SSR PULLS, AVALANCHE SRS, 350Z RUNS, 300 CRASHED. SHOP DAY 604 FIXING CARS N TRUCKS

[@warrantyvoid100]

Thanks for the video Jimmy!

[@JimmyMakingitwork]

Any time my friend!

[@kathysexton4554]

No Duncan AND 47 degrees! OH NO! 22 degrees this morning in southern WV. Thanks for the video and we will take what we can get this week in videos. Have a great day!

[@JimmyMakingitwork]

Brrrrr, haha, thanks Kathy!

[@discipline3318]

53 minutes? Oh boy best believe I’m getting my snacks ready

[@JimmyMakingitwork]

Haha, that is awesome, thanks for the support!

[@tonyshirley5674]

Jimmy, so many sirens thought they were coming to take you away! LOL!

[@JimmyMakingitwork]

Haha to the funny farm where life is wonderful all of the time…

[@ToddMcDonald-zh4ym]

It's 10 degrees, and we got slammed with 3 ft of snow this weekend. I'm hitting the snowmobile trails today😊

[@JimmyMakingitwork]

That is one good thing about all that snow! Enjoy!

[@ChadMcgowen]

I guess they realized tires don't make profit

[@JimmyMakingitwork]

Seems like they plan to focus on selling MORE tires. :(

[@Savageitright]

Good morning, Jimmy I am back lots of past videos to watch.

[@JimmyMakingitwork]

Welcome back! Hope all is well!

[@MitchGaar]

Have a good day Jimmy!

[@JimmyMakingitwork]

You also Mitch!

[@Scott_69HemiDart]

Good morning Jimmy!

[@JimmyMakingitwork]

Morning! 🤓

[@michaeldeegan1654]

had to do front wheel bearings on a 2014 honda civic for my son. the wheel speed sensors would not come out so had to leave them in the knuckle while i removed the knuckle from the car pounded out hub then got snap ring off then hammered the bearing out pressed new bearing in install snap ring then pressed hub back in after got internet race off spindle. no damage to sensor. here in Wisconsin the sensors never come out.

[@JimmyMakingitwork]

Oh man, glad you got it sorted!

[@michaeldeegan1654]

@@JimmyMakingitworkkinda learned my lesson never buy from amazon cheap parts have to do again since they are still noisy this time got quantity from rockauto

[@Scott_69HemiDart]

Another Great day in the shop!!

[@JimmyMakingitwork]

Awesome, thanks Scott!

[@sm400]

Watching this from Spain.....bizarrely im writing in English....and even more bizarrely ive had a sump off a Chevrolet Tahoe today.....never saw one in Uk ever...

[@JimmyMakingitwork]

Haha that is awesome, thanks for watching and leaving a comment!

[@johnn2557]

Wow I’m surprised that you only pass one Dunkn on the way to work! In my 6 mile commute I pass 3 Dunkn’s and there is a fourth just pass our shop! 😂😊☕️🍩🍩☕️

[@JimmyMakingitwork]

That's awesome! Haha

[@gon123able]

it is nice to see a mechanic who doesn't only tighten/untighten bolts and nuts, but also tries to find the source of the problem in the electrical system. your boss should be proud of you)

[@JimmyMakingitwork]

Thanks very much!

[@tombeilman5579]

Don’t think we have a drive thru Dunkin’ donuts but we have a Dutch bros drive thru that has been crazy busy. I think they are west coast. Seems like a mobile mechanic would be the way to go but you have terrible working conditions and no lift

[@JimmyMakingitwork]

Yeah, thought about that a while back. A couple Of my friends do it, but they are younger.

[@oldbiker9739]

Jimmy making it work with out coffee, that's amazing ,but a bent out of shape Chrysler doesn't help either

[@JimmyMakingitwork]

Haha, rowing my butt off over here OB!

[@mikem8563]

Krispy Kreme does it for me

[@JimmyMakingitwork]

Sip N Dip is the spot around CFL. But we have a Crispy Crème too. Haven’t tried their coffee yet.

[@giggiddy]

At what point does piecing back together a dumpster fire like that Chrysler become a liability, or at least rabbit hole that you now own forever?

[@JimmyMakingitwork]

Man I hope not. I think we got it sorted out pretty well.

[@dangleebols]

First for a chicken dinner 😂😂😂😂

[@JimmyMakingitwork]

Hahaha, always on the podium and today a Winna!

[@ChadMcgowen]

Tire labor went the wrong direction wtf??

[@JimmyMakingitwork]

Yeah, we are all a little surprised. Trying to compete with WalMart I suppose. lol

[@lloydweems6237]

That Chrysler 300 just makes you disgusted at such poor workmanship.

[@giggiddy]

Its not workmanship. Its straight ghetto bandaid. Some turd traded someone a bag of weed to glue it together. But they wouldn't do that if they couldn't dump it on someone. The hood rat that bought that pos is happy to drive it around the hood cuz they think look edgy. And thats all that matters anymore in the states.

[@JimmyMakingitwork]

Man it’s a shame that people do this kind of thing. Not cutting a corner here or there, the entire thing is one big corner.

[@randy5411]

There were a lot of sirens in this video. Were they responding to the trauma that the shop has suffered from looking at that hideous colored Porsche?

[@JimmyMakingitwork]

Rofl, busy day for emergency services. The driving in this town is atrocious and it gets worse by the month. Now they are adding thousands and thousands of apartments all over town, so it will only get worse.

[@kansaswolf865]

Florida is packed out. I remember when Lake City was a nice small Town. Now, it's a madhouse.​@@JimmyMakingitwork

[@jjg7696]

Those bent frame rails are cringe. Hopefully if they try to sell it the doors hitting the fenders set off a red light.

[@giggiddy]

That car was just purchased- beat up and all. The caliber of person that buys a turd like that doesn't care about door gaps. Where that car will be driven and parked. This car will be one of the better ones. Lol

[@JimmyMakingitwork]

Man it is rough. Always find a way to make it work though!

[@jjg7696]

@@JimmyMakingitwork Of course. Your making it better. I live near the border and alot of auction cars are sent south for a new lease in life. Just that had a friend that bought a specimen like that chrysler and before long the paint literally fell off and the tire wear indicated a very bent frame.

[@jjg7696]

@@giggiddy Lol. I hear ya. Can always grind some of the fender so that it doesn't hit as a solution.

[@lrdisco2005]

I hate plastic almost as much as i hate MDF. But i am out of date.

[@JimmyMakingitwork]

Haha I can relate my friend!

[@bryanalbright3019]

Ask people about rust from Melbourne, Merritt Island or Coco Beach area 🎉

[@JimmyMakingitwork]

Very true! Living on the water is hard on everything, even homes!

[@mikenonameneeded3485]

Dunkin’ needs to setup in a temp trailer while the remodel is going on.

[@JimmyMakingitwork]

That would be awesome!

[@mikenonameneeded3485]

You and Rob start a shop replacing Kia and Hyundai engines while you wait! Lol. You could do 2 a day!

[@JimmyMakingitwork]

Haha, very true, I bet we could, maybe three with a little overtime!

[@SleepysAutomotive]

Enjoy watching competency and applied skill. Buy a 10mm Snapon wrench for $$$ and immediately lose it!! Quick turn around is the driving force for repair and body shop instead of a job well done. Fix it like your Grandma drives it. Gotta take care of Grandma!!

[@JimmyMakingitwork]

Great point!

[@samrugtiv3839]

Looks like that car worked you over big Jimmy I hope they soak him real good.see you tomorrow. Sam

[@JimmyMakingitwork]

Haha, we got it sorted Sam, thanks for looking out!

[@jamesu]

Nice video today. Thanks Jimmy. PS. I received my stickers this weekend! Thank you

[@JimmyMakingitwork]

Enjoy! Thanks for the support!

[@mikenonameneeded3485]

Just another comment to help the algorithm!

[@JimmyMakingitwork]

Much appreciated!

[@tom535]

Now you know how i feel about the camera.. i did not win.. LOL LOL LOL.. hey listen Jimmy your still the best!! I watch everyone of your videos.. hope you and your family had a great Thanksgiving.. i do not aways have time to comment BUT I watch all your videos.. FROM TOM..

[@JimmyMakingitwork]

Actually Tom, that would be incorrect. You did win! Check that video for the pinned comment and send me your address here: [e-mail] Congratulations!

[@Brian-nf6bt]

Busy day Jimmy well done great video

[@JimmyMakingitwork]

Thanks 👍 Brian!

[@mikenonameneeded3485]

Torqued to 102!

[@JimmyMakingitwork]

Thank you Mike!

[@Stonehands75]

Awesome as always Keep them coming 😢 why would you get told you make less money for doing tires?? Keep rowing

[@JimmyMakingitwork]

Good question! Haha. I see their goal, to make more money and sell even more tires by lowering the total price. But it not motivating to hear, “we are going to make you busier for the same or even less money.” :/

[@mikenonameneeded3485]

Well, one more comment for good measure! Haha

[@JimmyMakingitwork]

Boom! Haha

[@tom535]

Hey Jimmy I've been joking about the camera.. i reread what I said I've been joking.. that's why i hit it with LOL.. I will stop joking about it.. FROM TOM

[@JimmyMakingitwork]

Haha, thanks Tom!