DAY 597 in the Shop, Fixing Cars

  Рет қаралды 1,579

Jimmy, Making it work

Jimmy, Making it work

Күн бұрын

Пікірлер: 61
@bryanalbright3019
@bryanalbright3019 Ай бұрын
Get your some old school fuel filters. The round clear can type. 1/4 , 5/15 , and 3/8s. Plumb the clear side to charcoal canister. You will be able to see what you need to see. The filter will save the purge valve from charcoal. 😊
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
That is a good idea! As long as the car has some rubber in the system. I suppose a fuel hose and clamps would work in it also.
@mlieser1230
@mlieser1230 Ай бұрын
I recently did the intake manifold, valley pan and valve cover gaskets on our 2000 GMC. What a mess! It was covered in 24 years of grime. A lot of scraping, a washing in diesel/mineral spirits and rinsing with brake cleaner. Of course when removing the passenger valve cover the plastic heater hose connector broke. Now we are having lean codes for both banks. I should have went with Felpro intake gaskets.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
I like the metal gaskets! 😎
@Paolo0902
@Paolo0902 Ай бұрын
On that Toyota is probably showing in KM
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
That’s what I’m thinking. My cousin Nick says it’s a XTool glitch.
@philh9238
@philh9238 Ай бұрын
When you think you’re going to hang it up and retire? Or you want to go as long as you can
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
I’ll probably work until my body says we’re done. Arthritis will likely be the deciding factor.
@NickMyers1
@NickMyers1 Ай бұрын
Hey Jimmy. That mileage on the Toyota. Guess what XTool forgot to configure properly - metric versus US! That 182,xxx on the dash is equal to the number displayed on the tool - but the number on the tool is kilometers. Enjoy the cooler weather on the job. Gotta be nice not having it 172737.2% humidity and similar ambient temp!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Oh man, another X tool glitch! Thanks Nick, hope all is well!
@NickMyers1
@NickMyers1 Ай бұрын
@@JimmyMakingitwork Ha. More to correct on their end. All well here! Hope the same for you!
@kendog53
@kendog53 Ай бұрын
Thanks jimmy
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
You’re welcome!
@SleepysAutomotive
@SleepysAutomotive Ай бұрын
Brake fluid should always look like swamp water!!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
lol
@philh9238
@philh9238 Ай бұрын
Also dealing with a 01 s10 4.3 liter has had all ignition and fuel parts thrown at it. Dealer parts. Has a number 5 misfire only at higher rpm like getting on the highway. I put a vacuum gauge on it and when it misses the needle flutters very quickly between 12-15 inches of vacuum. I’m thinking maybe a weak valve spring
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Yeah, sounds like a valve spring or cam lobe that’s begun wearing down.
@ashg129
@ashg129 Ай бұрын
Love the channel. Keep up the good content. Would love to be considered for the giveaway
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Awesome, thank you!
@dangleebols
@dangleebols Ай бұрын
Brilliant as always 😊
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thank you!
@daveunbranded
@daveunbranded Ай бұрын
39:40 miles or km?
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Oh man, I think miles, but I didn’t really notice. :(
@warrantyvoid100
@warrantyvoid100 Ай бұрын
Thanks for the video Jimmy!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Appreciate the support!
@ToddMcDonald-zh4ym
@ToddMcDonald-zh4ym Ай бұрын
The cops arrested some guy for setting those fires in New Jersey and New York.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Oh man, if someone did that on purpose, no sympathy for their azz. Grrrrr
@Scott_69HemiDart
@Scott_69HemiDart Ай бұрын
Another Great day in the shop!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thank you my friend!
@kc9146
@kc9146 Ай бұрын
Why cover up that oil change sticker??? 🧐
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Not sure actually, just an impulse. Been getting heat about what I show in videos lately. Gunshy.
@Stonehands75
@Stonehands75 Ай бұрын
Keep rowing 🚣 see you in the next one But Jimmy making it work is awesome
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Much appreciated Tim!
@kathysexton4554
@kathysexton4554 Ай бұрын
Great video Jimmy, thanks!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Glad you liked it! :)
@javierosorio5169
@javierosorio5169 Ай бұрын
I use to work at a shop at the parts department, and when the mechanics personnel cars went down , they would sent it to someone else to work on it. Just like you said , they work on cars all day , the last thing they want to work on is their own cars.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Very true! I didn’t mind as much when I was younger and my kids were little, focused on the money. But now, need to down time, it’s valuable!
@randy5411
@randy5411 Ай бұрын
The shop could buy the loud colored Porsche, weld it to a support at billboard height. Put your shop name on it so that all of the traffic eyeballs will be drawn to it every time they drive by (or should I say, "speed by"). Business will boom, and it will become an iconic part of Kissimmee. No charge for the advertising tip.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
lol, I’ll run it by the owner!
@puremayhemFTW
@puremayhemFTW Ай бұрын
11:26 I enjoy the cursing it actually makes it a real day in the shop! please add more cursing in the future lol
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
lol, I edit out a few every video, so many people watch with their kids nearby. Working with loud people in a noisy shop doesn’t help. ;)
@michiganporter
@michiganporter Ай бұрын
Man I could use a new scan tool that has bidirectional functions...also a tool for tires ....gotta spend that cheddar!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Man it makes a huge difference when we have to get something done for sure!
@oldbiker9739
@oldbiker9739 Ай бұрын
old biker says Jimmy did it right on the valve cover reseal .
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thanks very much OB! That is what matters!
@chromasonictv6369
@chromasonictv6369 Ай бұрын
another great video
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thanks for the visit!
@tom535
@tom535 Ай бұрын
Hey good morning Jimmy.. Hey Jimmy don't worry about me,, LOL LOL LOL.. I'm going to be alright as usual I've been crying to the wife about the camera Scope... LOL saying i never win anything.. LOL BUT don't worry your still my best go to i watch everyone of your videos from Beginning to end.. I stsnd by what I said if i was to be a member i would Be a member to you and ford boss me.. he has simmereddown a whole lot.. now that I'm done crying.. LOL i will watch your video.. FROM TOM..
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
You got this! Haha Thanks Tom!
@jamesu
@jamesu Ай бұрын
Everyone needs a car. Very few can or will even check their own oil.(sad). If they had brought the car to you for a pre purchase inspection, they would be working on a level playing field.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thanks James, when money is tight it’s even more important to follow thru on Pre-inspections!
@alexk7286
@alexk7286 Ай бұрын
182 thousand, no way, jimmy, not when you can buy an 18 or 19 corolla for reasonable money and low miles. I bought 18 new cars in my life (age 50 ) and 4 used when I was poor . people today think they can buy good cars for new motorcycle 🏍 prices. if thats the case, people get a motorcycle license endorsement and a Japanese motorcycle for reliability. I can tell you basic motorcycle coverage in fl a year is less than 165 bucks on my own motorcycle ( just liability) but stop thinking 7 to 10 grand with 4 wheels is getting you a good car! in less you personally know the mantiance history!
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Agree 100% Alex! Only problem here is aggressive drivers are EVERYWHERE! I get tailgated and flipped off for going only 10 over the speed limit. lol
@lloydweems6237
@lloydweems6237 Ай бұрын
I like to have at least one of my cars that I bought new. Never know how used ones were driven or maintained.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Yeah, I think for those who keep cars a long time, starting new is the best way to do it.
@giggiddy
@giggiddy 27 күн бұрын
Folks that buy those clapped out cars from the buy here pay here do so because theyve likely made a bunch of consistently poor decisions in life, and have no choice but to buy at those places because they have no available cash. Thats the common denominator. Thats also why you see those recently purchased, high mileage luxury vehicles with that tell- tale high gloss interior shine that screams buy here pay here. They are more interested in trying to impress their friends who have less than they do, instead of driving something practical. But at least they bought a toyota. With that brand they will have a fighting chance.
@JimmyMakingitwork
@JimmyMakingitwork 27 күн бұрын
Yeah very true!
@philh9238
@philh9238 Ай бұрын
New intro hits hard. What song is it from
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Thanks! It's from a KZbin creators playlist called In the Shadows, from Ethan Meixsall, I believe. Might not be spelled right. :)
@ToddMcDonald-zh4ym
@ToddMcDonald-zh4ym Ай бұрын
With no records of services, even then, most used cars are sketchy. Most people don't sell reliable cars.
@JimmyMakingitwork
@JimmyMakingitwork Ай бұрын
Very true! Reliable cars get traded in at dealers by people who like driving newer cars. The ones being sold are usually used up. But there are some out there if someone patient…VERY patient.
How To: Prius hard brake pedal, Corolla LOF, Q7 Misfire. Shop DAY 618
41:11
Jimmy, Making it work
Рет қаралды 897
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
The SHOCKING State of This Rental Excavator! 😩| Repair BENT and BROKEN Parts 🛠
53:21
Cutting Edge Engineering Australia
Рет қаралды 684 М.
Junkyard Ford F250! Was this Insurance Fraud?
43:52
Rainman Ray's Repairs
Рет қаралды 315 М.
Big Repairs Needed On The New Truck Before Putting It To Work!
54:45
MERCEDES EXPERTE SPILLS THE TRUTH About My $3000 V12 S-Class!
58:27
Maeximiliano
Рет қаралды 428 М.
Master Honda Tech with a MONSTER MATCO Setup
1:35:45
Tool Box Tours
Рет қаралды 160 М.
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН