JK Pockets - Get Rid of that Sagging Sack! Jeep Wrangler JK JKU Door Storage

🔔 Please CLICK THE BELL if you want to see my videos! 🔔
If you've got that sagging sack... you are going to want to take a look at these! www.slickrockg...
JK Pockets™ are the first "real" door pockets for the 2011-2018 Jeep Wrangler JK!
Like many JK owners we found the factory door netting to not be very useful, and even worse if anything with any weight is put into the netting it stretches out. Depending on where you live, the age of your JK, and how often you run with the top off you also find that the netting starts to deteriorate and fall apart. Many owners just end up not using the door nets at all, and some resort to just cutting it out because it ends up looking terrible.
We searched every nook and cranny for a solution and the only option we found was a metal molle panel. We didn't like the look of that so we set out on a mission - determined to make something useful, stylish, and easy to install.
After many months of prototyping, testing, and refining the design, we finally accomplished what we set out to do!
JK Pockets™ are HANDMADE in southern California.
General Features
-Made from aircraft-grade, fire retardant plastic
-Excellent impact strength, abrasion resistance, rigidity, and chemical resistance
-Easy to install - takes an average of 5 minutes per piece
-Pressure fit - no rattles and requires no tape
-Optimized depth - no interference with other factory features and unobtrusive to the occupants
-Stepped feature across the top edge for increased rigidity
Lower Dash Pocket Features
-Works with both automatic and manual transmissions
-Perfect cell phone holder - will fit two phones side-by-side
Door Pocket Features
-Optimized depth to minimize catching foot during vehicle entry and exit, and also to minimize the chance of interfering with occupants leg (note: the passenger front area is narrower than the driver side so the pocket may slightly touch the occupant's leg)
-45 degree angle on the forward edge - this offers better foot deflection in the event of impact during vehicle exit
-25 degree bottom and rear angles - again offers foot deflection when entering the vehicle

[@RVHabit]

Great idea. Price is way too high for a piece of plastic.

[@mlke2900]

Oh my gosh I was a culprit of a flapping window on both window sides for many months, after watching your video no more flapping. Thanks

[@twoallame]

I got these over a year ago. Work great, pricey yes, but value is in what one feels it is. Lost to many maps and other things due to the sagging sack. Got the whole set for my JKU.

[@geoffsmith4714]

These JK pockets are so slick! The fact that you don’t take the door apart to install is the best part!! What the hell was jeep thinking with those silly net sacks?? These pockets Rock!!! Thank you SlickRock!!!!!!!!!!!

[@markpenfield4435]

My wife got me a set for my birthday I think that the QUALITY is outstanding and they are Made in the U.S.A !!!

[@anthonygallo3576]

I am a fan of alot of stuff u do. I have my yasue 7900 in my jeep and it was your idea! So when i needed pockets i thiught i woukd once again follow your lead. Thr slickrock is sold out. I reached out to them and for what they are charging they shoukd have emailed me back. .so i went on amazon and bought some chineese pockets for a hell of alot less. !!!!! Work just as good . Thanks for another great video

[@furiouhuzzah]

I love that I upgraded my 2006 to a 2016 and now here I am having to do this project…

[@ToddKirst]

Thank You for posting this video! I have been looking to replace my sagging sacks for sometime now. I went ahead and bought the Complete Set even though it was a bit pricey.

[@ToddKirst]

Awesome Upgrade! Just completed this upgrade today and your Video was extremely helpful!

[@ToddKirst]

These also are perfect for storing the Door Wiring Harness when removing your Doors!

[@GaryDrumm]

As I’ve gotten older I have noticed that the sack is sagging more and more. I asked Dr. CPO and it looks like replacing my sagging sack is right for me.

[@garybaum8293]

There are cheaper options but these get in the way of where you would normally keep your left leg on the drivers side. You are also very likely to keep knocking them off when getting out.

[@dexrose6560]

Don’t?

[@yj6009]

I have the black ones in my 2 door, great replacement for sagging netting, and its cheaper than replacing the netting itself.

[@o3djeeps]

They are great!

[@someguy9321]

I've been using fresh balls. It helps me a lot. Oh wait we're talking about Jeeps

[@whisps1]

Great ideal but $160 seems a little steep!

[@o3djeeps]

Yeah... that's the problem with companies developing and manufacturing products like this... it costs a lot of money to manufacture and get a product off the ground. That's pretty much why all the actual inventive and creative products are so expensive. Sadly, it won't be long before some overseas manufacturer steals the idea and offers them at a fraction of the cost. In the meantime...hopefully we can support the inventor that's having this molded here in the US!

[@marksartain5772]

160?? I stand corrected, this product isn’t cheap. Just a waste of money

[@apexpredator_jku]

o3djeeps [ OVERCLOCK3D Jeeps ] can’t win. If it’s made overseas, people clamor about Made In China junk, no quality control etc...buy American but when someone manufactures something Made In the USA they cry that it’s too expensive.

[@Deanzphx]

The market will balance overtime. Supply v demand. If the demand is low, price will naturally drop as supply collects dust.

[@Digitaldreamer7]

@@o3djeeps I just scanned one into opencad, adjusted the minor flaws from the scan, added some extra heft to the tabs to keep them from breaking off... And 3D printed a set for my jeep. Cost me about 4 hours of time and $10 in ABS filament

[@ismaelcarrillo3956]

And now we get to hear more rattling noise down the road.

[@Bignene628]

CANT WAIT I GET MINE TOMORROW. I MODIFIED LED STRIPS IN THEM

[@o3djeeps]

Bignene628 whatt!?!?!?? I need to see that!! Sounds awesome!

[@SeptemberColl]

OEM replacements are way more than these. Only to have them sag again. For the money you are getting a great value replacement. I just received these in solid black. The only thing that I can think of that would be better is that someone development a GOOD net pocket that won’t break down & stretch out and sell it to Chrysler! Or sell them as aftermarket.

[@warrenpercell297]

Somebody beat me to it. I was wanting to make something similar out of Kydex to carry pistol mags in.

[@051biohaz]

Great review, but the product is very much overpriced for what it is.

[@o3djeeps]

How much can you have these molded for? :-)

[@TheRockinDonkey]

@@o3djeeps They're mass-produced. And look flimsy as hell. It's overpriced.

[@jfloydsea]

@@TheRockinDonkey I've bought the cheap amazon knock-offs.. They either don't fit at all, or pop out if you look at them wrong. I'm ordering these - hoping they are higher quality.

[@jfloydsea]

These are way better. They actually fit, and aren’t cheap and flimsy like the Amazon ones.

[@jonnyrebb]

My 2008 came stock with solid pockets.

[@comfortzoneinvader961]

Jon Weddle same

[@tlover94]

It's the saggy sack delete kit

[@NYC-WRX]

I don’t sag yet, but I like these, they look so much better then the ugly nets.

[@taktakmo3556]

Awesome idea. I hope they get black soon as I have a Blacked out JKU. Will get this in black...

[@seanshedlarski]

Taktakmo They have them in black now. They are on the website.

[@o3djeeps]

Yep! They have them now!

[@myloopooping]

You had me at sagging sacks!

[@johnscott303]

Why not just overlap the sack on it's self and zip tie it back to a regular size

[@jab62262]

Looks like something rc will come out with later on for about 20 a piece

[@김상휘-r8r]

제 랭글러 JK도 운전석 뒷쪽에서 달그닥 거리는 소리가 나는데 저 곳을 살펴봐야 겠습니다. 감사합니다.ㅎㅎ

[@kb-ym2mu]

Why not keep the back covers that are in the pocket on the hole it's supposed to cover?🤷‍♂️

[@territrevino4079]

These are brilliant, I just ordered them ✌

[@jessiereginaldo4983]

Perfect upgrade...love it

[@ismaelcarrillo3956]

I think those nets make the Wrangler stand apart from the Cherokee.

[@kinetikk9125]

Cool product but the price is more than I would ever consider. My sack doesn't clog the drain when cleaning is necessary yet. If the company configured the new version to hold a beverage of choice it may enhance my thoughts of removing my existing sack and upgrading to the new rigid version. Until then I will wear out my sack proudly! :) Just my two cents.

[@aacar4095]

Wish they still sold these...link doesn't work.

[@sdericmonty]

Oh hey!

[@fiftyshadesofurban]

I wonder if these will work with the JL.. All of the options I see for these things seem to be similar like this doesn't feel like it's so much made for the JK as it just snaps behind the existing trim, and JL seems to have the same trim. After installing these if it works well I think it'd be good to use glue to permanently glue them because I have read that you can snap these off easy if you bump into them.

[@paddyian]

The fact that these nets have been trash for as many years as they have, and that jeep hasn't either come up with a better system, or at the very least made it so you can just pop that trim off and replace the net is insane to me.

[@atlskyline1]

Please make one for the JL!

[@shekharmoona544]

I barely used them and they both sagged.

[@deweybostick363]

Man, thats a cool product, but it’s pretty expensive for just a few small molded plastic parts. If the price comes down, I’d definitely be a buyer.

[@o3djeeps]

Yeah... that's the problem with companies developing and manufacturing products like this... it costs a lot of money to manufacture and get a product off the ground. That's pretty much why all the actual inventive and creative products are so expensive. Sadly, it won't be long before some overseas manufacturer steals the idea and offers them at a fraction of the cost. In the meantime...hopefully we can support the inventor that's having this molded here in the US!

[@Digitaldreamer7]

Just 3D printed these. Half a roll of abs filament.. cost me around 10 bucks 😂

[@anthonygallo3576]

And that probably what slick rock is doing and has the balls to charge $160

[@suzuki14258]

I wish they made one with a cup holder.

[@whalerlife53]

The only sacks that sag are the ones with “Big Balls”🤣

[@LogicMind99]

Good concept, but I'm looking for something I can keep bottled water in.

[@ammreulrich]

I have never even put shit in those pockets and they still sag.

[@bobhunt3197]

My sack doesn't sag, because I don't have doors for my jeep, so much better.

[@RobertPWills]

Damned annoying. I crushed one of my wiring harness clips because that damned net was hanging below the door frame. Also, those cans of sunscreen (and bug spray), I just put between the door sill and the seat. Even driving at highway speeds, or around town, the cans stay there when I'm driving doorless. If I have to brake really hard, the can will slide up onto the floorboard, but I've never lost one outside my Jeep.

[@mo7.7]

The intro killed me

[@peterodriguez5636]

Are they for the Jeep wrangler 2019

[@jamestaylor-qb9wo]

So...just half-ass it instead of taking the door panel apart? Ok gotcha

[@j3ff3ry18]

james taylor my thought as well. What a dilbert = why not disassemble the net bezel? (because then people would grasp the concept that the door nets are replaceable for about $12 ) . The video person even lost functionality and has to find alternate storage for his coco-butter sunscreen. 🤔

[@dylnfstr]

This video was funny as hell. lol

[@tdz69]

jesus why does everything have to be modded? Who uses those damn pockets anyway?

[@jasonallen6836]

I hate my sagging sack. this mod still wont help that.

[@TexasAllDay]

Will they tap your leg when you close the door? It looks like they may bother your leg a bit

[@rdizzo1313]

For that much the edges need to be rounded or at least polished and not sharp and drop the logo.

[@danielday7033]

Idk, I like my sagging sacks! Part of the nostalgia of owning a jeep. I'll just get new sacks when my sagging sacks start to sag! Cool idea though, just not for the price point.

[@gondolfozarzana1527]

My sagging sacks become manageable in cold weather, however they sag when if it hot outside.

[@jettyandbuoy616]

do these hit your legs like the rest of them on the market?

[@TheWildChild]

or you can get the 07 to 10 jk and you got a huge sack there

[@o3djeeps]

lol

[@jackknutel1083]

My sacks sag, I am embarrassed.

[@o3djeeps]

There's a fix! hahaha

[@DonAntero360]

I will pay $120 for the full set 4 doors, $160 it is too much, I know it is a great idea, there is not a discount price if you buy the full set, each part cost $30, what’s the point of selling full set if you can buy them separately $30/part?. You should make a discount for the full set. I am interested, I will pay $120. Let me know.

[@sjnardozzijr.7850]

looking forward to the JL version in black...could do without the music

[@bradroberts7800]

Sack in the door opening is not good.

[@JdA210]

great review as always but who uses these nets anyway. stupid product but great review as stated before.

[@o3djeeps]

I used them!

[@JdA210]

o3djeeps [ OVERCLOCK3D Jeeps ] you sure did that’s why you had to switch them out.

[@eodjeep2137]

Funniest video yet!! Hahahahaha great opening.

[@o3djeeps]

thanks... I had fun with it!

[@sforde22]

Lol, I love it.

[@Bignene628]

Hey bro are the back the same as the front

[@traubgator]

do they make a finish that actually matches the interior of a jeep? Along with their logo, seems like an eye sore

[@o3djeeps]

Yep.. they now also have a black plastic with the same pattern as the door.

[@kristiancastillothegreenje1395]

Hahahahaha that intro 🤣

[@kaceesavage]

Nice solution. What kind of watch are you wearing sir?

[@o3djeeps]

Thanks. It's a Suunto Traverse Alpha

[@kaceesavage]

o3djeeps [ OVERCLOCK3D Jeeps ] thanks, it looks great

[@woof3598]

I knock them off about evevy time I get in they stick out to far

[@yjf0000]

What do cpo, overclocked and 03djeeps stand for?

[@andrewwilliams4072]

Great video by CPO.....but the product is way too expensive for plastic pockets....I will wait for Chinese copies on Amazon or eBay.....shame as I prefer to reward people that invent....but I can’t accept the rip-off price. But he time I buy them and then pay freight to Australia....they are over $300.....

[@bladerunner8832]

Ain't nothing wrong with my sac 😁

[@danholden2570]

Too much money but the kicker is they need cup holders

[@Bignene628]

When are you making the center video

[@o3djeeps]

Bignene628 that will be up in a couple of days

[@scottshea1614]

I could not stop laughing!

[@TheBeardedJeeper]

Wish I could have these in my jeep but mines a 2010 no net

[@o3djeeps]

Booo!

[@UtahNick71]

I've spent some stupid money on my Jeeps, but there is no way I will buy these.

[@Bignene628]

SaintNick71 why kid

[@o3djeeps]

You're choice. :-)

[@USMCRetiredGuns]

Went to their website, said it was down for maintenance, seems a LOT of Chinese knock offs, not so attractive nor useful exists but here we are buying them! Another USA business gone? Sad!

[@ENERO33]

OHHH HEY.....! 😂🤣

[@valrodrigues4203]

Where did you purchase orange roll bar padding

[@o3djeeps]

This was a test set from Bartact, but I talked to them yesterday and they are NOT going to be manufacturing these. Sorry.

[@sublime90]

luckily my sack isnt sagging yet

[@o3djeeps]

sublime90 give it time... Hahaha

[@sherifx5122]

It's cool, but for the price I'm just going to continue sagging.

[@91Bronco]

The net pockets are cool. Waste of money right here

[@o3djeeps]

Definitely personal taste... I agree the net pockets are cool when they are new...but after they get stretched out, they suck!

[@imagesbylemke7065]

Too funny intro

[@macfeoffensivemacflatearth9887]

that's hilarious! !!

[@KAPWoodworks]

$160 ????? Great idea, but I'll be sackless

[@jakefinke5505]

If you have a sagging sack lasting More than 4 hours please call a doctor

[@o3djeeps]

lol

[@slobama]

$160? No way. these will never sell for that price. Better to put heavy item's elsewhere!

[@ati573]

They should had made them with a curve for drinks

[@JohnsonWilJ]

You can find this on amazon. But a lot of reviewers complain about leg room

[@marksartain5772]

Let’s see how far the hand slides in this thing. Just another cheap gimmick to make a Jeep different.

[@DanWeinel]

I am laughing so hard

[@jamesdrew1168]

Just accept the inevitable. Over time, your sack will sag.

[@leskobrandon538]

I hate it when my sack is sagging

[@ladiezman239]

Walter brought me here

[@o3djeeps]

Awesome! Welcome!

[@steveanderson506]

Looks great. Waaaaay to long of a video.

[@chrisgray7126]

Too funny...lol

[@daviddawkins9669]

looks like a waste of time and money if you can't put nothing in them.

[@macfeoffensivemacflatearth9887]

I got here through information about ed.

[@o3djeeps]

lol... I really want to believe you...

[@daltonhunter5769]

Cool idea but I'll make my own maybe even sell my own but not for fucking 160$

[@o3djeeps]

I'd love to see your version... if you decide to make them, let me know!

[@Slingsomelead]

Looks wrong on a Jeep

[@americanbadass3464]

Way too much money

[@carltarr1674]

All that did was smash my knees. Poor design