Why I Never Made a Video on this MAJOR Steering Upgrade... Hydro Assist!!

[@poopooplatta9575]

Finally, a youtuber here to spread knowledge and not just sell sponsored items.

[@pauljordan756]

Great content - as always. Thanks for sharing your knowledge! Stay healthy and safe.

[@exhaustfumes927]

I couldn't of made this comment without my apple phone and high speed internet connection . Use me code sellout5 for 5 percent off internet and phones 🤣 . That's usually when I'm Like alright I'm out

[@Insideorganics]

What's wrong with selling sponsored products, every KZbinr dreams of getting sponsored by someone who has products that they are using. KZbin can be an actual career if you have lots of subscribers & a sponsor to pay you for what you love doing & not need to have a primary job. Sponsorship is an awesome thing to have. I would not pass up a sponsorship & I doubt you would pass up that opportunity either

[@EVH5150iii]

Please never stop making videos! I’ve learned a lot!

[@Mike_E_44]

EVERY SINGLE TIME I have an issue I search KZbin and your video is exactly what I needed to see!! You think of everything! Thanks for sharing!!

[@muddyWW]

I got 42"s with a PSC ram, a stock gear box I drilled and tapped myself, and I use the stock GM Saginaw power steering pump. No cooler and no reservoir, been running it for 2 years and with not a single hiccup. I didn't find a need for anything else, keep it simple

[@MangoTangoJKU]

Which GM pump? Part number? Bolt in? Thanks!

[@MangoTangoJKU]

Which GM pump? Part number? Bolt in? Thanks!

[@ES-lh1tj]

Love this channel because anyone who does work on their Jeep in crocs and shorts is alright with me! KZbin is about DIY. If I want fluff I can go over to Lite Brite.

[@kg2995]

Lite Bright is the worst. Just a channel about ritch folks running their vehicles into the ground and throwing cash away. I had to ban that BS channel.

[@randypruett5681]

@@kg2995 They don't throw cash away everything is given to them.

[@ScubaDaveGSXR]

K G how about “Mr and Mrs Overlander”? That channel hurts my brain.

[@sbranham86]

Randy Pruett because he puts his wife in the light with tight clothes.....

[@Fix_It_Again_Tony]

​@@sbranham86 I don't think he forces her to do anything. She seems perfectly capable of making her own decisions. As long as they are happy with their channel that's all that matters. No one is required to watch. If anyone is taking advantage it is the companies that see a new form of advertisement. You see the same products everywhere. I am sure some of them are good and there is nothing wrong with receiving a product from a manufacturer and trying it out. The only thing the viewer can ask for is the knowledge that a product has been provided for no cost.

[@jimgavin1799]

Just installed the PSC big bore kit with pump and cooler. Didn’t do the ram because they recommend not flat towing with the ram connected. I tow behind my Motorhome a lot. I’m running 37’s with a Rubicon 44 axle. I love this setup and yes I did get it upgradable to the ram later. Awesome video, I love the way you describe why you do what you do. Keep it up and maybe someday you’ll be as good as Cassie!

[@BetterBiomedChannel]

Thanks for trying the FluidFilm. The smell is Lanolin oil and it reminds me of a horse barn. The smell goes away after a couple weeks but the protection lasts months.

[@tjbleu635]

i see youre a man of culture with those wrenching crocs

[@bibbedvermin8213]

Great video need more stuff like this to watch while on break!

[@josephmcclure6229]

Great job showing us how it works.

[@sethfike211]

I did the psc xd big bore box with the ports. Made a huge difference. Ram is next

[@jeremynichols1326]

Awesome video. Been waiting patiently for a new video

[@johnzillner1596]

Really digging the black sox and crox !!

[@rangethetrail]

very cool. i was wondering about yours - i had a feeling it wasn't a full kit... GREAT info! i've got the PSC Big Bore XD set up i'll be doing a full install video on. haven't seen anyone else really have a video about it!

[@jeffosterhoudt8702]

Just got my PSC ram in two days ago. Will be drilling and tapping my gearbox hopefully this week if time allows.

[@McDaniel4wd]

I’ve been waiting for this video for a while!!!! 👍🏼🤙🏼🤘🏼

[@justemptiedeverypocket9520]

If you’re going to do an LS swap and the big bore box are you going to have to move the box forward 1inch,do it before you put the motor in, yes that is the voice of experience !!!

[@willgodwin674]

you're not our dad we do what we want

[@bigbadjohn2240]

14:25 I'm sure it's somewhere in the 192 previous comments, but if not; do a 180° barrel roll on that bottle so the opening is on top and you'll almost immediately break the pressure on the bottle for smooth, even pouring with no guzzling.

[@tommywainst7171]

It should be called “hydro demand”, because it does what you want!

[@jasonlyijnen84]

Look under the Garage sale on psc website to do a kit on the cheap.

[@jkustockaphobia2421]

Learned lots of good info !! Great job explaining how it drives on road , I’m currently saving up for few big upgrades ; psc hydro assist being one of em thanks to you 👍🏻

[@Fullflex4X4]

heyyyy nice ! not far from there myself. we’re over in south east mass.

[@shanehaws3828]

The 74 GMC 6000 school bus I had was equipped with a hydro assist system and i put a 90s gm truck steering wheel on it and i could palm it parked lock to lock on pavement with 900x20s

[@irieviking]

I love the channel. Very informative !! You guys be safe!!

[@TwinStickCrawlers]

Great video, I actually just picked up a PSC pump for my YJ. I ended up having my box rebuilt and tapped by blue top steering gear. I need to get a ran but I’m swapping to tons eventually. Actually going to be using your videos for my regear. Thanks for putting out these great how to videos!

[@calirninet2195]

Like the video I’m about to get the full package psc kit and I wouldn’t of thought to check the ram before installing to make sure the lines are correct, last thing I would want to do is blow something up, 👍

[@FOUO88]

100% best jeep jk channel on youtube!

[@ronmckenna7903]

yop seem to be the man on this. At some point perhaps you could find a buddy that has a WJ that really needs hydro assist. Routing of the hydro lines in a WJ with the 4.7 V8. Lifted WJ's turning 35-37's are prime examples of DW looking for an excuse to happen on road.

[@accordnc]

One day. We will have this. Thanks for another great video.

[@jasonkus4510]

Love the jeep! Great videos.

[@adamseaman7306]

Greaaaaaaaaat. Now I have to hide a PSC from my wife. 🤷‍♂️ Thanks Ben

[@PaulKaiser42]

Thanks for some cheaper options for hydro assist....the pricing for a full kit (whic I don’t need) is incredible. I’m sure it’s worth every dime if you need it. I’m only turning 37’s 😉

[@poopooplatta9575]

I want to see the TJ unlimited, that will end up being the best out of all of youre jeeps

[@jamescagle5208]

That's on his wife's channel Jeep gear and gadgets.

[@ivanfromtheeast4709]

James Cagle it could be if it was manual but it’s got the auto...

[@Donnut123]

@@ivanfromtheeast4709 It's really a personal preference though, mine's manual but I'm kinda jealous of how easily my buddies with auto crawl over things.

[@Crippler944]

Great video. One of the best upgrades I have done to my JK.

[@johnkovac4436]

at local hose shop they have black cloth like material tough like plastic wrap tougher then plastic and tigher and better fit on hose

[@JeepTJay6]

1:52 Tell me about it! I sprayed that stuff down inside the body cavities where the cage B-pillars attach. Jesus! I couldn't drive with the windows up for over a month.

[@garysumner6032]

Another great video Ben, I suggested last year for you to do an "A" Pillar Dual gauge install (oil and voltage). You said you were looking at doing that but I haven't seen a video on that yet....I'd love to see a video on that, thx

[@garysumner6032]

I guess your too busy to respond....thx anyway

[@monicaowenslester5627]

Love the video,the things that went over and change was very helpful...

[@p.a.f.offroad7551]

Definitely interested in going hydro on my xj. Gotta look up what it'll run me to get my box tapped. Or buy a new one.wonder if I can get into it for cheap lol.

[@adamaldinger6960]

Looks like you could just buy the new end with the wiper seal and it would be good. Minor pitting should be okay. Love the channel!!

[@JKGearandGadgets]

I looked into it. I think the shaft pitting had something to do with killing the seal (Rough surface plus contaminates getting into the seal surface from the pitting. It would be around $80-100 to fix, whereas the new ram was $160. Maybe we can rebuild this one and save it for the LJ? we will see. Thanks for watching Adam!

[@adamaldinger6960]

JK Gear and Gadgets might be worth it and adding it to the LJ!

[@ducks12345678901]

I got a new steering stabilizer yesterday. I'm only running 35s and it was a major difference from stock

[@JS-tb9hu]

Steering stabiliser or a hydraulic ram?

[@JKGearandGadgets]

if above 35s, a hydro assist setup will be better

[@aguywithajeep]

Hoping to make this one of my next upgrades

[@francisdumont3403]

Not in my price range but still informative. Keep em’ coming.

[@Sniperssx]

Thanks, can tell us which best hydro sys for JK, also can you show us a video of Antirock Sway bar installation- I guess the upper tie rod connected with a shift along in gearbox of steering it smees contacting with chase

[@JKGearandGadgets]

I have a video of the Antirock install

[@Se7vinDeadlySins]

I just ordered the big bore kit. Can't wait to get it installed. What turn signals are you running on the JK? They look awesome.

[@guycarroll5366]

Great video but this is the first time noticing it’s a 6spd. Can you talk about 4 wheeling with the 6spd. Would like to hear your take on it. Thinking about get a JLU 6speed. Thank you

[@tkhan1333]

Great video!!! thanks so much for sharing. questions as my off roader is also my daily driver - how does this work on road? On the highway at highway speeds? I prefer a loose steering wheel anyway, does this almost feel like a cadillac ?!

[@Ryan_Tidwell]

Great content. Don't apologize for talking. I'm finally learning some stuff I wanted to know. One question I have is: I recently watched a video where they put in new steering that has an orbital valve and a hydraulic ram but I didn't see a pitman arm or steering box. Is full hydraulic a thing?

[@rileybest6084]

Great video man I love your vids you always do a wonderful job with info it nice to see how much you enjoy teaching us and giving such great info great video keep in coming love your jk

[@Redbeard-1585]

Have you ever seen the tie rod wanting to flop up and down due to the cylinder.

[@Vincent-gt3gx]

You are doing a great job!

[@codyh4406]

Never knew this was a thing. Now I have a solution for when my wife complains about The jeeps being hard to turn.

[@tkhan1333]

Hi! How did this work out?!

[@mickeyreese9906]

Steering Stabiliser versus steerng cylinder? Do you still need both?

[@adamtturk5909]

Cool set up

[@4LowConcepts]

Awesome vid Ben !!!

[@559Raider]

If you put a PSC kit on your gladiator, how will it affect steering while towing?

[@danarteritano1340]

Dude you know you stuff!

[@tradiesupastar4539]

Hey can only the box be installed without the hydraulics on a gladiator jt for better steering feedback given it’s so much beefier than the stock one? Would that actually be better than the original box?

[@steelgatorcrimsontide7403]

I'm very interested in this hydraulic ram stuff you are talking about and what happened in a gladiator axle swap

[@JKGearandGadgets]

Just posting other stuff in between the axle videos!

[@steelgatorcrimsontide7403]

I have been thinking about doing an axle swap on my gladiator

[@timmy16358]

Great video big fan watch all of your videos. I’m in the process of adding assist to a built 44 and I purchased a ram with a 8 inch stroke you mentioned there’s a way to limit internally if you could some how possibly do a video or offer info much appreciated

[@JKGearandGadgets]

You will have to have an aluminum spacer machines down to slide inside the ram, and have it drilled so it can slide down the ram internally

[@JKGearandGadgets]

If you don’t have access to a machine shop, or have a friend who can mill it for you, then it will be cheaper to sell that ram and get the correct length.

[@timmy16358]

JK Gear and Gadgets thanks I have some aluminum tubing left from another project I’ll have to machined to spec I’m guessing it just needs to slide on to ram and be 1and a 1/4 to equal to 6.75

[@kamilpietrzyk2290]

@@timmy16358 Hi Same thing here . Did you ever did that aluminum spacer ? Or did you just ran 8” ? Let me know thanks

[@tomcat5986]

I have a PSC hydro assist setup on my XJ, with the HO pump and reservoir. I really like it but for the total cost I wonder if it's worth it. My turning radius is horrible with my 39's and King Pin 60. That particularly may be my fault in the setup on it, but I'm not 100% convinced. I see you have Antirock on your Jeep. I'm running no sway bars and its road manners are down right dangerous. How is the assist on the road for you?

[@JamesGeer-c8u]

Hey I’ve been building my JK I put 1 tons under it. I have several questions about the Hydro cyst. PS C kit that I bought and how far you’re able to turn the actual axle with the gearbox

[@BigBlockSpence]

I have psc full setup. Works great! My jk handles terrible on-road, tho. Lots of roll. I have 6" lift with a cheap sway bar. How does the anti-rock work? worth the $?

[@DirtRockTeam]

I have anti rocks front and rear on 5.5" of lift on a 2017 JKU. There is a lot more body roll from them. All it really took was minor adjustment in how i drive to over come this. I think they are worth the money for how much i go off-road, no discounting, just air down the tires and go. I would also agree that the PSC system feels terrible on the road. It takes the feedback from the road out of the steering in my opinion. But it does amazing off-road with locked 1 tins & 40s

[@mikehatcher5369]

Very informative. Thanks

[@vikotto]

I’ve got a manual Saginaw gearbox on my ‘65 Gladiator. Can I do hydro assist with my gearbox?

[@digitalgavakie]

Redneck Ram has been great. I feel PSC is overkill and overpriced. Especially if you get the RNR overdrive pulley.

[@ironbearjku2233]

Facts that what I have

[@brownbriansjeep9020]

Explain this redneckram setup i got a jeep on 33 big 26 inch nigga rims and 1 tin tie rod stick steering gearbox cant handle turning anymore , lookn for upgrade

[@kilgoredawg]

Fantastic vid!

[@kenskens69]

nice can you tell me how long are your hydraulic line thanks

[@jaysuttle1269]

ANOTHER GREAT VIDEO 👍 👍

[@JKGearandGadgets]

Thank you! Cheers!

[@RyGuyLifts]

Hey man what flares are you running on the Jk? Love them!

[@davidcooper3957]

I’m thinking I need to do this upgrade I’ve been getting death wobble but only at 70 mph. I have dynatrack pro 60’s on a JKU 2012.

[@chrishennerichs4648]

Where did you get your switch panel on the a pillar?

[@JKGearandGadgets]

kzbin.info/www/bejne/haivfp2DetaAbaM

[@adamfowles1060]

I was just reading about this and was wondering if you can add a filter or is it just for full hydro only? Thanks for the info

[@JKGearandGadgets]

I know that a few companies offer a filter, however i dont really think its needed.

[@adamfowles1060]

@@JKGearandGadgets thank you, how about adding a cooler?

[@ellerybaker2710]

So - the way you describe the steering onroad... sounds like driving an old Buick (ye olde land yacht). If anyone’s ever driven an old Buick and knows what I mean and has also driven a hydro-assisted Jeep, let me know.

[@coreyconnolly897]

What headlights are these? And are they good bright headlights?

[@chrisjones2252]

Nice video. Keep it up.

[@l84jk31]

Did you have to add a bracket on the dana 60? Or is it already there for something?

[@JKGearandGadgets]

You will have to add a bracket or tab on the axle for the ram to attach to. I just mounted my ram on one of trackbar holes on my axle.

[@shanemartinson5006]

great vid.

[@glennski007]

Great video as always. I just picked up a ram on eBay. How do you measure it to know how long the stroke is? Thanks!!

[@JKGearandGadgets]

The measurement is how much chrome shaft is exposed. Pretty much how far it can move in and out

[@jensfam6683]

Hey, Ben, you may have this in a prior video, but I missed it...what lift height do you have on your jk?

[@Shannon-xx8tp]

Hey guys you two do awesome videos did you retire from KZbin

[@tylergruwell12]

Hey Ben, I’m just getting into welding, and I was wondering what kind of welder you used to build your 1-tons for the jk? Brand and process?

[@JKGearandGadgets]

I use a Miller, mig welding with a gas setup. Check out the new harbor freight series welders, the green or orange and a bottle of welding gas will get you far!

[@tylergruwell12]

Was it the miller multimax 215? That’s the one I’ve been looking at for a while. And I’m glad you said mig cause I’m learning to weld rn

[@JKGearandGadgets]

Tyler Gruwell no, this is a pretty older model welder.

[@patrickmccarty8251]

Are crocs the most recommended work shoe to work on jeeps?

[@JKGearandGadgets]

Yes of course

[@tim8425]

Why did you get rid of the barnes aluminum steering/tierod?

[@JKGearandGadgets]

One ton axle swap. Had to make a custom tie rod

[@tim8425]

I notice now. Im getting ready to order the barns steering kit. Keep up the great videos and thanks for sharing the info on ram.

[@thomasirwin9561]

Ben, after breaking your sector shaft on the OEM gearbox which PSC gearbox did you install? Was it their big bore XD2?

[@JKGearandGadgets]

I just got the standard tapped boxed for hydro assist. At the time they didn’t have the big bore boxes.

[@thomasirwin9561]

@@JKGearandGadgets Thank you for your reply, had a great conversation with Eric at Offroad Elements, discussed the pros and cons of the BB XDII-R vs OEM cylinder assist tapped and ported, great talking to someone with hands on experience with both, went with BB XDII-R as the best choice for a build as you and what my ultimate goal is with my build.

[@chrishurley9128]

Hey Ben how are those Barnes high steer arms doing any cracking ?

[@JKGearandGadgets]

Holding up well! No cracking! Just gotta make sure you weld them in correctly

[@chrishurley9128]

@@JKGearandGadgets What about a 03' superduty dana 60 ? I've heard it's a different cast material and you can't weld those what's ur opinion ?

[@87Murdock]

All I wanna know is... why is my mount bracket welded to the toe adj sleeve by previous owner? And do I need an aftermarket bar to fix this issue?

[@JKGearandGadgets]

That setup will work, you just have to adjust the ends individually for alignments

[@danieltichnell400]

Would you recommend something like this for mostly road driving with some mild off roading?

[@JKGearandGadgets]

Depends on your tire size. 37+ yes

[@alexanderdavila4087]

Fun facts about jeeps

[@JamesGeer-c8u]

What is your ram throw?

[@Redbeard-1585]

have you had any issues with single shear on btoh ends vs double shear

[@JKGearandGadgets]

Nope

[@Redbeard-1585]

@@JKGearandGadgets thank you for that. i have had my psc kit for a couple months and kept reading that i really needed to weld tabs on axle and tie rod and not use singl shear bolt enough that i have been nervouse about doing the install myself not being able to weld.

[@cbrown17982010]

How much flack am I gonna get for asking this. . . I have a 2013 jku with 33's and my steering box at 123k just started leaking and the sector shaft is worn out. I'm thinking of getting a new box that's ported for hydro. How do y'all think this setup will be just having the box ported and a ram without the cooler and upgraded pump. FYI the power steering pump in the JKU only has 30-40k miles on it.

[@MegaKillerkyle]

Ecoboost swap 👍🏻🍻

[@jonreed5923]

Another great video psc big bore for $900

[@justemptiedeverypocket9520]

Does your steering return to center by itself,or do you have to help it???

[@JKGearandGadgets]

Depends on what speed I’m doing, with my one tons I’m running close to 7* caster so it usually returns to center

[@justemptiedeverypocket9520]

JK Gear and Gadgets ok thanks

[@digitalgavakie]

Ben did you take out your short air ram?

[@JKGearandGadgets]

Yes, it still worked fine though. I took it off while so a friend could test it on his car (he wanted to know if it would fit). And never put it back on haha

[@2doormoore]

Love the videos but I’ve never heard someone complain about getting dirty so much when working on the jeep

[@beefiestacorn88]

Great video! Is there a hemi swap coming in the future? Lol

[@v8felon]

My old mustang had hydraulic assist it leaked like crazy 😜

[@RufiXcon]

Heey brother , can u tell shoot me a message on what set up u are running I really would like to run that same exact set up not a full assist, I would appreciate it broo