first installed all 4, but ended up doing 3 lights at the very top (had to cut into the grill) that was my favorite look

[@waerp11]

Imagine you just fill out the whole grill with these lights 😂😂😂😂

[@33marcor]

Which fuse can we connect it to if we just want the lights on when the DRL are on?

[@fershoooo]

looking for this too..

[@Alpinenutclimbing]

@@fershoooo Did you find the answer?

[@fershoooo]

@@Alpinenutclimbing I did, it's been a while though. I remember finding a video here on youtube of a lady doing it to her truck.

[@ricoruano7213]

Probably the DRL fuse lol

[@papichili6075]

@@ricoruano7213not it smartass

[@jessestone294]

Thank you Jesse! This video was very helpful. Now I am confident that I can do this install very easily.

[@JesseRizo]

Thanks for watching :)

[@JohnShaw26.2]

2:15 your truck called and asked for an engine bay detail 😂

[@jakem1175]

Great vid. Only issue was the outer lights on the grill would not fit,I had to slightly trim the sides of the LEDs using scissors and then they clicked in perfectly.

[@jackhelm1537]

I had to do the same with my Tacoma I just used a file though

[@williambabak6034]

How were you able to close the fuse box without having the red wire in the way?

[@Dcdc956]

Should battery terminal be off when messing with fuse?

[@JesseRizo]

Yes anytime working with electrical you want to disconnect the negative of the battery

[@andreacustica9316]

Is it supposed to be only on when the fullbeam is on?

[@simpleman8264]

Great video im gonna be installing lights on my 22 trd sport and was wondering about using the drl fuse what's your opinion

[@alejandroromero7110]

Would you happen to have the link for the add a fuse connection you used? Want to make sure I'm ordering the correct one. Thanks in advance

[@agustinherrera5600]

Looks good . Hey so how do they turn on ? Idk if i missed that . They are not on a separate switch right . So they turn on with the regular lights or fog lights ?

[@JesseRizo]

They turn on with your low beams that’s how I wired them up

[@autounboxed5098]

Your video helped me install the lights on my 2013 Tacoma, thanks a lot man !

[@raptorburro8527]

Why did you take that specific fuse out? Does it have to be that specific fuse or I can install on any fuse

[@grantspants3925]

Yeah, what was the purpose of the previous fuse?

[@barabhas]

Thanks for the video and instructions. I used these for my 2019 4Runner and it worked just as good.

[@bubdubchub]

Love the video, question: I’ve seen different videos with people stating different fuses for the add a fuse. I just bought a kit that came with 2 5 amp fuses, but you mention a 15 on top and 10 on the bottom. I’m really confused about this. Hoping you can set the record straight. Thanks again

[@pewbangpew8109]

Mine came with a 5 amp fuse but I went and bought a 15 and did what this guy did and I haven’t had any issues…what’d you wind up doing?

[@anthonycaggiano8211]

@@pewbangpew8109 i thought the accessory output (15A) cant be higher Amp rating that the vehicle fuse (10A). i thought it was supposed to be equal or less

[@pineapplesmash6678]

Do u know how to tap the add a fuse into the parking lights so I can run the raptor lights without running the headlights

[@JesseRizo]

U can run a extended wire into the cab and with the add a fuse tap into the fuse box in there look for a open spot that will run when the trucks on and you’ll be fine ima do mine like that just havnt had the time lol

[@pineapplesmash6678]

@@JesseRizo there has to be a spot u can put the adda fuse for the parking lights instead of the headlights

[@mr.c493]

Any suggestions for a 2018 sequoia? I love it!!

[@oscarmanuelgonzalezhernand1224]

Excelente video amigo solo una pregunta el cable ya va directo alas luces de la caja de fusibles.saludos

[@adamwoods3279]

How do you close the fuse box tight with the wires coming out of it?

[@JesseRizo]

I’m trying to find the video I did but I’m having trouble but long story short if you can extended the wire I’d suggest tapping into the inside fuse box look for a acc applicable fuse and tap into that better (I ran it outside like in the video) for the longest never had a problem but it does get dusty in there over time and to close you have to cut a slight slit and even then it slightly pinches the wire which allows slight dust over time to sink in so if u have extra wire I’d recommend that

[@firstlast4100]

Simple get a small round file and put a notch in the plastic fuse box or cover for the wire to sit in

[@scarrillo31]

With that setup, do the raptor lights turn off/on with the headlight switch?

[@CarlosGarduño-l4c]

Amigo es urgente, las luces son compatibles en la tacoma sr5 2018?

[@Flock_Nation228]

Hi, does the ata fuse have to be a 15 and a 10? The lights I got came with an ata fuse already attached with 2 5s

[@JesseRizo]

Those are perfect keep those

[@aminela3858]

Can you please tell me what the gauge on the black wire? Thank you

[@MAPAHaus5]

What os that adaptor that you bought to go into the fuse box?

[@JesseRizo]

A add a fuse

[@bobbys5343]

Is it the same process for a 2003 tacoma? Removing the same fuses, etc?

[@n0torious_n8]

So you did an add-a-fuse plug into the fuse box? Seems like the water proofing is gone and the wire is getting pinched. I recommend getting it hardwired to the DRL's.

[@reddevkev92]

How do you do that?

[@VertoxEffect]

Red Dev Kev best way is by using a t-tap into the drl power wire.

[@jackabato6997]

Got the new TRD Pro look-alike grill and all 4 lights installed and wired up. Thanks for the detailed video, you're the best!!

[@JesseRizo]

Thanks for watching :) I appreciate the support my friend

[@tCrollin]

What fog lights are you running? I've been looking for those but cant find them.

[@JesseRizo]

There diode dynamics ss3 pro here’s the video I made on them kzbin.info/www/bejne/h5_beJiqgtdol7c In that video check the description box because I left a link to where u can buy them

[@MrNelson305]

Dude I truly appreciate it the video. Best one yet

[@JesseRizo]

Thanks for thst it means a lot to me :)

[@MrNelson305]

Actually I need your opinion on tires. I have a 2019 taco 🌮 sr5 been looking at some wide tires but i want to keep my stock rims. What you think?

[@kp7100]

Did you have any TSS issues with the grill

[@KennyBarnes-hf5bk]

How did you get the fuse box to close, with the wire sticking out? Could not get it to click in that corner without clipping the add a fuse wire

[@JesseRizo]

I cut The smallest slit in the lid but if u want to be say I’d recommend tapping into your fuse box that’s in the cab better

[@ErenYeager-hc2qh]

which fuse if i want to light up 24/7 when the engine on? the one u showed only if i turned on the headlight..

[@JesseRizo]

Your better off extending the wires and tapping into the inside fuse box and just look for one that will work when vehicles on you will need a tester

[@jstone401]

You should do a video on how to clean your engine compartment. Lol

[@JesseRizo]

😅😅😅😂😂

[@Monty0003]

I have a query. Please do answer it. If i wire my amber lights with the drl fuse of my car with the fuse tap, will they turn on when i turn the ignition key on cause the drl turns on when i turn the ignition key?

[@σιάμναυλακ]

Will it be the same process for all cars?

[@kmh5293]

When you set the lights up in the wide 4 pattern, did you have to use a Dremel to fit the two outside lights? I was going to set mine up like that and the lights on the end wouldn't fit. Needed a little bit cut out to fit right. It's also an aftermarket TRD grill, not the factory one.

[@ronblitz]

Do the lights have to that color??

[@JesseRizo]

U can get them in different colors link in description box

[@artsolo5389]

So, with the fuse add the wires from the new fuse hang over the fuse box. And you can’t close the box without crushing it.

[@johntrinidad4091]

With this installation, do you need to turn on the headlights in order for the grille lights to work?

[@JesseRizo]

Yes as far as how I installed in the video

[@SlickWillie]

@@JesseRizo you can tap into the INJ : ignition fuse and will turn on without the lights being on.

[@OscarHernandez-xn1yx]

@@SlickWillie even with the same fuses 10 - 15?

[@SlickWillie]

@@OscarHernandez-xn1yx use the same fuse number as the inj...i forgot what it was

[@tntaftershock]

What if I wanted to connect them to the parking lights instead of the main headlights ??

[@christophermichaelcarpio6910]

Great video. I have been trying to figure out where to plug in my fuse and your video steered me in the right direction. You mentioned 10A h-LP RH-LO, My 1st gen sequoia doesn’t have those exact numbers in my fuse box. The closest I see is 15A h-LP RH. Is that the one I am looking for? If so what number of fuse should I go with?

[@jamesburroughs7248]

Great great clip comrade I want some for my Tundra they are nice keep up the good work bro.

[@dagoduchamp9891]

Amazing video bro, thanks 💪🏻👏🏻

[@ivanmedina8612]

what fuse is that ? i have a 2000 tacoma that ima install the lights on i did it on my 2014 cherokee but i had to tap into the lighter fuse since that was the only one that didnt have running power after turning the car off. soooooo what fuse is that ? lol. headlights?

[@javierlovo4291]

do you think i can install a grill like that on a 2007 tacoma

[@JesseRizo]

Yes but not this specific one they also have trd pro grilles for the 2007 Tacoma they look similar but it’ll fit yours

[@javierlovo4291]

@@JesseRizo thanks can i order one for tacoma 2016 do you think it will fit?

[@MAPAHaus5]

Great video and instruction man. Easy to follow. Thanks for the great vid. Subscribed bud

[@JesseRizo]

Thanks for watching :)

[@CodySnell_87]

nice video, can i make them come on with my fog lights only?

[@hermanh7659]

Hey Jesse can you install a TRD pro grille on a 2020 SR5 Tacoma

[@henryotero1385]

Yes you can. They have the same connection on the stock grill. It’s also the same for 2021

[@depecheddurand]

I have a 2021 highlander , can i do the same on highlander?

[@adriannano5257]

Will it be same fuse for a 2019 jeep cherokee trailhawk?

[@EveretTGTxD]

Trying to put the fuse box cover back on its starting to cut the wire sleeve. Is there a channel to put the red wire in?

[@electraglideclyde]

Love my lights, but I would like them to come on with the park lights, but can't seem to locate the park light fuse. Thanks

[@Lkom24]

Will these fit the trail edition grille?

[@donyJen]

I plugged it in that same spot and the lights are always on And how did you run the wire out of the fuse box? Did you trim the seal or what if you just put the top back on the fuse box it crimps the wire?

[@atrujillo7836]

Ordered the grill and kit combo I gave into peer pressure.

[@JesseRizo]

Makes two of us lol

[@atrujillo7836]

I'm never gonna order form Toyoda again my grill was not made properly

[@cesar6246]

hey Jesse have a question ? can you run them with your daylight running lights? and have them be on without having to turn on your headlights? do you have your headlights running all day? thanks bro !! much love

[@JesseRizo]

I’m sure you can you just have to look for the fuse or maybe tap into the drls some how

[@jlrecoder1]

Looks real good Jesse!

[@JesseRizo]

Thank you :)

[@raymonderni5175]

I installed 4 lights already on top of the grille but I'm thinking of installing another 4 on the bottom. Can I use the same fuse that I installed with the first 4 that I used?

[@chefaero]

Can u connect it to fog lamps instead of conncting it on DRL? What if u just want to turn it on together with the fog lamps?

[@TrKn_W_Mark]

Is the lights going to be on all the time or it will be turn on when using the amber side marks?

[@Goobie2021]

Will these lights pop into a factory non trd pro grill?

[@mrrudeman7772]

Where did you buy the ground connector? I can’t find it :/

[@JesseRizo]

Sorry for the late reply and I got it at auto one

[@roberthopkins3923]

Great video but mine only show up with the full lights on they do that show up with just my daytime running lights on anyway to get them to be on for all light settings?

[@chriscrenshaw3230]

Is there a way to run my raptor lights with the Daytime running lights?

[@TheBliz22]

Wondering the same thing

[@chriscrenshaw3230]

@@TheBliz22 I ended up putting it in the INJ fuse since it was the same amperage as the headlights. I tried the DRL fuse since they turn on with the truck, but when I did that the raptor lights were constantly running even w the truck off.

[@JesseRizo]

Yea I had tried that to I should’ve mentioned it in the video but yea it seems it will only work with headlights unless u tie into a switch

[@TheBliz22]

@@chriscrenshaw3230 Thanks Chris. Just watched another video that showed the same. Hooked mine up to INJ as well and seems to be working as expected

[@chriscrenshaw3230]

@@JesseRizo good video regardless!

[@wb4514]

It doesent matter if you have two different fuses in the same add a fuse ?

[@enriquebaquerizo2100]

Do you know if these lights would fit a 2020 tundra with sport grill??

[@watzenggo2446]

Thank you, Jesse, for that video tutorial my question is; for that fuse that you removed from the fuse box was that for the headlight low beam? Was that the spot where you connect the add a fuse harness? Thank you.

[@robertdunn6112]

Great Video Jesse! How can you uninstall to reposition?

[@TmacFL-bu5ow]

Great vid. Thx man. Simple install.

[@JesseRizo]

Thanks for the support !!

[@dylanlayne1287]

I pulled the same fuse as you did and my lights work but only on high beams not sure how that works as I pulled the low beam fuse? Any help would be appreciated thanks

[@skaphones]

why do you put the size 15 fuse with the 10? Isn't the size 10 enough?

[@MuhammadAAli-fl2ec]

How did you secure the cap of the fuse box back on? I can’t get all the caps to click because the wire is being pinched

[@JesseRizo]

There’s a way to seal it properly it will be pinched slightly but it doesn’t effect it I had them on my last truck for the longest with no problems

[@Dreadiii]

Jesse Rizo I tried to close the fuse box on my wires like in the video and it cut the wire in half.

[@Dreadiii]

How did you do it?

[@DiverPilot]

Anyone? I had the same issue. This seems to be the problem for a lot of people...

[@richardrodriguez1128]

Jessie, just picked up a grille and raptor lights from another company. I have a 2020 Taco. I see you are using a 10 and 15 amp fuse on the add a fuse. I see other videos where 2 10 amp fuses are used on the add a fuse. They are tapping into the same slot as you are. Which one should I use? Thanks

[@richardrodriguez1128]

Anybody, thanks

[@zachgiron2989]

I’m using the 10amp fuse. The fuse is to act as a safeguard so incase there is a surge in power. You want to use the next highest rated fuse for the amount of current the device is drawing from the battery. For example (values used just for example) if the lights use 5amps you should go with a 7.5amp fuse. If the fuse rating is too low it would blow the fuse and the circuit would not be complete. I would take the lights to a professional if you aren’t 100% sure what to do.

[@t-bone4908]

When you installed the new TRD pro grille do you need to take it to the Toyota so they can reprogram the censors? Since it got change ?

[@JesseRizo]

No my friend just make sure u get a oem garnish for the sensor and ur good to go I left a link to where u can get the grille and in that website they also have the oem garnishses

[@stingr1971]

I got an oem garnish off of Ebay for $25. Works great. No sensor error. Beats paying what Toyota wants for one!

[@VertoxEffect]

Stingr1971 That 100% is not OEM if it was $25 off of eBay lol

[@renetarango9886]

Hi there I have a Toyota Tacoma 2007 what fuse number do I put the fuse on my truck

[@jasonschettler1672]

Do they come on with the auto headlight feature?

[@carlitoswayz-Okan]

My add a fuse grill lights came with another fuse connected that didn't fit in the fuse box like a car amp fuse but the same size. Have you seen this? I just installed it and it works but haven't seen one after watching the install videos.

[@XDgamer-lk8nf]

Good afternoon got a question for you the grill will it work with other Tacoma or just the trd models ?

[@JesseRizo]

It’ll work with others as well just if u get a 2020 and up you have to make sure u get the Sensor garnish

[@XDgamer-lk8nf]

@@JesseRizo thank you Jesse 😁

[@yxeteotl]

Good shit bro, just installed mine thanks to your video