Replacing A Hood Release Cable - Wrenchin' Up Back to Basics

[@ShaniqaPikes]

At the latch end (under the front of the hood), tie on a piece of parachute cord on the cable end. Wrap the end in duct tape. Then, when you pull the cable out, the para cord will follow the path so the new cable gets routed same as the old. Tie the paracord on the new cable, duct tape it, and pull it through.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and the great tip that might be helpful to others!. Is this theory or have you actually done this?

[@benhopson6808]

@@WrenchinUpwithJimBates I appreciate how you fix things without a lot of exposition. Cut and dry, "this is how you do it." I hate having to listen to somebody's whole life story before they get to the important part

[@patw52pb1]

Quick tricks & tips... Mark the latch assembly position before disassembling. Mark the relative position of the latch to the support structure to aid in alignment during reassembly. I typically make 3 or 4 scribe lines in the vertical and horizontal planes. Note and mark any shims and their position that may be present when disassembling.

[@WrenchinUpwithJimBates]

+patw52pb1 - Thanks for watching and for the great added detail info that is sure to help make some of these repairs easier.

[@WrenchinUpwithJimBates]

+Jim Bates FYI - I used the unrusted mounting surface as a guide for reinstalling the latch assembly.

[@serolog2]

I love it how casually they acknowledge how manufacturer produced part on a $30k + car breaks while being normally exploited. If you think about it there is nothing normal about it. Just happened to me today on VW CC. I pulled and the lever snapped. Granted, I am a superman, but really?! Parts stores must be working with QC departments lol

[@WrenchinUpwithJimBates]

Yup, sometimes it just happens!

[@thehuntx]

Its called wear and tear.

[@princetchalla2441]

@@thehuntx it hasn’t happened on my 30 year old truck yet, with 30 years of use and abuse. So what really changed? Most likely, the quality and durability of the parts.

[@hectorperez7655]

Darn it !! just what I was looking for !! You guys just gained a new subscriber :)

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and for the Sub! We're glad we could help.

[@josephgrey3702]

Thanks so much!! I was able to get myself outta the snow because of this!!

[@WrenchinUpwithJimBates]

Hi - You're welcome and thanks for watching!

[@cheyenneslate4127]

What do you do if the cable itself pops out of the latch but it still works. The other day I pushed in my parking break and my cable popped out. The cable works and does not need to be replaced i just need to know how to put it back in the latch.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I think you must first find out why the cable popped out, then repair or replace the latch problem. A service/repair manual may provide some help with pictures or illustrations of the latch.

[@andrewthompsonuk1]

The last one I did was on a BMW. Had to destroy the firewall gromet in place to get the old cable out - any tricks here?. I always lock the latch with a screw driver as a test.

[@WrenchinUpwithJimBates]

+Andrew Thompson - Not really other than a liberal application of silicone spray and a good yank. That's what Ed did on the Jeep. I suppose sometimes the only way is destruction though. I like your screwdriver latch test. Thanks for the comments and for watching!

[@chrishines4093]

Hey man that's a great video the only thing I would say is maybe a close up when you were putting the cable back on maybe for future reference thanks guys

[@WrenchinUpwithJimBates]

Hi Chris - Thanks for the comment and advise, and Thanks for watching!

[@joelhuff8387]

Closer more viewable visual! Good video

[@thehuntx]

Good thinking with the Duct Tape.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching nd sharing your opinion!

[@donna8826]

Fixed mine today. I couldn't get the hood to unlock, seemed like it was broken. I sprayed some olive oil under the hood where the latch is. I then pushed on the hood and it unlocked, then I was able to lift the hood and sprayed the area a bit more, wiped off the excess and closed the lid, it now works. So happy. My car is a 2003 Toyota Sienna. Hope this helps somebody as this is an easy fix if this works for you.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your experience!

[@Penumbruh]

My Mazda 3 2007 just had this happen yesterday and I was so worried! Now I just gotta figure out how to pop open the hood!

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Sometimes you can grab the cable with pliers to activate the hood release latch.

[@Kamalashairypussy]

Same with my 2010

[@juju1papa]

I own a 2006 Mazda 5, mostly same chassis engine as you know. You have to unscrew and dismantle the hood release mechanism which is a pain. There's two bolts. I had to do it from underneath to get to one of the bolts on the passenger side. Good luck!

[@domedomelinson]

Great video. I have a question. Isn't there a moisture grommet at the firewall entry for the cable?

[@TheBatteryShop]

Hi - Thanks for watching! Yes, there usually is. Sometimes the old cable can simply be pulled through the hole in it (as in this vehicle), but sometimes the gromet has to be cut from around the cable. I recommend that you check the exact procedure with a service/repair manual for the vehicle you are working on if possible.

[@domedomelinson]

I just installed it today. The new cable came with a firewall washer in place on the cable. Easy install. ​@@TheBatteryShop

[@oxkbarr]

Just happened to me, I thought it was gonna cost an 💪🏼🦵 so thanks.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I hope the video helps you with this project.

[@mrxdoan]

Mr pros. Why didn't u tape new cable to old one? Wouldn't that save time?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I don't know if it would save time. Maybe. We just followed the procedure in a service/repair data base.

[@sherrykephart5913]

OkOkOk I'm going to attempt this on my 1991 Chevrolet truck now best video I found TY

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! If you would like to share, let us know how it worked out for you.

[@labuyo001]

I have a 1996 V8 Grand Cherokee , is the Hood lock same as what is shown in your above video? thanks in advance.

[@WrenchinUpwithJimBates]

Probably, but I don't know for sure. I recommend you check with a repair manual or with the folks at an automotive parts store to be sure before you begin. Thanks for watching!

[@LuckyBlueRose]

Thank you for this video. I was checking my battery on my 2014 GMC Sierra 1500 SLT because the truck would not start and when I opened the hood it opened fine, but when I closed it, it would not shut and I really thought I would have to pay someone to fix it.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your experience!

[@beamartinez673]

This video just saved my life & a lot of money paying someone who wanted to charge me $100 lol thank you

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I'm glad the video helped.

[@roddydykes7053]

Love the old guy, hope he’s going well

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Yup, the old guy is still doing OK.

[@luzmortl8209]

What about replacing the handle latch assembly part that broke off? Doesn't that part have to be replaced to? How do you put that back on? Thanks.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! The handle and cable is usually available as an assembly like this one was.

[@luzmortl8209]

@@WrenchinUpwithJimBates Thank you so much for taking the time to respond. I sincerely appreciate your expertise, education and knowledge - and you sharing it with us. You are AMAZING!!!!!!

[@WrenchinUpwithJimBates]

Hi Luz - Glad I could help!

[@hooha1692]

Is it possible to just replace the hard plastic leaver? I had my foot on it not thinking about it because in my 2008 avenger. It's placed perfectly where you would want to put your foot. I put pressure on it to adjust myself and the leaver itself just snapped in half. Everything else seems to be intact still.

[@WrenchinUpwithJimBates]

Hi - It might be. Checking with your local auto parts store to see what is available might be the best idea here. They may have just the levers as a replacement part. I have not seen that myself, but you never know. Thanks for watching!

[@DLynKimmel2016]

or check with a salvage yard! ;)

[@aldee3018]

you can just replace the lever but why would you when it's much more cost effective to just get the complete part and you get to start new completely.

[@tigertruckerman]

very good video,thank you,need to replace Saab cable

[@WrenchinUpwithJimBates]

Hi - Thanks for watching!

[@analiese.s4465]

I grab a pair of pliers or whatever they’re called and tried pulling the cable to pop the hood but it wouldn’t move:( I don’t know what to do now

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! My guess is that the hood release mechanism is stuck from lack of lubrication. I suggest that you check a service/repair manual to see about disassembling the front end stuff to see if you can lubricate the hood release mechanism so you can try again.

[@DandiPoofs]

Will this help if my hood latch won't lock? Or is this just a fix for when it won't open?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! The procedure in this video is for a hood that will not unlock because of a broken cable. When the hood will not lock down, the usual problem is a sized up hood latch. A liberal amount of a penetrating oil (I like PB Blaster) will usually free up the mechanism.

[@MM-sz6ku]

Hi! 1997 Acura TL 3.2. I can't find the cable. Amazon, Rock Auto, Ebay, Parts Geeks, none had my cable. Any suggestions as to where I can find my cable! Thanks for this video btw!

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! You could try the local dealership parts department. If they can’t help, you might just have to try to replace the cable with a universal cable kit that should be available at auto parts stores.

[@sharonlarrocha9095]

The title and the thumbnail need to be corrected. It says "How To Fix A Broken Hood Release *Handle* (which is what I needed), but it's actually a video on how to fix the *cable*.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Not a bad suggestion but the cable and handle are all one piece on vehicles I have experience with. I'll look into this.

[@briankaneiii4234]

What can i do if pulling on exposed cable doesn't pop hood?.. Thanks

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I think you may have to refer to a service/repair manual for the vehicle to see how to dissemble the front end (grill, etc.) to get to the hood release assembly, so you can lubricate, repair or replace it.

[@samsaxton1023]

Is the repair the same for a 2000 Cadillac Deville?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Being retired for a while, I seem to have developed a “rusty thumb” and find that long distance diagnostics is difficult if not impossible. Having said that, I would like to suggest that you refer to a service/repair manual, available at many public libraries and for sale at auto parts stores, for the information you are looking for.

[@robertlee4172]

Great tips.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion!

[@chelsea1062]

So the one on my car is a little bit different. When I go to open the hood of my Subaru Impreza I'm pulling on the latch and the cable still there and everything in the lap pools but the Hood doesn't pop open. Then when I go to pull on the little lamps that's actually hooks onto the car and the hood it's still won't open. It's like it's stuck. Do you have any suggestions for what I should do?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Based on what you have described the release mechanism may be sticking or even damaged. You might try spraying a penetrating oil into the mechanism. I especially recommend that you check with a service/repair manual for your vehicle to see what the troubleshooting and repair procedures are.

[@chelsea1062]

@@WrenchinUpwithJimBates I can't thank you enough. Thank you so much for taking the time.

[@janicegarcia604]

Thank YOOOUUUU Soooo much. You have saved me time and money ..woohooo...👍

[@WrenchinUpwithJimBates]

Hi Janice - Thanks for watching! I'm glad the video helped.

[@ebiedog]

Wow. Pretty easy job! Thanks for sharing!

[@WrenchinUpwithJimBates]

Hi - You're welcome and thanks for watching!

[@mrpoohbearlvr]

Can you by pass this interior hood release lever? Why is it there anyway?? Mine is now loose or slack, it is taking 4-6 pulls to get the hood to pop on my 2006 Aveo. It isn't broken off. It goes through the fender well, not easy access like on this Jeep. It is a big job to replace, got to take off the front left wheel, and the inner fender plastic cover, etc.... Cant it be bypassed, to just pop the hood just from the latch on the hood? It is 14yo, nothing to steal in it, and i have an alarm on it, so if anyone knows this 'lock' isnt working, they must be desperate, to steal an Aveo engine part?!!

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I don't know of any way to bypass the hood release system and honestly I don't recommend that. I think the best thing is to "bite the bullet" and follow the replacement procedure in the service/repair manual for your vehicle - as painful as it will probably be.

[@bpatinom]

Great video, thanks

[@WrenchinUpwithJimBates]

Hi - Thanks for your nice comment. I'm glad you liked the video and I hope it helped. Thanks for watching!

[@xtc-jewelry]

Excellent job, Thank you so much.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I'm glad you like the video.

[@EVERETCHYA]

The bolts that were holding on the hood latch broke in half now i have no way of putting the latch back on... what do i do?

[@WrenchinUpwithJimBates]

Hi - broken hood release mechanism bolts on older vehicles is not uncommon in shops, even when using a liberal supply of PB Blaster or your favorite stuff for loosening rusty nuts and bolts. The fix is fairly easy though. Simply drill out the broken bolts and put new bolts, washers and nuts in the holes to remount the hood latch. You will probably have to make some final adjustments to get the hood to latch securely. Thanks for watching!

[@martinsmythe3414]

Is there no way to put the new handle on the old cable instead of replacing the whole cable??

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Not that I am aware of, but check with the auto parts stores to see if they have anything like that.

[@bubbajones4691]

Can't seem to find a replacement for a 2002 Lincoln Town Car Signature, any help?

[@WrenchinUpwithJimBates]

I would imagine you have checked the automotive parts stores, but you have not checked with a Lincoln dealer's parts department?

[@adikul911]

Is it the same mechanism and procedure for the 2006 Jeep grand cherokee?

[@WrenchinUpwithJimBates]

Yes, according to the O.E. replacement procedure it is almost an identical procedure except that the cable snakes around a little more in the front of the vehicle. Thanks for watching!

[@benjaminmashburn7897]

How would you get the hood open to replace it if the cable itself is broken

[@WrenchinUpwithJimBates]

Hi Benjamin - Depending on the vehicle, there is usually a whole lot of front end disassembly involved to get at the hood latch mechanism. The service manual (the kind used at the dealership) for the vehicle might be of some help. Thanks for watching!

[@RWS73]

How about a hood cable replacement on an 02-08 Ram?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and for your question. If I get the opportunity I'll be glad to, but in the meantime you may want to check out the procedure in a service/repair manual to see if that will guide you through the job.

[@MadDogAce]

Dorman 912-017 Hood Release Cable bought for my 2005 Chevrolet Truck Silverado 1500 2WD 4.3L FI OHV 6cyl and its a couple inches to big what should i do.

[@WrenchinUpwithJimBates]

Hi - If you mean the cable is too long, you may be able to adjust the slack between the hood release and the firewall so it doesn't interfere with anything. If there is another issue or you need more help with this, you can check with the Dorman folks at www.dormanproducts.com/Pages/forms/customer.aspx. Thanks for watching!

[@brians2501]

Im going to have to do this on the weekend with my 2001 Cherokee

[@WrenchinUpwithJimBates]

Hi Brian - Thanks for watching! I hope the video helps with your project!

[@brians2501]

It def helped took about 45 min and it works thanks Jim

[@ya55er4008]

this wire cannot be tightened up like the throttle wire ? I had this problem today

[@WrenchinUpwithJimBates]

None that I have seen, but then again, I certainly haven't seen them all so I'm not sure. That being said, the purpose of this video was to provide a basic idea for replacing the hood release cable when the pull handle breaks off, which is a common problem on some older vehicles. Thanks for watching!

[@akinoriose9910]

Wow, this is my case in Japan. Jeep Japan changes $100 for parts and $300 for labor for my 1998 Grand Cherokee.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I hope the video helps in your situation.

[@beepbeep566]

Is this the same fix for a 2015 jeep renegade?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I have not replaced the hood release cable on the renegade so I don’t know for sure. So I suggest that you check a service/repair manual (that’s what I usually do) to familiarize yourself with the procedure. Auto parts stores and even the public library usually have manuals you can look at.

[@robertbongard1325]

What about the roll of duct tape?

[@carolynmckinney5150]

I have a 92 olds got broken hood latch line. I can't get my hood open up

[@WrenchinUpwithJimBates]

Hi Carolyn - Some of the front end components will probably have to be removed to access the hood latch assembly, then you can open the hood and replace the cable. A service or repair manual for your vehicle will show you how it's done. Thanks for watching!

[@aristeoochoa9781]

I have a 05 range rover. And I took the cable out.cause I was replacing the old one.and the hood close on me by accident...can someone tell me had to open the hood....its a range rover hse.2005

[@NightmareBeatz419]

How do I replace just the button itself

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I suppose that depends on the vehicle. I suggest that you check the procedure in a service/repair manual for your vehicle (available from the vehicle dealership parts department, auto parts stores and some public libraries).

[@PatrickWeaver]

would the principle be the same on a 98 ford explorer?

[@WrenchinUpwithJimBates]

Hi Patrick - It may be. Most of the vehicles I have worked on over the years use a similar method, but check with a service/repair manual to be sure and for the exact procedure because I haven't done this on an Explorer. Thanks for watching!

[@PatrickWeaver]

@@WrenchinUpwithJimBates Thank you!

[@juanvaldez5970]

I have the same car and the cable purchased. How did it go for you?

[@ShaniqaPikes]

My 94 F-250 was easier than the video. Nothing to unbolt up front except the hood latch itself (2 screws). In the cab, pull out a brush plug (get a thumbnail under the cap and pull straight. Make sure it's warm. Old plastic can be brittle. The inside trim part is tucked under a dashboard piece at top and the rubber threshold strip at the bottom. Remove the front three screws on the rubber and lift. The inside trim piece can move forward at the bottom end, and you don't even need to loosen the dashboard screw. After that, it's two Phillips screws to remove the whole inside-the-cab handle assembly, and you can pull the cable all; the way out. Tie a piece of parachute cord on the front end of it, and you don't have to memorize the routing. Tie the same piece on the new cable and it gives you a way to pull it through places it would be hard to push.

[@Rohaana5061]

Are all Hood release cables Universal

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! I don't know for sure but I think a vehicle specific cable assembly is available from the dealership's parts department. I think most, if not all, cable assemblies from parts stores are probably universal.

[@Tallygirl2291]

Hi Jim - Used this video to change my sister's hood release cable and ran into two issues. One, now the hood will not close. Could it be that the latch is misaligned? I've lowered the hood and the latch and U seem to line up but latch will not open to accept the U . Second the soft plug insert that closes the pass through for the cable will not seed properly. I can't reach it the engine area because of ignition wires sitting on top of the access point. Any ideas?

[@WrenchinUpwithJimBates]

Hi Darlean - Yes, the hood latch could be misaligned. It's a common situation and the latches are designed to be moved around a bit to get them into alignment. If the plug doesn't seat properly, and it's the right cable for the application, you could try to lubricate it with silicone spray to help wiggle it into place from the passenger side of the firewall. I hope that helps. Thanks for watching!

[@maryj7382]

How do you open the hood of my 1994 Sedan DeVille Cadillac

[@maryj7382]

Okay OK Google show me how to open up a 94 Cadillac Sedan DeVille Hood

[@WrenchinUpwithJimBates]

Hi Mary - I don't have one here to check but you can consult the vehicle's owner's manual. Since you are asking the question here, I'm guessing you don't have the owner's manual and if that's the case a trip to the library to look in a repair manual for your vehicle should help. Thanks for watching!

[@WrenchinUpwithJimBates]

Hi Mary - Did Google help?

[@lestengreen3263]

If any body know how to get in touch with them please let me know

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! You can check with your local auto parts store for information on the products used in this video.

[@becky4321]

Wish it was really that simple. My 2009 Toyota Sienna has a rubber gasket on the inside that I can't get off to pull the wire through and no one online talks about it. Anybody have experience with this??

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Have you checked a service/repair manual for your vehicle? There may be a procedure listed there.

[@williamarmstrong1017]

Problem is hood is closed and cable break.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! If the cable is broken under the hood somewhere I suggest that you refer to a service/repair manual (available from the vehicle's dealership parts department, auto parts stores and some public libraries) for the repair procedure. You will probably have to take a lot of stuff apart to get to the hood latch.

[@lestengreen3263]

Where they located i would love to know do they come out to your establishment i will pay for gas

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Hopefully this video will provide you with enough information for you to determine whether or not you can replace a broken hood release cable in your vehicle. A service/repair manual for the vehicle, available at the dealership and auto parts stores, will be very helpful as well.

[@hectorperez7655]

OMG @ 3:00 attach a pull string to the end of the cable!!

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion! Did that work in your project?

[@hectorperez7655]

@@WrenchinUpwithJimBates It's a company vehicle that I just got assigned so I will try to do the repairing on my own without getting in trouble, I do pull cables for living so every time that I see someone pulling a cable without living a pull string behind!! In my case is just the handle that needs to be repaired, I hope. You guys made it looks very easy so I will give it a try.

[@WrenchinUpwithJimBates]

Hi Hector - Thanks for sharing your experience. We hope your project turns out well.

[@stevenmorris2293]

Who’s headbanging while watching this 😅

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion!

[@laragreene8328]

Theres got to be a easier way of repairing a broken release handle than to replace the whole cable. If not I'll just keep using my pliers for the hood release 😁

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion, and yup, pliers work just fine too.

[@pleasedonthurtmysoul2309]

Okay y’all skipped about two important parts, removing the cable from the latch and my car has a metal plate covering the top corner

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! The cable is being removed from the latch at 2:08. There was no metal plate on this vehicle, so I suggest that you refer to a service/repair manual for the vehicle to get that information.

[@samfish90212]

I deliberately break things so I can fix them all the time!

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your rather interesting past time!

[@Ron-d2s]

TY.... this is the exact procedure I needed to see.... wrong make, wrong model, wrong mechanism..........................

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your experience!

[@dimplesp4046]

My Audi A4 ‘03 brought me here. 🙄You have to be the Hulk to even get the broken latch to move

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and for your interesting comment! I hope the video helped in some way.

[@garthreid7114]

Considering how long it has been since cars have been in prduction, these minor problems should not exist. The manufacturer should pay for any repairs of catches, cables and fundamental features that break due to their failure to refine and improve the standards.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion! I'm sure others will agree.

[@jameshenderson7607]

Yeah, and watch the price of vehicles skyrocket AND their replacement parts due to wear and tear. "Tire shops should replace tires for free because the technology of tires has not progressed that much since tires for vehicles were invented". What a profoundly idiotic thought.

[@annam8162]

Wow looks super easy! Dealer wants to charge me over 800$

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your experience!

[@greenglass2]

my 92 sunbird hood cable broke at the latch , I'll drill a hole in the handle and use a bike cable.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and for your comment! Let us know how it works out.

[@TonyZ96]

2017??

[@WrenchinUpwithJimBates]

Hi - The video shows the general procedure for most vehicles with this type of hood latch but you need to check a service or repair manual for your 2017 for the exact procedure. Thanks for watching!

[@priscillasutton4898]

If you would have lubricated the hood latch , you wouldn't be replacing the cable.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion!

[@marks3478]

pulling the cable doesn't release my hood!

[@WrenchinUpwithJimBates]

And...............?

[@marks3478]

Jim Bates, I was trying to explain that when I pulled the cable with pliers, my hood latch still wouldn't release. I ended up getting a helper pull on the cable and I tugged on the hood until it released. It was the hood latch that was sticking. I applied some lube and it works fine now.

[@WrenchinUpwithJimBates]

Hi Mark - Thanks for sharing. I think your experience will help others who might have the same problem. Thanks for watching!

[@donna8826]

@@marks3478 if you can get the hood up where do you put the lube, I have a 2003 Toyota Sienna

[@marks3478]

@@donna8826 , On the release mechanism under the hood. For me part of the problem is that the cable has stretched as well.

[@dre04mach]

You mean you don't take the latch out and replace it with hood pins like the previous idiot that owned my car?

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! Um, yeah. As a side note, I've seen cars with tiny pad locks in the hood pins too.

[@OverlandTT]

Easy - no... try that on a Porsche Cayenne lol

[@WrenchinUpwithJimBates]

Hi - Yup, some are definitely easier than others. Thanks for watching!

[@OverlandTT]

It's a great video and I've figured what I need to do and this was a good basis to look at my replacement. Thank you Jim. I'll be sure to do a little how2 video just incase.

[@WrenchinUpwithJimBates]

You are welcome! If you want, you can post your video here too when you are ready as it will probably be helpful to other folks with the Cayenne. Here's a link to a battery replacement video I did for the Cayenne that you may be interested in. kzbin.info/www/bejne/maS0enaBrpqCgLM

[@thehuntx]

That latch hasn't see WD 40 in seven Sundays.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! It sure hasn't!!

[@BeaterCollector]

That jeep needs new headlights

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your observation!

[@marybrown9542]

Ford Canada is charging me $700.00 dollars to do this on my 2013 Escape. They say its 2 hours of labour cost....

[@WrenchinUpwithJimBates]

Hi Mary - Wow! Since a replacement cable with handle costs about $40.00 at the parts store, $330.00 an hour for labor does seem high indeed. But then again, I'm no expert. Just sayin............ Thanks for watching!

[@marybrown9542]

Hi thanks for responding so fast. I do live in Toronto , Canada and things are a little more expensive here. But I do believe the dealership is charging way to much. They say it 2 hours to fix the leaver and cable. I just call a friend's mechanic and he quoted me $160.00 for parts and labour to fix it. So I guess, I am gonna have to go with a plan and get them to lower the price.

[@EarthtonesCymbals]

Came here looking for Cable Guy. Very disappointed.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching! He was busy so you got us instead - sorry.

[@5deeplogic676]

PLEASE ... LOSE THE OBNXIOUS MUSIC! Couldn't stand to listen to the entire videos. I will look elsewhere. Think about it this way. *No music will likely offend ... no one!* Any music, will likely offend someone.

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion! I'm working on this.

[@robbuchanan3978]

Dump the music

[@WrenchinUpwithJimBates]

Hi - Thanks for watching and sharing your opinion! I'm working on that.